N0042119Q0483.docx

N0042119Q0483

Section A - Solicitation/Contract Form

SOLICITATION

Solicitation N00421-19-Q-0483 is issued as a combined synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on sole source basis with Cytec Engineered Materials , under the authority of FAR Part 12, FAR Part 13, and FAR Part 52.219-6. Offerors must be registered in the System for Award Management (https://www.sam.gov/sam/) database prior to submission of an offer to be considered for award of any DoD contract.

Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received by 7:00am on July 25, 2019. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for determining whether to conduct a competitive procurement. The Government will not pay for any information received. For information contact: Michael Coffey via email: Michael.j.coffey5@navy.mil or by phone at 301-342-2556.

*YOU MUST SUBMIT SIGNED DOCUMENTATION VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR*

Section B - Supplies or Services and Prices

CYCOM 7714A/M46J 12K 24"

FFP

Composite Materials (CYCOM 7714A / M46J 12K 24")

30,000 inches delivered to:

NIAR Composites Laboratory 4004 N. Webb Road Wichita, KS 67226 Attn: Caleb Saathoff

2400 inches delivered to:

Naval Air Station Patuxent River Hazmat Building 2385 Attn: Jillian Gill/Al Huseman 22680 Hammond Road Patuxent River, MD 20670

FOB: Destination

MFR PART NR: CYCOM 7714A/M46J 12K 24"

PURCHASE REQUEST NUMBER: 1300799814

PSC CD: 9390

NET AMT

TAG ON FEE (30994011)

TAG ON FEE (30994011)

FOB: Destination

MFR PART NR: TAG ON FEE (30994011)

NET AMT

FREIGHT CHARGES (30990031)

FREIGHT CHARGES (30990031)

FOB: Destination

MFR PART NR: FREIGHT CHARGES (30990031)

NET AMT

DRY ICE CHARGE (30999013)

DRY ICE CHARGE (30999013)

FOB: Destination

MFR PART NR: DRY ICE CHARGE (30999013)

NET AMT

TEMPERATURE RECORDER (30990020)

TEMPERATURE RECORDER (30990020)

FOB: Destination

MFR PART NR: TEMPERATURE RECORDER (30990020)

NET AMT

Section C - Descriptions and Specifications

STATEMENT OF WORK

Purchase Description Composite Material Purchase

Period of purchase, 2 months from award of contract.

Purchase Description:

Purchase of M46J/7714A 12K 24” in accordance with ACS-MRS-5002 Rev F, CN A052.

Total amount of material to be purchased is 2700 (+/- 10%) linear feet (does not meet MOQ). All material shall be fabricated on the same date and from the same run, and be released on the same date.

Must be stored at or below 0°F.

One temperature recorder (USB capable) shall be included in each box.

An SDS shall be included with each material.

Shipping shall be coordinated by Cytec Engineered Materials. The material shall be shipped at a temperature that shall not degrade the performance of the material upon arrival at the purchaser. Dry ice shall be included in each box if not being shipped by freezer truck. All materials shall be shipped IAW federal, state, and locals laws and regulations.

Material shall be shipped to the following locations, arriving no later than 9/1/19:

Reason for purchase:

The materials listed above will be used by NIAR to support the STTR program, and used by NAVAIR to support the Triton repair development program.

SDS SHEETS

SDS: 0059254

Date Prepared: 02/06/2017

SAFETY DATA SHEET

1. IDENTIFICATION

Product Name: CYCOM7714A Prepreg Product Description: Modified epoxy resin on structural carrier Synonyms: None Chemical Family: Epoxy Molecular Formula: Mixture Molecular Weight: Mixture Intended/Recommended Use: Engineered material composite

CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETON, NEW JERSEY 08540, USA

For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357- 3193.

EMERGENCY PHONE (24 hours/day) - For emergency only involving spill, leak, fire, exposure or accident call:

Asia Pacific:

Australia - +61 2 8014 4558 (Carechem24) China (PRC) - +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24) New Guinea - +61 2 8014 4558 (Carechem24) New Zealand - +64 9 929 1483 (Carechem24) India, Japan, Korea, Malaysia, Thailand - +65 3158 1074 (Carechem24 Singapore) India (Hindi Speaking Only) - +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore) Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC) Europe/Africa/Middle East (Carechem24 UK):

Europe, Middle East, Africa, Israel - +44 1235 239 670 (Arabic speaking countries) - +44 1235 239 671 Latin America:

Brazil - +55 11 3197 5891 (Carechem24) Chile - +56 2 2582 9336 (Carechem24) All Others - +44 1235 239 670 (Carechem24 UK) USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)

2. HAZARDS IDENTIFICATION

GHS Classification Carcinogenicity Hazard Category 2 Specific Target Organ Toxicity - Repeated Exposure Hazard Category 2 Skin Corrosion / Irritation Hazard Category 2 Skin Sensitizer Hazard Category 1B

LABEL ELEMENTS

Signal Word Warning Hazard Statements Suspected of causing cancer May cause damage to organs through prolonged or repeated exposure Causes skin irritation May cause an allergic skin reaction Precautionary Statements Obtain special instructions before use.

Wear protective gloves/protective clothing/eye protection/face protection.

Do not breathe dust/fume/gas/mist/vapours/spray.

Wash face, hands and any exposed skin thoroughly after handling.

Contaminated work clothing should not be allowed out of the workplace.

IF exposed or concerned: Get medical advice/attention.

Get medical advice/attention if you feel unwell.

IF ON SKIN: Wash with plenty of soap and water.

Specific treatment (see supplemental first aid instructions on this label).

Take off all contaminated clothing and wash it before reuse.

If skin irritation or rash occurs: Get medical advice/attention.

Store locked up.

Dispose of contents/container in accordance with local and national regulations.

Hazards Not Otherwise Classified (HNOC), Other Hazards By excessive exposure to dust, eye and respiratory tract irritation is possible.

Use mechanical exhaust ventilation when heat-curing material.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance, Mixture or Article? Article

HAZARDOUS INGREDIENTS

Component / CAS No. % GHS Classification Carcinogen Phenolic epoxy resin #1 10-30 Skin Irrit. 2 (H315) Eye Irrit. 2A (H319) Skin Sens. 1B (H317) Aquatic Acute 2 (H401) Aquatic Chronic 2 (H411) Epoxy/Phenolic resin 10 - 15 Skin Irrit. 2 (H315) Skin Sens. 1B (H317) Aquatic Acute 2 (H401) Aquatic Chronic 2 (H411) Phenolic epoxy resin #2 5 - 10 Skin Irrit. 2 (H315) Eye Irrit. 2A (H319) Skin Sens. 1B (H317) Aquatic Acute 2 (H401) Aquatic Chronic 2 (H411) Antimony trioxide 1309-64-4 1 - 5 Carc. 2 (H351) IARC 2B

ACGIH A2

Arsenic 7440-38-2 <0.01 Carc. 1A (H350) Acute Tox. 3 (H301) Acute Tox. 3 (H331) Skin Irrit. 2 (H315) Eye Dam. 1 (H318) Aquatic Acute 1 (H400) Aquatic Chronic 1 (H410) OSHA(as Arsenic inorganic compounds) CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 2 of 13 Component / CAS No. % GHS Classification Carcinogen Aliphatic amine #3 3-7 Not Classified - Urea, N''-(3,4-dichlorophenyl)-N,N-dimethyl- (Diuron) 330-54-1 1- 5 Carc. 2 (H351) Acute Tox. 4 (H302)

STOT RE 2 (H373)

Aquatic Acute 1 (H400) Aquatic Chronic 1 (H410) Carbon Fiber 7440-44-0 40 - 70 Not Classified - Poly(aromatic glycidyl ether) #2 10-30 Skin Irrit. 2 (H315) Eye Irrit. 2A (H319) Skin Sens. 1B (H317) Aquatic Acute 2 (H401) Aquatic Chronic 2 (H411) The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a trade secret.

Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.

See Section 16 for full text of H phrases.

4. FIRST AID MEASURES

DESCRIPTION OF FIRST AID MEASURES

Eye Contact:

Not an expected route of exposure.

Skin Contact:

Wash immediately with plenty of water and soap. Remove contaminated clothing and shoes without delay. Obtain medical attention. Do not reuse contaminated clothing without laundering. Destroy or thoroughly clean shoes before reuse.

Ingestion:

Not an expected route of exposure.

Inhalation:

Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.

MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED

None known

INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS

Not applicable

5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media:

Use water spray or fog, carbon dioxide or dry chemical.

Extinguishing Media to Avoid:

full water jet CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 3 of 13 Protective Equipment:

Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See MSDS Section 8 (Exposure Controls/Personal Protection).

Special Hazards:

None known

6. ACCIDENTAL RELEASE MEASURES

Personal precautions:

Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.

Methods For Cleaning Up:

Sweep up into containers for disposal. Flush spill area with water.

References to other sections:

See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE

HANDLING

Precautions: Wash hands thoroughly after handling. Wear protective gloves. Contaminated work clothing should not be allowed out of the workplace. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.

Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat, smoke and possibly fire. This material contains a small amount of flammable or combustible liquid and vapor. Keep away from heat, sparks, and flame. Provide good ventilation of working area (local exhaust ventilation if necessary).

STORAGE

Store in accordance with local, state, and federal regulations.

Storage Temperature: Store at <-12 °C 10 °F Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures:

Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided to control exposure when spraying or curing at elevated temperatures.

Respiratory Protection:

Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure. A full facepiece respirator also provides eye and face protection. Cutting, grinding or sanding of parts fabricated after curing may create respirable dust particles. Respiratory protection appropriate for this dust may be required. Refer to components listed above for potential hazardous components in the dust.

Eye Protection:

Wear eye/face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety shower should be provided in areas of potential exposure.

CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 4 of 13 Skin Protection:

Avoid skin contact. Wear impermeable gloves and suitable protective clothing. Barrier creams may be used in conjunction with the gloves to provide additional skin protection.

Hand Protection:

Nitrile or fluorinated rubber gloves. Consider the porosity and elasticity data of the glove manufacturer and the specific conditons in the work place. Replace gloves immediately when torn or any change in appearance (dimension, colour, flexibility etc) is noticed. Barrier creams may help to protect the exposed areas of the skin, they should however not be applied once exposure has occurred.

Additional Advice:

Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use. Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water. It is recommended that a shower be taken after completion of workshift especially if significant contact has occurred. Work clothing should then be laundered prior to reuse. Street clothing should be stored separately from work clothing and protective equipment Work clothing and shoes should not be taken home.

Exposure Limit(s) The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Color: black Appearance: resin impregnated on structural fabric or fiber Odor: faint epoxy Boiling Point: Not applicable Melting Point: Not applicable Vapor Pressure: Not applicable Specific Gravity/Density: Not available Vapor Density: Not applicable Percent Volatile (% by wt.): Not available pH: Not applicable Saturation In Air (% By Vol.): Not applicable Evaporation Rate: Not applicable Solubility In Water: Not available ACGIH (TLV): Not established 330-54-1 Urea, N''-(3,4-dichlorophenyl)-N,N-dimethyl- (Diuron) Other Value: 3 fibers/cc (Cytec) 1309-64-4 Antimony trioxide OSHA (PEL): Not established Date Prepared: 02/06/2017 ACGIH (TLV): 10 mg/m3 (TWA)

OSHA (PEL):

Other Value: Not established

0.5 mg/m3 (TWA)(as Antimony compounds) 7440-38-2 Arsenic OSHA (PEL): 10 μg/m3 (TWA)(as Arsenic inorganic compounds) 10 μg/m3 TWA(as Arsenic inorganic compounds) 5 μg/m3 Action Level ACGIH (TLV): 0.5 mg/m3 Sb (TWA)(as Antimony compounds) ACGIH (TLV): 0.01 mg/m3 (TWA) CYCOM7714A Prepreg Other Value: Not established

SDS: 0059254

7440-44-0 Carbon Fiber Other Value: Not established OSHA (PEL): Not established

9. PHYSICAL AND CHEMICAL PROPERTIES

Volatile Organic Content: Not applicable Flash Point: Not applicable Flammability (solid, gas): Not available Flammable Limits (% By Vol): Not applicable Autoignition (Self) Temperature: Not available Decomposition Temperature: Not available Partition coefficient (noctanol/ water):

Not available Odor Threshold: Not available Viscosity (Kinematic): Not applicable

DUST HAZARD INFORMATION

Particle Size (microns): Not applicable Kst (bar-m/sec): Not applicable Maximum Explosion Pressure (Pmax): Not applicable Dust Class: Not applicable Minimum Ignition Energy (MIE) (mJ): Not applicable Minimum Ignition Temperature (MIT) (°C): Not applicable Minimum Explosive Concentration (MEC) (g/m3): Not applicable Limiting Oxygen Concentration (LOC) (%): Not applicable

10. STABILITY AND REACTIVITY

Reactivity: No information available Stability: Stable Conditions To Avoid: Avoid exposure to heat.

Polymerization: May occur Conditions To Avoid: Protect from heat.

Materials To Avoid: Oxidizing agents Acids Amines Bases Hazardous Decomposition Products:

aldehydes oxides of carbon Oxides of nitrogen isocyanate phenolics When heated to decomposition, it emits toxic fumes.

hydrocarbons cyanic acid cyanogens amides carbamates

11. TOXICOLOGICAL INFORMATION

PRODUCT TOXICITY INFORMATION

Likely Routes of Exposure: Skin.

CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 6 of 13

ACUTE TOXICITY DATA

LOCAL EFFECTS ON SKIN AND EYE

ALLERGIC SENSITIZATION

GENOTOXICITY

Assays for Gene Mutations

OTHER INFORMATION

The product toxicity information above has been estimated.

HAZARDOUS INGREDIENT TOXICITY DATA

Sensitization rabbit skin Date Prepared: 02/06/2017 Sensitizing Acute LD50 Sensitization respiratory .>2000 mg/kg Not an expected route of exposure inhalation oral (gavage) Ames Salmonella Assay rat No data Acute LC50 4 hr .Not an expected route of exposure rat CYCOM7714A Prepreg Acute Irritation Phenolic epoxy resin #1 has acute oral (rat) and dermal (rabbit) LD50 values of 30 g/kg and >2000 mg/kg. A 4-hour inhalation LC50 (rat) value of >700 mg/m3 has been reported. Prolonged or repeated exposure may cause primary skin irritation and allergic skin reactions in some instances. Mechanical action of this resin may cause eye irritation upon contact. This resin has produced moderate eye irritation in laboratory animals. This resin has been reported to have tested positive for mutagenicity in the standard Ames screening test as well as in a mouse lymphoma cell point mutation assay. The literature reports several cases of asthmatic symptoms developing in workers due to occupational exposure to this resin. Large oral doses of Phenolic epoxy resin #1 have produced central nervous system effects in laboratory animals.

Acute LD50 skin Epoxy/Phenolic resin has acute oral (rat) and dermal (rabbit) LD50 values of >2000 mg/kg and 4000 mg/kg, respectively.

Direct contact may cause mild eye irritation. Prolonged or repeated dermal exposure may cause irritation. This material may cause allergic skin reactions in rare instances. This polymer has been reported to have tested positive for mutagenicity in the standard Ames screening test as well as in a mouse lymphoma cell point mutation assay.

Irritating .Not an expected route of exposure Phenolic epoxy resin #2 has reported acute oral (rat) and acute dermal (rabbit) LD50 values of >15000 mg/kg and >20000 mg/kg, respectively. Direct contact with this material may cause moderate skin and eye irritation. Prolonged or repeated contact is expected to cause dermal sensitization. In vitro genetic toxicity studies have produced equivocal results (some positive; other negative). In vivo genetic studies have produced negative results. Phenolic epoxy resin #2 is acid is classified under IARC - Group 3: Not classifiable as to its carcinogenicity to humans.

Acute Irritation

SDS: 0059254

Antimony trioxide has an acute oral (rat) LD50 value of greater than 20,000 mg/kg. Direct contact with antimony trioxide causes mild eye and skin irritation. Inhalation may also cause respiratory tract inflammation. Ingestion will cause mild irritation to the mouth, nose, stomach and intestines. In carcinogenicity tests, female rats showed a significant increase in the incidence of lung tumors, while no tumors were seen in males. This material was mutagenic in an in vivo test.

Antimony trioxide is a chemical known to the State of California to cause cancer.

eye Not an expected route of exposure dermal CYCOM7714A Prepreg Page 8 of 13 Urea, N'-(3,4-dichlorophenyl)-N,N-dimethyl- (Diuron) has acute oral female (rat) LD50 values ranging from 1,017-4150 mg/kg. The acute dermal (rabbit) LD50 was reported to be >5,000 mg/kg. The acute 4-hour inhalation (rat) LC50 was >5.05 mg/L (aerosol - max. achievable atmosphere concentration). This substance was non-irritating to rabbit skin and eyes and was not a dermal sensitizer in guinea pigs. Diuron is not mutagenic to the HPRT-locus in the CHO test system;

non-mutagenic in the Ames assay and non-clastogenic in both in vitro and in vivo Chromosomal Aberrations assays. In a repeated dose dermal toxicity study rabbits were exposed to 50 and 250 mg/kg bw/d of Diuron for five days per week over three weeks. The repeated dermal exposure to Diuron revealed no toxicologically relevant effects on rabbits.

Therefore, the NOAEL was established at 250 mg/kg bw, the highest dose tested. In a subacute inhalation study rats were exposed to nominal doses of 0, 20, 150 and 1000 mg/m3 (anal. conc. achieved: 0, 4.1, 37.4 and 268.1 mg/m³) of an aerosol of Diuron for 6 h per day, 5 days per week for 14 or 28 days. At all rats exposed to concentrations up to 37.4 mg/m³ Diuron did not exhibit prominent test item-related signs of adverse effects. Therefore the LOAEC was determined to be 268.1 mg/m³ in males and 37.4 mg/m³ in females based on significant alterations in hematologic parameters and dark, enlarged spleens at higher dose levels. The NOAEC was assessed to be 37.4 mg/m³ for male and 4.1 mg/m³ for female animals. In a 90-day repeat dose oral toxicity study rats received diets containing 0, 100, 250 and 2500 ppm Diuron, equivalent to a mean test article intake of 0, 6.7, 17.0 and 176 mg/kg bw/day for males and 0, 8.7, 23.3 and 214 mg/kg bw/day for females. The NOAEL of 6.7 mg/kg bw/day was established for males. No NOAEL for females could be set; the LOAEL was 8.7 mg/kg bw/day for females. The LOAEL for females was based on adverse hyperplasia of renal and pelvic mucosa and urinary bladder mucosa and adverse hematological alterations at 250 ppm and above. A 12-month chronic toxicity study was conducted with Beagle dogs receiving 0, 50, 300 or 1800 ppm of Diuron, mixed into the standard dog diet. All animals survived and no treatment-related clinical signs were observed but effects on red blood cell parameters indicated a hypochromic hemolytic process from 300 ppm onwards. The NOAEL was established at ~1.8 mg/kg/d (50 ppm) for both sexes and the LOAEL was assessed to be ~11 mg/kg bw/d (300 ppm), based on hemolytic anemia, pigmentation of liver, kidneys and spleens and altered organ weights. Urea, N'-(3,4-dichlorophenyl)-N,Ndiemthyl- (Diuron): In a combined chronic toxicity/carcinogenicity study rats were administered 25, 250, or 2500 ppm of Diuron in the feed for 24 months. The mortality rates were low overall and did not correlate with doses whereas the intake of 2500 ppm resulted in an increased incidence of neoplasia of the urothelium in both sexes. Considering severe hyperplasia as a possible early stage of neoplastic alterations, the NOAEL for carcinogenic effects was between 1.0 and 10 mg/kg bw/d for males and 1.7 and 17 mg/kg bw/d for females. For chronic effects Diuron-treatment led to erythrocyte damage in females at 25 ppm and above, thus no NOAEL for females could be set. In males, the NOAEL is 1.0 mg/kg bw/d based on effects on spleen and blood cells. In a two-generation study four groups of rats (30 males and 30 females per group) received Diuron at 0, 10, 250 or 1750 ppm in the diet for < 70 days prior to mating, then during the mating period and finally during pregnancy and weaning. Under the conditions of this study, Diuron exhibited no adverse effects on reproductive parameters. The NOAEL of the parent male and female was 14.8 mg/kg bw/day and 18.5 mg/kg bw/day, respectively. This was based on reduced body weight, body weight gain, and food consumption in parental rats in the 1750 ppm dose. The NOAEL for the F1 males and females were 18.9 mg/kg bw/day and 22.1 mg/kg bw/day, respectively. This was based on reduced body weight in pups in the 1750 ppm dose group. In a prenatal developmental toxicity study female rats were dosed (oral gavage) at 0, 2, 10, and 50 mg Diuron /kg bw/d on days 7 through 19 of presumed gestation. Overall, a statistically significant decreasing average daily food consumption and body weight gain was observed for the top dose on days 13 to 20, resulting in significant weight loss to day 20, so that the NOAEL of maternal toxic effects is set 10 mg/kg bw/d. In contrast, Diuron did not adversely affect the development of the offspring at the top dose. Therefore, the NOAEL of embryotoxic / teratogenic effects is assessed to 50 mg/kg bw/d. In a second prenatal development toxicity study female rats were dosed (oral gavage) at 0, 16, 80, and 400 mg Diuron/kg bw once daily on days 6 through 15 of presumed gestation. As administration of 80 and 400 mg/kg/d caused significantly reduced feed consumption and loss of body weight during the period of treatment the NOAEL of maternal toxic effects is determined to be 16 mg/kg bw/d. For fetuses average body weights were significantly decreased for the high dosage group litters and skeletal alterations and delayed ossifications were observed. The NOAEL of embryotoxic/teratogenic effects is set to 80 mg/kg bw/d.

SDS: 0059254 Date Prepared: 02/06/2017 Carbon fibers may cause mechanical irritation of the eyes, skin, nose and throat. Airborne carbon fibers are not considered respirable. A typical carbon fiber may be characterized as having a diameter of 5-7 microns and a length greater than 100 microns. Fibers with diameters greater than 3.5 microns are not considered respirable.

The chemical, physical, and toxicological properties of this material have not been fully investigated. The acute oral (mouse) and acute oral (rat) LD50 values for arsenic has been reported to be 145 mg/kg and 763 mg/kg, respectively.

The estimated acute (inhalation) 4-hr (rat-dust) LC50 value is >0.5-1.0 mg/L. Absorption into the body leads to the formation of methemoglobin which in sufficient concentration causes cyanosis. Direct contact with this substance is expected to cause moderate skin irritation and serious eye damage. Arsenic and arsenic compounds are classified as Carcinogenic to Humans by IARC (Group1) and Known to be a human carcinogen by NTP.

California Proposition 65 Warning (applicable in California only) - This product contains (a) chemical(s) known to the State of California to cause cancer and birth defects or other reproductive harm.

12. ECOLOGICAL INFORMATION

TOXICITY, PERSISTENCE AND DEGRADABILITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER

ADVERSE EFFECTS

Environmental exposure from substances of this preparation are limited due to the physical form of the product.

This material is not classified as dangerous for the environment.

RESULTS OF PBT AND vPvB ASSESSMENT Not determined

HAZARDOUS INGREDIENT TOXICITY DATA

Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea Phenolic epoxy resin #1 Not available Not available Not available Epoxy/Phenolic resin Not available Not available Not available Phenolic epoxy resin #2 ErC50 = 11 mg/L - Green Algae (72h) LC50 = 2.0 mg/L - Rainbow Trout (96h) Not available Antimony trioxide 1309-64-4 EC50 0.63 - 0.8 mg/L - Pseudokirchneriella subcapitata (72h) EC50 0.65 - 0.81 mg/L - Pseudokirchneriella subcapitata (96h) LC50 > 1000 mg/L - Brachydanio rerio (96h) static LC50 > 80 mg/L - Pimephales promelas (96h) static EC50 361.5 - 496.0 mg/L - Daphnia magna (48h) Static EC50 > 1000 mg/L - Daphnia magna (48h) Arsenic 7440-38-2 LC/EC50s <1 mg/L - Algae (72h) LC/EC50s <1 mg/L - Fish (96h) LC/EC50s <1 mg/L - Daphnia magna (48h) Aliphatic amine #3 Not available Not available Not available Date Prepared: 02/06/2017 Poly(aromatic glycidyl ether) # 2 has oral (rat) LD50 and dermal (rabbit) LD50 values of >5,000 mg/kg and >6,000 mg/kg, respectively. This material produced moderate eye and skin irritation in animal tests. It is a moderate skin sensitizer. No adverse effects were observed on embryonic or fetal development in animal teratology studies. A variety of mutagenicity tests produced mixed results. Two-year chronic studies (dermal and skin painting) in mice showed no increase in tumor incidence in two mouse strains. However, a third mouse strain showed a slight increase in tumors at a high dose. IARC concluded that this material is not classified as a carcinogen. Chronic ingestion caused reduced weight gain and death in laboratory animals. The oral (rat) LD50 and dermal (rabbit) LD50 values have also been reported to be 11.4 gm/kg and >20 ml/kg, respectively. The literature reports three cases of asthmatic symptoms developing in workers due to occupational exposure.

CYCOM7714A Prepreg SDS: 0059254 Page 9 of 13 Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea Urea, N''-(3,4-dichlorophenyl)- N,N-dimethyl- (Diuron) 330-54-1 EC50 = 0.022 mg/L - Desmodesmus subspicatus (96h) EC50 = 0.039 mg/L - Desmodesmus subspicatus (72h) LC50 = 14.7 mg/L - Oncorhynchus mykiss (96h) EC50 = 1.4 mg/L - Daphnia magna (48h) Carbon Fiber 7440-44-0 Not available Not available Not available Poly(aromatic glycidyl ether) #2 Not available Not available Not available

13. DISPOSAL CONSIDERATIONS

The information on RCRA waste classification and disposal methodology provided below applies only to the product, as supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent upon whether a material is a RCRA "listed hazardous waste" or has any of the four RCRA "hazardous waste characteristics." Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA "listed hazardous waste"; information contained in Section 15 of this MSDS is not intended to indicate if the product is a "listed hazardous waste." RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section 261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS (flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10 (incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.

The Company has provided the foregoing for information only; the person generating the waste is responsible for determining the waste classification and disposal method.

14. TRANSPORT INFORMATION

This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific requirements.

US DOT

Dangerous Goods? X Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s.

Hazard Class: 9 Packing Group: III UN/ID Number: UN3077 Transport Label Required: Miscellaneous Technical Name (N.O.S.): Urea, N'-(3,4-dichlorophenyl)-N,N-dimethyl-, Antimony trioxide, Arsenic Component / CAS No. Hazardous Substances / Reportable Quantity of Product (lbs) Antimony trioxide 20000 Urea, N''-(3,4-dichlorophenyl)- N,N-dimethyl- (Diuron) Arsenic 20000 Comments: Hazardous Substances/Reportable Quantities - DOT requirements specific to Hazardous Substances only apply if the quantity in one package equals or exceeds the product reportable quantity.

TRANSPORT CANADA

CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 10 of 13 Dangerous Goods? Not applicable/Not regulated

ICAO / IATA

Dangerous Goods? Not applicable/Not regulated

IMO

Dangerous Goods? Not applicable/Not regulated

15. REGULATORY INFORMATION

Inventory Information United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not required to be listed on the TSCA Chemical Inventory.

Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to be listed on the DSL.

European Economic Area (including EU): This product is an article that does not intentionally release substances under normal conditions of use and is therefore exempt from the registration requirements under the REACH Regulation (EC) No. 1907/2006.

Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS) or are not required to be listed on AICS.

China: All components of this product are included on the Chinese inventory or are not required to be listed on the Chinese inventory.

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be listed on the Japanese inventory.

Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed on the Korean inventory.

Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to be listed on the Philippine inventory.

Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are not required to be listed on the Taiwan inventory.

OTHER ENVIRONMENTAL INFORMATION

The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA (40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311, etc.) See Section 13 for information on waste classification and waste disposal of this product.

Component / CAS No. % TPQ (lbs) RQ(lbs) S313 TSCA 12B Antimony trioxide 1309-64-4 1 - 5 None 1000 Yes No Urea, N''-(3,4-dichlorophenyl)-N,N-dimethyl- (Diuron) 330-54-1 1- 5 None 100 Yes No Arsenic 7440-38-2 <0.01 None 1 Yes No CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 11 of 13

PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA

• Acute

• Chronic

16. OTHER INFORMATION

NFPA Hazard Rating (National Fire Protection Association) Health: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.

Fire: 1 - Materials that must be preheated before ignition can occur.

Instability: 0 - Materials that in themselves are normally stable, even under fire exposure conditions.

Reasons For Issue: Revised Section 1 Date Prepared: 02/06/2017 Date of last significant revision: 02/01/2017 Component Hazard Phrases H315 - Causes skin irritation.

H317 - May cause an allergic skin reaction.

H319 - Causes serious eye irritation.

H401 - Toxic to aquatic life.

H411 - Toxic to aquatic life with long lasting effects.

Date Prepared: 02/06/2017 Antimony trioxide H315 - Causes skin irritation.

H317 - May cause an allergic skin reaction.

H319 - Causes serious eye irritation.

H411 - Toxic to aquatic life with long lasting effects.

H351 - Suspected of causing cancer.

Arsenic Epoxy/Phenolic resin H301 - Toxic if swallowed.

H315 - Causes skin irritation.

H318 - Causes serious eye damage.

H331 - Toxic if inhaled.

H350 - May cause cancer.

H400 - Very toxic to aquatic life.

H410 - Very toxic to aquatic life with long lasting effects.

Urea, N''-(3,4-dichlorophenyl)-N,N-dimethyl- (Diuron) CYCOM7714A Prepreg H302 - Harmful if swallowed.

H351 - Suspected of causing cancer.

H373 - May cause damage to organs through prolonged or repeated exposure.

H400 - Very toxic to aquatic life.

H410 - Very toxic to aquatic life with long lasting effects.

H315 - Causes skin irritation.

H317 - May cause an allergic skin reaction.

H411 - Toxic to aquatic life with long lasting effects.

Poly(aromatic glycidyl ether) #2

SDS: 0059254

H315 - Causes skin irritation.

H317 - May cause an allergic skin reaction.

H319 - Causes serious eye irritation.

H411 - Toxic to aquatic life with long lasting effects.

Phenolic epoxy resin #2 Phenolic epoxy resin #1 Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission, inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and verification. Before using any product, read its label.

CYCOM7714A Prepreg SDS: 0059254 Date Prepared: 02/06/2017 Page 13 of 13

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

JILLIAN GILL

48066 SHAW ROAD

BLDG 2188, ROOM 107

PATUXENT RIVER MD 20670

301-757-8248 FOB: Destination N00421

N00421

N00421

N00421

N00421

CLAUSES INCORPORATED BY REFERENCE

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

_____________COMBO_______________________________________________

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

_______________SEE SECTION E_____________________________________________

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

Ryan Davis Ryan.s.davis1@navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section I - Contract Clauses

CLAUSES INCORPORATED BY FULL TEXT

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(a) Definitions. As used in this clause--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management (SAM) records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that--

(1) The Contractor has entered all mandatory information, including the unique entity identifier and the EFT indicator (if applicable), the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14), into SAM;

(2) The Contractor has completed the Core, Assertions, Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

System for Award Management (SAM) means the primary Government repository for prospective Federal awardee and Federal awardee information and the centralized Government system for certain contracting, grants, and other assistance-related processes. It includes—

(1) Data collected from prospective Federal awardees required for the conduct of business with the Government;

(2) Prospective contractor-submitted annual representations and certifications in accordance with FAR subpart 4.12; and

(3) Identification of those parties excluded from receiving Federal contracts, certain subcontracts, and certain types of Federal financial and non-financial assistance and benefits.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b) If the solicitation for this contract contained the provision 52.204-7 with its Alternate I, and the Contractor was unable to register prior to award, the Contractor shall be registered in SAM within 30 days after award or before three days prior to submission of the first invoice, whichever occurs first.

(c) The Contractor shall maintain registration in SAM during contract performance and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement. The Contractor is responsible for the currency, accuracy and completeness of the data within SAM, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in SAM after the initial registration, the Contractor is required to review and update on an annual basis, from the date of initial registration or subsequent updates, its information in SAM to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(d)(1)(i) If a Contractor has legally changed its business name or ``doing business as'' name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to--

(A) Change the name in SAM;

(B) Comply with the requirements of subpart 42.12 of the FAR; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor shall provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (d)(1)(i) of this clause, or fails to perform the agreement at paragraph (d)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR subpart 32.8, Assignment of Claims). Assignees shall be separately registered in SAM. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the EFT clause of this contract.

(3) The Contractor shall ensure that the unique entity identifier is maintained with the entity designated at www.sam.gov for establishment of the unique entity identifier throughout the life of the contract. The Contractor shall communicate any change to the unique entity identifier to the Contracting Officer within 30 days after the change, so an appropriate modification can be issued to update the data on the contract. A change in the unique entity identifier does not necessarily require a novation be accomplished.

(e) Contractors may obtain additional information on registration and annual confirmation requirements at https://www.sam.gov.

10% Percent increase 10% Percent decrease This increase or decrease shall apply to CLIN 1 .

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted…