Section A - Solicitation/Contract Form

Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-up Pumps (Overhaul)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FLCPS SRF 001 FLCPS_SRF_NOTICE_TO_OFFERORS (Aug 2025)

This Solicitation is for Overhaul of the Steering HPU Main Hydraulic Back-up Pumps

1. NOTICE TO ALL OFFERORS: The Government anticipates awarding a firm, fixed price contract in accordance with FAR Part 12 and 13 in response to quotes received in response to this solicitation. A firm, fixed price contract places the maximum risk and full responsibility for all costs and resulting profit or loss on the contractor, offerors are advised to consider these risks when pricing their quotes.

2. See block 8 on page 1 of the solicitation for the closing date and time.

3. Questions regarding the solicitation's terms, conditions, specifications, and/or the performance work statement (PWS) must be submitted in writing via email to the Contracting Official no later than 3 calendar days prior to the solicitation's closing date. Questions received after this deadline may not be considered.

Name: Reg Agahan Email: regel.a.agahan.civ@us.navy.mil

4. In accordance with FAR 13.106-2(b)(3), the Government will select the most advantageous offer based on the following evaluation factors:

Technical including delivery date, price, and past performance in no order of relative importance.

Note: All overhaul procedures, testing, and replacement components must adhere strictly to OEM standards and specifications. Only genuine OEM parts shall be used for the overhaul of the Denison legacy pumps.

5. SINGLE AWARD FOR ALL ITEMS: Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the quoter whose quote is considered in the best interest of the government, price and other factors considered. Therefore, quoters who quote less than the entire effort specified herein may be determined to be unacceptable.

6. "EXCEPTIONS: All quoters MUST note all exceptions from the solicitation's terms, conditions, specifications, and/or the PWS, if any. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within the solicitation."

7. Submission of invoices will be via WAWF; see Clause 252.232-7006.

8. Delivery and Shipping Information

U.S. Naval Base Yokosuka Japan

9. Your company must be registered in the System for Award Management (SAM) to be eligible for a government award. Registration is always free. You can register at the following link: https://sam.gov/

LIST YOUR COMPANY SIZE: LARGE OR SMALL

YOUR PHONE NUMBER:

YOUR E-MAIL ADDRESS:

YOUR SAM REGISTERED CAGE CODE NUMBER:

YOUR NAME:

PLEASE PROVIDE:

NAVAL SUPPLY Weapon Systems Support (NAVSUP WSS Transportation)Shipment Request Procedures

I. INTRODUCTION

For this FOB Origin procurement, the Government will arrange for transportation and pay all associated transportation costs through the NAVSUP WSS Shipment Processing (SP) office. NAVSUP WSS will process shipments of materials from within the United States to CONUS (Continental United States)/OCONUS (Outside Continental United States) consignees with delivery terms Free On-Board (FOB) Origin.

N0040626QS087

Contractors/vendors shall complete the Naval Supply Systems Command automated Ready-to-Ship (RTS) web form by accessing the link provided below in Section II. By completing the form on line, the NAVSUP WSS at Norfolk, VA will receive an email of the shipment request immediately and will act on it as soon as possible during their normal working hours of 7:30 AM to 6:00 PM Eastern Time Monday through Friday. In response, NAVSUP WSS will provide MANDATORY USE shipping labels to the contractor/vendor. The contractor/vendor will arrange for shipment with the NAVSUP WSS designated carrier IMMEDIATELY upon receipt of the shipping labels. If the NAVSUP WSS provided shipping labels are not used, the contractor/vendor will experience delays and additional work to reconcile the transportation payment under the NAVSUP WSS tracking number and possible additional costs not covered under the contract or NAVSUP WSS Transportation. If the contractor/vendor turns an ordered vehicle away and a vehicle furnished not used charge is incurred the contractor/vendor is responsible for payment. If the contractor/vendor detains the vehicle and incurs a detention charge the contractor/vendor is responsible for payment. International small parcel shipment documents are invalid after five business days. If the vendor incurs any extra costs with the carrier outside of the CBL/GBL it is the vendors responsibility for payment. NAVSUP WSS does not accept hazardous or explosive shipments.

CONTRACTORS/VENDORS ARE NOT AUTHORIZED TO ARRANGE FOR TRANSPORTATION OR PAY TRANSPORTATION COSTS

FOR SHIPMENT OF FOB ORIGIN PROCUREMENT.

II. PROCEDURES FOR CONTRACTORS TO REQUEST READY-TO-SHIP (RTS) NOTICES

When the cargo is ready for shipment, the contractor/vendor will submit their shipping request to NAVSUP WSS using the following procedures:

Click on the link at: https://mynavsup-public.nag.navy.mil/public/ops$mailer.ready_to_ship_form to open the NAVSUP WSS RTS Web Form.

The contractor/vendor is required to fill in all data fields marked with a red asterisk under the headings “Vendor Information” and “Package Information.” The fields not marked with a red asterisk and the heading “Additional Notes” are optional fields to be filled in at the contractor’s /vendor’s discretion. Click on the blue question mark at the right of each data field to access “On-line Data Element Help” which explains the data required in that field. If shipping labels are being requested for multiple packages, enter the data for the first package under “Package Information” then click the “Store Pkg Info” button. Repeat this procedure for each package. When all data has been entered on the electronic form, click the “Submit” button.

Container Shipments: containers take longer to book and arrange for loading. If you can provide reliable dimensions and weight estimates for the cargo, send the initial shipping request THREE WEEKS before your requested container load date.

If you have any questions regarding the web form, contact NAVSUP WSS Transportation directly at (757) 443-5449.

NOTE: Incomplete or missing information will significantly delay the process of arranging transportation.

III. CONTRACTING OFFICER SHALL PROVIDE THE FOLLOWING INFORMATION:

*Information provided at time of Award.

1. Contract Number: ____________________________________

2. Transportation Control Number (TCN): __________________

3. Transportation Priority (TP): ___________________________

4. Required Delivery Date (RDD): _________________________

5. Transportation Account Code (TAC): ____________________

6. Destination DODAAC: ________________________________

7. Special Destination Information (optional; however if this category is selected, ALL of its fields are mandatory):

a. Destination Activity Name: _____________________

b. Destination Street Address: ______________________

c. Destination City: ______________________________

d. Destination State: _____________________________

e. Destination Zip: _______________________________

f. Destination Country: ___________________________

g. Destination POC: ______________________________

h. Destination POC Phone: _________________________

i. Destination POC Email: _________________________

j. Destination Authorizer Name: ____________________

k. Destination Authorizer Phone: ____________________

IV. NAVSUP WSS CONTACT INFORMATION

NOTE: The preferred method of contact is through email. Phone numbers are provided only for emergencies.

For Assistance Email (preferred): navsup_nfmgt.fct@navy.mil Fax: (757) 443-5517 Phone: (757) 443-5449 Business Hours: M-F 7:00 AM to 3:30 PM ET.

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

The contractor shall provide all labor, materials, and services necessary to receive, inspect, overhaul, test, and ship one (1) Government-Furnished Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-Up Pumps in accordance with the Performance Work Statement.

Manufacturer: Denison

Serial No.: 1373

Pricing Arrangement: Firm Fixed Price

1 Each

The contractor shall provide all labor, materials, and services necessary to receive, inspect, overhaul, test, preserve, and ship one (1) Government-Furnished Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-Up Pumps.

Manufacturer: Denison

Serial No.: 2409

Pricing Arrangement: Firm Fixed Price

1 Each

Section C - Description/Specifications/Statement of Work

1. GENERAL SCOPE OF WORK:

1.1. This performance work statement (PWS) defines the scope of the contract; identifies technical reference documents applicable to performance of this contract; and describes the general tasks that the Government will require under this contract in support of the (LCC- ).

1.2. The contractor shall receive, overhaul, and ship Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-Up Pumps Serial No. 1373 and 2409.

2. REFERENCES:

2.1. NSI FY25 NAVSEA Standard Items

2.2. LI FY25 Local Standard Items

2.3. TGI 3819P56101A01, F/O - OVERHAUL STEERING HPU BACK-UP PUMPS SER NO. 1373 AND 2409

3. REQUIREMENTS:

3.1. Contractor will receive item listed in 1.3.1 of reference 2.3 on or before 04/27/2026.

3.2. Contractor will receive item listed in 1.3.2 of reference 2.3 on or before 10/19/2026.

3.3. Contractor shall overhaul and shop test item listed in 1.3.1 and 1.3.2 of reference 2.3 in accordance with reference 2.1, 2.2, and 2.3.

3.4. Contractor shall submit one legible copy, in hard copy or approved transferrable media, of the test certification data sheet to the SUPERVISOR in accordance with paragraph 2.3.3 of reference 2.3.

3.5. Contractor shall crate and ship overhauled item listed in 1.3.1 and 1.3.2 of reference 2.3 to

U.S. Naval Base Yokosuka Japan

3.6. Overhauled item listed in 1.3.1 of reference 2.3 must arrive at paragraph 3.5 address on or before 08/28/2026.

3.7. Overhauled item listed in 1.3.2 of reference 2.3 must arrive at paragraph 3.5 address on or before 03/19/2027.

4. GOVERNMENT FURNISHED PROPERTY/SERVICES:

4.1. See 1.3.1 and 1.3.2

5. CONTRACTOR FURNISHED PROPERTY:

5.1. The Contractor shall provide all equipment and material necessary to accomplish paragraph 3 requirements.

6. PLACE OF PERFORMANCE:

6.1. The worksite is at the contractor facility.

7. POINT OF CONTACT (POC):

7.1. SPONSOR / PROJECT POC

7.2. PROJECT POC

7.3. PROJECT POC

7.4. TECHNICAL POC

7.5. FINANCIAL POC

8. PERIOD OF PERFORMANCE:

8.1. The period of performance shall be in accordance with Section F " Deliveries or Performance".

9. TRAVEL REQUIREMENTS:

9.1. Travel to U.S. Naval Ship Repair Facility & JRMC Yokosuka not required.

10. TRANSPORTATION OF THE EQUIPMENT/MATERIAL:

10.1. Shipping and handling of item listed in 1.3.1 and 1.3.2 of reference 2.3 from the contractor facility to U.S. Naval Ship Repair Facility & JRMC Yokosuka shall be through NAVSUP WSS Transportation.

12. GENERAL INFORMATION:

12.1. Nothing contained in the performance work statement shall relieve the Contractor from complying with applicable Federal, state, and local Japanese laws, codes, ordinances, and regulations, including the obtaining of licenses and permits that may be required for the Contractor or Subcontractor(s) to perform a particular function, such as hazardous waste handling or disposal.

13. RESTRICTIONS:

13.1. Restricted Colors. Naval activities use the colors magenta and yellow to identify specially controlled materials. The contractor is specifically prohibited from using magenta and yellow colored plastic wrapping materials or bags, tape, or other covering materials.

14. SAFETY AND ENVIRONMENTAL:

14.1. Safety Requirements. The contractor shall establish, administer, and enforce safety requirements that meet the Occupational Safety and Health Administration (OSHA) requirements, Environmental Safety & Occupational Health and RADCON (ESHR) Department safety and health requirements, and all applicable work item references.

14.2. Safety Equipment. The contractor shall provide and use all required safety equipment during the performance of work in accordance with paragraph 15.1.

14.3. Environmental Requirements. Work performed under this contract shall be in compliance with all Japanese, Navy, Federal, State and local regulations, ESHR Department requirements, and all applicable work items references, pertaining to the environment at all times.

14.4. Responsibilities. The contractor bears sole responsibility for the safety of their employees and compliance with environmental regulations.

16. SECURITY

16.1. The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use.

17. PERFORMANCE REQUIREMENT STATEMENT SUMMARY

17.1.

Primary Performance Standard Performance Standard/AQL

Performance Assessment Method

Replacement and testing of required items Services performed meet requirements 100% of the time

Review of performance by Surveillance Officer

The contractor maintained close liaison and good communications with the Government

Any problems or questions encountered by either party are addressed

Review of performance by Surveillance Officer

The contractor invoiced in a timely manner and in accordance with the contract

Invoices submitted with COR /Surveillance Officer signature

Review of performance by Surveillance Officer

Combating Trafficking in Persons - Using mindful observance and attentive listening the Surveillance Officer will monitor the contractor's performance regarding trafficking in persons such that non-compliance with FAR clause 52.222-50, Combating Trafficking in Persons, is brought to the immediate attention of the contracting officer.

100% compliance with FAR 52.222-50

All times the Surveillance Officer interfaces with the contractor.

Requirements Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-up Pumps (Overhaul)

Section D - Packaging and Marking

1. Preservation, packaging, and packing: Shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The unit pack quantity that applies to items under this contract is "Industry Standard" to provide protection against physical damage, corrosion, or deterioration during all phases of transportation, handling, and storage. The Contractor is responsible for determining the appropriate level of packaging required to ensure the materiel arrives at its destination free of damage.

2. Prohibited Packing Materials: The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, computer paper, and similar hydroscopic or non-neutral material) is prohibited.

3. Non-Manufactured Wood Packing: All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to https://www.aphis.usda.gov/aphis/ourfocus/planthealth/import-information/wood-packaging-material for wood packing policy, enforcement regulations, and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

4. Metals IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products

a. Metal plates, strips, sheets, bars, rods, angle stock, tubes, and pipe are to be packed for shipment as follows:

i. Plate, sheet, and strip must be packed in snug-fitting boxes reinforced with steel straps or in metal packs. Snug-fitting boxes are defined as fully enclosed rigid containers having length, width, and depth.

ii. Bar, rod, angle stock, pipe, and tube shall be packed in snug-fitting crates with solid wood ends or in boxes for protection. Snug-fitting crates are defined as a container of an open-frame construction.

iii. Single pieces or bundles of steel stock must have a snug-fitting wood cap secured over each end.

5. Shipment by Air:

a. Shipment through the Defense Transportation System: DTR 4500.9-R, Part II, outlines the movement and establishes uniform handling of cargo throughout the Defense Transportation System. Shippers are responsible for ensuring all cargo tendered to Air Terminals is packed, marked, labeled, and documented in accordance with the DTR 4500.9-R, Part II. Publication is available at: https://www.ustranscom.mil/dtr/dtrp2.cfm.

b. Shipment to/through a military aerial port or military Consolidation and Containerization Point (CCP) to include but not limited to those DOD Activity Address Codes (DODAAC) listed below, for onward movement to an OCONUS customer shall comply with AFMAN 24-605 V2, Ch 3, Air Transportation Operations. Publication is available at: https://static.e-publishing.af.mil/production/1/af_a4/publication/dafi24-605v2/dafi24-605v2.pdf

SW3225 - CCP (Tracy, CA) SW3123 - CCP (New Cumberland, PA) SW3142 - Yokosuka, Japan N45627 - Norfolk NAS Terminal FB4427 (Terminating)/FY9150 (In-Transit) - Travis AFB FB4497 (Terminating)/FY9125 (In-Transit) - Dover AFB FB4418 (Terminating)/FY4462 (In-Transit) - Joint Base Charleston AFB FB4484 (Terminating)/FY4484 (In-Transit) - Joint Base McGuire-Dix-Lakehurst FB4479 - Joint Base Lewis-McChord

c. Blocking, bracing, dunnage and shoring must be as specified in DTR 4500.9-R, Part II, Chapter 208, para. L, https://www.ustranscom.mil/dtr/dtrp2.

cfm

d. Additional information can be found at https://www.dla.mil/Logistics-Operations/Packaging/

6. Contract Documentation: A copy of the contract or purchase order shall be included with the shipment inside the lead package or clearly visible on the outside of the lead container in a sealed pouch or envelope.

6. MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)

(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.

(ii) All unit and exterior containers/packs shall, as a minimum, be marked as follows:

1. National stock number (NSN), when available, or Federal stock number (FSN), when NSN is not available, or part number when neither NSN or FSN are available.

2. Noun nomenclature cited on contract or order.

3. Quantity and unit of issue.

4. Contract, or order number.

5. From: (Contractor's Name & Address)

6. To: (See delivery Information / Address)

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Source Instructions: No Further Instructions

DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

Government Representative, Government Representative Telephone:

Inspection and Acceptance Location

Both Source Instructions: No Further Instructions

DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

Government Representative, Government Representative Telephone:

Section F - Deliveries or Performance

Overall Contract Delivery Period

Government Government Furnished Property (GFP)

Line Item Delivery Schedule Quantity Address and POC

Delivery On Or Before Delivery Date 28 Aug 2026

Period of Performance From 20 Apr 2026 To 28 Aug 2026

1 Each Ship To DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

Delivery On Or Before Delivery Date 19 Mar 2027

Period of Performance From 12 Oct 2026 To 19 Mar 2027

1 Each Ship To DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.211-17 Delivery of Excess Quantities. Sep 1989 52.247-29 F.o.b. Origin. Feb 2006

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7008 Assignment of Claims (Overseas). Jun 1997

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC ____

Admin DoDAAC ____

Inspect By DoDAAC ____

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

Government-Furnished Property Made Available

In accordance with the Government Property clause (FAR 52.245-1), the Government will furnish the following property to the contractor, (Contractor's Facility), for the purpose of performing the overhaul services required under CLIN 0001 and CLIN 0002.

A. PROPERTY TO BE FURNISHED:

Item Description Manufacturer Serial No. Qty Unit of Issue

Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-Up Pump Denison Hydraulics (Parker Hannifin) 1373 1 Each

Steering Hydraulic Power Unit (HPU) Main Hydraulic Back-Up Pump Denison Hydraulics (Parker Hannifin) 2409 1 Each

B. SCHEDULE OF GFP DELIVERY TO CONTRACTOR:

Serial No. 1373 (for CLIN 0001): The contractor shall receive this unit at its facility on or before April 27, 2026.

Serial No. 2409 (for CLIN 0002): The contractor shall receive this unit at its facility on or before October 19, 2026.

C. ADDITIONAL INFORMATION:

The property will be shipped from the U.S. Naval Ship Repair Facility & JRMC in Yokosuka, Japan.

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-2 Security Requirements. Mar 2021 52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.232-18 Availability of Funds. Apr 1984 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.245-1 Government Property. Sep 2021 52.245-9 Use and Charges. Apr 2012

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors.

Jan 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous

252.223-7006 Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023

252.223-7998 Prohibition on Procurement of Certain Items Containing Perfluorooctane Sulfonate or Perfluorooctanoic Acid. (Deviation 2022-O0010)

Apr 2023 Deviation 2022-O0010 Apr 2023

252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

Aug 2024 Deviation 2024-O0014 Aug 2024

252.225-7976 Contractor Personnel Performing in Japan (DEVIATION 2018-O0019) Aug 2018 Deviation 2018-O0019 Aug 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.245-7003 Contractor Property Management System Administration Jan 2025 252.245-7005 Management and Reporting of Government Property. Jan 2024 252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.246-7006 Warranty Tracking of Serialized Items. Mar 2016 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Jan 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) A 52.233-3, Protest After Award (31A U.S.C.A 3553).(Aug 1996)

(7) A 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19A U.S.C.A 3805A note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

[ ] 52.203-6, Restrictions on Subcontractor Sales to the Government with (41A U.S.C.A 4704 and 10 U.S.C. (1) (Jun 2020), Alternate I (Nov 2021) 4655).

[ ] 52.203-13, Contractor Code of Business Ethics and Conduct (41A U.S.C.A 3509)).(2) (Nov 2021)

[ ] 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (Jun 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (Nov 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

XX 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31A U.S.C.A 6101A note).(5) (Jun 2020)

[ ] [Reserved].(6)

[ ] 52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (Oct 2016)

[ ] 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (Oct 2016)

[ ] 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (Jun 2023)

[ ] 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)

[ ] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

[ ] Alternate I of 52.204-30.(ii) (Dec 2023)

XX (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31A U.S.C.A 6101A note).Jan

[ ] 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41A U.S.C.A 2313).(13) (Oct 2018)

[ ] [Reserved].(14)

[ ] 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15A U.S.C.A 657a).(15) Oct 2022

[ ] 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) Oct 2022 preference, it shall so indicate in its offer) (15A U.S.C.A 657a).

[ ] [Reserved](17)

[ ] (18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (15A U.S.C.A 644).(Nov 2020)

[ ] Alternate I of 52.219-6.(ii) (Mar 2020)

[ ] (19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (15A U.S.C.A 644).(Nov 2020)

[ ] Alternate I of 52.219-7.(ii) (Mar 2020)

[ ] 52.219-8, Utilization of Small Business Concerns (15A U.S.C.A 637(d)(2) and (3)).(20) ( )Jan 2025

[ ] (21)

(i) 52.219-9, Small Business Subcontracting Plan (15A U.S.C.A 637(d)(4)).( )Jan 2025

[ ] Alternate I of 52.219-9.(ii) (Nov 2016)

[ ] Alternate II of 52.219-9.(iii) (Nov 2016)

[ ] Alternate III of 52.219-9.(iv) (Jun 2020)

[ ] Alternate IV of 52.219-9.(v) ( )Jan 2025

[ ] (22)

(i) 52.219-13, Notice of Set-Aside of Orders (15A U.S.C.A 644(r)).(Mar 2020)

[ ] Alternate I of 52.219-13.(ii) (Mar 2020)

[ ] 52.219-14, Limitations on Subcontracting ( ) (15A U.S.C.A 657s).(23) Oct 2022

[ ] 52.219-16, Liquidated Damages-Subcontracting Plan (15A U.S.C.A 637(d)(4)(F)(i)).(24) (Sep 2021)

[ ] 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible (25) Under the SDVOSB Program ( ) (15A U.S.C.A 657f).Feb 2024

[ ] (26)

(i) 52.219-28, Small Business Program Rerepresentation (15A U.S.C.A 632(a)(2)).Postaward ( )Jan 2025

[ ] Alternate I of 52.219-28.(ii) (Mar 2020)

[ ] 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) Oct ) (15A U.S.C.A 637(m)).2022

[ ] 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15A U.S.C.A 637(m)).Oct 2022

[ ] 52.219-32, Orders Issued Directly Under Small Business Reserves (15A U.S.C.A 644(r)).(29) (Mar 2020)

[ ] 52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (Sep 2021)

XX(31) 52.222-3, Convict Labor (E.O.11755).(Jun 2003)

XX(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(Jan 2025)

[ ] [Reserved](33)

[ ] [Reserved](34)

[ ] (35)

(i) 52.222-35, Equal Opportunity for Veterans (38A U.S.C.A 4212).(Jun 2020)

[ ] Alternate I of 52.222-35.(ii) (Jul 2014)

XX(36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29A U.S.C.A 793).

[ ] Alternate I of 52.222-36.(ii) (Jul 2014)

[ ] 52.222-37, Employment Reports on Veterans ( ) (38A U.S.C.A 4212).(37) Jun 2020

[ ] 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (Dec 2010)

XX(39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22A U.S.C.A chapterA 78 and E.O. 13627).

XX(ii) Alternate I (Mar 2015) of 52.222-50 (22A U.S.C.A chapterA 78 and E.O. 13627).

[ ] (40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (Jan 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42A U.S.C.A 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] Alternate I of 52.223-9 (42A U.S.C.A 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf (ii) (May 2008) items.)

[ ] 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (May 2024) et seq.

[ ] 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, ).(43) (May 2024) et seq.

[ ] 52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (May 2024) et seq.

[ ] 52.223-21, Foams (42 U.S.C. 7671, ).(45) (May 2024) et seq.

[ ] 52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) and 42 U.S.C. 7671l).

[ ] (47)

(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(Jan 2017)

[ ] Alternate I of 52.224-3.(ii) (Jan 2017)

[ ] (48)

(i) 52.225-1, Buy American-Supplies (41A U.S.C.A chapterA 83).(Oct 2022)

[ ] Alternate I of 52.225-1.(ii) (Oct 2022)

[ ] (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (NOV 2023) 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] Alternate I [Reserved].(ii)

[ ] Alternate II of 52.225-3.(iii) (Jan 2025)

[ ] Alternate III of 52.225-3.(iv) (Feb 2024)

[ ] Alternate IV (Oct 2022) of 52.225-3.(v)

[ ] 52.225-5, Trade Agreements (19A U.S.C.A 2501, ., 19A U.S.C.A 3301 note).(50) (NOV 2023) et seq

XX(51) 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (Feb 2021) Assets Control of the Department of the Treasury).

[ ] 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National (52) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42A U.S.C.A 5150).(53)

[ ] 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42A U.S.C.A 5150).(54) (Nov 2007)

XX(55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(May 2024)

[ ] 52.229-12, Tax on Certain Foreign Procurements .(56) (Feb 2021)

[ ] 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41A U.S.C.A 4505, 10 U.S.C. (57) (Nov 2021) 3805).

[ ] 52.232-30, Installment Payments for Commercial Products and Commercial Services (41A U.S.C.A 4505, 10 U.S.C. 3805).(58) (Nov 2021)

XX(59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31A U.S.C.A 3332).(Oct2018)

[ ] 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31A U.S.C.A 3332).(60)

[ ] 52.232-36, Payment by Third Party (31A U.S.C.A 3332).(61) (May 2014)

[ ] 52.239-1, Privacy or Security Safeguards (5A U.S.C.A 552a).(62) (Aug 1996)

[X] 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign (63) Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

[ ] 52.242-5, Payments to Small Business Subcontractors (15A U.S.C.A 637(d)(13)).(64) (Jan 2017)

[ ] (65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10A U.S.C.A 2631).(Nov 2021)

[ ] Alternate I of 52.247-64.(ii) (Apr 2003)

[ ] Alternate II of 52.247-64.(iii) (Nov 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ]Contracting Officer check as appropriate.

[ ] 52.222-41, Service Contract Labor Standards (41A U.S.C.A chapter67).(1) (Aug 2018)

[ ] 52.222-42, Statement of Equivalent Rates for Federal Hires (29A U.S.C.A 206 and 41A U.S.C.A chapterA 67).(2) (May 2014)

[ ] 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (Aug 2018) (29A U.S.C.A 206 and 41A U.S.C.A chapterA 67).

[ ] 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41A U.S.C.(4) A chapterA 67).

[ ] 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of (5) Certain Equipment-Requirements (May 2014) (41A U.S.C.A chapterA 67).

[ ] 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (May 2014) (41A U.S.C.A chapterA 67).

[ ] 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (Jan 2022)

[ ] 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (Jan 2022)

[ ] 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42A U.S.C.A 1792).(9)

[ ] 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. 40118(10) (Jan 2025) (g)).

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded Comptroller General Examination of Record using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41A U.S.C.A 3509).(Nov 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

(B) Alternate I of 52.204-30.(Dec 2023)

(viii) 52.219-8, Utilization of Small Business Concerns (15A U.S.C.A 637(d)(2) and (3)), in all subcontracts that offer further ( )Jan 2025 subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (38A U.S.C.A 4212).(Jun 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29A U.S.C.A 793).(Jun 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38A U.S.C.A 4212).(Jun 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (Dec 2010) accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41A U.S.C.A chapterA 67).(Aug 2018)

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (22A U.S.C.A chapterA 78 and E.O 13627).(Nov 2021)

(B) Alternate I of 52.222-50 (22A U.S.C.A chapterA 78A andA E.O.A 13627).(Mar 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41A U.S.C.A chapterA 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41A U.S.C.A chapterA 67).

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(Jan 2025)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5A U.S.C.A 552a).

(B) Alternate I of 52.224-3.(Jan 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National (Oct 2016) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42A U.S.C.A 1792). Flow down required in accordance (Jun 2020) with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

(xxvii) A 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10A U.S.C.A 2631). Flow (Nov 2021) down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.223-3 Hazardous Material Identification and Material Safety Data. (Feb 2021)

HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (FEB 2021)

(a) "Hazardous material," as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No.313 (including revisions adopted during the term of the contract).

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material (If none, insert )None Identification No.

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No.313, for all hazardous material identified in paragraph (b) of this clause.