N0024418Q0125_Draft_PWS_Abrasive_Blast_Booth.docx

DRAFT PERFORMANCE WORK STATEMENT

TITLE: NMCPAC CWD Unit Seal Beach Underwater Weapons Department (UWD), Abrasive Blast Booth/ Sandblaster Repair and Overhaul

1.0 Scope. This is a performance based service, completion type acquisition to provide services to repair and overhaul an abrasive blast booth/sandblaster.

1.1 Background. The Underwater Weapons Department at NMCPAC CWD Unit Seal Beach has a requirement to refurbish mine assets for the fleet. The current abrasive blast booth that UWD Mine Shop uses is currently inoperable. It is used to clear debris from mine assets when they are returned from exercises. Blasting the shapes is the first and most critical step in the refurbishment process.

2.0 Applicable. None.

3.0 Performance Requirements

3.1 Blast Booth Repair/Overhaul

3.1.1 All blast room panels to be spread, sealed with caulking and bolted back together also paint walls.

3.1.2 Remove & replace horsehair door inlet filters.

3.1.3 Remove steel plate floor inside blast room and complete overhaul on floor and roof ceiling.

3.1.4 Re-install steel floor, continuously welded seams.

3.1.5 Clean & seal concrete below steel floor.

3.1.6 Seal all wall panels at the floor.

3.1.7 Repair & seal exhaust duct to dust collector.

3.1.8 Disassemble & inspect all valves and piping gauges on the blast pot.

3.1.9 Replace any worn or wearing parts to include hoses and light covers.

3.1.10 Remove & replace (100) dust collector filter bags.

3.1.11 Check dust collector for leaks, patch as needed.

3.1.12 Re-seal access doors on top of dust collector.

3.1.13 Inspect & repair dust bag pulse-cleaning manifold

3.1.14 Inspect Magnehelic Gage, replace if faulty.

3.1.15 Inspect pulse jet timer & control board

3.1.16 Inspect and replacement of the grit reclamation system.

3.2 Acceptance Testing

3.2.1 Test Description. The contractor shall test the blast booth upon completion of the overhaul/repair. The test shall confirm that the blast booth functions and all features operate properly.

4.0 Travel. None.

5.0. Government Furnished Property. None

6.0 Security. The work to be performed on this task order is Unclassified.

7.0 Place of Performance

NMCPAC CWD Unit Seal Beach Underwater Weapons Department (UWD), Building 78 800 Seal Beach Blvd., Seal Beach, CA

9. 0 Inspection and Acceptance. Fully operational blast booth shall be inspected by the government technical coordinators and acceptance by the Contracting Officer's Representative (COR).

10. Technical Point of Contacts and COR:

Senior Chief Luis Flores,

(562) 626-7199 Cell (909)663-4838 Luis.Flores@navy.mil

LT. Dennis Nystrom,

(562) 626-7449 dennis.nystrom@navy.mil

COR: Nancy Bardwell (562)-626-7811 nancy.bardwell@navy.mil