0426-02_-_Peng_Walk-in_Oven_Requirement_List.xlsx
XLSX spreadsheet 11 KB Posted
- Attached to
- EC Walk-In Oven Federal contract opportunity
- Solicitation number
- N0017819Q6883
About this file
Requirements List (included in SF18)
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0017819Q6883_-_SF18.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Description |
| Walk-in Oven QTY: 1 EACH |
| Requirements |
| Oven shall fit within the following dimensions : 8’ 5” High and 7’ 8” Wide with at least 6 inch margin on any given dimension once off shipping pallet |
| Oven shall be completely insulated/enclosed |
| Oven shall be equipped with a ramp-soak controller with the ability to program at least 10 profiles of at least 250 steps per profile with Graphical Trend Chart |
| All controller shall either be mounted on the ‘front’ (unconstrained length axis) or shall be separable from the machine to be able to be moved outside the swing arc of the doors. Control electronics shall not be mounted on the sides, top, or rear of the oven as these area shall be inaccessible during operation. Must have at least an 8' cord from the front of the unit if mounting off the unit |
| ability to pass thru four (4) AQD-500TF-1/4" airetech vacuum lines in order to maintain composite laminate under vacuum during cure via bulkhead quick disconnect fitting |
| Oven shall be equipped with two (2) 1" holes with glands for thermocouples or other testing equipment |
| Oven shall contain an interior recirculating fan to ensure temperature uniformity |
| Oven shall be powered by 200-230VAC/3Ph/60cycle |
| Oven shall be able to run unattended for at least 12 hrs and shall contain the appropriate alarms, safeguards, and meet or exceed the appropriate UL and NFPA standards for such devices |
| Oven shall be able to achieve at least 500 deg F steady state |
| Oven interior work envelope shall be at least 4’ wide x 4’ deep x 5’ high |
| walk in must meet or exceeds NFPA-86, NFPA-70, OSHA & UL requirements |
| Ball bearing heavy duty hinges |
| Welded steel construction |
| Minimal interior/exterior metal-to-metal contact |
| Reinforced steel doors |
| Gasketed door openings, Multiple-hinged, non-sag, welded doors |
| FM approved pressure release door latches |
| Adjustable louvered openings in duct work |
| Pre-wired NEMA 1 control cabinet with UL approved controls |
| Safety interlocks shut off heat if safety requirements are not ALL met |
| Digital indicating temperature controller |
| Solid state excess temperature controller |
| 18 gauge temperature resistant aluminized steel interior and #6 exterior Oversized mineral wool insulation |
| Heavy duty, large diameter, sheathed low watt density heating |
| One year limited warranty |
| Back mounted heat chamber |
| Exhaust fan and purge timer where volatile,toxic or undesirable fumes are present toxic or undesirable fumes are present |
| Main disconnect/breaker switch mounted in control panel |
| 2 1/2" Insulated Floor |
File details come from the government source that posted it.