N0042121Q0531 P00001.pdf

1300942152

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose for this amendment is to update the Statement of Work, change the Period of Performance date to 01 Dec 2021 through 30 November 2022 and extend the quote submission deadline to 15 October 2021 by 5:00 pm EST.

1. CONTRACT ID CODE PAGE OF PAGES

1 10

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0042121Q0531

X 9B. DATED (SEE ITEM 11)

01-Sep-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0001

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

05-Oct-2021

CODE

NAWCAD PROCUREMENT GROUP

21983 BUNDY ROAD, BLDG 441

PATUXENT RIVER MD 20670

N00421 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0042121Q0531

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 07-Sep-2021 05:00 PM to 15-Oct-2021 05:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

SOW

Statement of Work Technical Representative Training Services

Aircraft Maintenance for Mechanics and Technicians Fleet Readiness Center Southeast (FRCSE)

05 October 2021

1.0 INTRODUCTION

The FRCSE, Jacksonville, FL F-5 Production Line has the mission of overhauling and repairing F-5 aircraft. This work is performed onboard NAS Jacksonville inside Hangar 1000. Various artisan trades work on these aircraft to include sheet metal, aircraft mechanic, electrician, avionic technician, and aircraft systems inspector.

2.0 SCOPE

The contractor shall provide a technical representative to oversee FRCSE production workers and provide hands-on, practical application instruction for depot level maintenance activities on the F-5 aircraft. The representative will be present during normal working hours for the duration of the period of performance. Normal work hours may extend to 1800 to support B shift, but shall not exceed eight (8) hours in a workday. Overtime is not expected under this contract. The representative will focus on providing familiarization instruction covering aircraft systems and related pertinent maintenance activities. This practical familiarization will provide maintenance technicians with the knowledge and skills to conduct day-to-day maintenance operations in support of this aircraft. The technical representative will provide instruction for, but not limited to, the following topics:

1. Build up wing Leading Edge

2. Hydraulic Systems

a. Flight & Utility

3. Landing Gear

a. Build Up

b. Normal and Emergency Rigging

4. Air Conditioning System/Environmental Control System

5. Oxygen System

6. Fuel system

7. Flaps

a. Leading and Trailing Edge Flap Rigging

8. Horizontal Stab Rigging

a. Inner-connect rigging system

b. Speed Brake Rigging

9. Rudder Rigging

10. Engine

a. Throttle Rigging

b. Engine Trim

c. Afterburner Fuel Control

d. Main Fuel Control

11. SAS System Rigging

12. Canopy Rigging

13. Cockpit Pressurization

In addition, the contractor shall provide maintenance data and solutions that may be outside the immediate expertise of the onsite technical representative.

3.0 GOVERNMENT FURNISHED EQUIPMENT

The Government will provide the contractor with access to Government facilities, appropriate spaces to accommodate the contractor’s computer. The Government will furnish the following for use during training:

F-5 aircraft.

Common hand tools.

Specialized tooling.

Common aircraft support equipment.

Specialized aircraft support equipment.

The contractor shall notify the Government of any additional facility requirements 30 days prior to the start of the period of performance.

4.0 PLACE OF PERFORMANCE

Services will be required onboard Naval Air Station (NAS), Jacksonville Florida.

5.0 PERIOD OF PERFORMANCE

The period of performance will be for one year: 1 December 2021 – 30 November 2022

6.0 TERMS and CONDITIONS

THE STANDARD TERMS AND CONDITIONS INCLUDED WITH CONTRACTOR’S PROPOSAL ARE

APPLICABLE TO THIS PURCHASE ORDER/CONTRACT UNLESS CONTRADICTORY TO ANY

FAR/DFARS CLAUSE IN WHICH CASE THE GOVERNMENT CLAUSE TAKES PRECEDENCE.

7.0 GOVERNMENT POINT OF CONTACT

The Government point of contact is the F-5 Production Execution General Foreman, Clark A. Huffman. Contact information as follows: clark.huffman@navy.mil, (904) 790-7380.

Enclosure (1) - Fleet Readiness Center Southeast Work Restrictions

1. GENERAL

1.1. This attachment covers the most common work restrictions for contractors working at Fleet Readiness Center Southeast (FRCSE) facilities. The contractor shall obtain the necessary passes and/or identification for entry into Naval Air Station (NAS) Jacksonville and FRCSE for all employees prior to commencement of work.

2. CONTRACTOR ACCESS AND USE OF PREMISES

2.1. NAS Jacksonville Base Regulations

2.1.1. Each contractor must identify itself as either a U.S.-owned or a Foreign Owned, Controlled or Influenced (FOCI) entity.

2.1.1.1. A company is considered to be a FOCI entity when a foreign interest has the power, either direct or indirect, whether or not exercised, to direct or decide matters affecting the management or operations of the company in a manner which may result in unauthorized access to classified information or may adversely affect the performance of a classified contract. A FOCI entity must contact the Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR) within 5 days of contract award to begin paperwork necessary to obtain base access in a timely manner. A non-U.S. citizen employed by a FOCI entity is considered a foreign national of the foreign interest’s country. A U.S. citizen employed by FOCI entity is considered a foreign representative of the foreign interest’s country, but access will be managed the same as a foreign national.

2.1.2. The contractor shall be responsible for securing the necessary permits and base access passes for contractor personnel, vehicles and equipment for the duration of the contract. NAS Jacksonville Security Forces reserve the right to refuse to issue a pass to an employee of the contractor for any reason deemed valid by the government.

2.1.2.1. Non-U.S. citizen personnel of a FOCI entity will be required to provide the Security Forces at the NAS Jacksonville Pass and ID Office located at the main gate on Yorktown Avenue with vehicle registration, proof of insurance, driver’s license and passport in order to obtain a pass for entry onto the base.

2.1.2.2. U.S. Citizen Personnel of a FOCI entity will be required to provide the Security Forces with vehicle registration, proof of insurance, driver’s license and second form of picture ID.

2.1.2.3. U.S.-owned company personnel will be required to provide the Security Forces with vehicle registration, proof of insurance and driver’s license.

2.1.2.4. The contractor shall submit Base Access Request Forms (provided by the TPOC/COR) for all contractor and subcontractor personnel, equipment and vehicles to the TPOC/COR or FRCSE Security, complete and in a timely manner, no less than 5 workdays prior to actual visit.

2.1.3. Flight Line Access: Unless otherwise stated in the main body of the Statement of Work, flight line access is not required for this job. Contractor personnel shall not, under any circumstances, enter the flight line, nor shall they solicit FRCSE personnel for tours. Personnel found on the flight line without a valid reason for being there and personnel who do not possess a valid flight line access badge, will be detained by NAS Jacksonville security personnel and will be permanently denied further access to FRCSE and NAS Jacksonville property. The contractor shall report any such violations to the FRCSE TPOC immediately. There are no exceptions to this requirement.

2.1.4. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point.

2.1.5. If you currently have an Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

2.1.6. Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center (VCC) representative. The VCC will pull up your information in the computer, ensuring all information is current and correct. Once your information is validated, a temporary DBIDS credential is provided.

Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days). For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center. The representative will enter base access authorization and then you may proceed to work.

2.1.7. If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

2.1.8. Present a letter or official document from the government sponsoring organization that provides the purpose for your access. Present valid identification, such as a passport or Real ID Act-compliant state driver's license. Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions and several other assessments; after all this is done, you will be provided with your new DBIDS credential. You may now proceed to work.

2.1.9. For additional questions about obtaining a DBIDS card, contact your local base visitor control center.

2.1.10. Truck deliveries to NAS Jacksonville:

2.1.10.1. Are limited to the commercial gate north of Yorktown Avenue on US 17 (Roosevelt Boulevard). To minimize traffic congestion, delivery of materials shall be outside of peak traffic hours (6:00 to 8:00 a.m. and 2:30 to 5:00 p.m.).

2.1.10.2. In order to ensure there are no delays in material delivery, manifests shall bear the contract number, FRCSE building number, the FRCSE TPOC name and telephone number and the contractors name and phone numbers.

2.2. FRCSE Complex Regulations

2.2.1. Contractors shall ensure contractor personnel employed on the FRCSE complex become familiar with and obey all regulations.

2.2.2. Contractor’s Access

2.2.2.1. The contractor’s company must submit an FRCSE Visit Access Request five days in advance of the visit, FRCSE 5500/17, through the Site Protection Division Office, email address jaxs security@navy.mil. This form is reviewed, approved and entered into AMAG, making the requesting employee eligible for a temporary NAS JAX Gate Access Pass.

2.2.2.2. The FRCSE Visit Access Request, FRCSE 5500/17, is submitted for each visit to FRCSE and will indicate the number of days required for facilitating the conduct of business at FRCSE, not to exceed 30 days. If a visit exceeds 30 days, an updated FRCSE Visit Access Request, FRCSE 5500/17, must be submitted at least five days before the request expires. Failure to do so will delay the individuals’ access to the station, as these forms are processed in the order received. (Emergent requirements are handled on a case-by-case basis, depending upon the needs of FRCSE.)

2.2.2.3. Long-term (more than 30 days) contractor personnel must compose a request on company letterhead stationery. For information required to be on the request, contact your FRCSE TPOC/COR.

2.2.2.4. No personnel shall be permitted inside the FRCSE complex that has been previously denied an access badge to any Department of Defense facility, entity or organization.

2.2.2.5. Personnel who do not maintain a valid FRCSE contractor’s badge will not be permitted inside the FRCSE complex.

2.2.2.6. Immediately report instances of lost or stolen badges to the FRCSE security office. Upon completion of the contract and/or termination of the service of any employee, the contractor shall return the badges to the FRCSE security office. Compliance with this requirement is mandatory.

2.2.3. Vehicle Access Pass: Fenced portions of FRCSE Complex require contractor’s to obtain a vehicle access pass. The pass may be obtained from the FRCSE Security Office. Passes will be strictly limited to business vehicles only that are plainly marked with the name, address and telephone number of the business. Personal vehicles are not be permitted inside the FRCSE complex for any reason. All personnel who request a vehicle pass must have a valid driver’s license.

2.2.4. Contractor personnel will not be permitted to enter FRCSE buildings, spaces and areas not covered by this contract except on prior approval of the FRCSE Security Office. Coordinate action with the FRCSE TPOC/COR to obtain such entry approval.

2.2.5. Restrict employees/representatives to the work site and control travel directly to and from the work site. Do not enter any restricted areas unless required to do so and until cleared for such entry, keeping within the limits of the work area and avenues of ingress and egress.

2.2.6. Restore all traffic/parking/security signs and markings, including space numbers, designations and lines, to their original form if such signs/markings are defaced or deleted during repair.

2.2.7. If the building cannot be secured at the end of the workday, coordinate action with the FRCSE Security Office and the FRCSE TPOC to notify the cognizant code to arrange for a security watch. Notification should be provided with sufficient time to arrange for a security watch and limit a non- secure condition to the minimum time possible.

2.2.8. Alcohol, drugs and weapons are prohibited on site. Any person suspected of being under the influence of drugs or alcohol or found carrying any weapon will be promptly removed from the job site and their access badge will be confiscated. Personnel may also be permanently prohibited from entry to NAS Jacksonville and FRCSE property if any of these items are found in their possession. Failure to comply with this requirement may also result in detainment by NAS Jacksonville security personnel. The FRCSE POC will not intercede for the contractor nor contractor personnel on their behalf for any violation of this requirement.

2.2.9. Smoking is not permitted inside government buildings. All personnel shall smoke only in designated smoking areas. Failure to comply may result in reprimand or denial of access to the FRCSE complex.

2.2.10. Working Hours

2.2.10.1. Standard working hours normally consist of an 8-1/2 hour period between 6 a.m. and 2:30 p.m., Monday through Friday (Eastern Time), excluding federal holidays.

2.2.10.2. The contractor shall conduct operations so as to cause the least possible interference with normal operations of the activity and shall coordinate his work with supervisors and other shop personnel in the affected area so as to minimize disruption to production.

2.2.10.3. Any work involving asbestos removal and/or possible disturbance should be scheduled on a Saturday/Sunday or second/third shift and coordinated through the FRCSE TPOC/COR with the FRCSE’s facility Asbestos Program Manager.

2.2.10.4. Work outside regular working hours requires coordination by the FRCSE POC and may also require Procuring Contracting Officer approval. Make request 15 calendar days prior to such work to allow arrangements to be made by the government for coordinating and inspecting the work in progress, giving the specific dates, hours, location, type of work to be performed, contract number and project title. Based on the justification provided, the Procuring Contracting Officer may approve work outside regular hours. During periods of darkness, the different parts of the work shall be lighted in a manner approved by the FRCSE TPOC.

2.2.11. Environmental

2.2.11.1. FRCSE Environmental Guide Spec should be included with the SOW but can also be provided by FRCSE TPOC/COR. Guide spec is an overall guide for all environmental considerations as they pertain to this project at the

FRCSE.

2.2.11.2. The contractor shall comply with all federal, state and local environmental regulations throughout the course of the contract. The contractor shall ensure that their employees are adequately trained to ensure compliance while working on NAS Jacksonville for the FRCSE.

2.2.12. Utility Cutovers and Interruptions

2.2.12.1. Make utility cutovers after normal working hours or on Saturdays, Sundays and federal holidays unless directed otherwise.

2.2.12.2. All utility outages that do not require securing base services (high voltage systems, water/sewer, base compressed air or steam) shall be requested not less than 15 working days in advance from the FRCSE TPOC/COR.

Small outages, such as individual lighting circuits, may be coordinated locally with the shop supervisor responsible for the work area.

2.2.12.3. Utility outages that require securing base services shall be coordinated with the FRCSE TPOC.

2.2.12.4. Approvals of outages are dependent on FRCSE production requirements, and may be denied or cancelled at any time.

2.2.12.5. For operation of station utilities the contractor shall not operate nor disturb the setting of control devices in the station utilities system, including water, sewer, electrical or steam. The government will operate the control devices as required for normal conduct of work. The contractor shall notify the Procuring Contracting Officer giving reasonable advance notice when such operation is required.

2.2.13. Photography & Electronic Devices:

2.2.13.1. Unofficial photography, videography and audio recording is prohibited on NAS Jacksonville and in the FRCSE complex. All camera/cellphone camera usage for photography, videography and audio recording is prohibited without the explicit written consent of the FRCSE Physical Security Manager (code 74400). A Temporary Camera Pass FRCSE 5500/7, must be approved by the Operations Division Director (code 74400).

Special events (e.g., retirement ceremonies, award ceremonies, etc.) are considered preapproved but are limited to the ceremony area.

2.2.13.2. Cellular phones with cameras shall not be operated in camera, video or audio capture mode, to include video-telecommunications, within the FRCSE compound area or FRCSE buildings. Cell phones are not authorized for any telecommunications in and around aircraft, in hangar and industrial spaces or where otherwise posted. All photographic and videography imagery and audio captured shall be provided to the FRCSE security office for review prior to the device, imagery or data being removed from the FRCSE premises. FRCSE ID Application and Acceptance FRCSE 5500/25, is documentation providing confirmation the cell phone user will not utilize the camera function on the cellphone within or in the vicinity of the FRCSE facilities.

2.2.13.3. Laptop, tablet and other handheld computer or computing devices shall be approved in writing by the FRCSE security office and/or the FRCSE Information Systems Security Manager (Code 72600) prior to the device being brought into FRCSE spaces.

2.2.13.4. Electronic devices shall not be introduced to, or used in, Secure Areas, Restricted Access Areas or Controlled Access Areas while classified materials, information or operations are present.

2.2.13.5. Anyone violating this policy is subject to device confiscation.

2.2.13.6. Electronic devices confiscated may be sanitized or processed for destruction at the discretion of the Commanding Officer.

2.2.14. Tool and Material Controls:

2.2.14.1. The FRCSE complex is a constrained working area where aircraft and components are open and exposed.

The contractor shall take steps to ensure no tools nor materials come in contact with equipment, aircraft or aircraft components. The contractor shall also ensure no tools nor materials are left in the building.

2.2.14.2. The contractor shall limit the amount of material stored on-site. Material shall be brought to the job site in amounts sufficient to perform the work on a daily basis. The contractor shall remove demolished materials from the job site at the end of the workday and shall not store demolished materials at the lay-down area for more than one week.

2.2.14.3. All unused material shall be removed from the work site and stored in the lay-down area or contractor’s shop at the end of the workday. All equipment shall be conspicuously marked for identification.

2.2.14.4. The contractor shall take special precautions when working around the aircraft and components. All tools shall be secured to the lift or person by a lanyard. The contractor shall ensure the space below his working area is covered or protected from damage by falling tools or materials. If a falling object strikes any aircraft or aircraft components the worker shall notify the nearest shop person immediately. Failure to notify shop personnel shall be grounds for permanent removal of the worker from the job site. There are no exceptions.

2.2.14.5. When working within an aircraft line, contractor personnel shall check in with the local Quality Assurance personnel for inventory of tools to be used. This can be coordinated through your contract TPOC/COR.

2.2.14.6. All tools used on the job shall be marked with the name of the owner or the company. All tools shall be controlled by the worker and shall not be left unattended in the building at any time. Contractor supervisory personnel shall remind the workforce DAILY of this requirement and shall enforce the requirement for the duration of the job. All tools left unattended will be confiscated by shop personnel or by the FRCSE TPOC/COR. Unmarked tools will be returned to the contractor at the end of the workday.

2.2.15. Cleanliness Controls

2.2.15.1. All work shall be performed in a neat and orderly manner. Workspace cleanup shall be mandatory before, during and at the close of the workday for the entire duration of the contract. The contractor shall ensure the job site is clean and free from debris and foreign materials at all times.

2.2.15.2. The contractor shall perform a walk down of the area at the close of each workday to verify the area is clean and that all surplus material is removed from the building.

3. OPERATIONS SECURITY (OPSEC):

3.1 The contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of controlled unclassified information and to control distribution of controlled unclassified information in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM) and SECNAV M-5510.36. All contractor facilities shall provide an appropriate means of storage for controlled unclassified information and materials. All controlled unclassified information shall be appropriately identified and marked as For Official Use Only (FOUO) in accordance with DoDM 5200.01, Information Security Program:

Controlled Unclassified Information (CUI) Volume 4 (enclosure 3).

3.2 The contractor shall develop, implement and maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment and material used or developed by the contractor and any subcontractor during performance of this contract. The contractor shall also be responsible for the subcontractor implementation of the OPSEC requirements. This program may include Information Assurance and Communications Security (COMSEC). The OPSEC program shall be in accordance with National Security Decision Directive (NSDD) 298, and at a minimum shall include:

1) Assignment of responsibility for OPSEC direction and implementation.

2) Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3) Establishment of OPSEC education and awareness training.

4) Provisions for management, annual review and evaluation of OPSEC programs.

5) Flow down of OPSEC requirements to subcontractors when applicable.

3.3 While performing aboard NAVAIR or NAVAIR sites, the contractor shall comply with facility OPSEC program instructions and contribute to organization-level OPSEC efforts. Include OPSEC as part of its ongoing security awareness program and take all required agency training. Be responsive to the supporting OPSEC manager on a non-interference basis. Protect sensitive unclassified information and activities, which could compromise classified information or operations or degrade the planning and execution of operations performed by the Requiring Organization (RO) and contractor in support of the mission.

4. JOINT BASE OPERATING SUPPORT (JBOS) CONTRACTOR:

4.1 The JBOS contractor is retained by the government to perform certain facility maintenance support services. Many FRCSE equipment projects require some interface and coordination with the JBOS contractor for utility or other services. The contractor shall coordinate with the FRCSE TPOC/COR for services available from the JBOS contractor.

4.2 The contractor shall not assume the JBOS contractor is available for non-reimbursable work for bidding, planning, production or modification purposes. Any arrangements with the JBOS contractor personnel for work associated with this contract shall be strictly the fiscal responsibility of the contractor and will not be assumed by the FRCSE or by any other government entity and may not be added to the contract for reimbursement.

4.3 Services Expressly the Responsibility of the JBOS contractor: The JBOS contractor is responsible for fire alarm services, utility services and outage coordination, facility maintenance and repair, equipment maintenance and repair and grounds maintenance. The contractor shall coordinate all work with the JBOS contractor through the FRCSE TPOC where such work is to be performed on equipment or facilities that are the responsibility of the JBOS contractor.

SECTION F - DELIVERIES OR PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 30-SEP-2021 TO

29-SEP-2022

N/A N/A

FOB: Destination

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 01-DEC-2021 TO

30-NOV-2022

N/A N/A

FOB: Destination

(End of Summary of Changes)