Draft-Statement Of Work.pdf

STATEMENT OF WORK

ML-6697A Vacuum Tube rebuild service

Naval Computer and Telecommunications Area, Master Station Detachment Cutler (NCTAMS LANT Det. Cutler)

175 Ridge Road, Building 100 Cutler, ME 04626

1.0 Introduction

This Statement of Work (SOW) defines the requirement for the rebuild of Vacuum Tubes; the contractor shall furnish all necessary labor, tools, equipment and transportation for the rebuild of the 10 (ten) ML-6697A Vacuum Tubes in support of Naval Computer and Telecommunications Area, Master Station Detachment Cutler (NCTAMS LANT Det.

Cutler).

2.0 Background and General Information

Naval Computer and Telecommunications Area, Master Station Detachment Cutler (NCTAMS LANT Det. Cutler) located in Cutler Maine has a procurement for the rebuild of 10 (ten) ML-6697A Vacuum Tubes.

Delivery Date

14 weeks ADC (After Date of Contract)

3.0 Period of Performance: The period of performance for this requirement is as follows:

Performance Period Period of Performance Base Year 01 October 2024-30 September 2025

Option Year 1 01 October 2025-30 September 2026 Option Year 2 01 October 2026-30 September 2027 Option Year 3 01 October 2027-30 September 2028 Option Year 4 01 October 2029-30 September 2030

4.0 Requirements/Scope

4.1 The contractor shall furnish all necessary labor, tools, equipment and transportation to rebuild and deliver10

(ten) ML-6697A Vacuum tubes to meet original specifications.

4.2 NCTAMS LANT shall ship 10 (ten) ML-6697A Vacuum Tubes for rebuild services to the awarded vendor within 20 days ADC (After Date of Contract).

4.3 The contractor shall warranty all 10 (ten) rebuilt ML-6697A Vacuum tubes for no less than 3,000 operational hours as recorded by the AN/FRT-31 transmitter.

4.4 In the event that any ML-6697A Vacuum tube is beyond reparability, the contractor shall contact the POC located in section “5.0” in order to request an addition ML-6697A Vacuum tube to be sent to the contactor’s location for rebuild services.

4.5 In the event that any ML-6697A Vacuum tube is to be replaced, NCTAMS LANT shall ship the replacement within 10 days after official notification that a Vacuum tube is beyond reparability.

4.6 Upon completion of the rebuild of the 10 (ten) ML-6697A Vacuum tubes, the contractor shall palletize for shipment to the location at section “6.0”.

4.7 Each pallet of ML-6697A Vacuum tubes shall have Tilt and G-Force/Impact sensors attached. In the event that the attached sensors indicate excessive force or tilting, or if there is visible damage to packaging that has occurred during shipping, the shipment shall be refused and returned to originator for inspection, testing and verification of the operational condition of the tubes, at the originator’s expense and then shipped to the delivery location in section “6.0”.

5.0 Point of Contact:

[POC]-NCTAMS LANT

Telephone: [POC Telephone] Email: [POC Email]

6.0 Shipping Address:

NCTAMS LANT Det. Cutler Attn: [POC] 175 Ridge Road, Building 100 Cutler, ME 04626