N0018919Q0184-Solicitation_(Amendment_01).docx

N0018919Q0184

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 17-Sep-2019 12:00 PM to 19-Sep-2019 12:00 PM.

The following have been added by full text:

LAB LOCATIONS

FY2020 Activities List Updated August 2019

As documented in the Activities List below, the Navy has 4 asbestos testing laboratories participating in both the asbestos fiber counting and the asbestos bulk ID proficiency testing programs. There are 15 additional laboratories participating in bulk ID proficiency testing programs only. There are 2 laboratories participating in asbestos fiber counting only (one of these is new to NMCPHC contract for FY2020).

The total number of laboratories participating on one or both of these proficiency testing programs is 21. To summarize, 19 Bulk ID test sample sets will be sent out quarterly and 6 Fiber Counting test sample sets will be sent out quarterly.

Table Explanation:

BULK ID LAB NO. ######” : Lab will be participating in the AIHA Bulk ID program for FY2020.

BULK ID LAB NO. – NONE” : Lab will NOT be participating in AIHA Bulk ID program for FY2020.

BULK ID LAB NO. and FIBER COUNTING LAB NO. – ###### : Lab will be participating in both the AIHA Bulk ID program and AIHA Fiber Counting program for FY2020 FIBER COUNTING LAB NO. ######” : Lab is currently enrolled in AIHA Fiber Counting program and will continue in FY2020.

“FIBER COUNTING LAB NO.-NONE” : Lab will NOT be participating in AIHA Fiber Counting program for FY2020.

**POC information will be furnished for each location at time of award**

Lab mailing addresses are where the PAT program samples should be mailed 1.

BULK ID LAB NO. 215048

FIBER COUNTING LAB NO. - NONE

US Naval Ship Repair Facility Sasebo

ATTN:

Code S106.1, BLDG 480, 3rd Floor Tategami-cho, Sasebo, 857-0063 Japan

Phone: 011-81-956-50-2872 2.

BULK ID LAB NO. and

FIBER COUNTING LAB NO. 102074

Captain James A. Lovell Federal Health Care Center

ATTN:

Industrial Hygiene Division 3001 Green Bay Road, Building 81-H North Chicago, IL 60064-3048

Phone: 847-688-2888 ext.

3.

BULK ID LAB NO. and

FIBER COUNTING LAB NO. 102153

COMMANDING OFFICER

U.S. NAVAL HOSPITAL YOKOSUKA

ATTN:

1 Banchi Tamari-cho, Yokosuka-shi Kanagawa-ken 238-0041 Japan

011-81-468-755

4.

BULK ID LAB NO. 215051

FIBER COUNTING LAB NO. – NONE

COMMANDING OFFICER

U.S. NAVAL HOSPITAL OKINAWA

ATTN: Industrial Hygiene Department, DPH PSC 482 Box 1600

FPO AP 96362-9998

5.

BULK ID LAB NO. and

FIBER COUNTING LAB NO. 102133

COMMANDING OFFICER

U.S. NAVAL HOSPITAL GUAM

ATTN:

Industrial Hygiene Department PSC 455, Box 208

FPO AP 96540-1600

6.

BULK ID LAB NO. 215052

FIBER COUNTING LAB NO. – NONE

Naval Health Clinic Charleston

ATTN:

Industrial Hygiene 06IH 110 NNPTC Circle Goose Creek, SC 29445-6314

Phone:

7.

BULK ID LAB NO. 215111

FIBER COUNTING LAB NO. – NONE

COMMANDING OFFICER

USS DWIGHT D EISENHOWER (CVN 69)

ATTN:

SAFETY DEPARTMENT

FPO AE 09532-2830

8.

BULK ID LAB NO. 215113

FIBER COUNTING LAB NO. – NONE

NAVAL HOSPITAL JACKSONVILLE

ATTN:

INDUSTRIAL HYGIENE DEPARTMENT

PO Box 8

JACKSONVILLE, FL 32212-0008

9.

BULK ID LAB NO. 215114

FIBER COUNTING LAB NO. – NONE

BRANCH HEALTH CLINIC KINGS BAY

ATTN:

INDUSTRIAL HYGIENE

881 USS JAMES MADISON RD

KINGS BAY, GA 31547-2531

10.

BULK ID LAB NO. 102174

FIBER COUNTING LAB NO. - NONE

Environmental Department - Yuma Attn:

MCAS Box 99110 Yuma AZ, 85369-9110

11.

BULK ID LAB NO. 215116

FIBER COUNTING LAB NO. – NONE

US Navy NAVFAC FAR EAST

ATTN:

Environmental Laboratory Bldg. 2043, 3F Yokosuka, Japan 238-0041

011-81-46-816-7557(V)

315-243-7557 (DSN)

12.

BULK ID LAB NO. 215127

FIBER COUNTING LAB NO. – NONE

NAVIMFAC PACNORWEST

ATTN:

7000 FINBACK CIRCLE RD

BLDG 7000

SILVERDALE, WA 98315-7002

13.

BULK ID LAB NO. 215128

FIBER COUNTING LAB NO. – NONE

NAVAL HOSPITAL OAK HARBOR

ATTN:

INDUSTRIAL HYGIENE DEPT CODE 06IH00

3475 NORTH SARATOGA ST

OAK HARBOR, WA 98278

Phone:

14.

BULK ID LAB NO. 215172

FIBER COUNTING LAB NO. – NONE

Commander Norfolk Naval Shipyard

ATTN:

INDUSTRIAL LAB, CODE 13411

BUILDING 184, 3RD FLOOR, Room 357

PORTSMOUTH, VA 23709-5000

15.

BULK ID LAB NO. 215225

FIBER COUNTING LAB NO. – NONE

COMMANDER

NAVAL SHIPYARD PUGET SOUND

ATTN:

ENVIR CHEM BRANCH CODE 134, Building 59 1400 FARRAGUT AVE, Stop 2025

BREMERTON, WA 98314

BULK ID LAB NO. 215228

FIBER COUNTING LAB NO. – NONE

Commander (Code 106.11) Pearl Harbor Naval Shipyard & IMF 667 Safeguard Street, Suite 100

PEARL HARBOR, HI 96860-5033

16.

BULK ID LAB NO. 215226

FIBER COUNTING LAB NO. – NONE

Portsmouth Naval Shipyard

ATTN:

OSHE OFFICE CODE 10610

BUILDING 44

PORTSMOUTH, NH 03804-5000

17.

BULK ID LAB NO. 215227

FIBER COUNTING LAB NO. – NONE

COMMANDING OFFICER

ATTN:

NAVY SHIP REPAIR FACILITY YOKOSUKA

Building #2043, 3rd Floor, 1-Banchi, Tomari-cho Yokosuka-city, Kanagawa 238-0001 Japan

18.

BULK ID LAB NO. and

FIBER COUNTING LAB NO. – 227122

US Naval Hospital Guantanamo Bay Cuba

ATTN:

Industrial Hygiene Officer PSC 810 Box 148

FPO AE 09589

19.

BULK ID LAB NO. NONE

FIBER COUNTING LAB NO. – 102786

COMMANDING OFFICER

ATTN:

Safety Office Code 106.21

NAVY SHIP REPAIR FACILITY YOKOSUKA

PSC 473 Box 8

FPO AP 96349-0008

20.

BULK ID LAB NO. 215110

FIBER COUNTING LAB NO. – NONE

COMMANDING OFFICER

USS Nimitz

ATTN: SAFETY DEPARTMENT

Unit 100103 Box #5018

FPO AP 96620

21. NEW TO OUR CONTRACT

BULK ID LAB NO. NONE

FIBER COUNTING LAB NO. – 100559

Commander Norfolk Naval Shipyard Attn: Code 106.21 Bldg. M22

PORTSMOUTH, VA 23709-5000

WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4341 Daniel W. Simms Division of | Revision No.: 12 Director Wage Determinations| Date Of Last Revision: 08/15/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: North Carolina Virginia Area: North Carolina Counties of Currituck Gates Virginia Counties of Chesapeake Gloucester Hampton Isle of Wight James City Mathews Newport News Norfolk Poquoson Portsmouth Suffolk Virginia Beach Williamsburg York **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.87 01012 - Accounting Clerk II 16.69 01013 - Accounting Clerk III 18.68 01020 - Administrative Assistant 25.61 01035 - Court Reporter 20.70 01041 - Customer Service Representative I 11.79 01042 - Customer Service Representative II 13.27 01043 - Customer Service Representative III 14.47 01051 - Data Entry Operator I 13.29 01052 - Data Entry Operator II 14.50 01060 - Dispatcher Motor Vehicle 18.91 01070 - Document Preparation Clerk 14.21 01090 - Duplicating Machine Operator 14.21 01111 - General Clerk I 12.42 01112 - General Clerk II 13.78 01113 - General Clerk III 15.47 01120 - Housing Referral Assistant 19.51 01141 - Messenger Courier 14.07 01191 - Order Clerk I 15.44 01192 - Order Clerk II 17.61 01261 - Personnel Assistant (Employment) I 16.22 01262 - Personnel Assistant (Employment) II 18.14 01263 - Personnel Assistant (Employment) III 20.23 01270 - Production Control Clerk 28.37 01290 - Rental Clerk 14.15 01300 - Scheduler Maintenance 15.65 01311 - Secretary I 15.65 01312 - Secretary II 17.51 01313 - Secretary III 19.51 01320 - Service Order Dispatcher 16.90 01410 - Supply Technician 25.61 01420 - Survey Worker 14.75 01460 - Switchboard Operator/Receptionist 13.12 01531 - Travel Clerk I 14.77 01532 - Travel Clerk II 15.77 01533 - Travel Clerk III 16.72 01611 - Word Processor I 14.84 01612 - Word Processor II 16.67 01613 - Word Processor III 18.65 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 25.82 05010 - Automotive Electrician 21.33 05040 - Automotive Glass Installer 20.22 05070 - Automotive Worker 20.22 05110 - Mobile Equipment Servicer 18.23 05130 - Motor Equipment Metal Mechanic 22.39 05160 - Motor Equipment Metal Worker 20.22 05190 - Motor Vehicle Mechanic 22.39 05220 - Motor Vehicle Mechanic Helper 17.17 05250 - Motor Vehicle Upholstery Worker 19.21 05280 - Motor Vehicle Wrecker 20.22 05310 - Painter Automotive 21.33 05340 - Radiator Repair Specialist 20.22 05370 - Tire Repairer 13.84 05400 - Transmission Repair Specialist 22.39 07000 - Food Preparation And Service Occupations 07010 - Baker 12.60 07041 - Cook I 13.74 07042 - Cook II 15.24 07070 - Dishwasher 9.12 07130 - Food Service Worker 10.29 07210 - Meat Cutter 17.87 07260 - Waiter/Waitress 11.05 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.23 09040 - Furniture Handler 14.67 09080 - Furniture Refinisher 21.23 09090 - Furniture Refinisher Helper 15.80 09110 - Furniture Repairer Minor 17.62 09130 - Upholsterer 20.17 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.41 11060 - Elevator Operator 11.92 11090 - Gardener 15.60 11122 - Housekeeping Aide 11.92 11150 - Janitor 11.92 11210 - Laborer Grounds Maintenance 13.01 11240 - Maid or Houseman 9.78 11260 - Pruner 12.04 11270 - Tractor Operator 14.70 11330 - Trail Maintenance Worker 13.01 11360 - Window Cleaner 12.64 12000 - Health Occupations 12010 - Ambulance Driver 16.84 12011 - Breath Alcohol Technician 16.99 12012 - Certified Occupational Therapist Assistant 30.26 12015 - Certified Physical Therapist Assistant 28.62 12020 - Dental Assistant 18.88 12025 - Dental Hygienist 35.86 12030 - EKG Technician 29.13 12035 - Electroneurodiagnostic Technologist 29.13 12040 - Emergency Medical Technician 16.84 12071 - Licensed Practical Nurse I 16.04 12072 - Licensed Practical Nurse II 17.95 12073 - Licensed Practical Nurse III 20.00 12100 - Medical Assistant 14.95 12130 - Medical Laboratory Technician 22.63 12160 - Medical Record Clerk 15.85 12190 - Medical Record Technician 17.74 12195 - Medical Transcriptionist 16.73 12210 - Nuclear Medicine Technologist 34.61 12221 - Nursing Assistant I 11.33 12222 - Nursing Assistant II 12.73 12223 - Nursing Assistant III 13.89 12224 - Nursing Assistant IV 15.59 12235 - Optical Dispenser 22.35 12236 - Optical Technician 18.25 12250 - Pharmacy Technician 17.33 12280 - Phlebotomist 16.34 12305 - Radiologic Technologist 27.28 12311 - Registered Nurse I 24.37 12312 - Registered Nurse II 29.81 12313 - Registered Nurse II Specialist 29.81 12314 - Registered Nurse III 36.07 12315 - Registered Nurse III Anesthetist 36.07 12316 - Registered Nurse IV 43.23 12317 - Scheduler (Drug and Alcohol Testing) 22.23 12320 - Substance Abuse Treatment Counselor 23.71 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.46 13012 - Exhibits Specialist II 25.36 13013 - Exhibits Specialist III 29.19 13041 - Illustrator I 21.91 13042 - Illustrator II 27.02 13043 - Illustrator III 32.78 13047 - Librarian 32.67 13050 - Library Aide/Clerk 13.04 13054 - Library Information Technology Systems 26.20 Administrator 13058 - Library Technician 16.78 13061 - Media Specialist I 20.45 13062 - Media Specialist II 22.87 13063 - Media Specialist III 25.49 13071 - Photographer I 13.93 13072 - Photographer II 20.31 13073 - Photographer III 24.67 13074 - Photographer IV 27.39 13075 - Photographer V 31.46 13090 - Technical Order Library Clerk 16.38 13110 - Video Teleconference Technician 20.16 14000 - Information Technology Occupations 14041 - Computer Operator I 15.56 14042 - Computer Operator II 17.40 14043 - Computer Operator III 19.41 14044 - Computer Operator IV 21.57 14045 - Computer Operator V 23.88 14071 - Computer Programmer I (see 1) 22.93 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.56 14160 - Personal Computer Support Technician 21.57 14170 - System Support Specialist 27.64 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.24 15020 - Aircrew Training Devices Instructor (Rated) 40.21 15030 - Air Crew Training Devices Instructor (Pilot) 48.04 15050 - Computer Based Training Specialist / Instructor 33.24 15060 - Educational Technologist 35.09 15070 - Flight Instructor (Pilot) 48.04 15080 - Graphic Artist 24.28 15085 - Maintenance Test Pilot Fixed Jet/Prop 39.14 15086 - Maintenance Test Pilot Rotary Wing 39.14 15088 - Non-Maintenance Test/Co-Pilot 39.14 15090 - Technical Instructor 25.94 15095 - Technical Instructor/Course Developer 31.73 15110 - Test Proctor 20.94 15120 - Tutor 20.94 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.35 16030 - Counter Attendant 9.35 16040 - Dry Cleaner 11.99 16070 - Finisher Flatwork Machine 9.35 16090 - Presser Hand 9.35 16110 - Presser Machine Drycleaning 9.35 16130 - Presser Machine Shirts 9.35 16160 - Presser Machine Wearing Apparel Laundry 9.35 16190 - Sewing Machine Operator 12.85 16220 - Tailor 13.77 16250 - Washer Machine 10.23 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.50 19040 - Tool And Die Maker 29.34 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.49 21030 - Material Coordinator 28.37 21040 - Material Expediter 28.37 21050 - Material Handling Laborer 12.63 21071 - Order Filler 12.57 21080 - Production Line Worker (Food Processing) 19.49 21110 - Shipping Packer 16.50 21130 - Shipping/Receiving Clerk 16.50 21140 - Store Worker I 13.50 21150 - Stock Clerk 17.08 21210 - Tools And Parts Attendant 19.49 21410 - Warehouse Specialist 19.49 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 33.98 23019 - Aircraft Logs and Records Technician 27.78 23021 - Aircraft Mechanic I 32.37 23022 - Aircraft Mechanic II 33.98 23023 - Aircraft Mechanic III 35.57 23040 - Aircraft Mechanic Helper 24.83 23050 - Aircraft Painter 30.84 23060 - Aircraft Servicer 27.78 23070 - Aircraft Survival Flight Equipment Technician 30.84 23080 - Aircraft Worker 29.23 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 29.23 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 32.37

II

23110 - Appliance Mechanic 19.24 23120 - Bicycle Repairer 21.03 23125 - Cable Splicer 28.38 23130 - Carpenter Maintenance 20.83 23140 - Carpet Layer 23.32 23160 - Electrician Maintenance 23.77 23181 - Electronics Technician Maintenance I 24.29 23182 - Electronics Technician Maintenance II 25.63 23183 - Electronics Technician Maintenance III 26.90 23260 - Fabric Worker 22.17 23290 - Fire Alarm System Mechanic 21.51 23310 - Fire Extinguisher Repairer 21.03 23311 - Fuel Distribution System Mechanic 30.24 23312 - Fuel Distribution System Operator 24.64 23370 - General Maintenance Worker 18.30 23380 - Ground Support Equipment Mechanic 32.37 23381 - Ground Support Equipment Servicer 27.78 23382 - Ground Support Equipment Worker 29.23 23391 - Gunsmith I 21.03 23392 - Gunsmith II 23.32 23393 - Gunsmith III 25.83 23410 - Heating Ventilation And Air-Conditioning 23.92 Mechanic 23411 - Heating Ventilation And Air Contidioning 25.11 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 24.92 23440 - Heavy Equipment Operator 20.20 23460 - Instrument Mechanic 27.39 23465 - Laboratory/Shelter Mechanic 18.15 23470 - Laborer 12.63 23510 - Locksmith 23.94 23530 - Machinery Maintenance Mechanic 25.63 23550 - Machinist Maintenance 25.31 23580 - Maintenance Trades Helper 16.29 23591 - Metrology Technician I 27.39 23592 - Metrology Technician II 28.75 23593 - Metrology Technician III 30.10 23640 - Millwright 27.56 23710 - Office Appliance Repairer 25.03 23760 - Painter Maintenance 20.11 23790 - Pipefitter Maintenance 24.18 23810 - Plumber Maintenance 23.04 23820 - Pneudraulic Systems Mechanic 25.83 23850 - Rigger 25.83 23870 - Scale Mechanic 23.32 23890 - Sheet-Metal Worker Maintenance 25.57 23910 - Small Engine Mechanic 20.11 23931 - Telecommunications Mechanic I 29.09 23932 - Telecommunications Mechanic II 30.54 23950 - Telephone Lineman 31.45 23960 - Welder Combination Maintenance 24.51 23965 - Well Driller 25.83 23970 - Woodcraft Worker 25.83 23980 - Woodworker 21.03 24000 - Personal Needs Occupations 24550 - Case Manager 14.34 24570 - Child Care Attendant 9.99 24580 - Child Care Center Clerk 13.48 24610 - Chore Aide 9.29 24620 - Family Readiness And Support Services 14.34 Coordinator 24630 - Homemaker 14.34 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.86 25040 - Sewage Plant Operator 20.85 25070 - Stationary Engineer 24.86 25190 - Ventilation Equipment Tender 19.08 25210 - Water Treatment Plant Operator 20.85 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.40 27007 - Baggage Inspector 14.76 27008 - Corrections Officer 20.02 27010 - Court Security Officer 21.65 27030 - Detection Dog Handler 16.52 27040 - Detention Officer 20.02 27070 - Firefighter 23.28 27101 - Guard I 14.76 27102 - Guard II 16.52 27131 - Police Officer I 22.35 27132 - Police Officer II 24.84 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.13 28042 - Carnival Equipment Repairer 11.81 28043 - Carnival Worker 9.04 28210 - Gate Attendant/Gate Tender 14.30 28310 - Lifeguard 12.22 28350 - Park Attendant (Aide) 15.60 28510 - Recreation Aide/Health Facility Attendant 11.68 28515 - Recreation Specialist 19.83 28630 - Sports Official 12.75 28690 - Swimming Pool Operator 15.63 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.82 29020 - Hatch Tender 26.82 29030 - Line Handler 26.82 29041 - Stevedore I 25.49 29042 - Stevedore II 28.29 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 38.78 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 26.74 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45 30021 - Archeological Technician I 18.85 30022 - Archeological Technician II 21.09 30023 - Archeological Technician III 25.14 30030 - Cartographic Technician 26.68 30040 - Civil Engineering Technician 28.34 30051 - Cryogenic Technician I 25.67 30052 - Cryogenic Technician II 28.36 30061 - Drafter/CAD Operator I 18.85 30062 - Drafter/CAD Operator II 21.09 30063 - Drafter/CAD Operator III 23.52 30064 - Drafter/CAD Operator IV 28.93 30081 - Engineering Technician I 17.82 30082 - Engineering Technician II 19.79 30083 - Engineering Technician III 22.59 30084 - Engineering Technician IV 27.42 30085 - Engineering Technician V 33.54 30086 - Engineering Technician VI 40.58 30090 - Environmental Technician 24.06 30095 - Evidence Control Specialist 22.05 30210 - Laboratory Technician 21.99 30221 - Latent Fingerprint Technician I 24.47 30222 - Latent Fingerprint Technician II 27.02 30240 - Mathematical Technician 26.68 30361 - Paralegal/Legal Assistant I 18.72 30362 - Paralegal/Legal Assistant II 23.19 30363 - Paralegal/Legal Assistant III 28.38 30364 - Paralegal/Legal Assistant IV 34.32 30375 - Petroleum Supply Specialist 26.97 30390 - Photo-Optics Technician 26.68 30395 - Radiation Control Technician 26.97 30461 - Technical Writer I 24.00 30462 - Technical Writer II 29.36 30463 - Technical Writer III 35.52 30491 - Unexploded Ordnance (UXO) Technician I 24.65 30492 - Unexploded Ordnance (UXO) Technician II 29.82 30493 - Unexploded Ordnance (UXO) Technician III 35.74 30494 - Unexploded (UXO) Safety Escort 24.65 30495 - Unexploded (UXO) Sweep Personnel 24.65 30501 - Weather Forecaster I 28.02 30502 - Weather Forecaster II 30.99 30620 - Weather Observer Combined Upper Air Or (see 2) 23.52 Surface Programs 30621 - Weather Observer Senior (see 2) 25.48 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.82 31020 - Bus Aide 14.46 31030 - Bus Driver 18.27 31043 - Driver Courier 13.40 31260 - Parking and Lot Attendant 10.66 31290 - Shuttle Bus Driver 14.22 31310 - Taxi Driver 12.65 31361 - Truckdriver Light 14.22 31362 - Truckdriver Medium 15.59 31363 - Truckdriver Heavy 18.75 31364 - Truckdriver Tractor-Trailer 18.75 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.54 99030 - Cashier 9.20 99050 - Desk Clerk 9.92 99095 - Embalmer 30.76 99130 - Flight Follower 24.65 99251 - Laboratory Animal Caretaker I 13.04 99252 - Laboratory Animal Caretaker II 13.84 99260 - Marketing Analyst 28.59 99310 - Mortician 30.76 99410 - Pest Controller 17.48 99510 - Photofinishing Worker 12.53 99710 - Recycling Laborer 19.23 99711 - Recycling Specialist 21.72 99730 - Refuse Collector 17.64 99810 - Sales Clerk 11.04 99820 - School Crossing Guard 15.63 99830 - Survey Party Chief 21.69 99831 - Surveying Aide 13.54 99832 - Surveying Technician 19.72 99840 - Vending Machine Attendant 16.41 99841 - Vending Machine Repairer 19.31 99842 - Vending Machine Repairer Helper 16.41 Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 12017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month* *This rate is to be used only when compensating employees for performance on an SCA covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 8 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination. Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity toordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges. A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS ** The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) ** Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S. Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)). Information required by the Regulations must be submitted on SF-1444 or bond paper. When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

The following have been modified:

PERFORMANCE WORK STATEMENT

Performance Work Statement (PWS) Asbestos Proficiency Analytical Testing Contract FY2020

SECTION 1-BACKGROUND

Procure asbestos proficiency analytical testing (PAT) programs in support of various U.S Navy activities. The AIHA’s asbestos Industrial Hygiene (IH) PAT program (asbestos fiber counting) and the Bulk Asbestos (BA) PAT program (asbestos bulk identification) provide U.S. Navy field asbestos testing laboratories with test samples of known concentration and/or known type and percentage of asbestos that are needed to acquire, check, and maintain the laboratories’ proficiency in asbestos analyses.

SECTION 2-SCOPE

Participation in the AIHA asbestos PAT program(s) is required by the OPNAVINST 5100.23G, Navy Safety and Occupational Health Program Manual. Chapter 3, Section 0305. Paragraph d.(6)(e)4. of the instruction states that “[r]egions and activities with a local asbestos laboratory shall enroll it in the proficiency analytical testing (PAT) program operated by the AIHA” and that these “…laboratories may only perform asbestos analyses when they have achieved proficient ratings in each of the testing programs”. By performing analytical sample testing using AIHA’s IHPAT and/or BAPAT program(s), the laboratory demonstrates microscope and analyst proficiency and successful participation in these programs complies with the requirement in OPNAVINST 5100.23G.

OPNAVINST 5100.19F, Navy Safety and Occupational Health (SOH) Program Manual for Forces Afloat Section A, Chapter 2, Paragraph 3.c.(18)(b) requires that ships “participate in and demonstrate proficiency in asbestos laboratory quality assurance programs as required by TYCOM” and AIHA’s BAPAT program satisfies that requirement.

Without these required services, the U.S. Navy field asbestos testing laboratories cannot analyze asbestos samples to provide critical support to line commands needed to protect the safety and health of the U.S. Navy active duty and civilian personnel. A “proficient” rating in these program(s) must be achieved and maintained by participating laboratories in order to maintain mission readiness.

The AIHA is a non-profit organization that provides proficiency testing samples and administration of these programs for industrial hygiene laboratories (i.e., U.S. Navy laboratories, other DOD laboratories, private laboratories, and OSHA laboratories). These proficiency testing programs validate laboratory methods and analytical results provided to U.S. Navy customers and ensures that all U.S. Navy laboratories, CONUS and OCONUS, are held to the same standard.

SECTION 3- SPECIFIC DUTIES/TASKS

Product Intended Use: Contractor shall provide the necessary personnel, materials, facilities and technical services to prepare and mail out the appropriate AIHA asbestos PAT program samples to participating U.S. Navy field asbestos testing laboratories based on the asbestos PAT program(s) in which the individual laboratories are enrolled. See the charts for number of participating laboratories, samples per round, test rounds, and mailing dates.

AIHA Asbestos PAT samples are for the counting of asbestos fibers and/or bulk asbestos identification. Asbestos IHPAT samples are samples of known concentration of asbestos fibers. The AIHA asbestos IHPAT program serves as an external quality assurance program for laboratories analyzing air samples for asbestos by fiber counting. It is designed to assist a laboratory improve its analytical performance by providing audit samples on a quarterly basis, evaluating the participating laboratory’s results, and providing a report on how well the participating laboratory performed. BAPAT samples are materials with asbestos fibers of known type and percentage of asbestos contained within. The AIHA BAPAT program serves as an external quality assurance program for laboratories identifying and quantifying asbestos type in bulk building materials. It is designed to provide bulk audit samples on a quarterly basis, and to provide a means by which a laboratory can evaluate its ability to characterize bulk materials for the type and percentage of asbestos. This program is both qualitative and semi-quantitative in nature.

Asbestos IHPAT Samples are fiber counted by phase contract microscopy (PCM) and BAPAT identification and quantification is done by polarized light microscopy (PLM) at the U.S. Navy field asbestos testing laboratories by their trained employees. These laboratories will submit their PAT sample results back to the contractor for grading.

The contractor will grade the U.S Navy field asbestos testing laboratories’ performance based on the number of acceptable results in each test round for each type of analyte. The contractor will then determine if the laboratories are proficient in fiber counting and/or bulk sample analysis. Based on the contractor’s grading criteria and past performance of the particular laboratory, each laboratory will receive a PROFICIENT or NON-PROFICIENCT grade. Only those laboratories graded as PROFICIENT are able to analyze asbestos samples from the field.

Test Sample Mail-out. Contractor shall provide the necessary personnel, materials, facilities and technical services to prepare and mail out Proficiency Analytical (PAT) Samples to 21 Navy field asbestos testing laboratories. The PAT samples are for the counting of asbestos fibers and/or bulk asbestos identification.

Fiber counting samples will be mailed out during the first week of Oct, Jan, Apr, and Jul. Four Test Samples will be sent to each participating laboratory per Test Round.

Bulk ID samples will be mailed out during the first week of Nov, Feb, May and Aug. Four Test Samples will be sent to each participating laboratory per Test Round.

The contractor will notify NMCPHC by email or phone of any Navy laboratory that tries to submit sample results after the cut-off date. The contractor will also notify NMCPHC of any laboratory that requested, and was granted, an extension.

FIBER COUNTING PROFICIENCY TESTING (IHPAT)

SCHEDULE FOR FY 2020 – 2024 WITH SIX-MONTH OPTION

1 OCT 2019

1 NOV 2019

1 JAN 2020

1 FEB 2020

15 FEB 2020

1 APR 2020

1 MAY 2020

15 MAY 2020

1 JUL 2020

1 AUG 2020

15 AUG 2020

1 OCT 2020

1 NOV 2020

1 JAN 2021

1 FEB 2021

15 FEB 2021

1 APR 2021

1 MAY 2021

15 MAY 2021

1 JUL 2021

1 AUG 2021

15 AUG 2021

1 OCT 2021

1 NOV 2021

1 JAN 2022

1 FEB 2022

15 FEB 2022

1 APR 2022

1 MAY 2022

15 MAY 2022

1 JUL 2022

1 AUG 2022

15 AUG 2022

1 OCT 2022

1 NOV 2022

1 JAN 2023

1 FEB 2023

15 FEB 2023

1 APR 2023

1 MAY 2023

15 MAY 2023

1 JUL 2023

1 AUG 2023

15 AUG 2023

1 OCT 2023

1 NOV 2023

1 JAN 2024

1 FEB 2024

15 FEB 2024

1 APR 2024

1 MAY 2024

15 MAY 2024

1 JUL 2024

1 AUG 2024

15 AUG 2024

1 OCT 2024

1 NOV 2024

1 JAN 2025

1 FEB 2025

15 FEB 2025

Round Number is the sequential number given to each quarterly group of samples. Twenty-two rounds (i.e., Round numbers 219 through 240) are scheduled to be sent during the next five and a half years.

Mail-out Date is the day the contractor mails the proficiency testing samples (i.e., one round) to the participating laboratories.

Return Date is the date sample results are to be received by the contractor (electronically) from the participating laboratories.

Report Date is the date the customer’s proficiency report is prepared by the contractor for the participating laboratories.

Copies of finalized Summary Reports will be forwarded to NMCPHC on the scheduled date of distribution of the Lab Reports to program participants.

BULK IDENTIFICATION PROFICIENCY TESTING (BAPAT)

SCHEDULE FOR FY 2020 – 2024 WITH SIX-MONTH OPTION

15 NOV 2019

17 DEC 2019

15 FEB 2020

15 MAR 2020

10 APR 2020

15 MAY 2020

15 JUN 2020

10 JUL 2020

15 AUG 2020

15 SEP 2020

10 OCT 2020

15 NOV 2020

15 DEC 2020

15 FEB 2021

15 MAR 2021

10 APR 2021

15 MAY 2021

15 JUN 2021

10 JUL 2021

15 AUG 2021

15 SEP 2021

10 OCT 2021

15 NOV 2021

15 DEC 2021

15 FEB 2022

15 MAR 2022

10 APR 2022

15 MAY 2022

15 JUN 2022

10 JUL 2022

15 AUG 2022

15 SEP 2022

10 OCT 2022

15 NOV 2022

15 DEC 2022

15 FEB 2023

15 MAR 2023

10 APR 2023

15 MAY 2023

15 JUN 2023

10 JUL 2023

15 AUG 2023

15 SEP 2023

10 OCT 2023

15 NOV 2023

15 DEC 2023

15 FEB 2024

15 MAR 2024

10 APR 2024

15 MAY 2024

15 JUN 2024

10 JUL 2024

15 AUG 2024

15 SEP 2024

10 OCT 2024

15 NOV 2024

15 DEC 2024

15 FEB 2025

15 MAR 2025

10 APR 2025

Round Number is the sequential number given to each quarterly group of samples. Twenty-two rounds (i.e., Round numbers 121 through 142) are scheduled to be sent during the next five and a half years.

Mail-out Date is the day the contractor mails the proficiency testing samples (i.e., one round) to the participating laboratories.

Return Date is the date sample results are to be received by the contractor (electronically) from the participating laboratories.

Report Date is the date the customer’s proficiency report is prepared by the contractor for the participating laboratories.

Copies of finalized Summary Reports will be forwarded to NMCPHC on the scheduled date of distribution of the Lab Reports to program participants.

SECTION 4- NON-PERSONAL SERVICES STATEMENT

Contractor employees performing services under this contract will be controlled, directed, and supervised at all times by management personnel of the Contractor. Contractor management will ensure that employees comply with the performance work standards outlined in this PWS. Contractor employees will perform their duties independent of, and without the supervision of, any Government official. The tasks, duties and responsibilities set forth in the task may not be interpreted or implemented in any manner that results in any Contractor employee creating or modifying Federal policy, obligating the appropriated funds of the United States Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee, otherwise violating the prohibitions set forth in Subparts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR) http://farsite.hill.af.mil/vffar1.htm. The Government shall control access to the facility and shall perform the inspection and acceptance of completed work.

SECTION 5- IDENTIFICATION REQUIREMENTS

All contractor personnel performing under this performance work statement shall identify themselves as a contractor employee to avoid creating any impression that they are Government officials. Such identification shall be made in all meetings attended, when answering Government telephones, on all e-mails, and when working in other situations where their contractor status is not obvious to third parties. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.

SECTION 6- ACCEPTANCE PLAN

The Contracting Officer’s Representative (COR) performs inspection and acceptance on all data and non-data deliverables in accordance with the Quality Assurance Surveillance Plan (QASP)/QASP Matrix.

SECTION 7- INFORMATION ASSURANCE/INFORMATION SECURITY

The Contractor shall protect DoD sensitive unclassified data regardless of the location or ownership of the transport media, including, but not limited to mobile computing devices and removable storage media, whether Government furnished or contractor owned/leased. Contractor shall comply with all current information assurance and information security policies, procedures, and statutes applicable to DoD information technology, including the July 3, 2007 DoD CIO Policy Memorandum on Encryption of Sensitive Unclassified Data at Rest on Mobile Computing Devices and Removable Storage Media.

SECTION 8– PRIVACY ACT COMPLIANCE

The contractor may be in contact with data and information subject to the Privacy Act of 1974 (Title 5 of the U.S. Code Section 552a). The contractor shall ensure that its employees assigned to this effort understand and adhere to the requirements of the Privacy Act and to Department of Defense and Department of the Navy regulations that implement the Privacy Act. Department of Navy policy and procedures implementing the Privacy Act are detailed in DoD Directive 5400.11 (DoD Privacy Program), available on-line at http://www.dtic.mil/whs/directives/ and in SECNAVINST 5211.5E (Department of the Navy Privacy Act (PA) Program), which is available on-line at http://privacy.navy.mil. The contractor shall identify and safeguard data, information and reports accordingly. In addition, the contractor shall ensure that contractor employees assigned to the contract are trained on properly identifying and handling data and information subject to the Privacy Act prior to commencing work.

SECTION 9– PROPRIETARY INFORMATION

No data provided to, or developed by, the contractor shall be used for any purpose other than the tasks assigned. All information (data files and hard copy) becomes the property of the Government and the contractor shall return them at the completion of the task. The Government shall not be required to pay royalties, recurring license fees, use tax or similar additional payments for any contractor-developed product or associated software presentation.

SECTION 10– Enterprise Contractor Manpower Reporting Application (ECMRA).

The contractor shall report contractor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) D, Automatic Data Processing and Telecommunications, IT and Telecom-Telecommunications Transmission (D304) and Internet (D322) ONLY;

(5) S, Utilities ONLY;

(6) V, Freight and Shipping ONLY.

The contractor is required to completely fill in all required data fields using the following web address…