Updated 131923 LOW EXPANSION MID TUBE GEN3.pdf

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U. S. DOD CONTRACTORS ONLY: CRITICAL TECHNOLOGY; EXPORT CONTROLLED: 8/15/2022. OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, DAHLGREN DIVISION, NAVAL SURFACE WARFARE

CENTER, 17320 DAHLGREN RD, DAHLGREN VA 22448-5100.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (SECTION 2751 OF TITLE 22, UNITED STATES CODE) OR THE EXPORT CONTROL REFORM ACT OF 2018 (CHAPTER 58 SECTIONS 4801-4852 OF TITLE 50, UNITED STATES

CODE). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25 AND DOD INSTRUCTION

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION DOCUMENTS DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

CUI

CUI

CONTROLLED BY: DEPT OF THE NAVY

CONTROLLED BY: NSWCDD, E10

CUI CATEGORY: CTI: EXPT

DISTRIBUTION/DISSEMINATION CONTROL: DISTRIBUTION D

POC: SEAN ROBERTS, 540-653-8285

ISOMETRIC VIEW

FOR REFERENCE ONLY

3.714 6X .200

6X .200

6X .190-32 UNF-2B THRU

A

A

BB

SEE SH2

ZONE C7

SEE SH2

ZONE C2

.0006.002 A

.005 A B

A

2.250+ .012 .003

1.950+ .012

.003 THRU .005 M A B

.005 M A B

2:1

INTERPRET DRAWING IAW ASME Y14.100

8 7 6 5 4 3 1

D

C

B

A

D

C

B

A

8 7 6 5 4 3 2 1

-NEXT ASSY USED ON

APPLICATION

DAI

D

DWG NO. REV

SCALE: UNIT WEIGHT: SHEET

DEPARTMENT OF THE NAVY

THIRD ANGLE PROJECTION

MATERIAL:

DO NOT SCALE THIS DRAWING

COMMANDER DAHLGREN DIVISION

NAVAL SURFACE WARFARE CENTER

6149 WELSH RD, SUITE 203

DAHLGREN, VA 22448-5000

TITLE

SIZE

NSWC D-SIZE

2.

EJF

0.65

MODELED

DRAWN

CHECKED

APPROVED

EJFODIN

5/14/2024

2024/03/27

LOW EXPANSION MID TUBE

GEN3, B1 GEN3 COLLIMATOR

ASSY2024/04/08CDB

07609 131923 131920

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOL ON ANGLE .5

1 PL .1 2 PL .01 3 PL .005

INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5-2009

ZONE REV DESCRIPTION DATE APPROVAL

REVISIONS

- TIER 2 WIP -

NOTES:

1. UNLESS OTHERWISE SPECIFIED:

REMOVE BURRS AND BREAK SHARP EDGES .01 MAX

INSIDE CORNERS R.01 MAX

SURFACE ROUGHNESS 125

2. MATERIAL: ALLVAR ALLOY 30,

NEGATIVE CTE TITANIUM ALLOY

3. SOURCE OF SUPPLY: ALLVAR ALLOYS

1201 E. FAYETTE ST.

SYRACUSE, NEW YORK 13210

979 599-5090

ALLVARALLOYS.COM

4. PACKAGE PART IN ACCORDANCE WITH MIL-STD-2073-1, METHOD 10, AND TAG PACKAGE

WITH THE FOLLOWING : "07609-131923-REV --VENDOR CAGE-AWARD DATE (YYYYMMDD)",

IAW MIL-STD-130.

ALL SHEETS ARE REV -

2.0000+ .0004 .0000

2.0000+ .0004 .0000

.375.375

2X .030 X 45°

SECTION B-B

SEE SH1

ZONE E4

.005 M A

.005 M A B M

B 3X 120°

59.25°

3X 120°

C

C

SECTION A-A

2 PLACES

SEE SH1

ZONE E4

.063+ .004

.001 THRU

SECTION C-C

SCALE 8 : 1

6 PLACES

.005 M A B

8 7 6 5 4 3 1

D

C

B

A

D

C

B

A

8 7 6 5 4 3 2 1

DAI

D

DWG NO. REV

SCALE: UNIT WEIGHT: SHEET 2 OF 2

SIZE

NSWC D-SIZE

131923

CUI

CUI

0.65

07609 1:2

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U. S. DOD CONTRACTORS ONLY: CRITICAL TECHNOLOGY; EXPORT CONTROLLED: 8/15/2022. OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, DAHLGREN DIVISION, NAVAL SURFACE WARFARE

CENTER, 17320 DAHLGREN RD, DAHLGREN VA 22448-5100.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (SECTION 2751 OF TITLE 22, UNITED STATES CODE) OR THE EXPORT CONTROL REFORM ACT OF 2018 (CHAPTER 58 SECTIONS 4801-4852 OF TITLE 50, UNITED STATES

CODE). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25 AND DOD INSTRUCTION

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION DOCUMENTS DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.