01-448-2076_04-19-2021.pdf

FCL

01/11/99

D REDRAWN & ADDED -2 01/02/02 DPB/FCL

ZONE REV DESCRIPTION

REVISIONS

DATE APPROVED

ARE IN INCHES

SPECIFIED DIMS

UNLESS OTHERWISE

USED ON

APPLICATION

NEXT ASSEMBLY

REVSIZE

DATE

DATE

DATE

DATEAPPROVED BY

GOV'T APVD BY

CHECKED BY

DRAWN BY

DATE:

CONTRACT NUMBER

SHEET:WEIGHT:SCALE:

CAGE CODE DWG NO.

GLEN RIDDLE, PENNSYLVANIACORPORATION

CONTAINER RESEARCH

B 05259

TOLERANCES ON:

.01 - .03RBREAK EDGES:

-.001 +.007

±.010 ±.015

HOLE SIZES:

BEND R .00 TO .09:

.091 AND ABOVE:

FRACTIONS: 1/16

ANGLES: 1°

DECIMALS:

.XX

.XXX

.X ±

.1

.06

.015

"DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED"

FCL

JNB

STD-147 D

LOCATING PIN

CAGE

CODE

QTY

REQ'D

PART NO.

IDENTIFY NUMBER

DATA: SPECIFICATION

NOTES, VENDORSNO.

ITEM

LENGTH

OD/ID

WIDTH

GAUGE

THICK

MATERIAL

NOMENCLATURE

OR DESCRIPTION

PARTS LIST

CAD MAINTAINED, CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

SEE NOTES 1 & 22.0.50 DIAASTM A108LOCATING PINSTD-147-11

SEE NOTE 12.0.50 DIA304 SSLOCATING PINSTD-147-22

.43

.382X

1.00

FLAT SURFACE

2 SIDES

.25

2.00

.375-16 UNC-2A

.50O STK

15°

NOTES:

1. RECOMMENDED HARDWARE TO BE ONE (1)

.38 PLAIN WASHER & ONE (1) .375-16 NUT-FLEXLOC.

2. CAD PLATE PER AMS-QQ-P-416, TYPE II, CLASS .

MIN. THREAD RELIEF REQUIRED

CAD MAINTAINED, CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

STD-224-1 UPPER EXTRUSION ALUM 6063-T52 SEE NOTE 3

STD-224 T

SEALING FLANGE

EXTRUSION

FCL

BBV

JNB

05/22/98

IDENTIFY NUMBER

PART NO.QTY

REQ'D NO.

ITEM FSCM

NO. OR DESCRIPTION

NOMENCLATURE

MATERIAL

GAUGE

THICK

OD/ID

WIDTH

LENGTH

NOTES, VENDORS

DATA: SPECIFICATION

PARTS LIST

T REDRAWN & UPDATED ON SOLID EDGE DB/FCL07/31/02

DATEDESCRIPTIONREVZONE APPROVED

REVISIONS

DATE:

DRAWN BY

CHECKED BY

APPROVED BY

GOV'T APVD BY DATE

DATE

DATE

DATE

CONTRACT NUMBER

WEIGHT:SCALE:

SIZE

D

CODE IDENT NO.

05259

DWG NO. REV

SHEET:

GLEN RIDDLE, PENNSYLVANIACORPORATION

CONTAINER RESEARCH

SPECIFIED DIMENSIONS

UNLESS OTHERWISE

ARE IN INCHES

NEXT ASSEMBLY USED ON

APPLICATION

"DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED"

D

1345678

12345678

A

B

C

D

C

B

A

STD-224-2 LOWER EXTRUSION ALUM 6063-T5 SEE NOTE 3

STD-224-3 LOWER EXTRUSION ALUM 6063-T5 SEE NOTE 3

STANDARD ALUM

ASSOC TOL. APPLY

PER ANSI H35.2,

UNLESS OTHERWISE

SPECIFIED

.125

.135

.125

.406

.89

1.90

2.09

1.03 .25

R .38

FULL RADIUS

1.281

2.21

R .265 30°

15°

DETAIL A

2:1

.265

.530

.38

.645

.225

.450

R .09

R .2652X

3.22

.56.671

1.38

2.11 .515FULL RADIUS

FULL RADIUS

.250

135°

15°2X

NOTES:

1. ALL EDGES AND CORNERS TO BE BROKEN BY A .053 R,

UNLESS OTHERWISE SPECIFIED.

2. IDENTIFY IN ACCORDANCE WITH MIL-STD-130.

3. BOTH ALUM ALLOYS 6063-T5 & 6063-T52 SHALL CONFORM

TO ASTM B221.

4. ESTIMATED WEIGHT FOR ITEM 1 = 2.29 LBS/FT.

ESTIMATED WEIGHT FOR ITEM 2 = 1.56 LBS/FT.

ESTIMATED WEIGHT FOR ITEM 3 = 1.77 LBS/FT.

.53

FULL RADIUS

.78

R .12

.125

1.40

.135

.125

R .38.28

.25 .156

.47

2.76

1.94

.56

.53

.31

1.76

.12

FULL RADIUS

R .12

.12 105°2X

35°

.78

35°

FULL RADIUS

R .12.84

.25

2.50

R .12 .56

105°2X

.31

.53

.125

1.40

1.76 R .38

.47

.135

.125

.12

FULL RADIUS

2.76 .156

.12

1.09

.75

A

ISOMETRIC VIEW -3

ISOMETRIC VIEW -2 ISOMETRIC VIEW -1

8 7

A

B

C

D

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED"

"DISTRIBUTION STATEMENT A

CAD MAINTAINED, CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

ADHESIVE, ARMSTRONG CORK CO.

ITEM 6 WAS #D-218

JBS

KA1

3M

SEE NOTES 2&8

SEE NOTES 2&8

SEE NOTE 8

SEE NOTE 1

AL 5052-H38

AL 5052-H38

NEOPRENE/MIL-PRF-6855

REQUEST

UPDATED PER CUSTOMER

FCL

JA2

H

ADDED NOTE 2. 4

FCLB2

D4 .12D FOR LANYARD USE FCL

CORRECTED LOCATION OF

G

.25

.25

.12 DIA THRU

.25

.25

2.86

(1.46)

12.68

11.74

1.46 2.86

11.740

12.68

2.13 2.70

10.68

10.50

.XXX±.030

.XX ± .06

FCL

FCL

JNB

AVDEL CORP.

CARR LANE

CARR LANE

CAMLOC

CAMLOC

CAMLOC

CAMLOC

8.00.06 D

11.12 12.68 12.03 15.50

2.86 2.86 10.50 14.53

.187

.125

.090

.090

SS

AL 6061-T6

19738 99862 99862

71286 71286 71286 71286 76381

RIVET1693-0410

FERRULECL-4-F

LANYARDCL-2-C

RET. RINGR4T102

GROMMET40G1-1192

RECEPTACLE244-16B-R82

STUD4002-14-W72

ADHESIVE13576AR

GASKETSTD-225-551

PLATESTD-225-441

BRACKETSTD-225-331

HOUSINGSTD-225-221

ASSEMBLYSTD-225-11

.38 R. TYP

.09

2 PL

.09

.62±.01

.12 .187

4 PLS

.132

.138

DIA THRU.50

1.15

1.00±.01

12.12

7 8 9 10

12.03

.78 TYP

.47

SCALE 2/1

SECTION A-A

.010 REF

.625 REF

32 PL

.09

A

A

+.010

-.000

.625 DIA X 140° CSK, TYP

.625 DIA X .010 DP C'BORE

.500 DIA THRU .12 DIA THRU

.47

ZONE LTR DESCRIPTION DATE APPROVED

REVISIONS

6 5 4 3 2 1

D

C

B

A

123456

CONTAINER RESEARCH

GLEN RIDDLE,PENNSLYVANIA

CORPORATION

CONTAINER RESEARCH

D

CODE IDENT NO.

PARTS LIST

SIZEMATERIAL

GUAGE OD/ID

THICK WIDTH

ZONE

NOTES,VENDOR

DATA:SPECIFICATIONLG

DRAWING NO.SIZE

SCALE:

CONTRACT NO.

DATE

DR BY

CHK BY

APPD

APPD

APPD

FRACTIONS DECIMALS ANGLES

TOLERANCES ON:

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

APPLICATION

NEXT ASS'Y USED ON

MATERIAL

OR DESCRIPTION

NOMENCLATURE

IDENTIFYING NUMBER

PART OR

IDENT

CODE

FIND NO.

ITEM OR

REQ'D

QTY

WT. SHEET

LOG COMPARTMENT

(ALUM FLAT)

STD-225 K

1/2

01/11/99

05259

2X

2X

2 PLS

4 PLS

2 PLS

2 PLS

2 PLS

ROTATED 90 CWv

TO ASTM B-209.

BOTH ALUMINUM ALLOYS 6061-T6 & 5052-H38 SHALL CONFORM8.

ALTERNATE MATERIAL: 6061-T6 CONFORMING TO ASTM B-209.2.

APPLY ITEM 5 TO ITEM 4 WITH ITEM 6.1.

3. WELDING

WELDING AND WELD INSPECTION SHALL BE IN ACCORDANCE

WITH MIL-W-22248, CLASS 4, EXCEPT THAT:

(1) VISUAL INSPECTION SHALL INCLUDE 5X (5 POWER)

MAGNIFICATION WHEN A SUSPECT CONDITION IS TO BE

EXAMINED BEYOND THE CAPABILITY OF NORMAL VISION.

(2) CRITICAL AND MAJOR WELDS MAY BE SUBJECTED TO

FURTHER NON-DESTRUCTIVE TESTING (SUCH AS DYE

PENETRANT INSPECTION) AS PRESCRIBED BY THE BUYING

ACTIVITY.

PROPER CONTROLS SHALL BE USED TO PREVENT MELT THROUGH

OR BURN THROUGH. WELDER QUALIFICATION SHALL BE TO

AWS D17.1. FILLER FOR WELDING 6061 ALLOY SHALL BE

4043. FILLER FOR WELDING 5052 ALLOY SHALL BE 5356.

4. CLEANING

PARTS TO BE WELDED SHALL BE CHEMICALLY CLEANED TO

REMOVE SURFACE SOILS SUCH AS OILS, WAXES, GREASE, INKS,

ETC, PER MIL-DTL-5541, EXCEPT THAT UNINHIBITED ALKALINE SOLUTIONS

SHALL NOT BE USED.

5. DEOXIDIZING

THE CLEANED PARTS SHALL BE CHEMICALLY DEOXIDIZED NO

MORE THEN 10 DAYS PRIOR TO WELDING TO REMOVE THICK

SURFACE OXIDE FILMS. (IF THE MATERIAL OR WORK IS EXPOSED

TO AN OUTDOOR ENVIRONMENT, THIS TIME LIMIT SHALL BE

REDUCED TO A MAXIMUM OF 3 DAYS, TO ACCOUNT FOR

ATMOSPHERIC EFFECTS). MECHANICAL CLEANING METHODS SHALL

BE APPLIED JUST PRIOR TO THE ACTUAL START OF WELDING,

TO REMOVE ANY REOXIDATION OR RESIDUAL THIN OXIDE FILMS.

6. CHEMICAL TREATMENT

AN ACID DEOXIDIZING TREATMENT SHALL BE APPLIED BY EITHER

IMMERSION OR BRUSHING/WIPING. DEOXIDIZERS ACCEPTABLE FOR

USE SHALL INCLUDE NITRIC ACID, SULFURIC CHROMIC, PHOSPHORIC

CHROMIC, OR EQUIVALENT SOLUTIONS. SODIUM HYDROXIDE SOLUTIONS

SHALL NOT BE USED. CARE SHALL BE TAKEN TO ASSURE 100

SOLUTION COVERAGE OF THE AREA TO BE WELDED. TO ALLOW

AN ADEQUATELY SIZED DEOXIDIZED AREA FOR GOOD WELDING,

THE SOLUTION SHALL BE APPLIED TO AN AREA EXTENDING AT

LEAST 2 INCHES FROM THE WELD SITE, OR ENDING AT ANY

CLOSER ADJACENT EDGE.

7. MECHANICAL MEANS

IMMEDIATELY PRIOR TO WELDING, MECHANICAL CLEANING METHODS

SHALL BE APPLIED TO THE WELD AREAS PREVIOUSLY CHEMICALLY

TREATED TO ASSURE REMOVAL OF RESIDUAL OR REFORMED OXIDES,

IF ANY. ACCEPTABLE METHODS OF MECHANICAL CLEANING INCLUDE

STAINLESS STEEL WIRE BRUSHING, SCRAPING, FILING, OR SANDING.

HOWEVER, ABRASIVES CONTAINING IRON AND ITS OXIDES, STEEL

WOOL AND WIRE, AND COPPER ALLOY BASE WIRE, WHICH MAY

BECOME EMBEDDED WITH GALVANICALLY ACTIVE METALS AND

ACCELERATE CORROSION OF ALUMINUM ALLOYS, SHALL NOT BE

USED. MECHANICAL METHODS SHALL BE VIGOROUS ENOUGH TO

ADEQUATELY REMOVE ANY RESIDUAL OXIDE FILMS, BUT GENTLE

ENOUGH TO AVOID FORMING AN EXCESSIVELY ROUGH SURFACE IN

THE COMPARATIVELY SOFT METAL UNDERNEATH.

NOTES:

02/09

02/09

A 1. UPDATED NOTE 2 9/28/09 FCL

ZONE REV DESCRIPTION

REVISIONS

DATE APPROVED

IG 02/09

FCL 02/09

15930 C

CONTAINER

NAMEPLATE

CAGE

CODE

QTY

REQ'D

PART NO.

IDENTIFY NUMBER

DATA: SPECIFICATION

NOTES, VENDORSNO.

ITEM

LENGTH

OD/ID

WIDTH

GAUGE

THICK

MATERIAL

NOMENCLATURE

OR DESCRIPTION

PARTS LIST

OF1

2/12/09

ARE IN INCHES

SPECIFIED DIMS

UNLESS OTHERWISE

USED ON

APPLICATION

NEXT ASSEMBLY

REVSIZE

DATE

DATE

DATE

DATEAPPROVED BY

QC APPROVED BY

CHECKED BY

DRAWN BY

DATE:

CONTRACT NUMBER

SHEET:WEIGHT:SCALE:

CAGE CODE DWG NO.

PHILADELPHIA,PA700 ROBBINS AVE.

NAVAL INVENTORY CONTROL POINT

B 80132

TOLERANCES ON:

.01 - .03RBREAK EDGES:

-.001 +.007

±.010 ±.015

HOLE SIZES:

BEND R .00 TO .09:

.091 AND ABOVE:

FRACTIONS: 1/16

ANGLES: 2°

DECIMALS:

.XX

.XXX

.X ±

.1

.06

.015

JVD

RWC

B 1. REVISED NOTE 5, ADDED NOTE 8 10/30/09 FCL

C 1. DESIGN P/N WAS MFR P/N 4/10/17 FCL

2. MFR/CAGE WAS MFR

1 15930 NAMEPLATE NOTE 2 .012 4.00 4.00

CAD MAINTAINED, CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

NOTES:

1. CHARACTERS TO BE GOTHIC BOLD. LOCATE TEXT APPROXIMATELY AS SHOWN. TEXT

SIZE TO BE APPROXIMATELY AS SHOWN.

2. MATERIAL: .012 (.03MM) MINIMUM THICKNESS, PHOTOSENSITIVE, ANODIZED

ALUMINUM PLATE, HIGH STRENGTH ADHESIVE BACKED. RIVETS WILL BE USED TO

SECURE THE NAMEPLATE AND WILL BE SEALED ACCORDINGLY IF THE PRESSURE

BOUNDARY IS PENETRATED.

3. CHARACTERS AND DATA MATRIX TO BE BLACK ON A NATURAL BACKGROUND.

4. REFERENCE SPECIFICATION MIL-DTL-15024, TYPE H, STYLE IV.

5. CONTACT NAVSUP CODE N241.10 FOR ASSIGNMENT OF SERIAL NUMBER(S).

6. DATA MATRIX ECC 200 SYMBOL USING ISO 15434 SYNTAX AND THE SEMANTICS OF ISO

15418. SUBSTITUTE “R

S” SYMBOL WITH ASCII CODE 30, “G

S” SYMBOL WITH ASCII CODE

29, AND “E

OT” WITH ASCII CODE 4. EXACT CONTENTS OF MATRIX TO BE THE

FOLLOWING, ALL AS ONE CONTINUOUS STRING, WITHOUT SPACES:

[)>R

S06G S17V(vendor cage)G

S1P(container p/n)G SS [(program acronym)-SERIAL NO.]R

S E

OT

EXAMPLE, FOR SERIAL NUMBER 0001:

[)>R

S06G S17V80132G

S1P779E001-1G

SSARS-0001R

S E

OT

7. FOR REFERNCE ONLY: INFORMATION IS BASED ON UII CONSTRUCT #2: CAGE CODE,

ORIGINAL PART NO., SERIAL NO., AND DATA IDENTIFIERS (FORMAT 06).

8. ANY VARIATION TO THE NAMEPLATE (I.E. SIZE, MOUNTING HOLE DIMENSION AND

LOCATION, OR NOMENCLATURE) SHALL BE APPROVED BY NAVICP.

O .2194X

4.00

4.00

.192X

3.622X

.192X 3.622X

.012 MIN.

NOTES 5 & 6

NOTE 5

R .194X

.1511X

"Distribution Statement D: Distribution authorized to the Department of Defense and U.S. DoD contractors only, vulnerability information, 11

October 2012, other requests shall be referred to Commanding Officer Naval Supply Weapon Systems Support Philadelphia Pennsylvania 19111

(Attn Code N241.10)"

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.)

or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.) as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

Destruction Note - Destroy by any method that will prevent disclosure of contents or reconstruction of the document.