N00253-14-T-0073_OFW_ALASKA.pdf

NAVAL UNDERSEA WARFARE CENTER

ATTN: GINA PINION@NAVY.MIL

610 DOWELL STREET, BLDG 206A

KEYPORT WA 98345

360-315-0433

UNDER DPAS (15 CFR 700)

11. DELIVERY FOR FOB

RFQ

SEE SCHEDULE

X

DO-S1

14. METHOD OF SOLICITATION

IFB RFP

CODE

SEE ADDENDUM

BLOCK IS MARKED

DESTINATION UNLESS

12. DISCOUNT TERMS

(No Collect Calls)

35500000

13b. RATING

13a. THIS CONTRACT IS A RATED ORDER

X

X

CODE

N00253-14-T-0073 29-Jan-2014

b. TELEPHONE NUMBER

360-315-0433

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 12 Feb 2014

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV 3/2005)

Prescribed by GSA

FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER) 31c. DATE SIGNED

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

22. UNIT 23. UNIT PRICE 24. AMOUNT21. QUANTITY

CODE 10. THIS ACQUISITION IS

UNRESTRICTED

FAX: NAICS:

TEL:

CODE 18a. PAYMENT WILL BE MADE BYOFFEROR

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TEL.

N00253

SIZE STD:

9. ISSUED BY

FACILITY

CODE

17a.CONTRACTOR/

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GINA A. PINION

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES

SEE SCHEDULE

562112

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

SB

HUBZONE SB

SET ASIDE: 100 % FOR

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

TEL: EMAIL:

1 COPIES

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

.OFFER DATED YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

X

8(A)

SVC-DISABLED VET-OWNED SB

EMERGING SB

X

X

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

SEE SCHEDULE

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES 21. QUANTITY 22. UNIT 24. AMOUNT

PAGE 2 OF

23. UNIT PRICE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV 3/2005) BACK

Prescribed by GSA

FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

N00253-14-T-0073

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Haz Waste Disposal-Liquid

FFP

One-time pickup, transportation, and disposal of up to 10 drums of liquid Otto Fuel Hazardous Waste in accordance with attached statement of work.

Provide pricing per drum:

$________ x 10 drums = Not to Exceed Amount $___________ The pricing for this CLIN is firm-fixed-price per drum, with a total Not to Exceed Amount for the maximum of 10 drums.

NET AMT

0002 1 Lot Haz Waste Disposal-Solid

FFP

One-time pickup, transportation, and disposal of up to 7 drums of Solid Otto Fuel Hazardous Waste in accordance with attached statement of work.

Provide pricing per drum:

$________ x 7 drums = Not to Exceed Amount $___________ The pricing for this CLIN is firm-fixed-price per drum, with a total Not to Exceed Amount for the maximum of 7 drums.

0003 1 Lot Haz Waste Disposal-Transportation

FFP

One-time pickup, transportation, and disposal of up to 17 drums of Otto Fuel Hazardous Waste in accordance with attached statement of work.

All transportation costs shall be included in this CLIN.

The pricing for this CLIN shall be firm-fixed-price.

STATEMENT OF WORK

Otto Fuel Waste Disposal Services – Prudhoe Bay, Alaska

1. DISPOSAL METHODS. Offerers are requested to submit offers for pickup, transportation, and disposal of up to seven 55-gallon drums of solid and up to ten 55-gallon drums of liquid Otto fuel waste generated at Deadhorse Airport ERA Hanger, 419 James Dalton Highway, Prudhoe Bay, Alaska 99734. Generator will be NUWC Newport, 1176 Howell Street, Bldg. 11, Code 551, HW Group, Newport, RI 02841. NUWC Newport employees will generate waste at the Prudhoe Bay, Alaska. Estimated pickup date is 01 April 2014. Pickup date is subject to change based on operation schedule changes and at short notice. Waste must be picked up on the day requested by Otto Fuel Disposal Coordinator.

Contractor shall prepare hazardous waste manifest. Please provide manifest to Naval Undersea Warfare Center, Newport, RI one week in advance for review prior to pick up. The EPA ID# assigned for the purpose of manifesting from this location is "EPA ID AKR000005629".

2. SHIPPING DESCRIPTION:

Solid Waste – up to 7 drums RQ, Waste Environmentally Hazardous Substances, solid. N.O.S. (Propylene Glycol Dinitrate, Otto Fuel II), 9, UN3077, PG III, (D003)

Liquid Waste – up to 10 drums RQ, Waste Flammable Liquids, Toxic, N.O.S. (Mineral Spirits, Cyanide Complex), 3, (6.1), UN1992, PG III (D001, D003)

3. CONTRACTOR QUALIFICATIONS. Prior to award of contract, the prospective contractor and sub-contractors are required to possess all permits and licenses in accordance with federal (EPA 40 CFR and DOT 49 CFR), and state and local regulations relating to the transport and disposal of hazardous waste.

4. DRUM PICKUP. Pickups shall be made during normal working hours (i.e. between the hours of 0730 and

1600). Pickup date is on or about 01 April 2014. Exact date will be scheduled with Otto Fuel Disposal coordinator point of contact.

5. TRUCK DRIVER RESPONSIBILITIES. Truck driver to be responsible for dunnage (blocking and bracing) of drums on trailer or freight container. Drums shall be stowed right side up. Contractor shall wear protective clothing during drum pickup. Moreover, truck driver shall exercise extreme caution while performing pickup (or handling) of the material and avoid all spills.

6. TRUCK REQUIREMENTS. Truck shall be Department of Transportation (DOT) approved.

7. HEALTH AND SAFETY. The contractor and subcontractors must perform all operations in a prudent, conscientious, safe, and professional manner. At a minimum, contractor’s personnel and equipment shall comply with applicable local, state, federal, and installation laws, safety regulations and procedures including all required training. The contractor shall ensure that all personnel involved in handling the material shall be trained for the level of expertise required for proper performance of task.

The truck driver transporting the material shall be knowledgeable of health and safety information pertaining to the material and its components. Three areas are deemed necessary for training of contractor’s personnel;

equipment operation, emergency spill response, and knowledge of the material’s safety and health data.

8. SPILL RESPONSIBILITY. In the event of a spill the contractor shall prepare an incident (spill) report occurring during contract performance. This includes but is not limited to identification of the substance spilled; location and date; quantity; personnel injury involved; clean-up procedures implemented; the names and telephone numbers of all state, federal, and Navy personnel contacted; and description of circumstances surrounding the spill incident. The report shall be forwarded to NAVUNSEAWARCENDIV Contracting administer (Code 1142, 610 Dowell Street, Keyport, WA 98345-5000) with copy to NAVUNSEAWARCENDIV Otto Fuel Waste ISEA (Code 424, 610 Dowell Street, Keyport, WA 98345-5000).

9. INSPECTION OF EQUIPMENT. Upon arrival at the activity, the Navy will inspect the contractor’s truck and other associated equipment for adequacy prior to its use. Any major deficiency found during inspection by the Navy (or other government agency) might be cause for refusal.

10. SHIPPING PAPERS. Upon completion of task, a copy of the fully executed shipping paper and certificate of disposal shall be submitted to the following:

Material Generator (original copy):

Naval Undersea Warfare Center 1176 Howell Street Bldg. 11, Code 551 Attn: HW Group Newport, RI 02841

Photo Copy:

NAVUNSEAWARCENDIV

610 Dowell Street Attention: Otto Fuel ISEA, Code 424 Keyport, WA 98345

WAGE DETERMINATION

WD 88-0162 (Rev.-10) was first posted on www.wdol.gov on 03/23/2010 Hazardous Waste Pickup/Disposal Services

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON, D.C. 20210

Shirley F. Ebbesen Division of Wage | Wage Determination No: 1988-0162 Director Determinations | Revision No: 10 | Date Of Revision: 03/12/2010 State: Alaska Area: Alaska Statewide

**Fringe Benefits Required Follow the Occupational Listing**

Employed on contract for removal of oil spills, hazardous waste materials, and related cleanup services.

OCCUPATION CODE - TITLE FOOTNOTE RATE

(not set) - Laborers-Group 1 (see 1) 29.99 (not set) - Laborers-Group 2 (see 1) 30.92 (not set) - Laborers-Group 3 (see 1)

a) Laborers- Group 3 31.75

b) General Foreman 33.44

d) Powder Foreman/Drill Foreman 37.40

c) Laborer Foreman 31.75 (not set) - Operating Engineers-Group 1A (see 2) 37.99 (not set) - Operating Engineers-Group 1 (see 2)

a) Operating Engineering Group 1 36.23

b) Apprentice - 1st Period 60% 0-1000 Hrs 21.74

c) Apprentice - 2nd Period 70% 1001-2000 Hrs 25.36

d) Apprentice - 3rd Period 80% 2001-3000 Hrs 28.98

e) Apprentice - 4th Period 85% 3001-4000 Hrs 30.80

e) Apprentice - 5th Period 90% 4001-5000 Hrs 32.61

f) Apprentice - 6th Period 95% 5001-6000 Hrs 34.42

g) Forman 39.49

h) General Foreman 40.99

i) Master Mechanic 40.99 (not set) - Operating Engineers-Group 2 (see 2) 35.46 (not set) - Operating Engineers-Group 3 (see 2) 34.74 (not set) - Operating Engineers-Group 4 (see 2) 28.53 (not set) - Truck Driver-Group 1A (see 3) 38.02 (not set) - Truck Driver-Group 1 (see 3) 36.78 (not set) - Truck Driver-Group 2 (see 3) 35.56 (not set) - Truck Driver-Group 3 (see 3) 34.76 (not set) - Truck Driver-Group 4 (see 3) 34.21 (not set) - Truck Driver-Group 5 (see 3) 33.46

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) Fringe benefits applicable to all classes of Laborers engaged in contrat performance equals $15.40 per hour per employee.

2) Fringe benefits applicable to all classes of Operating Engineers engagaed in contract performance equals $17.05 per hour per employee.

3) Fringe benefits applicable to all classes of truckdrivers engaged in contract performance equals $14.30 per hour per employee.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** NOTES APPLYING TO THIS WAGE DETERMINATION **

Under the policy and guidance contained in All Agency Memorandum No. 159, the Wage and Hour Division does not recognize, for section 4(c) purposes, prospective wage rates and fringe benefit provisions that are effective only upon such contingencies as "approval of Wage and Hour, issuance of a wage determination, incorporation of the wage determination in the contract, adjusting the contract price, etc." (The relevant CBA section) in the collective bargaining agreement between (the parties) contains contingency language that Wage and Hour does not recognize as reflecting "arm's length negotiation" under section 4(c) of the Act and 29 C.F.R. 5.11(a) of the regulations. This wage determination therefore reflects the actual CBA wage rates and fringe benefits paid under the predecessor contract.

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form 1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract.

{See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

** OCCUPATIONS NOT INCLUDED IN THE SCA DIRECTORY OF OCCUPATIONS **

Laborers-Group 1 Base and Floor Machineman; Brush Cutters; Buffing Machine Operator*; Camp Maintenance Laborers; Carpenters Tenders or Helper; Choke Setters; Coaters*;

Compactor; Crusher Plant Laborer; Demolition Laborers; Ditch Diggers; Dope Pot Fireman*; Dryerman; Dump Man; Fire Watch Laborer; Fire Watch (Certified);

Flagperson; Form Strippers; General Laborers; Grinder (not in preparation for welding)*; Guardrail Laborer; High Presser Water Operator; Hydro-Seeder Nozzle Operator; Building Laborers; Landscaper or Planter; Material Handlers, Hook Tenders; Monolithic Workers (sewer worker); Oil Spill Laborers; Paper Latchers*;

Pipe Cleaning*; Pit Man; Pneumatic or Power Tools; Portable or Chemical Toilet Servicer; Pre-heat for doping or cleaning; Pump Man or Mixer Man; Railroad Track Laborer; Sandblast, Pot Tender; Saw Tender; Scaffold Building and Erecting;

Signalman; Stake Hopper; Steam Point or Water Jet Operator; Steam Cleaning Operator; Swamp (including, but not limited to sidebooms, gin-pole trucks, winch trucks, forklifts, etc.)*; Tank Cleaning; Tapers*; Utiliwalk and Utilidor Laborer; Window Cleaner. *Pipeline classifications.

Laborers-Group 2 Asphalt Workers (shoveler, plant crew; tar rubber add $.25 per hour); Concrete Laborer (curb and gutter, chute handler, grouting, curing, screeding); Rigger;

Slurry Work.

Laborers-Group 3 Burning and Cutting Torch; Catalyst, Epoxy; Cement or Line Dumper of Handler (sack or bulk); Chainsaw Filer; Chainsaw Operator; Choker Splicer; Chunk Tender (wagon, air track, and hydraulic drills); Concrete Laborers (pore buggy, concrete saws, pumpcrete nozzleman, vibrator); Foam Gun or Foam Machine

Operator; Green Cutter (Dam Work); Guardrail Layout; Gunnite Operator;

Incinerator Operator; Insulator; Jackhammer or Pavement Breakers; Laser Instrument Operators; Mason Tender and Mud Mixer (sewer worker); Maintenance Man; Oil Spill Laborer (marine work); Powder Helper; Power Saw Operator;

Railroad Switch Layout Laborer; Road Crossing (casings)*; Sandblaster; Sewer Caulkers; Sewer Plant Maintenance Man; Sloper (over 20'); Thermal Plastic Applicator; Timber Faller; Timberman; VSM Drill Helper (changing teeth, etc.)*;

Water Blaster (Dam Work). *Pipeline classifications.

Operating Engineers-Group 1 Asphalt Roller; A-frame Trucks; Helicopter; Transporters; Deck Winches - Double Drum; Backfiller; Batch Plant Operator; Batch and Mixer over 200 yards; belcrete with power pack and similar; Bending Machine; Bulldozer; Cableway and Highline, all sizes; Cleaning Machine; Coating machine; Cranes; Shovels; Backhoes;

Draglines; Clam Shells; Crawler, truck type, floating locomotive, Whirley, either over or under three yards, or over or under 150 foot boom, including jib;

Hydralifts; Hyster Cat Cranes and attachments, side booms over and under 45 tons; Crusher; Derrick; Ditching/Trenching Machine (16" or over); Drilling Machines (Cove, Cable, Rotary and Exploration); Finishing Machine; Concrete Paving , Sidewalk, Curb and Gutter Machine; Hydro Ax and similar; Loaders - Elevator belt type, Euclid and similar types; Loaders - Forklifts with power boom and swing attachments, Overhead and /Front-end 2-1/2 yards and over; Loader with forks or pipe clamps, mechanics, welders, bodyman; Mixers - marble type with hoist combination; Motor Patrol Grader, over 14; Mucking Machines - mode, tunnel drill, and/or shield; Nodwell Sno Cat; Dredge Operator; Piledriver Engineer; L.B. Foster, Puller or similar Paving Basket; Power Plant, Turbine Operator, 300 K.W. and over (power plants or unites over 300 K.W. or quarry operations); Sauerman - Bagley; Scraper, Tournapull, Caterpillar, Euclid and similar type equipment over 25 yards; Shot Blast Machine; Spreader - Blaw knox, Cedarapids, Screed, Barber Green, Slurry Machine; Sub-grader (Gurriers, CMI and Roto Mills similar equipment types); Tack Tractor; Truck Mounted Concrete Pumps;

Water Kotc Machine; Hover Craft, Flex Craft, Loadmaster, Air Cushion, Terrain Vehicle; Cableways Rolligan; Dredge Barge - Cable, Highline or Cable Car; Camp Maintenance Engineer; Boat Coxswains; Tower Crane, Pecco; Loaders over four yards; Motor Patrol Grader (when finishing to final graders and/or to hubs, or for asphalt); Power Plants - 1000 K.W. and over; Quad; Slip Form Payer; C.M.I.

and similar types; Tournapulls, Caterpillar; Euclid scraper and similar type equipment over 40 yards.

Operating Engineers-Group 1A Camera/Tool/Video Operator (Slipline), Cranes-over 45 tons or 150 foot (including jib and attachments) (a) Shovels, backhoes, excavators with all attachments, draglines, clamshells-over 3 yards; (b) Tower Cranes; Licensed Water/Waste Water Treatment Operator; Loaders over 5 yards; certified Welder, Electrical Mechanic, Camp Maintenance Engineer, Mechanic (0ver 10,000 hours);

Motor Patrol Grader, Dozer, Grade Tractor (finish: when finishing to final grade and/or to hubs, or for asphalt; Power Plants: 1000 k.w. and over; Quad; Screed;

Sidebooms over 45 tons; Slip Form Paver, C.M.I. and similar types; Scrapers over 40 yards.

Operating Engineers-Group 2 Batch Plant Operators; Batch and Mixer 200 yards per hour and under; Boiler - Firemen; Cement Hog and Concrete Pump Operator 44 Compressors; Steel erection, including sandblasting, painting of same, Piledriving; Conveyors (except as listed in Group 1); Hoist on steel erection; Towermobiles and Air Tuggers;

Loaders, Elevating Grader, Dumore and similar; Locomotives; Rod and Geared Engines; Mixers; Screening Plant Service Oiler; Journeyman sideboom (cradding rock drill regardless of size); Skidder; Trenching Machine under 16".

Operating Engineers-Group 3 A" Frames Trucks; Deck Winches; Single Drum, Bombardier (tack or tow rig);

Boring Machine; Brooms, Power Wayne, Saginaw and similar types; Bump Cutter (Concut, Christenson or similar types); Compressors; Excavating; Drill Tender;

Farm Tractor; Fork Lift, Industrial Type; Gin Truck or Winch Truck (with poles when used or hoisting); Hoist, Air Tuggers, Elevators; Loaders (Elevating-Athey, Barber Green and similar types; Fork Lifts or Lumber Carrier, Fork Lifts with

Tower; Overhead/Front End, under 2-1/2); Locomotives (Dinkey) air, steam, gas and electric; Speeders; Mechanics - light duty; Mixer; Concrete Mixer and Batch 200 yards per hour and under; Oil, Blower Distributors; Pipeline Dream; Post Hole Diggers, Mechanical; Pot Fireman (power agitated); Power Plant, Turbine Operator, Under 300 K.W.; Pumps - Filler Kenyon, Water, Rig Oiler over 45 tons, over three yards, or over 150 feet boom; Rollers, Tampers, Vibrators, all except asphalt, saws, concrete; Straightening Machine; Tower Tractor.

Operating Engineers-Group 4 Rig Oiler (advances to Group 3 if over 45 tons or 3 yards or 150 feet boom);

Swamper (on trenching machines or shovel type equipment); Spotter; Steam Cleaner.

Truck Driver-Group 1 Semi with Double Box Mixer; Dump Trucks (including rock buggy and trucks with pups) over 40 yards up to and including 60 yards up to and including 60 yards;

Deltas, Commander, Rollagons, and similar equipment with pulling sleds, trailers, or similar equipment; Boat coxswains, Helicopter Transports; Lowboys including attached trailers and jeeps, twelve axles. (Over twelve axles or 150 tons to be negotiated.)

Truck Driver-Group 1A Dump Trucks, including rockbuggy and trucks with pups, over 60 yards up to and including 100 yards (over 100 yards to be negotiated); Jeeps (driver under load).

Truck Driver-Group 2 Turn-O-Wagon or DW-10, not self loading; All Delta's, Commanders, Rollagons, and similar equipment; Mechanics; Tireman; Dump Trucks (including rockbuggy to and trucks with pups) over 20 up to and including 40 yards.

Truck Driver-Group 3 Dump Truck including rockbuggy and trucks with pups over ten yards up to and including 20 yards; Lowboys including attached trailers and jeeps up to and including eleven axles; Oil Distributor Drivers; compactor (when pulled by rubber tired equipment); Water Wagon, when pulled by Euclid or similar type equipment; Partsman.

Truck Driver-Group 4 Buggymobile: Semi or Truck and Trailer; Dumpster; Batch Trucks over 5 yards;

Dump Trucks (including Rockbuggy and trucks with pups) up to and including 10 yards; Gin Pole Driver; Track Truck Equipment; Stringing Truck; Fuel Truck, Fuel Handler with Truck; Grease Truck; Flat Beds, Dual rear axle; Hyster Operators (handling bulk aggregate); Lumber Carriers; Water Wagon, Simi; Water Wagon, Dual Axle; Winch Truck, Wrecker, Flat Bed including "A" frame manufactured rating over 5 tons; Front End Loader with/forks; Bus Operators, over 30 passengers; All Terrain Vehicles; Boom Truck/Knuckle Truck over 5 tons; Foam Distributor Truck Dual Axle; Hydro Seeders-Dual Axle; Vacuum Truck, Truck Vacuum Sweepers-Dual Axle; Loadmanster (air and water operations); Air cushion or similar type vehicle; Fire Truck-Dual axle; Greasers; Rigger-non warehouse operations;

Expeditor.

Truck Driver-Group 5 Batch Truck, up to and including 7 yards; Boom Truck/Knuckle Truck up to and including 5 tons; Buffer Truck; Bull Lifts and Fork Lifts, Fork Lifts with Power Boom and Swing attachments, up to and including 5 tons; Bus Operators, up to 30 passengers; Farm type Rubber Tired Tractor (when material handling or pulling wagons on a construction project); Flat Beds, Single rear axle; Foam Distributor Truck Single axle; Fuel Handler (station/bulk attendant); Gear/Supply Truck; Gin Pole Truck, Winch Truck, wrecker, Truck Mounted "A" Frame manufactured rating 5 tons and under; Gravel Spreader Box Operator on Truck; Hydro Seeder - Single axle; Pickups (pilot cars and all light duty vehicles); Rigger/Swamper; Tack Truck; Team Drivers (Horses, Mules and similar equipment); Water Wagon (Below 250 Bbls).

LAB REPORT

SOLICITATION NOTES

1. Government Point of Contact for this Solicitation/Request for Quote (RFQ) is: Gina Pinion, Purchasing Agent, Phone: 360-315-0433, Email: gina.pinion@navy.mil. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Email questions to gina.pinion@navy.mil. Questions received after a reasonable time may not be entertained.

2. Utilize the pages in this solicitation to list all unit prices, extended prices, manufacturers, part numbers, countries of origin, and description changes (if any). Each Item No. or “CLIN” must be filled out. Company quote forms may be used, but not substituted for a completed solicitation/amendment pages. The government prefers submission of this RFQ by email or fax.

3. If you cannot meet the requested delivery date/Period of Performance (POP), line through and replace with your shortest lead time. All line items must state the unit price and extended price. Quote quantities as stated in this RFQ.

4. Military Specification (MILSPEC) can be accessed on line at: http://assistdocs.com and offer electronic copies.

5. Offerors shall supply Manufacturer and/or Service Provider’s information as requested in provision C.108.

Supply city/state if in the United States and/or the country of origin if outside the United States.

6. COMPLIANCE WITH SPECIFICATIONS: In order to ensure compliance with all the specification requirements, the contractor shall indicate in its offer and notify the Government in a cover letter, what specifications, if any, the offeror does not intend to meet. The offeror shall explain, in detail, how any proposed deviation/exception will nonetheless meet the Government's functional requirements. Should descriptive literature be supplied by the offeror, it will be presumed that the offeror intends to meet all of the specifications, regardless of the descriptive literature, unless the offeror specifically notes its exceptions. It shall be the obligation of the contractor to exercise due diligence to discover and to bring to the attention of the contracting officer at the earliest possible time, in writing, any ambiguities, discrepancies, inconsistencies, or conflicts in or between the specifications and the applicable drawings or other documents incorporated by reference herein. Failure to comply with such obligation shall be deemed a waiver and release of any and all claims for extra costs or delays arising out of such ambiguities, discrepancies, inconsistencies, and conflicts.

7. Failure to provide all required information from this solicitation and any subsequent amendment(s) may deem your company to be considered non-responsive.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 POP 16-MAR-2014 TO

15-APR-2014

N/A N/A

FOB: N/A

0002 POP 16-MAR-2014 TO

15-APR-2014

0003 POP 16-MAR-2014 TO

15-APR-2014

CLAUSES INCORPORATED BY REFERENCE

52.204-2 Security Requirements AUG 1996 52.204-7 System for Award Management JUL 2013 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance JUL 2013 52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

MAY 2011

52.211-15 Defense Priority And Allocation Requirements APR 2008 52.212-1 Instructions to Offerors--Commercial Items JUL 2013 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2013 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-0001 Line Item Specific: Single Funding SEP 2009 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A MAY 2013 252.204-7012 Safeguarding of unclassified controlled technical information NOV 2013 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.247-7023 Alt III Transportation of Supplies by Sea (JUN 2013) Alternate III MAY 2002

CLAUSES INCORPORATED BY FULL TEXT

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

Any contract awarded as a result of this solicitation will be a DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. [Contracting Officer check appropriate box.]

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2013)

ALTERNATE I (APR 2011)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (b) through (i) of this provision.

(a) Definitions. As used in this provision:

"Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Inverted domestic corporation, as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C.

395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874.

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Subsidiary means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned small business concern" means a small business concern—

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212- 3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------.

(Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any.)

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.

Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that--

(i) It ___ is, ___ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ballot] is, [ ___ ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ----------.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that--

(i) It [ ___ ballot] is, [ ___ ballot] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility;

and

(ii) It [ ___ ballot] is, [ ___ ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ----------.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. (Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.)

(i) (Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).) The offeror represents as part of its offer that it ( ) is, ( ) is not an emerging small business.

(ii) (Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).) Offeror represents as follows:

(A) Offeror's number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or

(B) Offeror's average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts).

(Check one of the following):

Average Annual

Number of Employees Gross Revenues

___ 50 or fewer ___ $1 million or less

___ 51 - 100 ___ $1,000,001 - $2 million

___ 101 - 250 ___ $2,000,001 - $3.5 million

___ 251 - 500 ___ $3,500,001 - $5 million

___ 501 - 750 ___ $5,000,001 - $10 million

___ 751 - 1,000 ___ $10,000,001 - $17 million

___ Over 1,000 ___ Over $17 million

(11) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.)

(i) General. The offeror represents that either--

(A) It ( ___ ) is, ( ___ ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the SAM Dynamic Small Business Search Database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or

(B) It ( ___ ) has, ( ___ )( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted.

(ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ___ .)

(12) Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(10) of this provision.)

(The offeror shall check the category in which its ownership falls):

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory of the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with…