SOW_MQ25A_GDP_BSS_11022018.docx

Statement of Work for:

MQ25A GDP Best Source Selectors

· Background The Atlantic Test Range, Telemetry Branch Team is procuring Best Source Selector and Bit Synchronizer for the MQ25A Stingray Project.

· Scope The Real-Time Telemetry Processing System (RTPS) provides processing and display of data which is collected and transmitted as telemetry signals from the aircraft or other test article. RTPS receives the telemetry signals, decodes each individual measurement included in the signals received, computes additional "derived measurements' needed, and makes all measurements available for display in a Project Engineer Station (PES). The actual data displays are then selected by the Flight Test Engineers according to the requirements of the specific test being conducted. RTPS operations are conducted and data processed in a sequential collection of equipment called a stream.

· Objectives/Tasks This Best Source Selectors use signal/data quality from multiple antennas to provide mission data with fewer dropouts providing enhanced decision quality data for the platform customer (P155 Stingray, F35, F18, V22, etc.). The GDP Best Source Selector is the only product that works with the encapsulated data from GDP Bit Syncs already installed at RTPS antenna sites and will mirror the capabilities in other RTPS project engineering stations. Remotely located GDP Bit Synchronizer Encapsulators provide signal quality information within the Encapsulated data stream, which is used in the best source decision process.

· Delivery A. (2), Sixteen Channel Unit with Four BSS Group Outputs, MD2267B-M16-04 B. (2), Ethernet Remote Control , OP2267B-22 C. (2), Extended Bit Rate – 16 Channels (40Mbps), OP2267B-01 D. (2), Chassis Slides, OP2267B-89 E. (6), Squid cables – Bit Sync TTL CLK and Data (These come in sets of 4 cables),781-100245-04-xx

All required support should be delivered to the Government within 90 days after receipt of an order.

· Period of performance

Award – 15 Feb 2019