N0025318Q0046_Test_Cables_Amend_3.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide correction on CLIN 0007's Draw ing Number (See Draw ing Notes and CLIN 7 description).

Solicitation w ill be extended until 21-June-2018.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-Jun-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0025318Q0046

X 9B. DATED (SEE ITEM 11)

09-May-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-Jun-2018

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: MELISSA REMIGIO

MELISSA.REMIGIO@NAVY.MIL

610 DOWELL ST BLDG 206

KEYPORT WA 98345-7610

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

melissa.remigio Highlight

N0025318Q0046

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

DRAWING NOTES

Vendor Questions and Answers:

1. Multiple items (for example item 4 on drawing 8290504) refer to cage code 3FWT8 (Compaero Manufacturing LLC). Can we instead use items manufactured by cage code 0G3R1 (Compaero Inc.)? Manufacturer 3FWT8 is unavailable and owner of 0G3R1 claims to manufacture the same products.

Answer: Agree that the cage for the Compaero division has changed to 0G3R1. Conferred with the sales division, they are the Compaero group/cage currently responsible for manufacturing connector and backshell components in the USA. You may use items manufactured by cage code 0G3R1, Compaero, INC.

2. Drawing 5223346 (listed on top of page 14 of solicitation) is not in the TDP? Please confirm.

Answer: Dwg. 5223346 is listed as a reference on Dwg. 8291822. The parts list has the correct part number with a valid cage for the vendor of the part; the reference is attached to the parts items 12, 13, and 14. The reference is useful mfg. info and must be on the drawing for historical tracking and future manufacturing, but should not be needed currently because ITT (vendor’s cage) has a part number for the item. Drawing 5223346 is currently listed and cited in the TDP (Technical Data Package or Drawing Notes found on each item description). Drawing number is highlighted on the page 14 for easy tracking.

3. Drawing 5333013 (listed on top of page 12 of solicitation) is not in the TDP?

Answer: Drawing 5333013 was a typo and correction was applied on page 12 of the solicitation document. It should reflect Dwg. 5223013. It is listed as a reference on Dwg. 8291030. The parts list has the correct part number with a valid cage for the vendor of the part; the reference is attached to the parts items 12, 13, and 14. The reference is useful mfg. info and must be on the drawing for historical tracking and future manufacturing, but should not be needed currently because ITT has a part number for the item. The TDP reflects Dwg. 5333013.

**Amendment 3**

4. Drawing 6116506 (listed on top of page 18 of solicitation) should be 6116505?

Answer: Yes. Drawing 6116506 was a typo. Correction is applied on the solicitation document.

Dwg. 6116506 should be Dwg. 6116505. It is listed on 8290507 in a reference concerning what the test cable is for.

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 11-Jun-2018 02:00 PM to 21-Jun-2018 02:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0007

The CLIN extended description has changed from:

MANUFACTURE IN ACCORDANCE WITH W101 TC9101-1 IN ACCORDANCE WITH DRAWING 8290507

REV. A, P/N 8290507A, ***61165065 V REFERENCE ONLY, NOT MANUFACTURED and all associated drawings. Material to be individually labeled as applicable:• Drawing Number• Contract Number• Vendor Cage Code• Quantity- Package and mark with best commercial practices to ensure no damage to the product.- Tracking information from vendor will be provided to Technical Point of Contact upon shipment.- Allow Inspection and Acceptance for 30days.SEE ATTACHED DRAWING NOTES:DRAWING

TITLE AND NOTES: 8291030_A TEST CABLE TC7-1 VLA MK 15 MOD 0/1 CANISTER 5223010_C

and NORS 8-11 (Reference Specification) 5223013_A (Reference Specification)8291031_A TEST CABLE

TC6-1, VLA CODE PLUG8291122_A TEST CABLE TC7-2 VLA, SELF-TEST F/ TC7-1 5223346_D

(Reference Specification) 5223012_C and NORS 12-15 (Reference Specification)8291123_A TEST CABLE TC6-2, VLA, SELFTEST FOR TC6-18290504_A TTA adapter cable TC9301-1 8290505_A TTA adapter cable TC9301-2 8290506_A AFS adapter Cable TC9102 8290507_A Payload adapter cable TC9101-1, ***6116505, Rev. V is provided for reference only8290508_A TDS adapter cable, TC9109, 8290811_A UMB ADAPTER CABLE TC9302-1 8290812_A UMB ADAPTER CABLE TC9302-2 8290827_B TEST CABLE, ((VLA PAYLOAD W101)), TC9101-2 8290828_NR 8290867_NR

8290868_NR 2132035_AK 1805732_AC (Reference) 1984632_J (Reference)Updated Specifications:QQ-N-290 is superseded by SAE-AMS-QQ-N-290MIL-C-14550 is S/S by SAE-AMS-2418MIL-L- 8937 is S/S by MIL-L-4601OBQQ-A-225 is S/S by SAE-AMS-QQ-A-225MIL-I-23011 superseded by SAE AMS- I-23011 QQ-P-416 superseded by SAE AMS-QQ-P-416QQ-C-530 is S/S by ASTM-B196, ASTM-B197, and ASTM-B194

To:

MANUFACTURE IN ACCORDANCE WITH W101 TC9101-1 IN ACCORDANCE WITH DRAWING 8290507

REV. A, P/N 8290507A, *** 6116505 V REFERENCE ONLY, NOT MANUFACTURED and all associated drawings. Material to be individually labeled as applicable:• Drawing Number• Contract Number• Vendor Cage Code• Quantity- Package and mark with best commercial practices to ensure no damage to the product.- Tracking information from vendor will be provided to Technical Point of Contact upon shipment.- Allow Inspection and Acceptance for 30days.SEE ATTACHED DRAWING NOTES:DRAWING

TITLE AND NOTES: 8291030_A TEST CABLE TC7-1 VLA MK 15 MOD 0/1 CANISTER 5223010_C

and NORS 8-11 (Reference Specification) 5223013_A (Reference Specification)8291031_A TEST CABLE

TC6-1, VLA CODE PLUG8291122_A TEST CABLE TC7-2 VLA, SELF-TEST F/ TC7-1 5223346_D

(Reference Specification) 5223012_C and NORS 12-15 (Reference Specification)8291123_A TEST CABLE TC6-2, VLA, SELFTEST FOR TC6-18290504_A TTA adapter cable TC9301-1 8290505_A TTA adapter cable TC9301-2 8290506_A AFS adapter Cable TC9102 8290507_A Payload adapter cable TC9101-1, ***6116505, Rev. V is provided for reference only8290508_A TDS adapter cable, TC9109, 8290811_A UMB ADAPTER CABLE TC9302-1 8290812_A UMB ADAPTER CABLE TC9302-2 8290827_B TEST CABLE, ((VLA PAYLOAD W101)), TC9101-2 8290828_NR 8290867_NR

8290868_NR 2132035_AK 1805732_AC (Reference) 1984632_J (Reference)Updated Specifications:QQ-N-290 is superseded by SAE-AMS-QQ-N-290MIL-C-14550 is S/S by SAE-AMS-2418MIL-L- 8937 is S/S by MIL-L-4601OBQQ-A-225 is S/S by SAE-AMS-QQ-A-225MIL-I-23011 superseded by SAE AMS-melissa.remigio Highlight melissa.remigio Highlight melissa.remigio Highlight melissa.remigio Highlight

I-23011 QQ-P-416 superseded by SAE AMS-QQ-P-416QQ-C-530 is S/S by ASTM-B196, ASTM-B197, and ASTM-B194

(End of Summary of Changes)