1.03 8601640B_Redacted.pdf

This is a Vendor Item Control Drawing for a multi-use item with control number 8601640. The drawing specifies a recycled high-density polyethylene (HDPE) material requirement with detailed technical properties defined by ASTM standards. The material must meet specific mechanical characteristics including density/specific gravity of 0.7084 g/cm³, water absorption of ≤0.1%, compression-secant modulus of 104,420 psi, compression stress at 5% strain of 1,999 psi, flexure-secant modulus of 133,595 psi, fastener pullout failure load of 1,522 lbs, fastener shear maximum load of 789 lbs, coefficient of friction for embossed dry rubber of 0.80, and thermal expansion specifications.

The drawing provides dimensional specifications for the item with detailed measurements including a total length of 19.00 inches with 2024 chamfers at 2 places, width specifications of 3.60 inches and 3.00 inches, and depth specifications of 15,000, 6,500, and 3,000 measurements. The document is marked for distribution statement A with unlimited public release and distribution. The material specification is identified as Material Code 7Y365 with part number 8601640, and the cognizant activity cage code is D461.3. Flame speed is classified as CLASS C per ASTM standards.