1.02_SOW_FINAL.pdf

STATEMENT OF WORK (SOW)

PART I: GENERAL INFORMATION

A. INTRODUCTION

Organization: NCG 1 Mission: "Train, Equip, Deploy, and Employ" - Naval Construction Group ONE (NCG

1) prepares Pacific Fleet Naval Construction Force (NCF) units to conduct expeditionary and deliberate construction in support of Combatant Commanders and warfighter requirements. We do this through combat and construction training, equipment and maintenance training and logistical and mobilization support of our subordinate units.

NCG 1 exercises administrative control over the 1st, 9th, and 30th Naval Construction Regiments, Naval Mobile Construction Battalions (NMCBs) THREE, FOUR, and FIVE, as well as Construction Battalion Maintenance Unit 303, and Underwater Construction Team TWO. In all, NCG 1 includes 13 subordinate units and totals about 6,100 personnel.

B. BACKGROUND AND OBJECTIVES

Objective: The objective of this contract is to provide Hospital Corpsmen with the required knowledge and skills necessary to improve first responder care at the point of injury on the battlefield

1. Scope. NCG- 1 requires contracted support to provide twenty (20) Hospital Corpsmen with

Tactical Combat Casualty Care (TCCC) and Advanced Medical Training as required in order to meet pre-deployment, annual training and certification requirement s. Due to the sensitive nature of this type of training , NCG-1 requires externally sourced courses to meet this requirement. This Statement of Work addresses the instructional tasks required by NCG-1. Contractor will be required to work closely with NCG-1 personnel to ensure all training is being met sufficiently.

2. Peri od of Performance. Base: 20-25 April 2019, 0700-1600

Option: 16-20 September 2019, 0700-1600

3. Place of Performance. The primary place of performance will be at NBVC, Port Hueneme, California. Bldg. 1250, room 5.

4. Applicable Documents and References.

4.1 Vendor USDA Class R Research Facility Ce1tification

4.2 References: Pre-Hospital Trauma Life Support/Tactical Combat Casualty Care

(PHTLS/TCCC) protocols as established by the American College of Surgeons Committee on Trauma, the National Association of Emergency Medical Technicians

4.3 HQMC I BUMED & USSOCOM Final Approval Letter for ACTT & BCTT

4.4 Vendor CAPCE Institutional Accreditation Documentation

4.5 The Animal Welfare Act 9 CFR

4.6 TCCC Committee Guidance on Tactical Combat Casualty Care (current edition 2017)

4.7 Emergency War Surgery (EWS) NATO Handbook

4.8 FM 21-1 1 First Aid for Soldiers

4.9 FM 8-10-1 TIP for Medical Company

4.10 NAVMED P-117 Manual of the Medical Department

4.11 MCWP 4-11.1 Health Service Support Operations

4.12 Advanced Trauma Life Support (ATLS). American College of Surgeons

4.13 FM 8-10-6 Medical Evacuat ion in a Theater of Operations

4.14 JT PUB 4-02. l Joint Tactics, Techniques, and Procedures for Health

Service Logistics Support in Joint Operations

5. General Requirements. The contractor will provide basic and advanced training in

TCCC/AMT as follows:

a. Contractor shall provide all supplies and equipment necessary to execute the training requirements for training. Unit specific requirements will be provided by the unit, i.e., combat load-out gear, weapons, and uniforms if needed.

b. Contractor shall meet all USDA, Animal welfare Act 9 CFR, Institutional Animal Care and Use Committee, USSOCOM and approved protocols in conducting Advanced Medical Training.

c. Contractor shall be approved, in writing, by TECOM/BUMED/USSOCOM to provide TCCC and Live Tissue Training. This certification must be cuITent and a copy submitted at time of quote submittal.

d. Contractor shall have all land permits and insurance coverage to support the legal conduct of this training at their facility or other facilities; all local, state, and federal permits pertaining to USDA Approved Training; adhere to all applicable regulations for disposal of patient simulators, patient simulator products, other medical waste;

ensure all participants adhere to all local, state and federal regulations.

e. Contractor shall conduct medical product demonstrations of medical products pertinent to missions. (i.e.: hemostatic agents, tourniquets, chest dressings).

f. Contractor shall conduct trauma scenarios based on the level of student training and experience, and unit specific mission.

g. Course completion certificates will be issued to validate compliance with TCCC training requirements.

h. Contractor will provide all patient simulator delivery and appropriate removal/disposal.

L Contractor will provide all required Class VIII medical supplies.

J. Contractor will provide academic course materials for all subjects presented in the training to include course outline, student handouts and evaluation/testing results.

k. Contractor will provide Comprehensive After Action Assessment of attending personnel performance within 30 days completion of the course.

1. Instructor minimum qualifications are as follows:

• Subject Matter Expertise (SME) in TCCC/USDAAT as well as the Operational Medicine skills of the S_ OF Medic.

• SME/Instructor shall be current or prior medic/corpsman qualified in one of the following MOS's/NEC's/AFSC: 18D/68W-U-W l/68W-V- Wl/ 8403/8427/8491/1T2Xl(PJ).

• All instructors must have served in a special operations team, and have relevant combat experience.

o A special operations team is defined as 1 tour (1-3 years) with a FMF reconnaissance unit, Marine Special Operations Team (MSOT), Army Special Forces team, Ranger or Special Troops Battalion, Naval Special Warfare Squadron time, Special Tactics Squadron (STS).

o Relevant combat experience is defined as military operations performed in DOD designated combat zones, where the member received a combat action ribbon (or service equivalent) and campaign medal (e.g. GWOT/ACM/ICM/SWA) . A valor award satisfies this requirement as well if the instructors/SME have the following: NEC 9502, Master Training Specialist qualification and/or were instrnctors at either the Joint Special Operations Medical Training Center Fort Bragg, or PJ medical training center Kirtland, Air Force Base.

• All medical instructors/monitors shall be vetted and certified by the contractor to conduct all aspects of training and compliance with the USDA to include USDAAT Training IAW the Animal Welfare Act 9 CFR and approved protocols .

., Specific Course Requirements:

o Four (4) day Advanced Tactical Combat Casualty Care with AMT Course.

o Training courses will be required for up to 20 United States Navy personnel.

o The course shall be taught over a 4-day block that satisfies PHTLS/TCCC guidelines, to include Advanced Medical Training. Training shall include, but not be limited to, all the sub-components of TCCC.

o Contractor will provide two (2) SME Instructor to facilitate didactic training days ( TDl-3).

o Table-top instruction evolution consisting of: patient model familiarization, TCCC surgical procedures , fundamentals (e.g. treatments perfo1med during each phase of CUF, TFC, and TACEVAC) and proper treatments performed on patient model led by the instructor. This day of training should provide all the necessary skills to successfully treat and manage the following days COL An advanced scenario based evolution (i.e. Trauma lane Scenarios) depicting common wounding patterns found (e.g. GSW/Amputations/Blast wounds/Burns/Facial trauma/Fractures/evisceration/Tension Pneumothorax) and provides student the opportunity/facilities to work through each phase of TCCC (CUF, TFC, TACEYAC). The culminating events for this last day of training will be MASCAL operations in an effort to test and improve the unit's reporting (9 Line (ZMIST)) and Casualty Collection Point (CCP) operations. Students will be required to manage all injuries consistent with those outlined in TCCC, those seen in combat, and the approved protocols, and to the level described in all pertinent directives (i.e. what they learned during didactics). A 4:1 (student to patient ratio) is required for instruction during AMT.

o Training shall include didactic instruction and practical hands-on training and should equal at least 32 hours in length.

o Following specific skills must be covered:

• History of TCCC

• Phases of Care

• Casualty Carries

• Hemostasis:

• Apply Tourniquet

• Apply Direct Pressure

• Apply Pressure Dressing

• Apply Combat Gauze/ACS+Dressing o Airway:

• Chin-lift/Jaw-thrust

• Nasopharyngeal airway

• King LTD

• Intubations

• Cricothyroidotom o Breathing:

• _ Treat open Pneumothorax

• Needle Thoracotomy o Shock:

• Assess for shock

• IV/IO and fluid therapy

• Blood Transfusions o Burn and Blast Injuries o Head/Eye Injuries o Fracture Management and Splinting

• Minimum Contractor Material Requirements:

Contractor will provide:

o All USDAAT Models, Meds & Scenario Support Materials o Fuel for Vehicular Platforms supporting Training o Parts Blocks for Vehicle Platforms supporting Training

• Minimum Contractor Facility Requirements. All AMT must be in compliance with USN

Combat Trauma Training policy and performed at the contractor owned facility. The contractor's training facility shall be located within 50 miles of Port Hueneme, California and be a private location without noise restrictions due to type of training conducted.

Training area must comply with all local, state, and federal laws and regulation to provide for AMT and scenario training on training days 4.

o Contractor's facility must possess an animal containment area that has been approved by the USDA for use in AMT.

o Contractor's facility shall have an adequate tabletop area that is shaded and protected from any public view and is gated in order to prevent all unauthorized access during TCCC and AMT training. Moreover, the facility shall also possess a large open field area (greater than 5 acres) that is protected from any public view. Additionally, the field and natural foliage should be where AMT scenarios can be conducted with dismounted patrolling , and in full mission profile (FMP) gear.

• Government Furnished Items, Equipment (GFI/GFE).

o Individual and Team Uniforms and Equipment per Unit TE for students o Transportation for students and equipment to the training areas o Classroom for didactic classes o Government Points of Contact for this requirement:

Technical POC: HM2 George Sarpong 805-982-6592, email: george.sarpong@navy.mil Alternate Technical POC: I-iMl Diana Rudolf 805-982-6592, email: diana.rudolf@navy .mil Logistics POC: LS 1 Jerry Rusticus 805-982-3206, email: jerry.rusticus@navy.mil mailto:george.sarpong@navy.mil mailto:george.sarpong@navy.mil mailto:jerry.rusticus@navy.mil