Corrosion_and_Wear_Lab_SOW_-_Cyclic_Corrosion_Test_Chamber.docx

Statement of Work NAVAIR Patuxent River 4.3.4.6. Corrosion and Wear Lab Cyclic Corrosion Test Chamber for Accelerated Corrosion Experimentation

Location:

Materials Engineering Division NAVAIR 4.3.4.6 – Corrosion and Wear Branch Corrosion and Wear Lab – Room 206 48066 Shaw Road Unit 5 – Building 2188 Patuxent River MD, 20670-1908 TPOC – Anna Safigan (301-995-6549) (anna.safigan@navy.mil) Alt. POC – Victor Rodriguez-Santiago (301-342-8040) (victor.rodriguezsant@navy.mil) Alt. POC – Joseph Ullmann (301-342-8060) (joseph.ullmann@navy.mil)

Equipment Needed:

A small, floor standing cyclic corrosion test chamber and all additional equipment necessary to meet or exceed the following technical requirements. Shipping, Installation, and Warranty, for all equipment shall be included. The chamber must fit in the lab space available (65” long X 36” deep)

· A small, floor standing cyclic corrosion test chamber:

· Shall have a footprint no larger than 65” long X 36” deep

· Shall be capable of salt spray (vertical down)

· Shall be capable of water fog humidity

· Shall control and display temperature over a range of at least -20C to 60C

· Shall control and display humidity over a range of at least 5% to 100%

· Shall have automatic air purge capability with canopy interlock

· Shall have an external salt solution reservoir

· Shall be fully programmable to cycle through spraying, fog, drying, humidity, and holding events for specified periods of time at controlled temperature and humidity without the need of an external computer.

· Shall be capable of data logging and remote programing capabilities with software.

· Shall have Ethernet communications port

· Shall come with a calibration certificate

· Shall be contain no less than six (6) slotted sample racks for coupons at a 15 degree angle.

Estimated Price Estimated Delivery Date September 29th 2016