N00421-12-T-0145 AMENDMENT 1.doc

Section B - Supplies or Services and Prices

P/N: LBT-2033

FFP

PADDED ANTENNA BAG (DC-80) BAG, NAWCAD, ANTENNA (DC-80 DISC-CONE), SIZE (50"L X 5 1/4"W X 3 1/2"D), PADDED, BASE, PIPE, RADIALS

FOB: Origin

PURCHASE REQUEST NUMBER:

ADDITIONAL MARKINGS: MARK FOR: DAVE BORMAN / JBS PROC ID: 12-229046

NET AMT

P/N:LBT-2033

PADDED ANTENNA BAG (DC-80) BAG, NAWCAD, ANTENNA (DC-80 DISC-CONE), SIZE (50"L X 5 1/4"W X 3 1/2"D), PADDED, BASE, PIPE, RADIALS

FOB: Origin

NET AMT

P/N; LBT-2259C

PADDED ANTENNA BAG (DC-190)BAG, ANTENNA (MODEL DC-190), PADDED, CARRY HANDLE WITH STRAP, TWO INTERNAL POCKETS, INTERIOR TIE DOWN STRAPS, SIZE (25'L X 9"W X 9 "H)

FOB: Origin

NET AMT

P/N; LBT-2259C

PADDED ANTENNA BAG (DC-190) BAG, ANTENNA (MODEL DC-190), PADDED, CARRY HANDLE WITH STRAP, TWO INTERNAL POCKETS, INTERIOR TIE DOWN STRAPS, SIZE (25'L X 9"W X 9 "H)

FOB: Origin

NET AMT

P/N; LBT-1736C

PADDED GROUNDING RODS BAGBAG, RODS (GROUNDING), PADDED (1/8"), SIZE (42"L X 4"INSIDE DIAMETER) [OLD LBT-1736 A&B]

FOB: Origin

NET AMT

P/N;LBT-1736C

PADDED GROUNDING RODS BAGBAG, RODS (GROUNDING), PADDED (1/8"), SIZE (42"L X 4"INSIDE DIAMETER) [OLD LBT-1736 A&B]

FOB: Origin

NET AMT

P/N; LBT-1556B

CABLE CARRY BAGBAG, C-CUBED, CARRY, CABLE, ACCESSORY TOTE, NYLON POCKET, VINYL WINDOW (CLEAR), SIZE (22"H X 24"W X 5"D)

FOB: Origin

NET AMT

P/N; LBT-1556B

CABLE CARRY BAGBAG, C-CUBED, CARRY, CABLE, ACCESSORY TOTE, NYLON POCKET, VINYL WINDOW (CLEAR), SIZE (22"H X 24"W X 5"D)

FOB: Origin

NET AMT

P/N; LBT-2559A

BAG, BAE, CARRY, CABLE BAG, BAE, CARRY, CABLE, ACCESS, TOTE, NYLON POCKET, CLEAR VINYL (8 1/2"L X 11"H) WINDOW, SIZE (14"L X 4"W X 14"H) MODIFICATION TO LBT-1556B

FOB: Origin

NET AMT

P/N; LBT-2559A

BAG, BAE, CARRY, CABLEBAG, BAE, CARRY, CABLE, ACCESS, TOTE, NYLON POCKET, CLEAR VINYL (8 1/2"L X 11"H) WINDOW, SIZE (14"L X 4"W X 14"H) MODIFICATION TO LBT-1556B

FOB: Origin

NET AMT

P/N; LBT-2033B

PADDED ANTENNA BAG (252) BAG, PADDED, 252 ANTENNA, DUAL ZIPPER SLIDERS, REINFORCED BOTTOM, INTERNAL ZIPPERED POUCH FOR NUTS/BOLTS

FOB: Origin

NET AMT

P/N;LBT-2033B

PADDED ANTENNA BAG (252) BAG, PADDED, 252 ANTENNA, DUAL ZIPPER SLIDERS, REINFORCED BOTTOM, INTERNAL ZIPPERED POUCH FOR NUTS/BOLTS

FOB: Origin

NET AMT

P/N;LBT-1736C

PADDED GROUNDING RODS BAGBAG, RODS (GROUNDING), PADDED (1/8"), SIZE (42"L X 4"INSIDE DIAMETER) [OLD LBT-1736 A&B]

FOB: Origin

NET AMT

P/N; LBT-1736C

PADDED GROUNDING RODS BAGBAG, RODS (GROUNDING), PADDED (1/8"), SIZE (42"L X 4"INSIDE DIAMETER) [OLD LBT-1736 A&B]

FOB: Origin

NET AMT

P/N; LBT-1556B

CABLE CARRY BAGBAG, C-CUBED, CARRY, CABLE, ACCESSORY TOTE, NYLON POCKET, VINYL WINDOW (CLEAR), SIZE (22"H X 24"W X 5"D)

FOB: Origin

NET AMT

P/N; LBT-1556B

CABLE CARRY BAGBAG, C-CUBED, CARRY, CABLE, ACCESSORY TOTE, NYLON POCKET, VINYL WINDOW (CLEAR), SIZE (22"H X 24"W X 5"D)

FOB: Origin

NET AMT

P/N; LBT-2559A

BAG, BAE, CARRY, CABLEBAG, BAE, CARRY, CABLE, ACCESS, TOTE, NYLON POCKET, CLEAR VINYL (8 1/2"L X 11"H) WINDOW, SIZE (14"L X 4"W X 14"H) MODIFICATION TO LBT-1556B

FOB: Origin

NET AMT

P/N; LBT-2559A

BAG, BAE, CARRY, CABLEBAG, BAE, CARRY, CABLE, ACCESS, TOTE, NYLON POCKET, CLEAR VINYL (8 1/2"L X 11"H) WINDOW, SIZE (14"L X 4"W X 14"H) MODIFICATION TO LBT-1556B

FOB: Origin

NET AMT

SHIPPING

ESTIMATED SHIPPING ST INIGOES, MD 20684-4013

FOB: Origin

NET AMT

Section C - Descriptions and Specifications

RIS ACCESORY BAGS

RADIO INTEGRATION SYSTEM (RIS) Subsystem accesory bags Specifications / Statement of work

Description

The Naval Air Warfare Center Aircraft Division (NAWCAD), Special Communication Requirements (SCR) Division, Webster Field Annex, has been tasked to procure subsystem accessory bags in support of the RIS Program. Technical Point of Contact is Dave Borman at (301) 995 – 8411 (david.borman@navy.mil).

1. CASTER KIT SPECIFICATION

The (XX) required subsystem accessory bags shall meet the following specifications:

1. 4.2.1 Material: Bags shall be made of ballistics nylon fabric with handles on each side of the bag centered. Handles should be made of 2” wide webbed nylon and folded in center and sewn together. All webbed nylon ends should be terminated in a manner in to prevent fraying. Hardware should be a full heavy duty zipper that spans the full length of the top of the bag. A clear nylon pouch shall be sewn to the front of the bag with a Velcro or equivalent hook and loop closure lid at the top of the pouch sealing it from the elements. Bag should have a ballistics nylon fabric partition in the middle of the inside of the bag, dividing the bag in half. Bottom of partition need not be sewn or attached to the bottom of the bag. Bag should have a reinforced bottom with durable 1/16” thick flexible nylon. The rear exterior of the bag should have pouch sewn on with a Velcro or equivalent hook and loop closure sealing it from the elements. On both ends of the top of the bag, there should be provisions for a shoulder strap with two D-rings sewn on with 1” nylon webbed straps.

a. Closed Exterior Maximum size: Length – 23.25” Height – 23.25” Width – 5. 50”.

b. Interior Maximum size: Length – 23.125” Height – 23.125” Width – 5.375”.

c. Rear Exterior Pouch size: Length – 20.25” Height – 19.00”.

d. Front Clear Window Pouch size: Length – 9.25” Height – 12.50”.

2. 4.2.4 Color: The bag color shall be Flat Tactical Black FS37030, IAW SOW 4.2.4(a).

3. 4.2.5 Hardware: All Bag hardware shall be black

a. 4.2.5-1(b) Hardware shall be stainless steel.

b. 4.2.5-2 Hardware is shall be Black Oxide finished or Powder Coated black .

c. 4.2.5-3 Bag shall have handles for lifting and carrying.

4. Pre-Production Meeting (CDRL A002): Pre-Production meeting via telephone to discuss any questions the supplier may have about the design or above requirements. Persons involved should be the awarded supplier, SCR and a Contract Specialist. This pre-production meeting should be scheduled within 5 business days of the award. Once the CDRL A003 has been delivered, SCR will determine within 2 business days if a second pre-production meeting needs to occur based on their review of the supplier's drawing.

5. Supplier Drawing of Final Product: Supplier shall deliver an assembly level drawing in .DWG (AUTOCAD) format of the anticipated final product, to be delivered within 3 business days of the pre-production meeting; CDRL A003.

DC-80 ANTENNA KIT BAGS

RADIO INTEGRATION SYSTEM (RIS) DC-80 antenna kit bags Specifications / Statement of work

Description

The Naval Air Warfare Center Aircraft Division (NAWCAD), Special Communication Requirements (SCR) Division, Webster Field Annex, has been tasked to procure DC-80 antenna kit bags in support of the RIS Program. Technical Point of Contact is Dave Borman at (301) 995 – 8411 (david.borman@navy.mil).

2. CASTER KIT SPECIFICATION

The (XX) required DC-80 antenna kit bags shall meet the following specifications:

6. 4.2.1 Material: Bags shall be made of ballistics nylon fabric with handles on each side of the bag centered. Hardware should be a full heavy duty zipper that spans the full length of the top of the bag. Padding should be 1/8” foam placed in-between the inner and outer layers of the bag. Bag should have provisions to separate antenna head, antenna elements, and antenna poles within in the bag. Antenna head should have a pocket with draw-string closure whereas the antenna elements and poles should have a total quantity of 3 individual pockets with Velcro or equivalent fabric hook and loop tab closure on both ends. The bag should have a layer of 1/16” thick durable nylon on the bottom of the bag sewn in between the inner and outer layers. A clear nylon pouch will be sewn into the inside of the bag, the pouch should be attached by the top and have an opening on one side and be centered with-in the bag. All webbed nylon ends should be terminated in a manner in to prevent fraying.

a. Closed Exterior Maximum size: Length – 50.00” Height – 4.00” Width – 5.75”.

b. Interior Maximum size: Length – Length – 49.75” Height – 3.75” Width – 5.50”.

c. Antenna Head Pocket size: Diameter – 5.00” Height – 4.50”.

d. Antenna Element Pocket #1 size: Length – 45.00” Height – 1.75” Width – 1.75”.

e. Antenna Element Pocket #2 size: Length –17.50” Height – 1.75” Width – 1.75”.

f. Antenna Pole Pocket size: Length – 40.00” Height – 1.75” Width – 1.75”.

g. Interior Clear Nylon pouch size: Length – 5.75” Height – 3.00”.

7. 4.2.4 Color: The bag color shall be Flat Tactical Black FS37030, IAW SOW 4.2.4(a).

8. 4.2.5 Hardware: All Bag hardware shall be black

a. 4.2.5-1(b) Hardware shall be stainless steel.

b. 4.2.5-2 Hardware is shall be Black Oxide finished or Powder Coated black .

c. 4.2.5-3 Bag shall have handles for lifting and carrying.

9. Pre-Production Meeting (CDRL A002): Pre-Production meeting via telephone to discuss any questions the supplier may have about the design or above requirements. Persons involved should be the awarded supplier, SCR and a Contract Specialist. This pre-production meeting should be scheduled within 5 business days of the award. Once the CDRL A003 has been delivered, SCR will determine within 2 business days if a second pre-production meeting needs to occur based on their review of the supplier's drawing.

10. Supplier Drawing of Final Product: Supplier shall deliver an assembly level drawing in .DWG (AUTOCAD) format of the anticipated final product, to be delivered within 3 business days of the pre-production meeting; CDRL A003.

DC-190 ANTENNA KIT BAGS

RADIO INTEGRATION SYSTEM (RIS) dc-190 antenna kit bags Specifications / Statement of work

Description

The Naval Air Warfare Center Aircraft Division (NAWCAD), Special Communication Requirements (SCR) Division, Webster Field Annex, has been tasked to procure DC-190 antenna kit bags in support of the RIS Program. Technical Point of Contact is Dave Borman at (301) 995 – 8411 (david.borman@navy.mil).

3. CASTER KIT SPECIFICATION

The (XX) required DC-190 antenna kit bags shall meet the following specifications:

11. 4.2.1 Material: Bags shall be made of ballistics nylon fabric with handles on each side of the bag centered, as well as a shoulder strap. Hardware should be a full heavy duty zipper that spans the full length of the top and both sides of the bag so that it zips in half. Front of bag should have a clear nylon pocket. A separate bag for the antenna pole should be sewn to the bottom of the antenna head bag on center and should have covered ends secured with adjustable nylon webbing straps with plastic side release buckles. Padding for the antenna head bag should be 3/16-1/4” foam placed in-between the inner and outer layers of the bag, pole bag need not be padded. The antenna head bag should have two adjustable nylon webbing straps with plastic side release buckles to secure the antenna head to the inside of the bag. An interior padded pocket with zippered closure should be on the lower portion of the opposite facing side of the antenna head that will accommodate the antenna elements. All webbed nylon ends should be terminated in a manner in to prevent fraying.

Antenna head bag:

a. Closed Exterior Maximum size: Length – 22.25” Height – 17.00” Width – 4.00”.

b. Interior Maximum size: Length – 22.25” Height – 17.00” Width – 4.00”.

c. Front Window Pocket size: Length – 9.75” Height – 11.50”.

d. Antenna Head Strap Spacing (not length of straps): Height – 13.75” Width 9.50”

e. Antenna Element Pouch size: Length – 22.00” Height – 4.00” Width – 2.50”

Antenna pole bag:

f. Closed Exterior Maximum size: Length – 38.50” Diameter – 3.00”.

12. 4.2.4 Color: The bag color shall be Flat Tactical Black FS37030, IAW SOW 4.2.4(a).

13. 4.2.5 Hardware: All bag hardware shall be black

a. 4.2.5-1(b) Hardware shall be stainless steel.

b. 4.2.5-2 Hardware is shall be Black Oxide finished or Powder Coated black .

c. 4.2.5-3 Bag shall have handles and a shoulder strap for lifting and carrying.

14. Pre-Production Meeting (CDRL A002): Pre-Production meeting via telephone to discuss any questions the supplier may have about the design or above requirements. Persons involved should be the awarded supplier, SCR and a Contract Specialist. This pre-production meeting should be scheduled within 5 business days of the award. Once the CDRL A003 has been delivered, SCR will determine within 2 business days if a second pre-production meeting needs to occur based on their review of the supplier's drawing.

15. Supplier Drawing of Final Product: Supplier shall deliver an assembly level drawing in .DWG (AUTOCAD) format of the anticipated final product, to be delivered within 3 business days of the pre-production meeting; CDRL A003.

GROUNDING ROD KIT BAGS

RADIO INTEGRATION SYSTEM (RIS) Grounding rod kit bags Specifications / Statement of work

Description

The Naval Air Warfare Center Aircraft Division (NAWCAD), Special Communication Requirements (SCR) Division, Webster Field Annex, has been tasked to procure grounding rod kit bags in support of the RIS Program. Technical Point of Contact is Dave Borman at (301) 995 – 8411 (david.borman@navy.mil).

4. CASTER KIT SPECIFICATION

The (XX) required grounding rod kit bags shall meet the following specifications:

16. 4.2.1 Material: Bags shall be round and made of ballistics nylon with webbed nylon handles on each side of the bag centered. All exposed webbed nylon ends should be terminated in a manner in which to prevent fraying. Hardware should be a full heavy duty zipper that spans the full length of the top of the bag. Padding should be 1/8” foam placed in-between the inner and outer layers of the bag.

a. Closed Exterior Maximum size: Length – 41.25” Diameter – 4.00”.

b. Interior Maximum size: Length – 41.00” Diameter – 3.75”.

17. 4.2.4 Color: The bag color shall be Flat Tactical Black FS37030, IAW SOW 4.2.4(a).

18. 4.2.5 Hardware: All case hardware shall be black

a. 4.2.5-1(b) Hardware shall be stainless steel.

b. 4.2.5-2 Hardware is shall be Black Oxide finished or Powder Coated black .

c. 4.2.5-3 Case shall have handles for lifting and carrying.

19. Pre-Production Meeting (CDRL A002): Pre-Production meeting via telephone to discuss any questions the supplier may have about the design or above requirements. Persons involved should be the awarded supplier, SCR and a Contract Specialist. This pre-production meeting should be scheduled within 5 business days of the award. Once the CDRL A003 has been delivered, SCR will determine within 2 business days if a second pre-production meeting needs to occur based on their review of the supplier's drawing.

20. Supplier Drawing of Final Product: Supplier shall deliver an assembly level drawing in .DWG (AUTOCAD) format of the anticipated final product, to be delivered within 3 business days of the pre-production meeting; CDRL A003.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

FOB: Origin

CLAUSES INCORPORATED BY REFERENCE

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

252.232-7003

ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (MAR 2008)

(a) Definitions. As used in this clause--

(1) Contract financing payment and invoice payment have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) Electronic form means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) Payment request means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when--

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer's determination with each request for payment; or

(4) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payments requests.

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2012)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) 52.204-11, American Recovery and Reinvestment Act—Reporting Requirements (Jul 2010) (Pub. L. 111-5).

___ (6) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note).

____ (7) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (JAN 2012) (41 U.S.C. 2313).

____ (8) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

____ (9) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (10) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (11) [Reserved]

X (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (13)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (14) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)).

____ (15)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Oct 2001) of 52.219-9.

____ (iii) Alternate II (Oct 2001) of 52.219-9.

____ (iv) Alternate III (Jul 2010) of 52.219-9.

____ (16) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (17) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

____ (18) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (19)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

____ (ii) Alternate I (June 2003) of 52.219-23.

____ (20) 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

____ (21) 52.219-26, Small Disadvantaged Business Participation Program— Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

____ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)).

____ (24) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business Concerns (NOV 2011).

____ (25) 52.219-30, Notice of Set-Aside for Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (NOV 2011

X (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X (27) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126).

X (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

X (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

____ (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212).

X (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).

____ (32) 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212).

____ (33) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

____ (34) 52.222-54, Employment Eligibility Verification (Jan 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (37)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423).

____ (ii) Alternate I (Dec 2007) of 52.223-16.

X (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

X (39) 52.225-1, Buy American Act—Supplies (Feb 2009) (41 U.S.C. 10a-10d).

____ (40)(i) 52.225-3, Buy American Act—Free Trade Agreements—Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138).

____ (ii) Alternate I (Jan 2004) of 52.225-3.

____ (iii) Alternate II (Jan 2004) of 52.225-3.

____ (41) 52.225-5, Trade Agreements (NOV 2011) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (43) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (44) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (45) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

____ (46) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

X (47) 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration (Oct 2003) (31 U.S.C. 3332).

____ (48) 52.232-34, Payment by Electronic Funds Transfer—Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332).

____ (49) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332).

____ (50) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (51)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

_____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

_____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act—Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

_____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act—Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (Nov 2007) (41 351, et seq.).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services—Requirements (Feb 2009) (41 U.S.C. 351, et seq.).

_____ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).

_____ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note).

(ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) Reserved.

(iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793).

(vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (JAN 2009).

(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-2

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/far/ or http://farsite.hill.af.mil.

252.204-7000

DISCLOSURE OF INFORMATION (DEC 1991)

(a) The Contractor shall not release to anyone outside the Contractor's organization any unclassified information, regardless of medium (e.g., film, tape, document), pertaining to any part of this contract or any program related to this contract, unless--

(1) The Contracting Officer has given prior written approval; or

(2) The information is otherwise in the public domain before the date of release.

(b) Requests for approval shall identify the specific information to be released, the medium to be used, and the purpose for the release. The Contractor shall submit its request to the Contracting Officer at least 45 days before the proposed date for release.

(c) The Contractor agrees to include a similar requirement in each subcontract under this contract. Subcontractors shall submit requests for authorization to release through the prime contractor to the Contracting Officer.

252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (DEC2011)

(a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components.

____ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207).

(b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components.

(1) ____ 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) (Section 847 of Pub. L. 110-181).

(2) ____ 252.203-7003, Agency Office of the Inspector General (SEP 2010)(section 6101 of Pub. L. 110-252, 41 U.S.C. 3509).

(3) ____ 252.205-7000, Provision of Information to Cooperative Agreement Holders (DEC 1991) (10 U.S.C. 2416).

(4) ____ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) (SEP 2011) (15 U.S.C. 637).

(5) ____ 252.219-7004, Small Business Subcontracting Plan (Test Program) (JAN 2011) (15 U.S.C. 637 note).

(6)(i) X 252.225-7001, Buy American Act and Balance of Payments Program (OCT 2011) (41 U.S.C. chapter 83, E.O. 10582).

(ii) ____ Alternate I (OCT 2011) of 252.225-7001.

(7) ____ 252.225-7008, Restriction on Acquisition of Specialty Metals (JUL 2009) (10 U.S.C. 2533b).

(8) ____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JAN 2011) (10 U.S.C. 2533b).

(9) ____ 252.225-7012, Preference for Certain Domestic Commodities (JUN 2010) (10 U.S.C. 2533a).

(10) ____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools (JUN 2005) (10 U.S.C. 2533a).

(11) ____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (JUN 2011) (Section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts).

(12) ____ 252.225-7017, Photovoltaic Devices (DEC 2011) (Section 846 of Pub. L. 111-383).

(13)(i) ____ 252.225-7021, Trade Agreements (OCT 2011) (19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note).

(ii) ____ Alternate I (OCT 2011) of 252.225-7021.

(iii) ____ Alternate II (OCT 2011) of 252.225-7021.

(14) ____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales (APR 2003) (22 U.S.C. 2779).

(15) ____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments (APR 2003) (22 U.S.C. 2755).

(16)(i) ____ 252.225-7036, Buy American Act—Free Trade Agreements—Balance of Payments Program (OCT 2011) (41 U.S.C. chapter 83 and 19 U.S.C. 3301 note).

(ii) ____ Alternate I (OCT 2011) of 252.225-7036.

(iii) ____ Alternate II (OCT 2011) of 252.225-7036.

(iv) ____ Alternate III (OCT 2011) of 252.225-7036.

(17) ____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (JUN 2005) (10 U.S.C. 2534(a)(3)).

(18) ____ 252.225-7039, Contractors Performing Private Security Functions (AUG 2011) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383).

(19) ____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (SEP 2004) (Section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts).

(20) ____ 252.227-7013, Rights in Technical Data--Noncommercial Items (SEP 2011), if applicable (see 227.7103-6(a)).

(21) ____ 252.227-7015, Technical Data—Commercial Items (DEC 2011) (10 U.S.C. 2320).

(22) ____ 252.227-7037, Validation of Restrictive Markings on Technical Data ((SEP 2011), if applicable (see 227.7102-4(c)))(10 U.S.C. 2321).

(23) X 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227).

(24) ____ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84)

(25) ____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375).

(26) ____ 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410).

(27) ____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment For Military Operations (OCT 2010) (Section 807 of Pub. L. 111-84).

(28) ____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417).

(29)(i) ____ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(ii) ____ Alternate I (MAR 2000) of 252.247-7023.

(iii) ____ Alternate II (MAR 2000) of 252.247-7023.

(iv) ____ Alternate III (MAY 2002) of 252.247-7023.

(30) ____ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR (2000) (10 U.S.C. 2631).

(31) ____ 252.247-7027, Riding Gang Member Requirements (OCT 2011) (Section 3504 of Pub. L. 110-417).

c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract:

(1) 252.225-7039, Contractors Performing Private Security Functions (AUG 2011) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383).

2) 252.227-7013, Rights in Technical Data--Noncommercial Items (SEP 2011), if applicable (see 227.7103-6(a)).

(3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)).

(4) 252.227-7037, Validation of Restrictive Markings on Technical Data (SEP 2011), if applicable (see 227.7102-4(c)).

(5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84).

(6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375).

(7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417).

(8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631).

(End of clause)

5252.211- 9510

CONTRACTOR EMPLOYEES (NAVAIR)(MAY 2011)

(a) In all situations where contractor personnel status is not obvious, all contractor personnel are required to identify themselves to avoid creating an impression to the public, agency officials, or Congress that such contractor personnel are Government officials. This can occur during meeting attendance, through written (letter or email) correspondence or verbal discussions (in person or telephonic), when making presentations, or in other situations where their contractor status is not obvious to third parties. This list is not exhaustive. Therefore, the contractor employee(s) shall:

(1) Not by word or deed give the impression or appearance of being a Government employee;

(2) Wear appropriate badges visible above the waist that identify them as contractor employees when in Government spaces, at a Government-sponsored event, or an event outside normal work spaces in support of the contract/order;

(3) Clearly identify themselves as contractor employees in telephone conversations and in all formal and informal written and electronic correspondence. Identification shall include the name of the company for whom they work;

(4) Identify themselves by name, their company name, if they are a subcontractor the name of the prime contractor their company is supporting, as well as the Government office they are supporting when participating in meetings, conferences, and other interactions in which all parties are not in daily contact with the individual contractor employee; and

(5) Be able to provide, when asked, the full number of the contract/order under which they are performing, and the name of the Contracting Officer’s Representative.

(b) If wearing a badge is a risk to safety and/or security, then an alternative means of identification maybe utilized if endorsed by the Contracting Officer’s Representative and approved by the Contracting Officer.

(c) The Contracting Officer will make final determination of compliance with regulations with regard to proper identification of contractor employees.

Section K - Representations, Certifications and Other Statements of Offerors

CLAUSES INCORPORATED BY FULL TEXT

52.219-1

SMALL BUSINESS PROGRAM REPRESENTATIONS (APR 2011)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is [334911].

(2) The small business size standard is [500 Employees].

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b) Representations. (1) The offeror represents as part of its offer that it [ ] is, [ ] is not a small business concern.

(2) [Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision.] The offeror represents, for general statistical purposes, that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(3) [Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision.] The offeror represents as part of its offer that it [ ] is, [ ] is not a women-owned small business concern.

(4) Women-owned small business (WOSB) concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (b)(3) of this provision.] The offeror represents as part of its offer that--

(i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (b)(4)(i) of this provision is accurate in reference to the WOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern or concerns that are participating in the joint venture: ________________.] Each WOSB concern participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(5) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a women-owned small business concern eligible under the WOSB Program in (b)(4) of this provision.] The offeror represents as part of its offer that--

(i) It [ ] is, [ ] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (b)(5)(i) of this provision is accurate in reference to the EDWOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern or concerns that are participating in the joint venture: _________________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(6) Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision. The offeror represents as part of its offer that it [ ] is, [ ] is not a veteran-owned small business concern.

(7) Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (b)(4) of this provision. The offeror represents as part of its offer that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern.

(8) [Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (b)(6)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________________________________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(c) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business concern eligible under the WOSB Program.

“Service-disabled veteran-owned small business concern”--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern”, as used in this provision, means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in…