20181220_Statement_of_Work_High_Energy_Density_Battery_Cells1.docx
DOCX document 21 KB Posted
- Attached to
- Battery Cells
- Solicitation number
- N0042119Q0137
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N0042119Q0137.doc | DOC document | |
| 20181220_Justification_for_Sole_Source_High_Energy_Density_Battery_Cells....doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page | 5
Statement of Work High Energy Density Battery Cells
Prepared By:
NAVAIR 4.4.5.2
48298 Shaw Road, Bldg. 1461 Patuxent River, MD 20670
Date Prepared: December 20, 2018
Revisions
| REV |
| CHANGE |
| PAGES AFFECTED |
| - |
| Initial Release |
| All |
PREPARATION AND APPROVAL SIGNATURES
Prepared By: _________________________________ Date: ________________________
Approved By: _________________________________ Date: ________________________
Contents
| 1. Introduction | 4 |
| 1.1 Scope | 4 |
| 1.2 Purpose | 4 |
| 2. System Specifications | 4 |
| 3. Task Description | 4 |
| 4. Delivery Requirements | 4 |
| 5. Warranty Requirements | 5 |
| 6. Service Requirements | 5 |
| 7. Supporting Documentation | 5 |
1. Introduction This Statement of Work (SOW) has been developed for the procurement of high energy density battery cells (quantity: 100).
1.1 Scope
This SOW defines the technical, schedule, delivery, and documentation requirements to fulfill the procurement of the high energy density battery cells and supporting documentation.
1.2 Purpose
The purpose of the SOW is to define the technical and physical specifications of the high energy density battery cells being procured from the Contractor, as well as the supporting documentation required to operate the batteries. The Contractor shall deliver the high energy density battery cells to NAVAIR to use for research, development, test, and evaluation (RDT&E) efforts within 90 days after receipt of order (ARO).
2. System Specifications The high energy density battery cells shall meet the specifications shown below.
| • | Battery Type: Secondary (i.e., rechargeable), Silicon-Based Anode |
| • | Cell Format: Pouch |
| • | Battery Cell Capacity: 4.5 Ah ± 0.2 Ah |
| • | Nominal Voltage: within the range of 3.5 – 4.0 V |
| • | Battery Cell Weight: less than or equal to 0.2 pounds |
| • | Operational Temperature: within the range of -10 oC and 40 oC |
| • | Cell Volume (excluding tabs): less than or equal to 0.03 Liters. |
| • | Maximum Pulse Discharge Current: greater than or equal to 4A for a period no less than 20 seconds. |
3. Task Description The Contractor shall deliver the high energy density battery cells and supporting documentation, meeting the requirements in Section 2, to NAVAIR within 90 days from the contract award date.
4. Delivery Requirements The high energy density battery cells and supporting document (see Section 7) shall be delivered within 90 days of the contract award date.
The products and supporting documentation shall be delivered to the following address:
U.S. Naval Air Station Patuxent River 48298 Shaw Road, Bldg. 1461 Patuxent River, MD 20670-1900
5. Warranty Requirements The Contractor is not required to offer a warranty on this product.
6. Service Requirements The Contractor is not required to offer any services on this product.
7. Supporting Documentation The Contractor shall provide the following documentation to enable the end user to operate and maintain the high energy density battery cells, and achieve the performance specified in Section 2. The supporting documentation shall include:
1. Product Specification Sheet
2. Safety Data Sheet
File details come from the government source that posted it.