2.1.1 27Q0006 RFQ.pdf
PDF 2 MB Posted
- Attached to
- ASSESSMENT OF SIDEPORT DOOR ASSEMBLIES
- Solicitation number
- N0040627Q0006
About this file
This is a Request for Quote (RFQ) solicitation issued by the Naval Supply Fleet Logistics Center Puget Sound for an assessment of Port and Starboard Sideport Door assemblies on Navy vessels.
The solicitation (N0040627Q0006) was issued on November 16, 2026, with an offer due date of November 20, 2026, at 2:00 PM local time. The Government anticipates awarding a firm, fixed-price contract under FAR Part 12 for commercial products and services. The scope of work requires contractors to accomplish an assessment of port and starboard sideport shell door assemblies on vessels to identify operational degradations, using specified technical references for guidance. Contractors must submit one legible copy of a condition report listing assessment results to the supervisor. The delivery location is Sasebo, Japan (USN SRF-JRMC), with a delivery date on or before December 21, 2026. The contract is for one job. Evaluation will be based on technical factors (including delivery date), price, and past performance with no stated order of relative importance. Quoters must have access to references in the Statement of Work and must submit certifications or capability statements demonstrating their ability to perform work on the specified doors. All quoters must note any exceptions to the solicitation's terms, conditions, and specifications; quotes without exceptions will be assumed to take no exception from all provisions. The Government reserves the right to make a single award to the quoter whose offer is considered in the best interest of the Government. Invoices must be submitted via the Wide Area WorkFlow (WAWF) system. The NAICS code is 336611, and quoters must be registered in the System for Award Management (SAM) to receive a Government award.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WOMEN-OWNED SMALL
BUSINESS (WOSB)
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES
1. REQUISITION NUMBER PAGE 1 OF
2. CONTRACT NUMBER 3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE
DATE
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME b. TELEPHONE NUMBER (No collect calls)
8. OFFER DUE DATE/
LOCAL TIME
9. ISSUED BY
13b. RATING
14. METHOD OF SOLICITATION
CODE
15. DELIVER TO 16. ADMINISTERED BY CODE
18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/
OFFEROR
CODE
FACILITY
CODE
CODE
TELEPHONE NUMBER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN
OFFER
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK
BELOW IS CHECKED
REQUEST
FOR QUOTE
(RFQ)
INVITATION
FOR BID
(IFB)
REQUEST
FOR
PROPOSAL
(RFP)
SEE ADDENDUM
19.
ITEM NUMBER
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH
AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND
ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS
SPECIFIED
29. AWARD OF CONTRACT: REFERENCE OFFER
DATED . . YOUR OFFER ON SOLICITATION
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR
30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED
31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 11/2021)
Prescribed by GSA - FAR (48 CFR) 53.212
10. THIS ACQUISITION IS UNRESTRICTED OR
NORTH AMERICAN
INDUSTRY CLASSIFICATION
STANDARD (NAICS):
SIZE STANDARD:
13a. THIS CONTRACT IS A
RATED ORDER UNDER
THE DEFENSE PRIORITIES
AND ALLOCATIONS
SYSTEM - DPAS (15 CFR 700)
SET ASIDE: % FOR:
11. DELIVERY FOR FREE ON
BOARD (FOB) DESTINATION
UNLESS BLOCK IS MARKED
SEE SCHEDULE
12. DISCOUNT TERMS
ARE ARE NOT ATTACHED
ARE ARE NOT ATTACHED
27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3
AND 52.212-5 ARE ATTACHED. ADDENDA
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
8(A)
ECONOMICALLY
DISADVANTAGED
WOMEN-OWNED SMALL
BUSINESS (EDWOSB)
SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
(SDVOSB)
HUBZONE SMALL
BUSINESS
SMALL BUSINESS
NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.
Section A - Solicitation/Contract Form
Assess PORT and STBD Sideport Door
Additional Regulation or Supplemental Clauses Incorporated by Full Text
FLCPS SRF 001 FLCPS_SRF_NOTICE_TO_OFFERORS (Aug 2025)
This Solicitation is for ASSESSMENT of
PORT AND STARBOARD SIDEPORT DOOR ASSEMBLY
1. NOTICE TO ALL OFFERORS: The Government anticipates awarding a firm, fixed price contract in accordance with RFO Part 12 in response to quotes received in response to this solicitation. A firm, fixed price contract places the maximum risk and full responsibility for all costs and resulting profit or loss on the contractor, offerors are advised to consider these risks when pricing their quotes.
2. See block 8 on page 1 of the solicitation for the closing date and time.
3. The deadline for submission of questions regarding the solicitation's terms, conditions, specifications, and/or the statement of work (SOW) is 2 days prior to the solicitation's closing date. Submit via email, to the Contracting Official prior to solicitation closing date: 2 days
Name: Jennifer Martinez Email: jennifer.a.martinez42.civ@us.navy.mil
4. In accordance with RFO 12.203, the Government will select the most advantageous offer based on the following evaluation factors: technical including delivery date, price, and past performance in no order of relative importance. Quoters must have access to references in section 2 of State of Work. Quoters must submit certifications/capability statements to perform work on doors identified in Section 1 of Statement of Work.
5. : All quoters MUST note all exceptions from the solicitation's terms, conditions, specifications, and/or the statement of work, if EXCEPTIONS any. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within the solicitation."
6. SINGLE AWARD FOR ALL ITEMS: Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the quoter whose quote is considered in the best interest of the government, price and other factors considered. Therefore, quoters who quote less than the entire effort specified herein may be determined to be unacceptable.
7. Submission of invoices will be via WAWF; see Clause 252.232-7006.
PLEASE PROVIDE:
YOUR NAME:
YOUR SAM REGISTERED CAGE CODE NUMBER:
YOUR E-MAIL ADDRESS:
YOUR PHONE NUMBER:
LIST YOUR COMPANY SIZE: LARGE OR SMALL
YOUR COMPANY MUST BE REGISTERED WITH **SAM** SYSTEM AWARD FOR MANAGEMENT IN ORDER TO RECEIVE A
GOVERNMENT AWARD
THIS IS ALWAYS A FREE SITE TO REGISTER; SEE FOLLOWING LINK: HTTPS://WWW.SAM.GOV
Information for Contractor Employees Seeking to Enter Japan
1. The following is provided for the information of contractors to the U.S. Navy whose employees need to enter Japan to perform contract requirements. The information is current as of February 2023. While the information is believed to be accurate, policies and procedures are continuing to change on a regular basis.
2. See https://www.japan.travel/en/coronavirus/ for a list of the current restrictions and COVID entry procedures.
3. All contractor personnel arriving in Japan should utilize the process outlined in the USFJ Instruction to ensure they are recognized as members of the civilian component under Article 1.b. of the SOFA. The process requires that a contractor contact the contracting officer for the contract on which its employee will perform in Japan prior to the employee traveling to Japan. Contact is made through the Synchronized Pre-deployment and Operational Tracker (SPOT) system. The contractor will provide information to the contracting officer about the traveling employee. Following
N0040627Q0006 review, the contracting officer will issue the contractor a Letter of Authorization (LOA). The incoming contractor employee will hand carry a copy of the LOA and show it to the Japanese immigration authority at the port of entry as evidence of SOFA status. Contractors who do not have current access to SPOT should contact their contracting officer for information about accessing SPOT.
4. This memo is intended to provide current information for contractors whose employees need to enter Japan to perform contract requirements.
Nothing in the memo should be understood to change the terms or conditions of an existing contract. Any such changes must be made by an authorized contracting officer per 52.212-4.
The following attachments will be provided upon request:
1. USFJI 64-100, Contract Performance in Japan (25 Oct 2019)
Requirements for contractors to receive CFAY base access:
Documents that are required for contractors that don't have a CAC:
1. Visit request letter *1
2. Installation Access Request Form *2, 5
3. SPOT Letter of Authorization (LOA) *3
4. SECNAV 5512-1 *4
5. Color copy of passport
Notes:
1. Visit request letter should be on company letterhead
2. Dates on the installation access form must match the respective contractors LOA
3. LOA must be signed by contracting officer
4. SECNAV 5512-1 must have SSN listed, and initials/signature must be hand written. Block 24: POC will be provided at time of award.
Documents that are required for contractors that have a CAC:
1. Visit request letter *1
2. SPOT Letter of Authorization (LOA) *2
Notes: Visit request letter should be on company letterhead
All forms must be electronically filled out (except SECNAV Form page-2, blocks 28-29 for Initials and block-30 for Wet Signature and date).
- Ensure visit dates (DBIDS and Visit Request Letter) are the same
- Home address on DBIDS and SECNAV Forms must be the same
- DBIDS form, ID TYPE: Passport and provide passport number
- SECNAV Form, block-13, ensure FULL SSN, state ID/Drivers License and Passport Number and information are provided on block-14-18
- Forms not filled out correctly will be returned
NOTES:
1. These documents must be sent through DOD SAFE or ENCRYPTED email (due to PII) 14 days prior to scheduled visit.
2. Contractors will not enter Japan without a SPOT LOA, which shall present copy of SPOT LOA to the Japanese immigration official upon entry into Japan and keep a copy of the LOA in their possession while present in Japan. A copy does not need to be kept on the employee's person but should be in the employee's possession so they may produce the copy within a reasonable time as required for administrative processing and renewal purposes as per USFJINST 64-100.
Section B - Supplies or Services & Prices or Costs
Additional Information/Notes
Item Supplies/Service Quantity Unit Unit Price Amount
0001 See Job Specifications in Statement of Work.
Pricing Arrangement: Firm Fixed Price
1 Job
Section C - Description/Specifications/Statement of Work
1. SCOPE:
1.1 Title: PORT and STBD Sideport Door; assess
1.2 Location of Work:
1.2.1 Side Port (4-95-2-L)
1.2.2 Side Port (4-123-1-L)
1.3 Identification:
1.3.1 Quantity (One AY), Port Sideport Forward (FWD) and After (AFT) Shell Door Assembly (ASSY) located in 1.2.1, MFR: Jered LLC, MFR ID: 15861000-1, Part Number: 15861000-1, Figure 7-2 of 2.2, APL: 31A040084 (FWD Door: 31A030419/AFT Door: 31A030417)
1.3.2 Quantity (One AY), Starboard (STBD) Sideport FWD and AFT Shell Door ASSY located in 1.2.2, MFR: Jered LLC, MFR ID: 15861000-1, Part Number: 15861000-1, Figure 7-2 of 2.2, APL: 31A040085 (FWD Door: 31A030420/AFT Door: 31A030418)
2 . REFERENCES:
2.1 S9589-AP-MMC-010 Rev 3, Self-Deploying Sideport Ramp, Portable Sideport Ramp, and Shell Doors
2.2 624-7317962 Rev E, Sideport Doors Installation and Details (LPD-17 THRU 27 Only)
3 . REQUIREMENTS:
3.1 Accomplish an assessment of port sideport shell door ASSY and STBD sideport shell door ASSY listed in 1.3.1 and 1.3.2 to identify operational degradations, using 2.1 and 2.2 for guidance.
(V) "REPORT"
3.1.1 Submit one legible copy of condition report listing results of 3.1 to the SUPERVISOR.
4. NOTES:
4.1 Initial Condition - During normal operations, S/F discovered numerous degradations to the operation of both the port and STBD sideport doors.
4.2 SRF Tool Room will issue each torque wrench, pressure gauge and dial indicator when required.
5. GOVERNMENT FURNISHED MATERIAL (GFM)
5 .1 None.
Requirements Assess PORT and STBD Sideport Door
Section D - Packaging and Marking
Section E - Inspection and Acceptance
Overall Contract Inspection/Acceptance Locations
Inspection and Acceptance Location
Both Destination Instructions: NOTIFY POC UPON ARRIVAL
DoDAAC: N45598 CountryCode: USA
SRF-JRMC DET SASEBO JAPAN
SRF-JRMC DET SASEBO JAPAN, PSC 476 BOX 16
FPO, AP 96322-1400
UNITED STATES
GOVERNMENT REPRESENTATIVE, GOVERNMENT PROJECT TEAM
Telephone: N45598
Section F - Deliveries or Performance
Overall Contract Delivery Period
Contractor Destination
Line Item Delivery Schedule Quantity Address and POC
Delivery On Or Before Delivery Date 21 Dec 2026
1 Job Place of Performance DoDAAC: N45598 CountryCode: JPN
USN SRF-JRMC SASEBO JAPAN
USN SRF-JRMC SASEBO JAPAN, PHONE 011-81-956-50-3232
TATGAMI CHO SASEBO 857-0063
JAPAN
GOVERNMENT REPRESENTATIVE, GOVERNMENT PROJECT TEAM
Telephone: N45598
Section G - Contract Administration Data
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Tailored) (Jan 2023)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.
WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
COMBO
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.232-90 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.
when creating payment requests and receiving reports in the system.
Routing Data Table *PROVIDED AT AWARD*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC ____
Issue By DoDAAC ____
Admin DoDAAC ____
Inspect By DoDAAC ____
Ship To Code ____
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) ____
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
**PROVIDED AT AWARD**
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Section H - Special Contract Requirements
Section I - Contract Clauses
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026
52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)
Feb 2026
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)
Feb 2026
52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)
Feb 2026
52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.232-90 Fast Payment Procedure. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026
52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)
Apr 2026
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
Jan 2023
252.205-7000 Provision of Information to Cooperative Agreement Holders. Oct 2024 252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
Jun 2023
252.225-7962 Vendor Threat Mitigation Support to Operations. (DEVIATION 2026-O0051) Jun 2026 Deviation 2026-O0051 Jun 2026
252.225-7975 Additional Access to Contractor and Subcontractor Records. (DEVIATION 2026-O0051)
Jun 2026 Deviation 2026-O0051 Jun 2026
252.225-7976 Contractor Personnel Performing in Japan (DEVIATION 2018-O0019) Aug 2018 Deviation 2018-O0019 Aug 2018 252.232-7010 Levies on Contract Payments. Dec 2006
252.240-7007 Prohibitions Relating to Chinese Military Companies. (DEVIATION 2026- O0025)
Sep 2026 Deviation 2026-O0025 Sep 2026
252.240-7995 Prohibition on Contract Awards with Entities That Contract with Lobbyists for Chinese Military Companies--Representation. (DEVIATION 2026-O0025)
Sep 2026 Deviation 2026-O0025 Sep 2026
252.240-7996 Prohibition on Contract Awards to Chinese Military Companies-- Representation. (DEVIATION 2026-O0025)
Sep 2026 Deviation 2026-O0025 Sep 2026
252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)
Feb 2026 Deviation 2026-O0025 Feb 2026
252.244-7999 Subcontracts for Commercial Products or Commercial Services.
(DEVIATION 2026-O0015)
Feb 2026 Deviation 2026-O0015 Jan 2026
252.247-7023 Transportation of Supplies by Sea. Oct 2024
DFARS Clauses Incorporated by Full Text
252.211-7003 Item Unique Identification and Valuation. (Jan 2023)
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)
(a) . As used in this clause- Definitions
"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.
"Concatenated unique item identifier" means-
(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or
(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.
"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.
"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.
"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html
"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.
" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.
" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.
"Government's unit acquisition cost" means-
(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;
(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and
(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.
"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.
"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.
"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.
" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.
"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.
"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.
"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.
"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.
"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.
"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.
"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.
"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.
"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.
"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html
(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.
(c) Unique item identifier.
(1) The Contractor shall provide a unique item identifier for the following:
(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:
Contract Line, Subline, or
Exhibit Line Item Number Item Description
(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:
Contract Line, Subline, or
Exhibit Line Item Number Item Description
(If items are identified in the Schedule, insert "See Schedule in this table.)
(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____
(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____
(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.
(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.
(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.
(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.
(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:
(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH
10.8.2 Data Identifier and Application Identifier Standard.
(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH
10.8.2 Data Identifier and Application Identifier Standard.
(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and
(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.
(5) . Unique item identifier
(i) The Contractor shall-
(A) Determine whether to-
Serialize within the enterprise identifier; (1)
Serialize within the part, lot, or batch number; or (2)
Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)
(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;
(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and
(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.
(ii) The issuing agency code-
(A) Shall not be placed on the item; and
(B) Shall be derived from the data qualifier for the enterprise identifier.
(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:
(1) Unique item identifier.
(2) Unique item identifier type.
(3) Issuing agency code (if concatenated unique item identifier is used).
(4) Enterprise identifier (if concatenated unique item identifier is used).
(5) Original part number (if there is serialization within the original part number).
(6) Lot or batch number (if there is serialization within the lot or batch number).
(7) Current part number (optional and only if not the same as the original part number).
(8) Current part number effective date (optional and only if current part number is used).
(9) Serial number (if concatenated unique item identifier is used).
(10) Government's unit acquisition cost.
(11) Unit of measure.
(12) Type designation of the item as specified in the contract schedule, if any.
(13) Whether the item is an item of Special Tooling or Special Test Equipment.
(14) Whether the item is covered by a warranty.
(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:
(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.
(2) Unique item identifier of the embedded subassembly, component, or part.
(3) Unique item identifier type.**
(4) Issuing agency code (if concatenated unique item identifier is used).**
(5) Enterprise identifier (if concatenated unique item identifier is used).**
(6) Original part number (if there is serialization within the original part number).**
(7) Lot or batch number (if there is serialization within the lot or batch number).**
(8) Current part number (optional and only if not the same as the original part number).**
(9) Current part number effective date (optional and only if current part number is used).**
(10) Serial number (if concatenated unique item identifier is used).**
(11) Description.
** Once per item.
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.
(2) Embedded items shall be reported by one of the following methods-
(i) Use of the embedded items capability in WAWF;
(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or
(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.
(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.
(End of clause)
Additional Regulation or Supplemental Clauses Incorporated by Full Text
SUPTXT 203.1106-1 NAVY USE OF ABILITY ONE (Jan 2025)
SUPTXT 203.1106-1 (3-18) NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR
INFORMATION
NAVSUP Fleet Logistics Center Puget Sound may utilize contractor support through the AbilityOne Program, as needed, to perform contract closeout functions for this acquisition. Information, including business sensitive/confidential or proprietary data, that the offeror provides to the government or information already in the possession of the government may be viewed and utilized by the AbilityOne Program support contractor personnel during the course of its contract performance. The information that may be made available to the support contractor may include, for example, pricing and technical proposals, historical contract, pricing and performance information, Commercial Asset Visibility (CAV) reporting information and similar data/information.
By submission of a proposal in response to this solicitation, the offeror and its subcontractors consent to a release of their business sensitive /confidential or proprietary data to the government's AbilityOne Program support contractor personnel. AbilityOne will have a Non-Disclosure/Non- Use Agreement in place with the Government in order to comply with DFARS 252.227-7994. The offeror retains the right to engage AbilityOne in a non-disclosure agreement pursuant to DFARS 252.227-7994(b)(5)(iv).
Section J - List of Attachments
Section K - Representations, Certification, & Other Statements
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026- O0038)
Feb 2026
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.
Jun 2023
DFARS Clauses Incorporated by Full Text
252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.
(May 2021)
PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-
REPRESENTATION (MAY 2021)
The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."
(a) . "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or Definitions essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.
(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from Prohibition procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.
(c) . The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at for Procedures https://www.sam.gov entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.
(d) . If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at Representation 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:
The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.
(e) . If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications Disclosures equipment or services," the Offeror shall provide the following information as part of the offer:
(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).
(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.
(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).
(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).
(End of provision)
252.204-7998 Alternate A, Annual Representations and Certifications. (DEVIATION 2026-O0043)
(Feb 2026) Alternate A Deviation 2026-O0043
(Feb 2026) (Feb 2026)
Alternate A, Annual Representations and Certifications (DEVIATION 2026-O0043)(FEB 2026)
Include the following paragraphs (e), (f), and (g) in the provision at FAR 52.204-7:
(e)(1) If the provision at FAR 52.204-7, System for Award Management Registration, is included in this solicitation, paragraph (g) of this -provision applies.
(2) If the provision at FAR 52.204-7, System for Award Management - Registration, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (g) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:
(i) Paragraph (g) applies.
(ii) Paragraph (g) does not apply and the Offeror has completed the individual representations and certifications in the solicitation.
(f)(1) The following representations or certifications in the SAM database are applicable to this solicitation as indicated:
(i) 252.204-7016, Covered Defense Telecommunications Equipment or Services--Representation. Applies to all solicitations.
(ii) 252.216-7008, Economic Price Adjustment--Wage Rates or Material Prices Controlled by a Foreign Government. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.
(iii) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.
(iv) 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services--Representations. Applies to solicitations for the acquisition of commercial satellite services.
(v) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.
(vi) 252.229-7012, Tax Exemptions (Italy)--Representation. Applies to solicitations when contract performance will be in Italy.
(vii) 252.229-7013, Tax Exemptions (Spain)--Representation. Applies to solicitations when contract performance will be in Spain.
(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer: [ ]Contracting Officer check as appropriate.
(i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.
(ii) 252.225-7000, Buy American--Balance of Payments Program Certificate.
(iii) 252.225-7020, Trade Agreements Certificate.
Use with Alternate I.
(iv) 252.225-7031, Secondary Arab Boycott of Israel.
(v) 252.225-7035, Buy American--Free Trade Agreements--Balance of Payments Program Certificate.
Use with Alternate I.
Use with Alternate II.
Use with Alternate III.
Use with Alternate IV.
Use with Alternate V.
(vi) 252.226-7002, Representation for Demonstration Project for Contractors Employing Persons with Disabilities.
(vii) 252.232-7015, Performance-Based Payments--Representation.
(g) The Offeror has completed the annual representations and certifications electronically via the SAM website at After https://www.sam.gov reviewing the SAM database information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-7 and paragraph (f) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.203-1); except for the changes identified below [ ]. These amended representation(s) and/or certificationOfferor to insert changes, identifying change by provision number, title, date
(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.
FAR/DFARS provision No. Title Date Change
Any changes provided by the Offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database.
(End of provision)
Section L - Instructions, Conditions, & Notices to Offerors or Quoters
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.
Jan 2017
52.204-7 System for Award Management-Registration. (Deviation 2026-O0038) Feb 2026
52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026- O0038)
Feb 2026
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023
FAR Clauses Incorporated by Full Text
52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns. (Deviation 2026-O0038) (Tailored)
(Feb 2026)
Notice of Price Evaluation preference for HUBZone Small Business Concerns (Feb 2026) (Deviation 2026-O0038)
(a) Evaluation preference.
(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except-
(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and
(ii) Otherwise successful offers from small business concerns.
(b) . A HUBZone small business concern may choose to waive the evaluation preference. If the concern waives the Waiver of evaluation preference preference, the factor will be added to its offer for evaluation purposes.
[ ] Offeror chooses to waive the evaluation preference.
(c) A HUBZone joint venture agrees that, in the performance of the contract, at least 40 percent of the aggregate work performed by the Joint venture.
joint venture shall be completed by the HUBZone small business parties to the joint venture. Work performed by the HUBZone small business parties to the joint venture must be more than administrative functions.
(End of provision)
Section M - Evaluation Factors for Award
| Solicitation/Contract Form Continuation |
| Continuation of Supplies or Services and Prices/Costs |
| Continuation of Description |
| Continuation of Packaging and Marking |
| Continuation of Inspection and Acceptance |
| Continuation of Deliveries or Performance |
| Continuation of Accounting and Appropriation Data |
| Special Contract Requirements |
| Contract Clauses |
| List of Attachments |
| Representations, Certification, & Other Statements |
| Instructions, Conditions, & Notices to Offerors or Quoters |
| Evaluation Factors for Award |
| 10servicedisabledcheckbox: Off |
| 20schedule: See Schedule |
| topmostSubform[0]: |
| Page1[0]: |
| schedule2[0]: |
| schedule3[0]: |
| schedule4[0]: |
| schedule5[0]: |
| schedule6[0]: |
| schedule7[0]: |
| schedule8[0]: |
| quantity1[0]: |
| quantity2[0]: |
| quantity3[0]: |
| quantity4[0]: |
| quantity5[0]: |
| quantity6[0]: |
| quantity7[0]: |
| quantity8[0]: |
| unit1[0]: |
| unit2[0]: |
| unit3[0]: |
| unit4[0]: |
| unit5[0]: |
| unit6[0]: |
| unit7[0]: |
| unit8[0]: |
| unitprice1[0]: |
| unitprice2[0]: |
| unitprice3[0]: |
| unitprice4[0]: |
| unitprice5[0]: |
| unitprice6[0]: |
| unitprice7[0]: |
| unitprice8[0]: |
| amount1[0]: |
| amount2[0]: |
| amount3[0]: |
| amount4[0]: |
| amount5[0]: |
| amount6[0]: |
| amount7[0]: |
| amount8[0]: |
| ITEMNUM1[0]: |
| ITEMNUM2[0]: |
| ITEMNUM3[0]: |
| ITEMNUM4[0]: |
| ITEMNUM5[0]: |
| ITEMNUM6[0]: |
| ITEMNUM7[0]: |
| ITEMNUM8[0]: |
| 25accountingdata: See Section G - Contract Administration Data |
| 26totalaward: |
| 27acheckbox: Yes |
| 27bcheckbox: Off |
| 27aarecheckbox: Yes |
| 27barecheckbox: Off |
| 27aarenotcheckbox: Off |
| 27barenotcheckbox: Off |
| 28contractorrequiredcheckbox: Off |
| 28numberofcopies: |
| 29awardcontractcheckbox: Off |
| 29offerreference: |
| 29offerdate: |
| 29exceptions: See Schedule |
| 30bsignername: |
| 30bsignertitle: |
| 30csigneddate: |
| 31bcontractingofficer: |
| 31csigneddate: |
| 17bremittanceisdifferentcheckbox: Off |
| 01reqnumber: |
| pagenumber: 21 |
| 02contractnumber: |
| 03awarddate: |
| 04ordernumber: |
| 05solicitationnumber: N0040627Q0006 |
| 06solissuedate: 16 Nov 2026 |
| 07acontactname: Jennifer Martinez |
| 07bcontactphone: 564-226-1960 |
| 08offerduedate: 20 Nov 2026 |
| 08offerduedatelocaltime: 02:00 PM |
| 09issuedbycode: N00406 |
| 10unrestrictedcheckbox: Yes |
| 10setasidecheckbox: Off |
| 10setasidepercent: |
| 09issuedby: NAVSUP FLT LOG CTR PUGET SOUND |
PUGET SOUND (FISCPS), 467 W STREET
BREMERTON, WA 98314-5100
UNITED STATES
Jennifer Martinez, Email: jennifer.a.martinez42.civ@us.navy.mil Telephone: 564-226-1960
| 10smallbusinesscheckbox: Off |
| 10wosbcheckbox: Off |
| 10hubzonecheckbox: Off |
| 10edwosbcheckbox: Off |
| 10naics: 336611 |
| 10_8acheckbox: Off |
| 10sizestandard: |
| 11seeschedulecheckbox: Off |
| 12discountterms: |
| 13athiscontractcheckbox: Off |
| 13brating: |
| 14rfqcheckbox: Yes |
| 14ifbcheckbox: Off |
| 14rfpcheckbox: Off |
| 15delivertocode: |
| 16administeredbycode: |
| 15deliverto: See Schedule |
| 16administeredby: |
| 17acontractorcode: |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .