2.1.1 26Q0495 SOL Amend 0001.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section B - Supplies or Services & Prices or Costs

The following CLIN(s) / SLIN(s) / ELIN(s) were modified:

INFORMATION FROM TO

Manufacturer's Part Number

N85049/10-48S M85049/10-48S

N0040626Q04950001

Section D - Packaging and Marking

The following clauses were deleted:

Other Clauses

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

FLCPS SRF 007 FLCPS_SRF_DELIVERY (Aug 2025)

PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

(a) shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The Preservation, packaging, and packing unit pack quantity that applies to items under this contract is "Industry Standard".

(b) The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, Prohibited Packing Materials.

computer paper and similar hydroscopic or non-neutral material) is prohibited.

(c) All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum Non-Manufactured Wood Packing.

core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to https://www.aphis.usda.gov/aphis/ourfocus/planthealth/import-information/wood-packaging-material for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

(d) , such as particleboard and plywood, are exempt from this requirement.Manufactured wood

(e) Packing must be sufficient to ensure safe delivery to the final destination without the need for additional repackaging or repair.

(f) All materials shall be packed to withstand multiple modes of transport (truck, rail, sea, or air) and handling by forklifts or cranes.

(g) Heavy items must be crated or skid-mounted to distribute weight evenly and ensure lifting point are accessible and marked.

(h) Packages must be stable, not exceed safe stacking limits, and be secured against movement in transit.

MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)

(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.

(ii) All unit and exterior containers/packs shall, as a minimum, be marked as follows:

1. National stock number (NSN), when available, or Federal stock number (FSN), when NSN is not available, or part number when neither NSN or FSN are available.

2. Noun nomenclature cited on contract or order.

3. Quantity and unit of issue.

4. Contract, or order number.

5. From:_______________________________________________ (Contractor's Name) (Address)

6. To: (See delivery address on page 3-4 or in Section F)

(iii) Markings may be applied by any means which provide legibility.

TRACEABLE FREIGHT

The Contractor shall assume all responsibility for shipment to the specified destination. Shipment must be via a fully traceable commercial freight method. Traceable freight means that the shipment is registered upon shipment with an identifying number. The number is for location of the shipment at any point in transit, including final destination, and verifies shipment arrival at the specified destination. If a shipping method does not provide traceability as defined above, it shall not be used.

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity.

PROOF OF DELIVERY

If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity.

PROOF OF DELIVERY

If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.

Section F - Deliveries or Performance

The following clauses were deleted:

Other Clauses

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

FLCPS SRF 006 FLCPS_SRF_SHIPPING (Aug 2025)

I. INTRODUCTION

For this FOB Origin procurement, the Government will arrange for transportation and pay all associated transportation costs through the NAVSUP WSS Shipment Processing (SP) office (aka NAVSUP GLS, NAVSUP LOC or NOLSC). NAVSUP WSS will process shipments of materials from within the United States to CONUS (Continental United States)/OCONUS (Outside Continental United States) consignees with delivery terms Free On-Board (FOB) Origin.

Contractors/vendors shall complete the Naval Supply Systems Command automated Ready-to-Ship (RTS) web form by accessing the link provided below in Section II. By completing the form on line, the NAVSUP WSS at Norfolk, VA will receive an email of the shipment request immediately and will act on it as soon as possible during their normal working hours of 7:30 AM to 6:00 PM Eastern Time Monday through Friday. In response, NAVSUP WSS will provide MANDATORY USE shipping labels to the contractor/vendor. The contractor/vendor will arrange for shipment with the NAVSUP WSS designated carrier IMMEDIATELY upon receipt of the shipping labels. If the NAVSUP WSS provided shipping labels are not used, the contractor/vendor will experience delays and additional work to reconcile the transportation payment under the NAVSUP WSS tracking number and possible additional costs not covered under the contract or NAVSUP WSS Transportation. If the contractor/vendor turns an ordered vehicle away and a vehicle furnished not used charge is incurred the contractor/vendor is responsible for payment. If the contractor/vendor detains the vehicle and incurs a detention charge the contractor/vendor is responsible for payment. International small parcel shipment documents are invalid after five business days. If the vendor incurs any extra costs with the carrier outside of the CBL/GBL it is the vendors responsibility for payment. NAVSUP WSS does not accept hazardous or explosive shipments.

CONTRACTORS/VENDORS ARE NOT AUTHORIZED TO ARRANGE FOR TRANSPORTATION OR PAY TRANSPORTATION COSTS FOR

SHIPMENT OF FOB ORIGIN PROCUREMENT.

II. PROCEDURES FOR CONTRACTORS TO REQUEST READY-TO-SHIP (RTS) NOTICES

When the cargo is ready for shipment, the contractor/vendor will submit their shipping request to NAVSUP WSS using the following procedures:

Click on the link at https://mynavsup-public.nag.navy.mil/public/ops$mailer.ready_to_ship_form to open the NAVSUP WSS RTS Web Form. The contractor/vendor is required to fill in all data fields marked with a red asterisk under the headings "Vendor Information" and "Package Information."

The fields not marked with a red asterisk and the heading "Additional Notes" are optional fields to be filled in at the contractor's/vendor's discretion.

Click on the blue question mark at the right of each data field to access "On-line Data Element Help" which explains the data required in that field. If shipping labels are being requested for multiple packages, enter the data for the first package under "Package Information" then click the "Store Pkg Info" button. Repeat this procedure for each package. When all data has been entered on the electronic form, click the "Submit" button.

Container Shipments: containers take longer to book and arrange for loading. If you can provide reliable dimensions and weight estimates for the cargo, send the initial shipping request THREE WEEKS before your requested container load date.

If you have any questions regarding the web form, contact NAVSUP WSS Transportation directly at (757) 443-5449 or usn.norfolk.navsupwssnorf.

mbx.navsup-nfmgt1@us.navy.mil NOTE: Incomplete or missing information will significantly delay the process of arranging transportation.

III. CONTRACTING OFFICER SHALL PROVIDE THE FOLLOWING INFORMATION:

*Information provided at time of Award.

Contract Number: ____________________________________ Transportation Control Number (TCN): __________________ Transportation Priority (TP): ___________________________ Required Delivery Date (RDD): _________________________ Transportation Account Code (TAC): ____________________ Destination DODAAC: ________________________________

** YOKOSUKA - USE TCN (FIRST 5 DIGITS) & DODAAC N62758

IV. NAVSUP WSS CONTACT INFORMATION

NOTE: The preferred method of contact is through email. Phone numbers are provided only for emergencies.

For Assistance Email (preferred): navsup_nfmgt.fct@navy.mil Fax: (757) 443-5517 Phone: (757) 443-5449 Business Hours: M-F 7:00 AM to 3:30 PM ET.

PUGET SOUND (FISCPS), 467 W STREET

BREMERTON, WA 98314-5100

UNITED STATES

Crista CARRIER, Email: crista.m.carrier2.civ@us.navy.mil Telephone: 5612302375 AdminBy:

SCD: PAS: