4.0 26Q045 0001 AMEND.pdf
PDF 636 KB Posted
- Attached to
- Procurement of - "Standard Beds, Box Springs, Mattresses & Headboards" Aboard Naval Vessel
- Solicitation number
- N0040626Q0450
About this file
This is a Standard Form 30 Amendment to Solicitation (Post-Close Amendment 0001) issued by Naval Supply Fleet Logistics Center Puget Sound for solicitation N0040626Q0450, effective August 19, 2026.
The amendment modifies a procurement for Standard Beds, Box Springs, Mattresses, and Headboards in support of the USS Mustin and SRF-JRMC Yokosuka. Three substantive changes are made: (1) removal of the "Brand Name OEM" requirement to allow equivalent products beyond specified original equipment manufacturers; (2) clarification that F.O.B. Origin (Shipping Point) terms apply rather than F.O.B. Destination; and (3) extension of the response due date from August 17, 2026 at 1200 PDT to August 21, 2026 at 1200 PDT. The solicitation anticipates awarding a Firm-Fixed-Price Supply-Type Purchase Order per the Revolutionary FAR Overhaul Part 12, placing maximum cost risk and responsibility on the contractor. Contract administration utilizes Wide Area WorkFlow (WAWF) for invoice submission per DFARS 252.232-7006. The government will evaluate quotes based on technical merit (including delivery date), past performance, and price in no particular order of importance, with award anticipated within two weeks of solicitation closing. Packaging and marking requirements follow ASTM-D-3951 standards, with traceable commercial freight required for shipment. The Point of Contact is Walid Aslan (walid.m.aslan.civ@us.navy.mil, 564-226-0000).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4.0 26Q0450 0003 AMEND.pdf | ||
| 4.0 26Q0450 0002 SOL (REDACTED).pdf | ||
| 4.0 26Q0450 0002 AMEND.pdf | ||
| 4.0 26Q0450 SOL (REDACTED).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
R
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES
2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBE
10B. DATED (SEE ITEM 13)
CODE FACILITY CODE
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
Block 14 (Description of Amendment/Modification): This post-close solicitation amendment is to amend the following -
1) Remove the "Brand Name OEM" requirement from the solicitation.
2) Remove any mention of "F.O.B. Destination" language from the solicitation, this is an F.O.B. Origin (Shipping Point) requirement.
3) Extend the closing date from 17 AUG 2026 @ 1200 PDT to 21 AUG 2026 @ 1200 PDT.
The POC for this amendment is Walid Aslan (walid.m.aslan.civ@us.navy.mil).
Section A - Solicitation/Contract Form
The following changes have been made:
INFORMATION FROM TO
Response Due Date 17 Aug 2026 21 Aug 2026
Miscellaneous text in this section has been modified to:
This Solicitation is a requirement for the procurement of "Standard Beds, Box Springs, Mattresses & Headboards", in support of the USS Mustin.1. NOTICE TO ALL OFFERORS: The Government anticipates awarding a Firm-Fixed-Price Supply-Type Purchase Order in accordance with the Revolutionary FAR Overhaul Part 12, in response to quotes received to this solicitation. A Firm-Fixed-Price Purchase Order places the maximum risk and full responsibility for all costs and resulting profit or loss on the contractor, offerors are advised to consider these risks when pricing their quotes.2. See block 8 on page 1 of the solicitation for the closing date and time.3. See block 9 on page 1 of the solicitation for the Contracting Official(s). Please include the Primary and Alternate Point of Contacts identified on SAM.gov in all email communications regarding this solicitation.4. The deadline for submission of questions regarding the solicitation terms, conditions, specifications, is two (2) days prior to the solicitation closing date.5. All responsible sources may submit a quote prior to the solicitation closing date.6. Quotes shall be submitted to the Contracting Official(s) identified in SAM.gov. 7. EXCEPTIONS: All exceptions from the solicitation’s terms, conditions, specifications, shall be provided. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within this solicitation.8. In accordance with RFO 12.203(a), the Government will select the most advantageous offer based on the following evaluation factors in no relative order of importance:RFO 12.203(a)(1) Technical including delivery dateRFO 12.203(a)(2) Past performanceRFO 12.203(a)(3) Price9. The Government anticipates an award resulting from this solicitation on or about two (2) weeks following the solicitation closing due date, inclusive of any solicitation amendment(s).
10. Submission of invoices will be made via WAWF; see DFARS 252.232-7006.11. Please provide the following information with your quote submission:YOUR NAME:YOUR SAM REGISTERED CAGE CODE NUMBER:YOUR E-MAIL ADDRESS:YOUR PHONE NUMBER:BUSINESS SIZE (per provided NAICS code, see block 10 on page 1 of the solicitation):[ ] SMALL BUSINESS CONCERN[ ] OTHER THAN
SMALL BUSINESS CONCERNYOUR BUSINESS MUST BE REGISTERED WITH SYSTEM AWARD
FOR MANAGEMENT (SAM) IN ORDER TO RECEIVE A GOVERNMENT AWARD REGISTRATION
IS ALWAYS FREE; SEE FOLLOWING LINK: HTTPS://WWW.SAM.GOV
N0040626Q04500001
Section B - Supplies or Services & Prices or Costs
The following CLIN(s) / SLIN(s) / ELIN(s) were modified:
INFORMATION FROM TO
Description
BERTH, CABIN STATERMSTANDARD BED, FOR
CABIN STATEROOM, WITH BOX SPRING
STANDARD, MATTRESS STANDARD AND
HEADBOARD CASE,DWG: 805-1749028,BED
COLOR: SAE-AMS-STD-595, #26586 (SEMI-
GROSS),POWDER COATING: MIL-PRF-24712,
TYPE I, CLASS 1,TOP SURFACE: HIGH
PRESSURE PLASTIC LAMINATE, FORMICA,
NATURAL OAK (NO. 346), FINISH 58 (MATTE),
GRADE 50,OR EQUAL (FROM PROVIDED OEMs)
BERTH, CABIN STATERMSTANDARD BED, FOR
CABIN STATEROOM, WITH BOX SPRING
STANDARD, MATTRESS STANDARD AND
HEADBOARD CASE,DWG: 805-1749028,BED
COLOR: SAE-AMS-STD-595, #26586 (SEMI-
GROSS),POWDER COATING: MIL-PRF-24712,
TYPE I, CLASS 1,TOP SURFACE: HIGH
PRESSURE PLASTIC LAMINATE, FORMICA,
NATURAL OAK (NO. 346), FINISH 58 (MATTE),
GRADE 50,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTY, DOUBLE, SIZEBERTH, DOUBLE, SIZE 2,
WITH LADDER & SUBBASE,FOR BERTH:DWG:
805-1634193,SIZE: 39-1/4" (W) X 81-1/2" (L), 25"
VERTICAL SPACING, MATL: ALUMINUM,
BERTH COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712, TYPE I, CLASS 1,FOR SUBBASE:DWG:
S3306-921770,SIZE: 39-1/4" (W) X 81-1/2" (L) X 2"
(H), MATL: CRES 304, FINISH 4, FINISH: NO
COATINGOR EQUAL (FROM PROVIDED OEMs)
BERTY, DOUBLE, SIZEBERTH, DOUBLE, SIZE 2,
WITH LADDER & SUBBASE,FOR BERTH:DWG:
805-1634193,SIZE: 39-1/4" (W) X 81-1/2" (L), 25"
VERTICAL SPACING, MATL: ALUMINUM,
BERTH COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712, TYPE I, CLASS 1,FOR SUBBASE:DWG:
S3306-921770,SIZE: 39-1/4" (W) X 81-1/2" (L) X 2"
(H), MATL: CRES 304, FINISH 4, FINISH: NO
COATING
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, DOUBLE, SIZEBERTH, DOUBLE, SIZE 2,
WITH LADDER & SUBBASE,FOR BERTH:DWG:
805-1634193,SIZE: 39-1/4" (W) X 81-1/2" (L), 25"
VERTICAL SPACING, MATL: ALUMINUM,
BERTH COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712, TYPE I, CLASS 1,FOR SUBBASE:DWG:
S3306-921770,SIZE: 39-1/4" (W) X 81-1/2" (L) X 2"
(H), MATL: CRES 304, FINISH 4, FINISH: NO
COATING,OR EQUAL (FROM PROVIDED OEMs)
BERTH, DOUBLE, SIZEBERTH, DOUBLE, SIZE 2,
WITH LADDER & SUBBASE,FOR BERTH:DWG:
805-1634193,SIZE: 39-1/4" (W) X 81-1/2" (L), 25"
VERTICAL SPACING, MATL: ALUMINUM,
BERTH COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712, TYPE I, CLASS 1,FOR SUBBASE:DWG:
S3306-921770,SIZE: 39-1/4" (W) X 81-1/2" (L) X 2"
(H), MATL: CRES 304, FINISH 4, FINISH: NO
COATING,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, TRANSOMBERTH, TRANSOM, SINGLE,
WITH SUB-BASE,DWG: 805-1637198 TYPE L36 &
805-1637199,SIZE: 42-3/8" W X 48-3/4" H X 83" LG,
RACK COLOR: SAE-AMS-STD-595, #26586,
POWDER COATING: MIL-PRF-24712, TYPE I,
CLASS 1,UPHOLSTERY ARTIFICAL LEATHER
COLOR: ROYAL BLUE,OR EQUAL (FROM
PROVIDED OEMs)
BERTH, TRANSOMBERTH, TRANSOM, SINGLE,
WITH SUB-BASE,DWG: 805-1637198 TYPE L36 &
805-1637199,SIZE: 42-3/8" W X 48-3/4" H X 83" LG,
RACK COLOR: SAE-AMS-STD-595, #26586,
POWDER COATING: MIL-PRF-24712, TYPE I,
CLASS 1,UPHOLSTERY ARTIFICAL LEATHER
COLOR: ROYAL BLUE,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, TRANSOMBERTH, TRANSOM, SINGLE,
WITH SUB-BASE,DWG: 805-1637198 TYPE L36 &
805-1637199,SIZE: 42-3/8" W X 48-3/4" H X 83" LG,
RACK COLOR: SAE-AMS-STD-595, #26586,
POWDER COATING: MIL-PRF-24712, TYPE I,
CLASS 1,UPHOLSTERY ARTIFICAL LEATHER
COLOR: ROYAL BLUE,OR EQUAL (FROM
PROVIDED OEMs)
BERTH, TRANSOMBERTH, TRANSOM, SINGLE,
WITH SUB-BASE,DWG: 805-1637198 TYPE L36 &
805-1637199,SIZE: 42-3/8" W X 48-3/4" H X 83" LG,
RACK COLOR: SAE-AMS-STD-595, #26586,
POWDER COATING: MIL-PRF-24712, TYPE I,
CLASS 1,UPHOLSTERY ARTIFICAL LEATHER
COLOR: ROYAL BLUE,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 1 LOCKER, LEFT-
HAND, WITH SUBBASE, WITHOUT KICKOUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 20-D TYPE-XI STYLE-2 SIZE-4,SIZE; 29-3
/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM, FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS),INSTALL BELOW ITEMS. SFC B-
2B-4 EEBD STOWAGE CONTAINER (2EA), STD
DWG 804-5751208 EEBD STOWAGE CONTAINER
IN BOTTOM LOCKER (1 EA), 804-5959312
DETAIL 26-A. FAN UNIT ASSY (3 EA). FOOT
/HEAD INSERT PANEL (6 EA). BACK PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA) & FAN RECESS (3 EA), SPEC: MIL-C-24500
TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.OR
EQUAL (FROM PROVIDED OEMs)
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 1 LOCKER, LEFT-
HAND, WITH SUBBASE, WITHOUT KICKOUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 20-D TYPE-XI STYLE-2 SIZE-4,SIZE; 29-3
/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM, FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS),INSTALL BELOW ITEMS. SFC B-
2B-4 EEBD STOWAGE CONTAINER (2EA), STD
DWG 804-5751208 EEBD STOWAGE CONTAINER
IN BOTTOM LOCKER (1 EA), 804-5959312
DETAIL 26-A. FAN UNIT ASSY (3 EA). FOOT
/HEAD INSERT PANEL (6 EA). BACK PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA) & FAN RECESS (3 EA), SPEC: MIL-C-24500
TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 1 LOCKER, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICKOUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 20-D TYPE-XI STYLE-2 SIZE-4,SIZE; 29-3
/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM, FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS)INSTALL BELOW ITEMS. SFC B-
2B-4 EEBD STOWAGE CONTAINER (2EA), STD
DWG 804-5751208 EEBD STOWAGE CONTAINER
IN BOTTOM LOCKER (1 EA), 804-5959312
DETAIL 26-A. FAN UNIT ASSY (3 EA). FOOT
/HEAD INSERT PANEL (6 EA). BACK PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA) & FAN RECESS (3 EA), SPEC: MIL-C-24500
TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 1 LOCKER, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICKOUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 20-D TYPE-XI STYLE-2 SIZE-4,SIZE; 29-3
/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM, FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS)INSTALL BELOW ITEMS. SFC B-
2B-4 EEBD STOWAGE CONTAINER (2EA), STD
DWG 804-5751208 EEBD STOWAGE CONTAINER
IN BOTTOM LOCKER (1 EA), 804-5959312
DETAIL 26-A. FAN UNIT ASSY (3 EA). FOOT
/HEAD INSERT PANEL (6 EA). BACK PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA) & FAN RECESS (3 EA), SPEC: MIL-C-24500
TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.OR
EQUAL (FROM PROVIDED OEMs)
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,REMARKS; INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.OR EQUAL (FROM
PROVIDED OEMs)
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,REMARKS; INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.OR EQUAL (FROM
PROVIDED OEMs)
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236OR EQUAL (FROM
PROVIDED OEMs)
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236OR EQUAL (FROM
PROVIDED OEMs)
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-2 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 20" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK PANEL (3 EA). LEE STRAP (6 EA).
TOWEL BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA) & FAN RECESS (3
EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FOR
SUBBASE: DWG; 804-5959312 REV.C DETAIL 75-
D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1/2" (H),
MATL; STEEL, REMARKS; SUBBASE SHALL
NOT BE POWDER COATED AND SHALL BE
PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE,FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
NOT BE INSTALLED. BACK INSERT PANEL (2
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE,FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
EA): BOTTOM BACK INSERT PANEL SHALL
NOT BE INSTALLED. CROSS BRACE ASSEMBLY
SHALL BE INSTALLED ON BACK BOTTOM
SECTION. LEE STRAP (6 EA). TOWEL BAR ASSY
(3 EA). BERTH LIGHT (3 EA). MAGAZINE RACK
(3 EA). CURTAIN TRACK (4 EA): ONE CURTAIN
TRACK SHALL BE INSTALLED ON BACK
BOTTOM SECTION. BERTH CURTAIN (4 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. ONE BERTH
CURTAIN SHALL BE INSTALLED BACK
BOTTOM SECTION. (12) FAN RECESS (3 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. FOR SUBBASE:
DWG; 804-5959312 REV.C DETAIL 75-D, SIZE; 29-
3/4"(W) X 79-1/4"(L) X 2-1/2" (H), MATL; STEEL,
REMARKS; SUBBASE SHALL NOT BE POWDER
COATED AND SHALL BE PRESERVED BY ONE
COAT OF EPOXY MIL-DTL-24441/MILPRF-23236.
OR EQUAL (FROM PROVIDED OEMs)
NOT BE INSTALLED. BACK INSERT PANEL (2
EA): BOTTOM BACK INSERT PANEL SHALL
NOT BE INSTALLED. CROSS BRACE ASSEMBLY
SHALL BE INSTALLED ON BACK BOTTOM
SECTION. LEE STRAP (6 EA). TOWEL BAR ASSY
(3 EA). BERTH LIGHT (3 EA). MAGAZINE RACK
(3 EA). CURTAIN TRACK (4 EA): ONE CURTAIN
TRACK SHALL BE INSTALLED ON BACK
BOTTOM SECTION. BERTH CURTAIN (4 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. ONE BERTH
CURTAIN SHALL BE INSTALLED BACK
BOTTOM SECTION. (12) FAN RECESS (3 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. FOR SUBBASE:
DWG; 804-5959312 REV.C DETAIL 75-D, SIZE; 29-
3/4"(W) X 79-1/4"(L) X 2-1/2" (H), MATL; STEEL,
REMARKS; SUBBASE SHALL NOT BE POWDER
COATED AND SHALL BE PRESERVED BY ONE
COAT OF EPOXY MIL-DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE,FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
NOT BE INSTALLED. BACK INSERT PANEL (2
EA): BOTTOM BACK INSERT PANEL SHALL
NOT BE INSTALLED. LEE STRAP (6 EA). TOWEL
BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FAN RECESS (3 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.OR
EQUAL (FROM PROVIDED OEMs)
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE,FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
NOT BE INSTALLED. BACK INSERT PANEL (2
EA): BOTTOM BACK INSERT PANEL SHALL
NOT BE INSTALLED. LEE STRAP (6 EA). TOWEL
BAR ASSY (3 EA). BERTH LIGHT (3 EA).
MAGAZINE RACK (3 EA). CURTAIN TRACK (3
EA). BERTH CURTAIN (3 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FAN RECESS (3 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. FOR SUBBASE: DWG; 804-
5959312 REV.C DETAIL 75-D, SIZE; 29-3/4"(W) X
79-1/4"(L) X 2-1/2" (H), MATL; STEEL, REMARKS;
SUBBASE SHALL NOT BE POWDER COATED
AND SHALL BE PRESERVED BY ONE COAT OF
EPOXY MIL-DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-3 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 23" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
BERTH, MODULAR, CPO, LHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, LEFT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL, FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-3 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 23" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
NOT BE INSTALLED. BACK INSERT PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FAN
RECESS (3 EA), SPEC: MIL-C-24500 TYPE I,
MATL: ORGANIC FIBER, COLOR: ROYAL BLUE.
FOR SUBBASE: DWG; 804-5959312 REV.C
DETAIL 75-D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1
/2" (H), MATL; STEEL, REMARKS; SUBBASE
SHALL NOT BE POWDER COATED AND SHALL
BE PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.OR EQUAL (FROM
PROVIDED OEMs)
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(5 EA): LEFT BOTTOM INSERT PANEL SHALL
NOT BE INSTALLED. BACK INSERT PANEL (3
EA). LEE STRAP (6 EA). TOWEL BAR ASSY (3
EA). BERTH LIGHT (3 EA). MAGAZINE RACK (3
EA). CURTAIN TRACK (3 EA). BERTH CURTAIN
(3 EA), SPEC: MIL-C-24500 TYPE I, MATL:
ORGANIC FIBER, COLOR: ROYAL BLUE. FAN
RECESS (3 EA), SPEC: MIL-C-24500 TYPE I,
MATL: ORGANIC FIBER, COLOR: ROYAL BLUE.
FOR SUBBASE: DWG; 804-5959312 REV.C
DETAIL 75-D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1
/2" (H), MATL; STEEL, REMARKS; SUBBASE
SHALL NOT BE POWDER COATED AND SHALL
BE PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-3 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 23" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK INSERT PANEL (3 EA). LEE STRAP
(6 EA). TOWEL BAR ASSY (3 EA). BERTH LIGHT
(3 EA). MAGAZINE RACK (3 EA). CURTAIN
TRACK (3 EA). BERTH CURTAIN (3 EA), SPEC:
MIL-C-24500 TYPE I, MATL: ORGANIC FIBER,
COLOR: ROYAL BLUE. FAN RECESS (3 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. FOR SUBBASE:
DWG; 804-5959312 REV.C DETAIL 75-D, SIZE; 29-
3/4"(W) X 79-1/4"(L) X 2-1/2" (H), MATL; STEEL,
REMARKS; SUBBASE SHALL NOT BE POWDER
COATED AND SHALL BE PRESERVED BY ONE
COAT OF EPOXY MIL-DTL-24441/MIL-PRF-
23236OR EQUAL (FROM PROVIDED OEMs)
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, WITHOUT KICK-OUT
PANEL,FOR BERTH: DWG; 804-5959312 REV.C
DETAIL 22-D TYPE-XII STYLE-3 SIZE-4,SIZE; 29-
3/4"(W) X 79-1/4"(L), 23" VERTICAL SPACING,
MATL; ALUMINUM,FINISH; EPOXY POWDER
COATING, SAE AMS-STD-595 CODE: 26586
(SEMI-GLOSS), REMARKS; INSTALL BELOW
ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK INSERT PANEL (3 EA). LEE STRAP
(6 EA). TOWEL BAR ASSY (3 EA). BERTH LIGHT
(3 EA). MAGAZINE RACK (3 EA). CURTAIN
TRACK (3 EA). BERTH CURTAIN (3 EA), SPEC:
MIL-C-24500 TYPE I, MATL: ORGANIC FIBER,
COLOR: ROYAL BLUE. FAN RECESS (3 EA),
SPEC: MIL-C-24500 TYPE I, MATL: ORGANIC
FIBER, COLOR: ROYAL BLUE. FOR SUBBASE:
DWG; 804-5959312 REV.C DETAIL 75-D, SIZE; 29-
3/4"(W) X 79-1/4"(L) X 2-1/2" (H), MATL; STEEL,
REMARKS; SUBBASE SHALL NOT BE POWDER
COATED AND SHALL BE PRESERVED BY ONE
COAT OF EPOXY MIL-DTL-24441/MIL-PRF-23236
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK INSERT PANEL (2 EA): BOTTOM
BACK INSERT PANEL SHALL NOT BE
INSTALLED. CROSS BRACE ASSEMBLY SHALL
BE INSTALLED ON BACK BOTTOM SECTION.
LEE STRAP (6 EA). TOWEL BAR ASSY (3 EA).
BERTH LIGHT (3 EA). MAGAZINE RACK (3 EA).
CURTAIN TRACK (4 EA): ONE CURTAIN TRACK
BERTH, MODULAR, CPO, RHLIGHTWEIGHT
MODULAR BERTH, CPO, 0 LOCKERS, RIGHT-
HAND, WITH SUBBASE, FOR BERTH: DWG; 804-
5959312 REV.C DETAIL 22-D TYPE-XII STYLE-3
SIZE-4,SIZE; 29-3/4"(W) X 79-1/4"(L), 23"
VERTICAL SPACING, MATL; ALUMINUM,
FINISH; EPOXY POWDER COATING, SAE AMS-
STD-595 CODE: 26586 (SEMI-GLOSS),INSTALL
BELOW ITEMS. SFC B-2B-4 EEBD STOWAGE
CONTAINER (3EA), STD DWG 804-5751208. FAN
UNIT ASSY (3 EA). FOOT/HEAD INSERT PANEL
(6 EA). BACK INSERT PANEL (2 EA): BOTTOM
BACK INSERT PANEL SHALL NOT BE
INSTALLED. CROSS BRACE ASSEMBLY SHALL
BE INSTALLED ON BACK BOTTOM SECTION.
LEE STRAP (6 EA). TOWEL BAR ASSY (3 EA).
BERTH LIGHT (3 EA). MAGAZINE RACK (3 EA).
SHALL BE INSTALLED ON BACK BOTTOM
SECTION. BERTH CURTAIN (4 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. ONE BERTH CURTAIN SHALL BE
INSTALLED BACK BOTTOM SECTION. FAN
RECESS (3 EA), SPEC: MIL-C-24500 TYPE I,
MATL: ORGANIC FIBER, COLOR: ROYAL BLUE.
FOR SUBBASE: DWG; 804-5959312 REV.C
DETAIL 75-D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1
/2" (H), MATL; STEEL, REMARKS; (1) SUBBASE
SHALL NOT BE POWDER COATED AND SHALL
BE PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.OR EQUAL (FROM
PROVIDED OEMs)
CURTAIN TRACK (4 EA): ONE CURTAIN TRACK
SHALL BE INSTALLED ON BACK BOTTOM
SECTION. BERTH CURTAIN (4 EA), SPEC: MIL-C-
24500 TYPE I, MATL: ORGANIC FIBER, COLOR:
ROYAL BLUE. ONE BERTH CURTAIN SHALL BE
INSTALLED BACK BOTTOM SECTION. FAN
RECESS (3 EA), SPEC: MIL-C-24500 TYPE I,
MATL: ORGANIC FIBER, COLOR: ROYAL BLUE.
FOR SUBBASE: DWG; 804-5959312 REV.C
DETAIL 75-D, SIZE; 29-3/4"(W) X 79-1/4"(L) X 2-1
/2" (H), MATL; STEEL, REMARKS; (1) SUBBASE
SHALL NOT BE POWDER COATED AND SHALL
BE PRESERVED BY ONE COAT OF EPOXY MIL-
DTL-24441/MILPRF-23236.
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH SUB-BASE,
DWG: 804-1623970 & S3306-921770, SIZE: 24" W X
19" D X 75" H, MATL: ALUMINUM & CRES, SUB-
BASE MATL: CRES, FINISH 4, NO COATING,
WARDROBE COLOR: SAE-AMS-STD-595, #26586
(SEMI-GROSS),POWDER COATING: MIL-PRF-
24712 REV B, TYPE I (EPOXY RESIN, WITHOUT
ZINC), CLASS 4 (INTERIOR DRY SERVICE, WET
SERVICE, SINGLE-COAT PRODUCT),
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY, UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
INFORMATION FROM TO
Description
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,OR EQUAL
(FROM PROVIDED OEMs)
LAVATORY UNITLAVATORY UNIT FOR
OFFICERS STATEROOM, WITH LIGHT AND SUB-
BASE,DWG: 804-1623970 & S3306-921770, SIZE:
24" W X 19" D X 75" H, MATL: ALUMINUM &
CRES, SUB-BASE MATL: CRES, FINISH 4, NO
COATING, WARDROBE COLOR: SAE-AMS-STD-
595, #26586 (SEMI-GROSS), POWDER COATING:
MIL-PRF-24712, TYPE I, CLASS 1,
Manufacturer's Name *Please see Section A (Instructions to Offerors) for complete list of applicable OEMs*
Section C - Description/Specifications/Statement of Work
The Requirements text has been modified to:
Procurement of Standard Beds, Box Springs, Mattresses and Headboards; for SRF-JRMC Yokosuka
Section D - Packaging and Marking
The following clauses were added:
Additional Regulation or Supplemental Clauses Incorporated by Full Text
Number Title Effective Date Alternate/ Deviation
Variation Effective Date
FLCPS SRF 007 FLCPS_SRF_DELIVERY (Aug 2025)
PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
(a) shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The Preservation, packaging, and packing unit pack quantity that applies to items under this contract is "Industry Standard".
(b) The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, Prohibited Packing Materials.
computer paper and similar hydroscopic or non-neutral material) is prohibited.
(c) All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum Non-Manufactured Wood Packing.
core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to https://www.aphis.usda.gov/aphis/ourfocus/planthealth/import-information/wood-packaging-material for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.
(d) , such as particleboard and plywood, are exempt from this requirement.Manufactured wood
(e) Packing must be sufficient to ensure safe delivery to the final destination without the need for additional repackaging or repair.
(f) All materials shall be packed to withstand multiple modes of transport (truck, rail, sea, or air) and handling by forklifts or cranes.
(g) Heavy items must be crated or skid-mounted to distribute weight evenly and ensure lifting point are accessible and marked.
(h) Packages must be stable, not exceed safe stacking limits, and be secured against movement in transit.
MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)
(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.
(ii) All unit and exterior containers/packs shall, as a minimum, be marked as follows:
1. National stock number (NSN), when available, or Federal stock number (FSN), when NSN is not available, or part number when neither NSN or FSN are available.
2. Noun nomenclature cited on contract or order.
3. Quantity and unit of issue.
4. Contract, or order number.
5. From:_______________________________________________ (Contractor's Name) (Address)
6. To: (See delivery address on page 3-4 or in Section F)
(iii) Markings may be applied by any means which provide legibility.
The following clauses were deleted:
Other Clauses
Number Title Effective Date Alternate/ Deviation
Variation Effective Date
FLCPS SRF 007 FLCPS_SRF_DELIVERY (Aug 2025)
PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
(a) shall be in accordance with ASTM-D-3951…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .