1.05 - PWS_Spectrum Engineering Technical Support Services_DRAFT.pdf
PDF 450 KB Posted
- Attached to
- Spectrum Engineering Technical Support Services
- Solicitation number
- N0018927SSN181126
About this file
This is a Performance Work Statement (PWS) for spectrum engineering technical support services to the Navy and Marine Corps Spectrum Center (NMSC).
The contractor shall provide comprehensive spectrum engineering, Microsoft Office SharePoint, Link 16 Pulse Deconfliction Server (LPDS) administrative and sustainment support, and administrative services to support NMSC's electromagnetic spectrum management mission. Key objectives include: reviewing and certifying system spectrum requirements; providing Link 16 engineering support and JTIDS/MIDS/JTRS Electromagnetic Compatibility Features (EMCF) certification; managing and sustaining the LPDS software tool for spectrum certification and operational compliance; facilitating commercial broadband installation projects on Navy and Marine Corps property; providing IFF engineering subject matter expertise and interagency coordination; supporting research, development, testing, and evaluation for frequency assignments and emerging technologies such as 5G; providing dedicated spectrum advocacy to acquisition program offices throughout their lifecycle; reviewing Spectrum Supportability Risk Assessments; supporting spectrum band sharing initiatives; and providing ad hoc technical policy and procedural reviews. The contract is structured as an Indefinite Delivery, Indefinite Quantity (IDIQ) agreement with a five-year base ordering period (August 1, 2027 through July 31, 2032) and one six-month option ordering period (August 1, 2032 through January 31, 2033). Performance shall occur approximately 50 percent at the government site (NMSC, Fort Meade, Maryland) and 50 percent at contractor facilities, with core hours Monday through Friday, 0800–1630 Eastern Standard Time, excluding federal holidays. All contractor personnel must hold a minimum Secret security clearance and be adjudicated at contract start. The PWS requires a 30-day transition-in period with detailed staffing, security, IT access, and knowledge transfer milestones, and mandates a comprehensive transition-out plan maintained throughout contract performance. Deliverables include monthly progress reports, technical review reports, meeting minutes, LPDS engineering documentation and source code, quality control plans, trip reports, and various technical assessments, with formats and submission frequencies specified in Appendix B. Labor categories specified include senior, mid-level, and junior electrical engineers; senior and mid-level software engineers; and administrative assistants, each with defined education, experience, and clearance requirements listed in Appendix C.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT (PWS)
NAVY AND MARINE CORPS SPECTRUM CENTER (NMSC)
SPECTRUM ENGINEERING TECHNICAL SUPPORT SERVICES
1.0 INTRODUCTION:
This Performance Work Statement (PWS) covers the requirements analysis, design, development, integration, test, and engineering efforts necessary to provide the Navy and Marine Corps Spectrum Center (NMSC) with essential technical support. This support is focused on the planning, retention, protection, and effective use of electromagnetic spectrum (EMS) resources in support of operations for the Department of the Navy (DoN), the management sustainment of the Link 16 Pulse Deconfliction Server (LPDS), and the Electromagnetic Compatibility Features (EMCF) certification of Joint Tactical Information Distribution System/Multifunctional Information Distribution System (JTIDS/MIDS) and Joint Tactical Radio System (JTRS) terminals in support of the Department of War (DoW).
1.1 MISSION:
The Commander, U.S Fleet Forces Command (USFFC) generates, directly and through the Information Warfare (IW) enterprise, agile and technically superior manned, trained, equipped, and certified combat-ready IW forces to ensure Navy will decisively deter, compete, and win. USFFC is responsible for Navy IW force generation and delivery to naval and joint operational commanders; IW doctrine, policy and governance; training requirements; and community management.
NMSC – an operational force under USFFC – exercises management and control of electromagnetic spectrum (EMS) matters for the Department of the Navy (DoN). As delegated by the operational chain-of-command, NMSC serves as the representative of the DoN in Joint, Allied, National, and International meetings and organizes, coordinates, formulates, and implements policies and procedures to support the DoN's interest in EMS matters worldwide. In addition, NMSC provides subject matter expertise in the management and control of EMS for the DoN.
1.2 BACKGROUND:
The DoN requires radio frequencies (RF) spectrum expertise at the national level to ensure cohesive and effective spectrum engineering interoperability support between the DoN and other Federal agencies throughout the Government. In executing its functions and responsibilities, NMSC pursues the program area of engineering support, which requires technical support to achieve overall management and control of EMS matters for the DoN.
Information-sharing and interoperability are important capabilities of Link 16 and an integral part of military tactical operations. The LPDS is an internet-based scheduling software tool used to satisfy Link 16 spectrum certification and operational requirements. The DoW requirement to manage LPDS is in accordance with Interdepartment Radio Advisory Committee (IRAC) Document 33583/1 to address the protection of FAA Aeronautical Radio Navigation systems and the overall safety of the national airspace (NAS). The policy for implementing this requirement is detailed in CJCSI 6232.01 "Link 16 Spectrum Operations and Deconfliction".
2.0 APPLICABLE DOCUMENTS AND DATABASES:
The contractor shall utilize and maintain compliance with the latest versions of the following resources, databases, and instructions, which are utilized 100% of the time during performance:
a. DoD Instruction 4650.01, Policy and Procedures for Management and Use of the Electromagnetic Spectrum
b. ITU Radio Regulations
c. ITU Convention and other ITU service publications
d. Radio-Communication Bureau (RB) documents
e. U.S. National Table of Frequency Allocations
f. National Telecommunications and Information Administration Manual of Regulations and Procedures for
Federal Radio Frequency Management
g. Navy Telecommunications Procedures Manual Fleet Procedures (NTP-6)
h. SECNAVINST 2400.1 series
i. OPNAVINST 2400.20 series
j. OPNAVINST 2420 series
k. OPNAVINST 5450.227
l. DODI 5000.02
m. DD Form 1494 EMC Application for Equipment Frequency Allocation
n. DODM 4650.01 EMC Features Certification Manual
o. Equipment Location- Certification Information Database (EL-CID)
p. Online Equipment Location – Certification Information database (EL-CIDO)
q. NMSC Business Process Management (BPM)
r. End-to-End Supportability System (E2ESS)
s. Joint Spectrum Database Repository (JSDR)
t. SECNAVINST 5510.30C, Personnel Security Program
u. CJCSM 3320.01D
v. CJCSM 3320.02F
w. CJCSI 6232.01F
x. CJCSM 3212.02D
y. CJCSM 3212.03-1
z. CJCSM 6235.01
aa. CJCSI 3320.03E
bb. CJCSM 3212.03C
cc. CJCSM 6235.01
dd. DON AMBIT Analysis Tool (DAAT)
ee. Navy Electronic News Gathering Analysis Tool (NEAT)
ff. COMUSFLTFORCOMINST 1080.1A
gg. NMSCINST 2410.1 TSDF Calculation Instruction,
hh. Total Workforce Management System (TWMS),
ii. IAW SECNAV Instruction 12752.1A,
jj. Application Security and Development Security Technical Implementation Guide (STIG), and other STIGs applicable to the hosting environment and to any LPDS dependent COTS products,
kk. Spectrum XXI
ll. VISUALYSE
All documents and databases are used the majority of the time.
3.0 OBJECTIVE:
The contractor shall provide NMSC with Spectrum Engineering, Microsoft Office SharePoint, LPDS administrative and sustainment support, and administrative expertise for support of a non-personal nature for the tasks detailed below. The tasks described herein are indefinite in nature and may be ordered by placing a task order. The major efforts shall be performed within the National Capital Region (Washington, D.C.) area at Government or contractor provided locations, as well as various CONUS locations. The support will also include travel to and from the place of business to attend and participate in Naval, Joint Military and National meetings as identified under Section 4.
This does not include reimbursement for local travel within 15 miles of standard duty location.
3.1 SCOPE:
The contractor shall provide NMSC with high-level electrical engineering and specialized programmatic expertise to ensure the technical accuracy, regulatory compliance, and efficient execution of NMSC’s spectrum certification, electromagnetic compatibility, and national security missions. This dual-capability support bridges the gap between complex RF engineering analysis and the structured administrative workflows required for Federal spectrum governance.
The contractor shall provide dedicated LPDS program support and development teams to manage, monitor, and sustain the LPDS. The LPDS requires subject matter expertise for daily management, software maintenance, software monitoring to address inefficiencies, software obsolescence, IT/cyber security compliance, and monitoring of current and future IT/cyber standards vulnerabilities to protect DoW operational requirements.
The contractor shall provide a dedicated Electromagnetic Compatibility Features (EMCF) certification support to execute the EMCF certification and validation process for the DoW operating within the United States and Possessions (US&P) National Airspace System (NAS) and in partner nation events.
The contractor shall provide engineering, analytical, and technical coordination support to facilitate the evaluation, deconfliction, and processing of spectrum-sharing coordination requests between DoW entities and commercial licensees. This support ensures that NMSC operations preserve spectrum access, prevent EMI, and remain compliant with national and international spectrum-sharing frameworks.
4.0 TASK REQUIREMENTS:
Provide electrical engineering and administrative expertise in support of NMSC’s mission. This program requires technical support to review and analyze various Joint, National, Allied, and International policies, regulations, and procedures; research and evaluate spectrum requirements; and identify, analyze, and recommend measures to resolve radio frequency interference and encroachment problems.
4.1 Contractor shall review system certification requests and provide actionable recommendations to the submitting program office. At a minimum, the review shall consist of: 1) Whether the application is necessary, the equipment is already certified, or identical/similar equipment has been certified; 2) Assess whether the request is complete with the degree of accuracy required to obtain spectrum certification; 3) Determine if the equipment can be operate within the U.S. and International Tables of Allocations, within governing regulations, and technical criteria required for certification; and 4) Identify risks associated with spectrum certification for both the current system submission and programmatic risks regarding system evolution and future review stages.
4.2 Contractor support personnel must possess a solid working knowledge of: 1) ITU BR Satellite registration processes, procedures, and databases; 2) working knowledge of basic ITU satellite engineering formulas (e.g., Power Flux Density [PFD], Delta T/T, C/I calculations, etc.); familiarity with satellite-related ITU Radio Regulations and NTIA manual regulations; 4) outstanding communication skills (verbal and written) as well as understanding of ITU software (e.g., Visualyse and other software), and strong Microsoft Office skills (Word, Excel, PowerPoint). The contractor shall provide required information and documentation during satellite coordination technical exchanges, develop recommended policy positions for NMSC on spectrum engineering and management issues, and deliver all work artifacts—including documentation, reports, data, analysis assumptions/results, and modeling tools—to NMSC.
4.3 The contractor shall facilitate commercial broadband installation projects on Navy and Marine Corps property. This will include providing RF engineering support, maintaining situational awareness, and reporting on project status. To mitigate significant delays, the contractor shall escalate challenges associated with installation to the NMSC Director, Fleet Forces, OPNAV, HQMC C4 Spectrum, Department of the Navy Chief Information Officer (DON CIO) Spectrum, ASN (EI&E) Real Estate, MCICOM GF, and CNIC N44. Finally, the contractor shall compile lessons learned and, upon completion of each project, recommend process improvements to accelerate future commercial broadband installation timelines.
4.4 The contractor shall provide advisory, technical, and coordination support to NAVWAR to coordinate. All official policy positions, regulatory decisions, and agency commitments remain the sole authority of the United States Government.
Specifically facilitate JTIDS/MIDS and JTRS EMCF certification and provide technical recommendations between NTIA, FAA and NAVWAR Certification Authority for final decision. In accordance with this task, the contractor shall accomplish the following:1) Link 16 engineering support for the test and evaluation of JTIDS/MIDS, JTRS, as well as newly fielded systems requiring Link 16 spectrum support; 2) Engage at the national level with the NTIA and FAA at Spectrum Planning Subcommittee (SPS) Working Group 1 to obtain critical spectrum support for all DoW Link 16 waveform-equipped platforms, including EMCF certification and demonstration requirements;
3) Provide advisory, technical support related international partner nations utilizing JTIDS/MIDS and JTRS equipment looking to gain host-nation certification support; 4) Provide support for the Multinational Working Group (MNWG) meeting.
In support of this task, the contractor shall provide spectrum engineering in the Joint-Service programs areas of Link 16 and advanced technology such as software-defined radios to the DoN. This includes the review and analysis of requests for frequency assignment support and coordinating successful approval from the FAA and other Federal agencies of frequency assignment support requests. The contractor shall provide technical support for all necessary meetings to provide and obtain information relating to support of JTIDS/MIDS and JTRS software defined radios and DoN spectrum engineering support.
4.5 The Electromagnetic Compatibility (EMC) features of Link 16 systems used throughout the DoW shall be certified to ensure compliance with applicable requirements and specifications. The contractor shall support the review and certification process for all Link 16 systems. Responsibilities include reviewing Link 16 documentation such as test plans, technical characteristics, and DD Form 1494 submissions and participating in design reviews.
Additionally, the contractor shall witness certification testing ensuring it is in accordance with Acceptance Test Procedures (ATPs)
4.6 The contractor shall provide technical support to operate and maintain the Link 16 Pulse De-confliction Server (LPDS), including executing software upgrades, addressing all cyber security vulnerabilities, and updates as required. Contractors shall assist users in obtaining login credentials and provide technical guidance to system users and the Joint Staff regarding Link 16 pulse de-confliction compliance requirements. LPDS requirements are controlled by the LPDS Configuration Control Board (CCB). Cyber security requirements will be managed through coordination with the Defense Information Systems Agency (DISA) team as the network host.
4.7 The contractor shall provide Identification Friend or Foe (IFF) engineering subject matter expertise to deliver technical reviews, interagency coordination, and organizational support. Technical responsibilities shall focus on mitigating system-specific technical issues for new and existing IFF systems, and evaluating standard or policy changes that may impact existing programs and platforms. Coordination efforts require leveraging interagency relationships with the DoW, Other Government Agencies (OGAs), and commercial entities. The contractor shall provide technical advisory support during coordination of active technical representation and formal coordination with Navy program offices, other military services, the DoD AIMS Program Office, the FAA, the NTIA, and private industry partners within the spectrum and IFF communities. Organizational support shall encompass meeting attendance, minutes preparation, metrics tracking, action item management, and the drafting of NMSC position papers. All formal representations are executed by Federal personnel.
4.8 The contractor shall provide technical support for Research, Development, Testing and Evaluation (RDT&E) for frequency assignments, emerging technologies such as 5th Generation (5G), along with electronic warfare system development and authorization.
4.9 The contractor shall provide technical support to program offices that have identified and funded a need for dedicated spectrum advocacy within the Navy. Major acquisition programs remain in the acquisition lifecycle with cutting edge spectrum technologies that require strategic integration and socialization with the primary users of those frequency bands. The contractor shall provide prioritized technical support to the acquisition program offices throughout the entire lifecycle of their spectrum requirements.
4.10 The contractor shall review submitted Spectrum Supportability Risk Assessment (SSRA) to evaluate and determine if, in fact, the SSRA statements adequately document the findings. To verify that the expected complement of S-D systems anticipated in the system’s operating environment has been defined and the potential interference between the candidate system and the S-D systems in the operational environment has been quantified.
Monitor Spectrum Supportability Integrated Product Team (SSIPT) activities and provide technical and procedural advice to improve the SSIPT for the DoN.
4.11 The contractor shall support NMSC engineering and spectrum management requirements regarding the potential sharing of DoN spectrum bands under the National Spectrum Strategy. The contractor shall research, analyze, and identify all Navy and Marine Corps equipment operating within targeted frequency bands as well as within adjacent and harmonically related bands that are under evaluation for reallocation or sharing under current executive or legislative spectrum initiatives. The contractor shall support commercial vendor DoW coordination requests (CRs) submission utilizing the DON AMBIT Analysis Tool (DAAT) or Navy Electronic News Gathering Analysis Tool (NEAT) software.
4.12 AD HOC Support - The contractor shall provide spectrum engineering and management subject matter expertise to evaluate proposed, draft, and established spectrum policies, regulations, instructions, directives, procedures, and operational documents. The contractor shall conduct thorough technical reviews and formulate draft technical responses for Government review and approval to support the Government's defense of DoN positions, ensuring the protection of legacy, current, and future Navy and Marine Corps spectrum interests during interagency meeting discussions.
4.13 Administrative Support - The contractor shall provide dedicated administrative support to the government team as directed by engineering leads (tasking must flow through the Contractor’s Program Manager / Lead), N2 Engineering Division requirements; including updating master Spectrum Planning Subcommittee (SPS) and Equipment Spectrum Certification (ESC) submission trackers and facilitating the overall SPS and ESC submission processes.
5.0 DELIVERABLES:
The contractor shall deliver data items, reports, draft documents, recommendations, and briefing materials as specified on each task order. See Appendix B “Deliverables Schedule” for additional information.
6.0 QUALITY CONTROL PLAN (QCP):
The contractor shall develop and maintain an effective QCP to ensure services are performed in accordance with the PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it ensures the work complies with the requirements of the contract. The contractor shall prepare a QCP for Government review within ten (10) business days of contract award. A comprehensive written QCP shall be submitted to the Procuring Contracting Officer (PCO) and Contracting Officer’s Representative (COR) within five (5) business days of when changes are made thereafter.
Following initial QCP acceptance, any subsequent modifications proposed by the contractor require written authorization from the PCO.
7.0 SECURITY CLEARANCE REQUIREMENT:
The contractor shall be a United States contractor that is licensed, chartered, or incorporated in the United States.
The contractor shall perform this contract in accordance with the Code of Federal Regulation (32 CFR Part 117) and shall ensure that classified material is handled in accordance with the latest appropriate security classification specification.
The Contractor shall propose and deliver qualified personnel with relevant, recent and suitable experience as well as appropriate education levels, training credentials, and backgrounds as applicable and as indicated in Appendix C “Labor Categories and Qualifications Requirements” of this PWS. All personnel must be eligible AND adjudicated to the Secret level at contract start. The Contractor shall submit adequate clearance packages within ten (10) calendar days of identification of increased security requirements.
DD Form 254 “Department of Defense Security Classification Specification” to be provided as a separate attachment.
7.1. Operations Security
Background, OPSEC is a process used to protect unclassified sensitive Information from exploitation by an adversary. Sensitive unclassified information—which is also referred to as critical information or critical program information (CPI)—is defined as information that is not classified but which needs to be protected from unauthorized disclosure. Examples are information labeled “For Official Use Only (FOUO),” proprietary information, contractor sensitive information, limited distribution information, and personally identifiable information (PII).
7.1.1. The contractor and all subcontractors shall provide OPSEC protection for sensitive unclassified information as identified in the critical information list and CPI list, if applicable. The prime contractor and all subcontractors shall employ the countermeasures listed below in order to protect that information.
Additional countermeasures may be employed as necessary. If an OPSEC Plan is provided, the contractor and all subcontractors shall comply with that plan. These OPSEC requirements will be in effect throughout the life of the procurement from award through the conclusion of services at the end of the period of performance (PoP) or other procurement termination. If required, the contractor and all subcontractors shall prepare an OPSEC Plan.
7.1.2. Contractor personnel shall follow OPSEC concepts and principles in the conduct of this requirement to protect critical information, personnel, facilities, equipment, and operations from compromise. The contractor shall consult with the subject matter expert (SME) within 5 working days of receipt of order to determine all special circumstances affecting OPSEC under this requirement. In any case where there is uncertainty or ambiguity regarding OPSEC measures, the contractor shall consult the SME as soon as possible. If the SME is unavailable, the contractor shall consult the contracting officer. The prime contractor and all subcontractors shall provide OPSEC protection for sensitive unclassified information and comply with all OPSEC requirements.
7.1.3. Minimum Protection Requirements for Critical Information Critical information is exempt from public release under Exemption 2 of the Freedom of Information Act (FOIA). It is designated “For Official Use Only (FOUO)” and is considered controlled unclassified information (CUI). Specific CPI, for reasons of OPSEC will not be identified to offerors prior to award. CPI will be identified to the successful offer or only after receipt of contract award.
8.0 ORDERING PERIOD:
The resultant Indefinite Delivery, Indefinite Quantity (IDIQ) contract will consist of the following five-year base ordering period and one (1) six-month option ordering period (in accordance with FAR Clause 52.217-8 “Option to Extend Services”): The ordering periods are as follows:
Base Ordering Period: 1 August 2027 through 31 July 2032 Option Ordering Period: 1 August 2032 through 31 Jan 2033 ***
*** The option period represents services covered under FAR 52.217-8 “Option to Extend Services” – which shall not exceed six (6) months.
NOTE: The performance period of individual task orders will be established at the time of task order issuance.
9.0 PLACE OF PERFORMANCE:
The place of performance is as follows:
Government Site – 50% (estimated)
NMSC
6916 Cooper Avenue, FT Meade, MD 20755
Contractor Site – 50% (estimated)
10.0 HOURS OF OPERATION:
The core hours of operation are Monday through Friday (excluding Federal holidays) from 0800 through 1630 (Eastern Standard Time). The contractor is required to perform situational teleworking during times of emergencies.
The office will be closed during the following Federal holidays:
New Year’s Day Martin Luther King Jr. Day Presidents Day Memorial Day Juneteenth Day Independence Day Labor Day Columbus Day Veterans Day Thanksgiving Christmas Day
11.0 Transition Schedule and Continuity of Services
11.1 General Transition Requirements
The Contractor shall ensure uninterrupted continuation of all core spectrum management support activities throughout the life of the contract. The transition period consists of a structured Transition-In Period and an operational Transition-Out Period. During both phases, the Contractor shall coordinate closely with the Contracting Officer (KO), Contracting Officer’s Representative (COR), and outgoing/incoming personnel to maintain full operational readiness and zero degradation of spectrum certification and engineering services.
11.2 Transition-In Plan and Execution
The Contractor shall execute a smooth, orderly transition from the incumbent contractor or Government staff within a maximum of thirty (30) calendar days following contract award (or issuance of the Notice to Proceed).
• Transition-In Plan Delivery: The Contractor shall submit a finalized, comprehensive Transition-In Plan no later than the post-award Kick-Off Meeting (or within ten (10) calendar days of award).
• Weekly Transition Status Briefings: The Contractor shall provide weekly transition status reports and briefings to the COR detailing milestone progress, onboarding status, risks, and mitigations.
11.2.1 Criteria for Successful Transition-In
A successful Transition-In is achieved when the Contractor satisfies all of the following milestone conditions prior to the end of the 30-day period:
1. Staffing Readiness & Key Personnel:
o 100% of Key Personnel onboarded, fully qualified, and in place on Day 1 of full performance.
o At least 90% of non-key technical and support staff onboarded by Day 20, reaching 100% staffing readiness by Day 30.
o Verification of all necessary professional certifications, security clearances, and specialized spectrum competencies.
2. Security Clearances, Badging, and Facility Access:
o Clearance verifications completed through the Defense Information System for Security (DISS) or relevant security authority.
o Issuance and activation of Common Access Cards (CACs), Government installation passes, and building access credentials for all personnel.
3. IT Systems Access and Account Provisioning:
o Execution of required Non-Disclosure Agreements (NDAs), System Authorization Access Requests (SAAR / DD Form 2875), and Cyber Awareness training.
o Provisioned user accounts and verified connectivity to Government networks, portals, and specialized spectrum management databases (e.g., Stepstone, EL-CID, SFAF, and Service-specific spectrum repositories).
4. Knowledge Transfer and Process Assimilation:
o Completion of incumbent shadow-training and desktop process walkthroughs covering ongoing certification evaluations, active RFIs, and high-priority programs.
o Review, validation, and adoption of current Standard Operating Procedures (SOPs), working templates, and case tracking logs.
5. Government-Furnished Property (GFP) and Information (GFI) Transfer:
o Completion of joint physical inventory and signed hand-receipt custody transfer for all Government Furnished Equipment (GFE), software licenses, documentation, and reference archives.
6. Full Operational Capability (FOC) Declaration:
o Formal joint readiness review conducted with the COR at Day 25 to validate that the Contractor has assumed unilateral responsibility for all PWS tasks without Government interruption.
11.3 Transition-Out Plan and Lifecycle Maintenance
The Contractor shall maintain a viable, comprehensive Transition-Out Plan throughout the period of performance to ensure seamless succession at contract expiration, termination, or transition to a follow-on contractor.
• Initial Delivery and Maintenance: The Contractor shall submit the initial Transition-Out Plan at the conclusion of the thirty (30) day Transition-In period. The Contractor shall review and update the Transition-Out Plan annually and within ten (10) business days of any significant contract or task order modification.
• Transition-Out Execution Window: Unless directed otherwise by the KO, the formal Transition-Out phase shall commence sixty (60) calendar days prior to the contract expiration date (or immediately upon receipt of a termination notice).
11.3.1 Required Transition-Out Activities
During the Transition-Out period, the Contractor shall actively facilitate the onboarding and technical orientation of the successor contractor or Government personnel, including:
1. Continuity of Operations: Maintain full staffing and performance levels across all operational review tasks until the final hour of contract performance.
2. Knowledge and Operational Handoff:
o Conduct structured orientation sessions and side-by-side shadowing with the successor workforce.
o Transfer detailed status logs of all ongoing spectrum certification reviews, open deficiency reports/RFIs, pending NTIA/ITU submissions, and stakeholder points of contact.
o Deliver updated SOPs, run-books, job aids, and workflow documentation.
3. Data and Digital Asset Turnover:
o Consolidate and transfer all work-in-progress, deliverables, technical evaluation records, historical certification packages, databases, and digital libraries to the Government or incoming contractor without restriction or proprietary encumbrance.
o Ensure all local working directories, shared drives, and Government-hosted repositories are cleanly cataloged, up-to-date, and fully accessible.
4. Property, Facilities, and System Account Reconciliation:
o Conduct a 100% physical inventory reconciliation of all GFE/GFP, materials, and equipment, delivering an auditable Joint Inventory Reconciliation Report to the Property Administrator and
COR.
o Surrender all Government badges, CACs, keys, cryptographic credentials, parking placards, and security tokens.
o Coordinate the timely de-provisioning and closure of all contractor network accounts, VPN tokens, and system authorizations.
5. Final Transition-Out Closeout Report: Submit a formal closeout memorandum to the KO and COR summarizing completed turnover milestones, transferred assets, unresolved issues (if any), and certifying the total transfer of responsibilities.
12.0 TRAVEL:
The contractor may be required to perform local, within 50 miles of the normal work location, and temporary duty (TDY) non-local travel (both CONUS and OCONUS) in the performance of this contract. The contractor shall provide necessary information for compliance with travel policies and requirements. The Government will authorize travel expenses consistent with the substantive provisions of the Federal Travel Regulations (FTR).
The contractor shall submit all travel requests in writing to the COR for approval at least one (1) week prior to the date that the required travel is scheduled to begin. With the approval of the COR, contractor personnel are authorized to use Government vehicles to support contract requirements in accordance with 41 CFR 101-38.301-1.
Emergency (last minute) travel requirements shall also be coordinated as indicated above by telephone, email, or fax, as necessary.
12.1 REIMBURSEMENT OF TRAVEL COST:
(a) Travel
(1) Area of Travel. Performance under this contract may require travel by contractor personnel. If travel, domestic or overseas, is required, the contractor is responsible for making all needed arrangements for personnel.
This includes, but is not limited to, the following:
Medical Examinations Immunization Passports, visas, etc.
Security Clearances
All contractor personnel required to perform work on any U.S. Navy vessel will have to obtain boarding authorization from the Commanding Officer of the vessel prior to boarding.
(2) Travel Policy. The Government will reimburse the contractor for allowable travel costs incurred by the contractor in performance of the contract and determined to be in accordance with FAR Subpart 31.2, subject to the following provisions:
Travel required for tasks assigned under this task order shall be governed in accordance with rules set forth for temporary duty travel in FAR 31.205-46.
(3) Travel. Travel, subsistence, and associated labor charges for travel time are authorized, whenever a task assignment requires work to be accomplished at a temporary alternate worksite.
Travel performed for personal convenience and daily travel to and from work at contractor’s facility will not be reimbursed.
(4) Per Diem. Per diem for travel on work assigned under this task order will be reimbursed to employees consistent with company policy, but not to exceed the amount authorized in the Joint Travel Regulations (JTR).
(5) Shipboard Stays. Whenever work assignments require temporary duty aboard a Government ship, The Government will reimburse the contractor for allowable meals and incidental expenses in accordance with the shipboard travel provisions of the current Department of Defense Joint Travel Regulations (JTR).
(6) Air/Rail Travel. In rendering the services, the contractor shall be reimbursed for the actual costs of transportation incurred by its personnel, not to exceed the cost of tourist class rail, or plane fare, to the extent that such transportation is necessary for the performance of the services hereunder and is authorized by the Ordering Officer. Such authorization by the Ordering Officer will be indicated in the order or in some other suitable written form.
NOTE: To the maximum extent practicable without the impairment of the effectiveness of the mission, transportation shall be tourist class. In the event that only first-class travel is available, it will be allowed, provided justification therefore is fully documented and warranted.
(7) Private Automobile. The use of privately owned conveyance within the continental United States by the traveler will be reimbursed to the contractor at the mileage rate allowed by the Joint Travel Regulations (JTR).
Authorization for the use of privately owned conveyance shall be indicated on the order. Distances traveled between points shall be shown in standard highway mileage guides. Any deviations from distance shown in such standard mileage guides shall be explained by the travelers on their expense sheet.
(8) Car Rental. The contractor shall be entitled to reimbursement for car rental, exclusive of mileage charges, as authorized by each order, when the services are required to be performed outside the normal commuting distance from the contractor’s facilities. Car rental for TDY teams will be limited to a rate of one car for every four
(4) persons on TDY at one site.
13.0 GOVERNMENT PROVIDED MATERIAL (EQUIPMENT/FACILITIES/SUPPLIES - ALL
INCIDENTAL):
The Government will provide contractor personnel with a Common Access Card (CAC), access to Navy Marine Corps Intranet (NMCI), Non-Classified Internet Protocol Router (NIPR) network and Secure Internet Protocol Router (SIPR) network, along with other required databases (e.g., EL-CID)
The Government will provide onsite facilities with NIPR and SIPR network connections.
The Government will provide furnished utilities. The contractor shall instruct employees to follow the facility policy.
The Government will provide contractor personnel a desk, computer, telephone, and office supplies for use throughout the duration of this contract. In addition, contractor personnel will have access to NMSC equipment (e.g., copiers, fax machines, and other equipment) necessary to perform the requirements outlined in this PWS.
Contractor personnel shall be required and expected to adhere to all NMSC polices, guidelines, and standards of conduct throughout the duration of this contract. The use of Government facilities, equipment, and materials shall be used for official Government business only. Government provided material will also be provided for situational teleworking.
14.0 INFORMATION SECURITY:
All persons performing work under this IDIQ contract (and resultant task orders) shall protect and safeguard information in accordance with DoD and NMSC directives, instructions, and procedures. These same persons shall immediately report any deviation or violation of this guidance, or any unusual or suspicious activity to the NMSC Security Office. These same persons will provide assistance and full cooperation in any subsequent investigations or inquiries conducted by NMSC or other governmental agencies.
15.0 CONFIDENTIALITY:
This project and all materials provided to the contractor by the Government and results, conclusions, and recommendations obtained thereof should be considered confidential in nature and treated with the same level of care that the contractor treats its own confidential business information. The information shall not be disclosed, copied, modified, used (except in completion of this project) or otherwise disseminated to any other person or entity at any time to include, but not limited to inclusion in any database external to DoD without DoD’s express consent.
16.0 NON-PERSONAL SERVICES:
Contractor personnel performing services under this IDIQ contract (and resultant task orders) shall be controlled, directed and supervised at all times by management personnel of the contractor. Contractor management shall ensure that employees properly comply with the performance work standards outlined in the IDIQ contract (and resultant task orders). Contractor personnel shall perform their duties independent of, and without supervision of, any Government official. The tasks, duties, and responsibilities set forth in the IDIQ contract (and resultant task orders) may not be interpreted or implemented in any manner that results in any contractor employee creating or modifying Federal Policy, obligating the appropriated funds of the United States Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee, or otherwise violating the prohibitions set forth in Subparts 7.5 and 37.2 of the Federal Acquisition Regulation (FAR). The Government will control access to the facility and will perform the inspection and acceptance of the completed work.
17.0 SPECIAL INSTRUCTIONS/CONSIDERATIONS:
The contractor agrees to enter into a written agreement with any firm whose proprietary data is used in connection with performance of the IDIQ contract (and resultant task orders), to protect all proprietary information from unauthorized disclosure or use for as long as it remains proprietary, to furnish the Contracting Officer with executed copies of all such agreements, and to refrain from using any proprietary information in supplying to the Government goods or services, or for any purpose other than that for which it was intended. The contractor agrees that any information furnished by the Government to the contractor not generally available to other contractors shall be used only for performance under this IDIQ contract (and resultant task orders), and all copies of such information shall be returned to the Government upon completion of the effort. Any information furnished by the Government containing trade secrets or commercial or financial data of other contractors shall be treated as proprietary data. Additionally, the contractor shall not disclose outside the Government any information generated in the performance of this IDIQ contract (and resultant task orders).
18.0 DATA RIGHTS:
The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software produced under this contract shall be Government-owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government will remain the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.
19.0 CONTRACTOR PERSONNEL IDENTIFICATION:
Contractor employees shall identify themselves as contractor personnel by introducing themselves or being introduced as contractor personnel and displaying distinguishing badges or other visible identification for meetings with Government personnel. In addition, contractor personnel shall appropriately identify themselves as contractor employees in telephone conversations and in formal and informal written correspondence.
20.0 INSTALLATION SECURITY:
CONTRACTOR UNCLASSIFIED ACCESS TO FEDERALLY CONTROLLED FACILITIES, SENSITIVE
INFORMATION, IT SYSTEMS OR PROTECTED HEALTH INFORMATION
Executive Order 13467, Reforming Processes Related to Suitability for Government Employee, Fitness for Contractor Employees and Eligibility for Access to Classified National Security Information, Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The 5 CFR 32 Part 157 in concert with DoD Manual 1000.13, Vol 1, implements the Federal Standards.
APPLICABILITY
This text applies to all DoD sponsored individuals who require CAC eligibility (or login and P/W if acceptable per contract) for: Physical access to DoD facilities or non-DoD facilities on behalf of DoD; Logical access to information systems (whether on site or remotely); or remote access to DoD networks that use only the CAC logon for user authentication, or access to sensitive and protected information. This applies to the Office of the Secretary of Defense (OSD), the Military Departments, the Office of the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Combatant Commands, the Office of the Inspector General of the DoD, the Defense Agencies, the DoD Field Activities and all other organizational entities within the DoD (hereinafter referred to collectively as the "DoD Components").
Each contractor employee providing services at a Navy command under this contract is required to obtain a DoD CAC. Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.
ACCESS TO FEDERAL FACILITIES
Definition. As used in this clause - Military installation means a base, camp, post, station, yard, center, or other activity under the jurisdiction of the Secretary of a military department, or, in the case of an activity in a foreign country, under the operational control of the Secretary of a military department or the Secretary of Defense (see 10 U.S.C. 2801(c)(4)).
Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command's Security Manager (CSM) upon arrival to the command and shall out-process prior to their departure at the completion of the individual's performance under the contract.
Training. Contractor employees who require routine physical access to a Federally controlled facility or military installation shall complete “Level I Antiterrorism Awareness Training” prior to gaining access to a facility and annually thereafter in accordance with DoDI O-2000.16 Vol. 1. In accordance with Department of Defense Instruction O-2000.16 Volume 1, DoD Antiterrorism (AT) Program Implementation: DoD AT Standards, Level I Antiterrorism Awareness Training shall be completed by:
1. Completion of “Level I Antiterrorism Awareness Training” available at https://jkodirect.jten.mil/pdf/atl1/launch.html; or
2. Under the instruction of a qualified Level I Antiterrorism Awareness instructor; or
3. By providing a training certificate for “Level I Antiterrorism Awareness Training” training showing completion within the last calendar year.
The contractor will submit certificates of completion for each affected contractor employee and subcontractor employee to the COR or to the contracting officer, if a COR is not assigned, prior to being granted access to a Federally controlled facility or military installation.
Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in subcontracts, including subcontracts for commercial items, when subcontractor performance requires routine physical access to a Federally-controlled facility or military installation.
OPERATION SECURITY (OPSEC)
It is DoD policy according to DoD Directive 5205.02E, “DoD Operations Security (OPSEC) Program,” June 20, 2012, as amended to establish and maintain OPSEC programs to ensure national security-related missions and functions are protected.
Training: Contractor employees shall comply with all DoD OPSEC requirements and complete “OPSEC Awareness for Military Members, DoD Employees and Contractor” training within 30 days of onboarding the contract and annual refresher training thereafter. Training shall be completed through a DoD sponsored and certified computer or web-based learning instruction available at https://securityawareness.usalearning.gov/opsec/index.htm.
The contractor will submit certificates of completion for each affected contractor employee and subcontractor employee to the COR or to the contracting officer, if a COR is not assigned, within 30 calendar days after training is completed by all employees and subcontractor personnel.
START-UP PERIOD
All contractor resource onboarding documents must be submitted via the prime contractor. The prime contractor shall make all necessary preparations to assume full responsibility for productive performance as of the performance start date.
Definition of "productive":
a. OF-306 signed by contractor employee
b. FD-258 Fingerprint Card (Contingent upon availability of electronic fingerprinting submission)
c. Completed Electronic Investigation (e-QIP)
d. All contractor employees with need for a Common Access Card (CAC) must have an active Defense
Information System for Security (DISS) profile.
e. Common Access Card (CAC)
f. DISS Visit Request submitted (Contingent upon classification of work being performed, Confidential, Secret, Top Secret).
Note (1): Invoicing by the contractor will begin as of the commencement of the performance period of services and no reimbursement will be paid by the government for efforts expended during the start-up period.
Note (2): Foreign Nationals are not allowed access to the functional/system side of Enterprise Resource Planning
(ERP).
ACCESS TO DOD INFORMATION TECHNOLOGY (IT) SYSTEM
In accordance with DON CIO Memorandum (IT LEVEL DESIGNATION ON DD FORM 2875 SYSTEM AUTHORIZATION ACCESS REQUEST) 08 September 2020, contractor employees who require access to Department of the Navy (DoN) or DoD networks are categorized as Privileged, Enhanced, or Authorized users. All user level accesses may include positions which require access to Controlled Unclassified Information (CUI). CUI includes sensitive information protected under the Privacy Act, to include Protected Health Information (PHI). IT System levels are determined by the requiring activity's Command Information System Security Manager (ISSM)/Information Assurance Manager (IAM).
Contractor employees requiring privileged access, (when specified by the terms of the contract) require a Tier 5 (T5) or T5R equivalent investigation, which is a higher level investigation than the Tier 3 (T3) and T3R described below.
Due to the privileged system access, an investigation suitable for High Risk national security positions is required.
Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance (IA) Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.
Contractors requiring Enhanced access, (when specified by the terms of the contract) require a T3, T3R, or equivalent investigation, which is a higher level investigation than the Tier 1 (T1) described below. Due to the enhanced system access, an investigation suitable for Moderate Risk national security positions is required.
Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee's duties, such employees shall in-process with the Navy CSM and ISSM/IAM manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy IT resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the Contracting Officers Representative (COR) shall sign the SAAR-N as the supervisor.
The SAAR-N shall be forwarded to the CSM upon contractor employee acquiring a Common Access Card (CAC) credential. Failure to obtain a CAC credential may result in delaying the individual's start date.
When required to maintain access to required IT systems or networks, the contractor shall ensure that all contractor employees requiring access complete annual Cyber Awareness training, and maintain a current requisite background investigation. The contractor's security representative shall contact the CSM for guidance when reinvestigations are required.
INTERIM ACCESS
The CSM may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.
DENIAL OR TERMINATION OF ACCESS
The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.
ACCESS TO CONTROLLED UNCLASSIFIED INFORMATION
Safeguarding sensitive unclassified…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .