N0018918Q0209_MTU_PWS.docx

DOCX document 28 KB Posted

Attached to
CRG ONE and CRG TWO Training Requirements: CM1/M and Smartline CE1/M Training Course and CM2/M and Smartline CE2/M Training Course
Solicitation number
N0018918Q0209
Issued by

About this file

From the source

N0018918Q0209_MTU_PWS.docx

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF WORK STATEMENT

PROVIDING

COASTAL RIVERINE GROUP ONE (CRG ONE)

COASTAL RIVERINE GROUP TWO (CRG TWO)

MTU TRAINING COURSE S2000-03 CM1/M & SMARTLINE CE1/M FOR OPERATORS

MTU TRAINING COURSE S2000-03 CM2/M & SMARTLINE CE2/M FOR ON-BOARD MAINTAINER AND SERVICE PERSONNEL April 2018

1.0 SCOPE.

1.1 Purpose. This Course is instruct both CRG ONE and CRG TWO students on the design and function of the MTU diesel engine and SmartLine System, how to operate and perform organizational preventative maintenance, how to identify and rectify minor faults, how to preform maintenance tasks as per the MTU instructions and how to replace engine subassemblies.

2.0 TASKS. The Contractor shall provide all necessary labor, equipment, tools and material to provide instruction:

2.1 Training Course S2000-03 CM1/M & SmartLine CE1/M for Operators

2.1.1 Engine Model: MTU America 2000-03 with SmartLine

2.1.2 Course Objectives: MTU authorized and certified instructors shall instruct students how to operate and perform organizational preventative maintenance, troubleshooting systems/component failures and how to perform corrective maintenance, replacing engine subassemblies, and identifying and rectifying minor faults. Upon completion, students shall be able to understand design and function of the diesel engine and the SmartLine system; be able to identify and rectify minor faults, and perform preventive tasks as per MTU instructions. The course will instruct a maximum of eight (8) students.

2.1.3 Course Curriculum Mechanic: The course curriculum shall provide students with knowledge in the following areas:

2.1.3.1 Handling of documentation
2.1.3.2 Design and function of the engine
2.1.3.3 Explanation of oil, fuel, systems, etc.
2.1.3.4 Basic Troubleshooting
2.1.3.5 Execution of preventive (QL 1) maintenance tasks

2.1.4 Course Curriculum Electronic: The course curriculum shall provide students with knowledge in the following areas:

2.1.4.1 Introduction of the scope of the electronics
2.1.4.2 System structure, design and operations
2.1.4.3 Handling of documentation
2.1.4.3.1 Explanation of sensor harness and diagrams
2.1.4.3.2 Explanation of sensor location and function

2.1.5. Course Duration: The course shall consist of four (4) working days of instruction. Two (2) days will be focused on Mechanics, and two (2) days will be focused on Electronics. Upon course completion, students will receive a certificate of completion.

2.2. Training Course S2000-03 CM1/M & SmartLine CE1/M for On-Board Maintainer & Service Personnel

2.2.1 Engine Model: MTU America 2000-03 with SmartLine

2.2.2 Course Objectives: MTU authorized and certified instructors shall instruct students how to operate and perform organizational preventative maintenance, troubleshooting systems/component failures and how to perform corrective maintenance, replacing engine subassemblies, and identifying and rectifying minor faults. Upon completion, students shall be able to understand design and function of the diesel engine and the SmartLine system; be able to identify and rectify minor faults, and perform preventive tasks as per MTU instructions. The course will instruct a maximum of eight (8) students.

2.2.3 Course Curriculum Mechanic: The course curriculum shall provide students with knowledge in the following areas:

2.2.3.1 Handling of documentation
2.2.3.2 Design and function of the engine
2.2.3.3 Explanation of oil, fuel, systems, etc.
2.2.3.4 Basic Troubleshooting
2.2.3.5 Execution of preventive (QL 1) maintenance tasks
2.2.3.6 Execution of preventive (QL 2) maintenance tasks

2.2.4 Course Curriculum Electronic: The course curriculum shall provide students with knowledge in the following areas:

2.2.4.1 Introduction of the scope of the electronics
2.2.4.2 System structure, design and operations
2.2.4.3 Handling of documentation
2.2.4.3.1 Explanation of sensor harness and diagrams
2.2.4.3.2 Explanation of sensor location and function
2.2.4.3.3 Explanation of Smartline monitoring system functions
2.2.4.3.4 Explanation of Governor (ECU-7) functions and parameters (Level 0)
2.2.4.3.5 Handling of the Diagnostic Software DiaSys 2.xx (actual version)
2.2.4.3.6 Component replacement
2.2.4.3.7 Troubleshooting procedures

2.1.5. Course Duration: The course shall consist of eight (8) working days of instruction. Four (4) days will be focused on Mechanics, and four (4) days will be focused on Electronics. Upon course completion, students will receive a certificate of completion.

3.0 Course Time: Courses shall begin daily at 8:00 am and end at 4:00 pm.

4.0 Course Scheduling: Courses will be scheduled by the Government no less than four (4) months in advance.

4.1 A total of four (4) of each course will be taught each year; two (2) of each course will be taught to CRG ONE students and two (2) of each course will be taught to CRG TWO students each year.

5.0 Qualifications: Both courses shall be taught by ONLY MTU authorized and certified instructors at MTU authorized facilities.

File details come from the government source that posted it.