15Q4923_-_SOW.doc

STATEMENT OF WORK

SAP 15-122

DTA- Ultra Wideband (UW) Signal Recorder - Hardware and Software Upgrade

1.0 BACKGROUND: The Combat Direction Systems Activity Dam Neck (CDSA DN) has been tasked by the Naval Cyber Warfare Development Group, Suitland to procure hardware and software upgrades with technical support in order to provide training enhancements for the Ultra Wideband (UW) Signal Recorder.

2.0 SCOPE: This Statement of Work (SOW) describes Technical data/software upgrades to the Ultra Wideband (UW) Signal Recorder previously purchased for Fleet support. The CDSA engineers have determined that since D-TA was the Original Equipment Manufacturer (OEM) for the Real-Time Ultra Wideband (UW) Signal Recorder [combination of the DTA-9500A-A1U-120 Wideband Digitizer and DTA-5000W-A2U-112/003 Recorder], D-TA should perform the required hardware and software upgrades, which consist of adding a USB-3 Data transfer capability to these two devices for faster archiving of recorded signals. It is imperative to provide hardware and software upgrades on the existing equipment for fleet training with a form/fit/function equivalent without additional development effort and to provide a cost savings to the Government.

3.0

REQUIREMENTS:

The Contractor shall provide support for the Ultra Wideband (UW) Signal Recorder, to include USB-3 Data transfers to the DTA-5000W-A2U-112/003 Recorder and the DTA-9500A-A1U-120 Wideband Digitizer.

· Combat Direction Systems Activity Dam Neck (CDSA DN) will provide Government Furnished Equipment (GFE); one (1) DTA-5000W-A2U-112/003 Recorder, S/N 10033 and one (1) DTA-9500A-A1U-120 Wideband Digitizer, S/N 10040 to Contractor for upgrades. Cost of equipment is valued at $95,000.00.

· The Contractor shall provide the necessary hardware/firmware and software upgrades to provide the USB-3 Data transfers.

· The Contractor shall fully test the assembled Ultra Wideband (UW) Signal Recorder upgrade using in-house acceptance test procedures for full and proper operation, to ensure the units are in “A” condition and ready for issue (RFI).

4.0 PLACE OF PERFORMANCE: Efforts under this order shall be performed at Contractor facilities, located at: D-TA Systems, 2500 Lancaster Road, Ottawa, ON, K1B 4S5 Canada.

5.0 TRAVEL REQUIREMENTS: None

6.0 TRANSPORTATION OF EQUIPMENT/MATERIAL: The Contractor shall return the completed Ultra Wideband (UW) Signal Recorder to CDSA DN using standard shipping practices.

7.0 COR DESIGNATION: TPOC for this order is Mike Haag, Ph 757-492-6097 or email michael.t.haag@navy.mil 8.0 UMMIPS PRIORITY: Not required for this order.