SF30_N0025322R0037_A0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this modification is to update the SOW removing language requiring a brand name only and changing the term “Salient Characteristics” to “Specif ications". FAR Clause 52.209-1 Qualification Requirements (Feb 1995) is added.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Nov-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N0025322R0037

X 9B. DATED (SEE ITEM 11)

13-Oct-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Nov-2022

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: MICHAEL BEADLE

MICHAEL.BEADLE1@NAVY.MIL

610 DOWELL STREET BLDG 206

KEYPORT WA 98370

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0025322R0037

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(a) Definition: "Qualification requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

(Name) (Address)

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name Manufacturer's Name Source's Name Item Name Service Identification Test Number (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not in itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract.

This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate the contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interests, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(End of clause)

The following have been modified:

STATEMENT OF WORK

POLYURETHANE POTTING COMPOUND IN ACCORDANCE WITH SPECIFICATIONS.

PRODUCT MUST REMAIN FROZEN UNTIL READY FOR USE.

DELIVERY REQUIRED WITHIN 30 DAYS AFTER DATE OF ISSUANCE OF DELIVERY

ORDER. MUST BE DELIVERED IMMEDIATELY FROM RECEIVING DIRECTLY TO:

NAVAL UNDERSEA WARFARE CENTER DIV KEYPORT BLDG 81A FREEZER.

SHIPPING FOB NUWC KEYPORT

SHIPPING/TRACKING INFORMATION WILL BE PROVIDED TO TECHNICAL POC AS

SOON AS IT IS AVAILABLE.

MSDS# HDVDWD DATE 06/23/2015

IDIQ MAX: 720 TUBES

LLN041700

PR 1547 AMBER (MIXED & FROZEN)

POTTING COMPOUND

Specifications for Polyurethane Molding Compound These requirements are for a polyurethane molding material used for encapsulation of underwater cables. The material is to be used in support of the Submarine Tomahawk Weapon Control Cables (WCC) and Vertical Launch Systems (VLS).

The material must be:

- Qualified to NAVSEA Tech Manual S9320-AM-PRO-020/MLDG for Submarine Outboard Cables

- Qualified to MIL-M-24041, Category A, Type II, military specification for Polyurethane Molding and Potting Compound

- Supplied in Semco-type cartridges for pneumatic dispensing; material shall be pre-mixed and frozen;

Material shall have a minimum storage life of 30 days when stored at -40 degrees Fahrenheit;

viscosity after thawing shall not exceed 600 Poise Mechanical Properties:

- Material shall not exceed 2.5% volume shrinkage

- Color: Colorless to Clear Amber; Material must be optically clear to allow visual inspection through 2 Inches, minimum, of cured material

- Service temperature range from -70 to +300 degrees Fahrenheit

- Fungus Resistance (MIL-E-5272): Non-Nutrient

- Hardness: 80 +/-5 Shore A Durometer

- Tensile Strength: 2000 PSI, minimum

- Ultimate Elongation: 500%, minimum

- Tear Strength: 200 lbs/in (Die C), minimum

- Peel Strength (with recommended primer):

o Aluminum – 40 lbs/in (lin.)

o Cadmium – 40 lbs/in (lin.)

o Neoprene - 25 lbs/in (lin.)

Electrical Properties:

- Dielectric Strength: 250 Volts/mil, minimum

- Dielectric Constant:

o 1 KHz @ 77 deg F - 9 maximum o 1 MHz @ 77 deg F - 7 maximum

- Power Factor:

o 1 KHz @ 77 deg F - 0.07 maximum o 1 MHz @ 77 deg F - 0.09 maximum

(End of Summary of Changes)