Keysight BPA SOW Rev1 Redacted.pdf
PDF 93 KB Posted
- Attached to
- KEYSIGHT BPA
- Solicitation number
- N0017826Q1603
About this file
This is a Statement of Work (SOW) for a Keysight Blanket Purchase Agreement (BPA) with the Naval Surface Warfare Center, Dahlgren Division (NSWCDD). The contractor shall provide evaluation, repair, and calibration services for Keysight hardware at the contractor's facility. Individual BPA calls will not exceed $250,000. Services must comply with Original Equipment Manufacturer (OEM) specifications and ISO 17025 (Testing and Calibration Laboratories Standard).
The contractor is required to furnish all labor, material, and equipment for three service categories: (1) Evaluation services, including diagnostic testing to identify required repairs, determination of components needing repair or replacement, and provision of cost estimates prior to performing any repair work; (2) Repair services, including general maintenance and addressing issues identified during evaluation, with all labor, material, and equipment for adjustment and calibration in accordance with ISO 17025 including uncertainty bands; and (3) Calibration services, including adjustment and calibration of Keysight hardware per ISO 17025 standards. For both repair and calibration services, the contractor must provide documentation and certificates of conformance (CDRL A001) demonstrating successful calibration, make certificates available via their online portal (Infoline) to the Technical Point of Contact (TPOC), and ship hardware to the government upon completion with tracking information. The government will furnish the equipment list for each individual call, and specific TPOCs will be identified in each call.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Keysight BPA CDRL A001.pdf | ||
| N0017826Q1603 SF1449 SOLICITATION.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
KEYSIGHT BLANKET PURCHASE AGREEMENT (BPA)
STATEMENT OF WORK (SOW)
1.0 INTRODUCTION
The requiring activity is the Naval Surface Warfare Center, Dahlgren Division (NSWCDD).
currently uses the Keysight equipment to perform measurement and testing data collection. This equipment becomes worn or damaged during activities and requires evaluation, repair and calibration to be restored to the original working order. The Contractor shall provide this support in accordance with their commercial practices at the Contractor’s facilities. Requirements will be identified in individual Blanket Purchase Agreement (BPA) calls, which will not exceed $250K.
2.0 APPLICABLE DOCUMENTS
2.1 Original Equipment Manufacturer (OEM) Specifications
2.2 International Organization for Standardization (ISO) 17025, Testing and Calibration Laboratories Standard
3.0 REQUIREMENTS
The Contractor shall furnish all labor, material, and equipment required to provide evaluation, repair and calibration services for Keysight hardware. Specific requirements will be identified in individual BPA calls. These services shall be performed at the vendor’s facility.
3.1 The Contractor shall provide Evaluation services as follows:
3.1.1 The Contractor shall perform the evaluation of Keysight hardware to identify required repairs to resume working order of the equipment.
3.1.2 The contractor shall test the unit using contractor provided diagnostic equipment.
3.1.3 The contractor shall determine what components need to be repaired and/or replaced.
3.1.4 The contractor shall provide an estimate, which identifies the required repairs and costs associated. The Contractor shall not provide any repair services unless funding is available at the time the services will be rendered.
3.2 The Contractor shall provide Repair services as follows:
3.2.1 The Contractor shall provide repair for Keysight hardware that they received for services.
The Contractor shall address general maintenance and the issues identified during the evaluation.
3.2.2 The Contractor shall furnish all labor, material and equipment required to adjust and calibrate repaired Keysight hardware in accordance with ISO 17025 to include the Uncertainty Bands.
3.2.3 The Contractor shall provide documentation and a certificate of conformance demonstrating that successful calibration was performed. (CDRL A001)
3.2.4 The Contractor shall ship the hardware to the Government upon completion of all services. The Contractor shall provide tracking information to the Technical Point of Contact (TPOC) listed in each individual call.
3.3 The Contractor shall provide Calibration services as follows:
3.3.1 The Contractor shall furnish all labor, material and equipment required to adjust and calibrate Keysight hardware in accordance with ISO 17025 to include the Uncertainty Bands.
3.3.2 The Contractor shall provide documentation and a certificate of conformance demonstrating that successful calibration was performed. (CDRL A001)
3.3.3 The Contractor shall ship the hardware to the Government upon completion of all services. The Contractor shall provide tracking information to the TPOC listed in each individual call.
3.4 The Contractor shall make the certificates available via their online portal, Infoline, and accessible by the TPOC listed in each individual call.
4.0 GOVERNMENT FURNISHED EQUIPMENT (GFE)
The Government will provide a government furnished equipment list for evaluation, repair and calibration in each individual call.
5.0 TECHNICAL POINT OF CONTACT
5.1 The technical point of contact for the blanket purchase agreement (BPA) follows:
To be provided at time of award.
5.2 Specific Technical Point of Contacts will be identified in each individual call.
File details come from the government source that posted it. Updated .