N0017814R4000.pdf

SOLICITATION, OFFER, AND AWARD

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

To be determined at Task Order Level

PAGE OF PAGES

1 | 97

2. CONTRACT NUMBER

3. SOLICITATION NUMBER

N00178-14-R-4000

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

5. DATE ISSUED

17 SEP 2014

6. REQUISITION/PURCHASE NO.

7. ISSUED BY CODE N00178 8. ADDRESS OFFER TO (If other than Item 7)

NAVAL SURFACE WARFARE CENTER

17632 DAHLGREN ROAD, SUITE 157

DAHLGREN, VA 22448-5110

Email: Seaport_EPCO@navy.mil

SEAPORT-e PCO

NSWCDD BLDG 183 ROOM 100

17632 DAHLGREN ROAD, SUITE 157

DAHLGREN, VA 22448-5110

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”

SOLICITATION

9. Sealed offers in original for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if hand carried, in the depository located in NO HANDCARRY ALLOWED (SEE SECTION L--MUST BE MAILED) until 2 pm local time on Thursday, 23 October 2014.

CAUTION — Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-10. All offers are subject to terms and conditions contained in this solicitation.

10. FOR A. NAME B. TELEPHONE (NO COLLECT CALLS) C. E-MAIL ADDRESS

INFORMATION CALL:

Code 022 AREA CODE

NUMBER

653-7087

EXT.

seaport_epco@navy.mil

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

X A SOLICITATION/CONTRACT FORM 1 X I CONTRACT CLAUSES 42

X B SUPPLIES OR SERVICES AND PRICE/COST 2 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

X C DESCRIPTION/SPECS./WORK STATEMENT 6 X J LIST OF ATTACHMENTS 59

X D PACKAGING AND MARKING 14 PART IV - REPRESENTATIONS AND INSTRUCTIONS

X E INSPECTION AND ACCEPTANCE 15 X K REPRESENTATIONS, CERTIFICATIONS

X F DELIVERIES OR PERFORMANCE 16 AND OTHER STATEMENTS OF OFFERORS 60

X G CONTRACT ADMINISTRATION DATA 17 X L INSTRS., CONDS., AND NOTICES TO OFFERORS 74

X H SPECIAL CONTRACT REQUIREMENTS 25 X M EVALUATION FACTORS FOR AWARD 91

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within __180___ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

10 CALENDAR DAYS

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGMENT OF AMENDMENTS AMENDMENT NO. DATE AMENDMENT NO. DATE

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. NAME CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

AND OFFER (Type or print)

ADDRESS

OF

OFFEROR

15B. TELEPHONE NUMBER 15C. CHECK IF REMITTANCE 17. SIGNATURE 18. OFFER DATE

AREA CODE

NUMBER

EXT.

ADDRESS IS DIFFERENT FROM ABOVE

- ENTER SUCH ADDRESS IN

SCHEDULE.

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED

20. AMOUNT

21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

23. SUBMIT INVOICES TO ADDRESS

SHOWN IN (4 copies unless otherwise specified)

ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print)

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT -- Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

NSN 7540-01-152-8064 STANDARD FORM 33 (Rev. 9-97) PREVIOUS EDITION NOT USABLE Prescribed by GSA – FAR (48 CFR) 53.214(c)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE

N00178-14-R-4000 Page 2 of 97

NAME OF OFFEROR OR CONTRACTOR

SECTION B - SUPPLIES OR SERVICES AND PRICES

THE OFFEROR SHALL INSERT THE PROPOSED AMOUNT OR CONTRACTOR SPECIFIC

INFORMATION WHERE AN * APPEARS.

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

7000-7999 Engineering, Technical, and Programmatic Support Services

**TBD**

Hours

$2,956,800,000.00

ALL ORDERS USING ITEMS 7000-7999 WILL BE COST TYPE ORDERS

UNIT UNIT PRICE MAX AMOUNT

8000-8999 Engineering, Technical, and Programmatic Support Services

11,800

Orders

$2,164,800,000.00

ALL ORDERS USING ITEMS 8000-8999 WILL BE FIXED PRICE ORDERS

UNIT UNIT PRICE MAX AMOUNT

9000-9999 Other Direct Costs required to perform effort under CLIN 7000-7999

1 Lot $158,400,000.00

ALL ORDERS USING ITEMS 9000-9999 WILL BE COST ONLY ORDERS

SEE SECTION H - SPECIAL CONTRACT REQUIREMENTS

**TBD** - MAXIMUM QUANTITY OF HOURS FOR CLIN 7000 WILL BE COMPLETED BY THE

GOVERNMENT AT CONTRACT AWARD

N00178-14-R-4000 Page 3 of 97

NAME OF OFFEROR OR CONTRACTOR

THE OFFEROR SHALL INDICATE IN THE FOLLOWING TABLE WHICH ZONE(S) ARE BEING

PROPOSED

Zone 1 Northeast

Zone 2

National Capital

Zone 3

Mid Atlantic

Zone 4

Gulf Coast

Zone 5

Midwest

Zone 6

Southwest

Zone 7

Northwest

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

BASE PERIOD

MINIMUM

MINIMUM AMOUNT

MAXIMUM

MAXIMUM AMOUNT

N/A

N/A

11,800 orders and **TBD Hours

$5,280,000,000.00

**TBD HOURS TO BE COMPLETED BY THE GOVERNMENT AT CONTRACT AWARD

CLIN MINIMUM/MAXIMUM QUANTITY AND CLIN VALUE

The minimum obligation under any awarded contract is $2,501.00. The maximum quantity(s) and CLIN value(s) for all orders issued against the CLIN(s) on this contract shall not exceed the maximum quantity(s) and CLIN value(s) stated in the following table.

CLIN

QUANTITY

AMOUNT

**TBD

HOURS

$2,956,800,000.00

ORDERS

$2,164,800,000.00

9000 1 LOT $ 158,400,000.00

**TBD HOURS TO BE COMPLETED BY THE GOVERNMENT AT CONTRACT AWARD

HQ B-2-0004 EXPEDITING CONTRACT CLOSEOUT (NAVSEA) (DEC 1995) (Applicable at Task Order Level)

(a) As part of the negotiated fixed price or total estimated amount of this contract, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $500 or less at the time of final contract closeout. The term "residual dollar amount" shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party may be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

N00178-14-R-4000 Page 4 of 97

HQ B-2-0007 LIMITATION OF COST OR LIMITATION OF FUNDS LANGUAGE

The clause entitled “LIMITATION OF COST” (FAR 52.232-20) or “LIMITATION OF FUNDS” (FAR 52.232-22), as appropriate, shall apply separately and independently to each separately identified estimated cost.

HQ B-2-0014 PAYMENTS OF FEE (S) (COMPLETION) (NAVSEA) (MAY 1993)

(a) For purposes of this contract, "fee" means "target fee" in cost-plus-incentive-fee type contracts, "base fee" in cost-plus-award-fee type contracts, "fixed fee" in cost-plus-fixed-fee type contracts for completion and phase type contracts.

(b) The Government shall make payments to the Contractor, subject to and in accordance with the clause in this contract entitled "FIXED FEE" (FAR 52.216-8) or "INCENTIVE FEE", (FAR 52.216-10), as applicable. Such payments shall be equal to * percent ( * ) of the allowable cost of each invoice submitted by and payable to the Contractor pursuant to the clause of this contract entitled "ALLOWABLE COST AND PAYMENT" (FAR 52.216-7), subject to the withholding terms and conditions of the "FIXED FEE" or "INCENTIVE FEE" clause, as applicable (percentage of fee is based on fee dollars divided by estimated cost dollars, including facilities capital cost of money). Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract.

(c) In the event of discontinuance of the work under this contract, or any specified phase of the contract, in accordance with the clause of this contract entitled "LIMITATION OF FUNDS" (FAR 52.232-22) or "LIMITATION OF COST" (FAR 52.232-20), as applicable, the fee shall be equitably adjusted by mutual agreement to reflect the diminution of work.

If the adjusted fee is less than the sum of all fee payments made to the Contractor under this contract, the Contractor shall repay the excess amount to the Government. If the adjusted fee exceeds all payments made to the Contractor under this contract, the Contractor shall be paid the additional amount, subject to the availability of funds. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract at the time of the discontinuance of work.

(d) Fee(s) withheld pursuant to the terms and conditions of this contract shall not be paid until the contract has been modified to reduce the fee(s) in accordance with paragraph (c) above, or until the Procuring Contracting Officer has advised the paying office in writing that no fee adjustment is required.

*To be incorporated and completed at the Task Order level, as appropriate.

HQ B-2-0015 PAYMENTS OF FEE(S) (LEVEL OF EFFORT – ALTERNATE 1) (NAVSEA) (MAY 2010)

(a) For purposes of this contract, “fee” means “target fee” in cost-plus-incentive-fee type contracts, base fee" in cost-plus-award-fee type contracts, or "fixed fee" in cost-plus-fixed-fee type contracts for level of effort type contracts.

(b) The Government shall make payments to the Contractor, subject to and in accordance with the clause in this contract entitled "FIXED FEE" (FAR 52.216-8) or "INCENTIVE FEE", (FAR 52.216-10), as applicable. Such payments shall be submitted by and payable to the Contractor pursuant to the clause of this contract entitled "ALLOWABLE COST AND PAYMENT" (FAR 52.216-7), subject to the withholding terms and conditions of the "FIXED FEE" or "INCENTIVE FEE" clause, as applicable, and shall be paid fee at the hourly rate(s) specified above per man-hour performed and invoiced. Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract.

(End of Text)

NOTES

⇒ Fee paid is based on total fee dollars divided by total man-hours to be provided.

*To be incorporated and completed at the Task Order level, as appropriate.

N00178-14-R-4000 Page 5 of 97

HQ B-2-0020 TRAVEL COSTS – ALTERNATE I (NAVSEA) (DEC 2005)

(a) Except as otherwise provided herein, the Contractor shall be reimbursed for its’ reasonable actual travel costs in accordance with FAR 31.205-46. The costs to be reimbursed shall be those costs accepted by the cognizant DCAA.

(b) Reimbursable travel costs include only that travel performed from the Contractor’s facility to the worksite, in and around the worksite, and from the worksite to the Contractor’s facility.

(c) Relocation costs and travel costs incident to relocation are allowable to the extent provided in FAR 31.205-35;

however, Contracting Officer approval shall be required prior to incurring relocation expenses and travel costs incident to relocation.

(d) The Contractor shall not be reimbursed for the following daily local travel costs:

(i) travel at U.S. Military Installations where Government transportation is available,

(ii) travel performed for personal convenience/errands, including commuting to and from work, and

(iii) travel costs incurred in the replacement of personnel when such replacement is accomplished for the Contractor’s or employee’s convenience

N00178-14-R-4000 Page 6 of 97

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

STATEMENT OF WORK

SCOPE

1.1 - Background In 2002, the Chief of Naval Operations (CNO) promulgated Seapower 21. Seapower 21 provides a framework to align, organize and integrate the U.S. Navy to meet the wide variety of challenges that lie ahead. The CNO called upon the entire Navy to find ways to become more efficient and effective. To meet Seapower 21 objectives and to increase efficiency, the NAVSEA Warfare Centers established the Seaport Enhanced (Seaport-e) Multiple Award Contract (MAC) vehicle, using a web-based, e-business procurement Portal, to facilitate performance-based service acquisition, leverage buying power, improve business intelligence and reduce cycle time. In October 2004, the Virtual SYSCOM Commanders formalized an agreement to expand the ordering community of Seaport-e to include all Virtual SYSCOM activities and to leverage the success of SeaPort-e in achieving the aforementioned objectives across the Virtual SYSCOM. Additionally, other activities, including the Military Sealift Command, Strategic Systems Programs, Office of Naval Research, and the United States Marine Corps have chosen to use SeaPort Enhanced.

1.2- Scope of Contract The Contractor shall, in response to task orders issued under this contract by the Naval Sea Systems Command, Naval Air

Systems Command, Space and Naval Warfare Systems Command, Naval Supply Systems Command, Military Sealift Command, Naval Facilities Command, Strategic Systems Programs, Office of Naval Research, and the United States Marine Corps, provide services that potentially span the entire spectrum of mission areas supported by the activities and technical capabilities that comprise the various ordering offices, as well as provide professional support services to the overall Navy, and Marine Corps organizations.

Services within the functional areas identified below, may be performed under this contract for new product areas, programs, or missions, which are assigned to these activities during the life of the contract. Additionally, activities may provide limited support under this contract to other Department of Defense (DoD), non-DoD, or Joint agencies for work that is integrally related to product areas and mission.

Services to be provided under this contract are categorized into 22 functional services areas as follows, and are further defined in

Paragraph 3 below:

1. Research and Development Support

2. Engineering, System Engineering and Process Engineering Support

3. Modeling, Simulation, Stimulation, and Analysis Support

4. Prototyping, Pre-Production, Model-Making, and Fabrication Support

5. System Design Documentation and Technical Data Support

6. Software Engineering, Development, Programming, and Network Support

7. Reliability, Maintainability, and Availability (RM&A) Support

8. Human Factors, Performance, and Usability Engineering Support

9. System Safety Engineering Support

10. Configuration Management (CM) Support

11. Quality Assurance (QA) Support

12. Information System (IS) Development, Information Assurance (IA), and Information Technology (IT) Support

13. Inactivation and Disposal Support

14. Interoperability, Test and Evaluation, Trials Support

15. Measurement Facilities, Range, and Instrumentation Support

16. Logistics Support

17. Supply and Provisioning Support

18. Training Support

19. In-Service Engineering, Fleet Introduction, Installation and Checkout Support

20. Program Support

21. Functional and Administrative Support

22. Public Affairs and Multimedia Support

N00178-14-R-4000 Page 7 of 97

NAME OF OFFEROR OR CONTRACTOR

2. APPLICABLE DOCUMENTS

Applicable military specifications and standards that are listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS), and current on the date of contract award, plus applicable industry standards, or any other program documents may be specified within the individual task orders that will be issued for performing specific tasks under this indefinite quantity contract.

3. REQUIREMENTS

The Contractor shall provide qualified personnel, materials, facilities, equipment, test instrumentation, data collection and analysis, hardware and software, and other services that will support the Navy and Marine Corps in the execution of their overall organizational functions and the specific missions of the individual activities and ordering offices. Functional areas to be supported under this contract are described in the sections below.

3.1 - Research and Development Support This functional area consists of supporting the development and application of scientific and analytical disciplines to conduct fundamental research; scientific study and experimentation directed toward advancing the state-of-the-art or increasing knowledge or understanding; concept formulation; assessment of system and subsystem requirements; development, analysis and evaluation of concepts, technologies, systems and subsystems; and development of operational concepts and tactics with the end goal being the application of results to developing new or improving existing warfighting capabilities. This effort may include manning, operating, and maintaining test support craft and experimental vessels in the open ocean or restricted waters to support tests.

3.2 - Engineering, System Engineering and Process Engineering Support This functional area consists of supporting the application of engineering disciplines to technically support development of new and existing Naval capabilities and systems, technically support development of significant alterations to existing systems, support integration and interface of existing equipment or software into different applications or platforms to support the warfighter, and support evaluation of foreign or non-developmental systems, equipments, and technologies. This functional area also includes all support required within the area of environmental engineering of U. S. Navy weapon systems and base related infrastructure.

3.3 - Modeling, Simulation, Stimulation, and Analysis Support This functional area consists of the application of a standardized, rigorous, structured methodology to create and validate a physical, mathematical, or otherwise logical representation of a system, entity, phenomenon, or process. The functional area involves the use of models, including emulators, prototypes, simulators, and stimulators, either statically or over time, to develop data as a basis for making managerial, technical, strategic, or tactical decisions.

3.4 - Prototyping, Pre-Production, Model-Making, and Fabrication Support This functional area consists of the building, fabrication, testing, evaluating and operating reduced and full scale models, mock-ups, prototypes, pre-production units and research and development (R&D) test tools of electronic and electro-mechanical systems and system elements. Fabrication and machining of replacement parts or equipments for fielded systems or platforms is included. Includes the use of traditional materials as well as new composite materials.

3.5 - System Design Documentation and Technical Data Support This functional area involves the engineering effort required to prepare and assure that the detailed technical data documentation that is necessary to support system development reflects the latest design, configuration, integration, and installation concepts.

Technical documentation may be in the form of paper, electronic (digital) or interactive computer systems.

3.6 - Software Engineering, Development, Programming, and Network Support This functional area consists of applying the engineering and scientific disciplines to perform technical analysis of, technically support development of or selection of hardware and computer software, or modification to existing hardware and software for systems, test facilities, or training facilities. This also consists of software engineering efforts and programming support required to technically support software implementation in systems, sub-systems, and components utilizing computers, electronics, and software.

Planning, designing, coding, testing, integrating, supporting, and delivering algorithms, software (source code and executables), computer programs are the inherent activities of this functional area. Commercial Off-The-Shelf (COTS) solutions and product modifications (e.g., software tools, licensing, and associated hardware) which are incidental to the overall support service efforts are considered within the scope of this functional area. Generally, the software development processes used for software development under this contract shall be, as a minimum, assessed at Software Engineering Institute (SEI) Capability Maturity Model (CMM) Level

N00178-14-R-4000 Page 8 of 97

NAME OF OFFEROR OR CONTRACTOR

3 or equivalent, however the Government may specify other (either lower or higher) standards in individual task orders issued under the contract.

3.7 - Reliability, Maintainability, and Availability (RM&A) Support

This functional area consists of applying engineering, scientific, and analytical disciplines to ensure that systems and platforms RM&A requirements are integrated with the system design, development and life cycle sustainment resulting in warfighting capabilities that function effectively when required and that detection and correction of design deficiencies, weak parts, and workmanship defects that affect functionality are implemented.

3.8 - Human Factors, Performance, and Usability Engineering Support This functional area consists of applying engineering, scientific, and analytical disciplines to ensure that design of interactive systems are safer, more secure and easier to use thereby reducing accidents due to human error, increasing system integrity and enabling more efficient process operations. This functional area also includes applying engineering, scientific, and analytical disciplines to ensure that the number, type, mix, knowledge, skills, and abilities (KSAs), aptitudes and physical characteristics of operators, maintainers and support personnel have been defined and documented early in the system design phase.

3.9 - System Safety Engineering Support

This functional area consists of applying engineering and analytical disciplines to ensure that safety is considered in all aspects of design, development, operation, maintenance, and modification of systems and platforms.

3.10 - Configuration Management (CM) Support This functional area consists of applying engineering and analytical disciplines to identify, document, and verify the functional, performance, and physical characteristics of systems, to control changes and non-conformance, and to track actual configurations of systems and platforms.

3.11 - Quality Assurance (QA) Support This functional area consists of applying engineering and analytical disciplines to ensure that the processes and products used in the design, development, fabrication, manufacture and installation result in quality products.

3.12 - Information System (IS) Development, Information Assurance (IA), and Information Technology (IT) Support This functional area consists of providing information system software analysis, requirements definition, design, development, test, modification, installation, implementation, quality assurance, training, and documentation to meet the evolving data storage and reporting needs of programs and management. Analyze existing IT and IS databases, web sites, and IT applications and recommend new or improved interfaces and improved management tools that meet new management requirements, or improve management effectiveness and efficiency. Perform maintenance and technical support for Local Area Networks (LAN) and Wide Area Networks (WAN) that are outside the cognizance of the Navy Marine Corps Intranet (NMCI). Modify, implement and maintain web based information systems and links. Develop web-site structure, prepare documentation for population, implement and maintain web sites.

Provide systems engineering and technical support for establishment, test, upgrade, and operational support of systems, networks, workstations and support equipment hardware and software that are outside the cognizance of NMCI. Conduct IA analyses, develop, recommend, and implement, monitor, update, and maintain, IA practices, procedures, equipments, algorithms, and hardware that are outside the cognizance of NMCI.

3.13 - Inactivation and Disposal Support This functional area consists of technically supporting submarine, aircraft, weapons system and ship inactivation and disposal efforts to ensure that critical equipment removed is safeguarded and destroyed in accordance with the appropriate Navy instructions and directives. Provide direct liaison with the Shipyard or depot and the Navy to insure that critical technology is not inadvertently transferred to foreign nationals or governments. Ensure proper documentation exists for the sale of excess materials from inactivated platforms prior to sale by the Defense Reutilization and Marketing Service (DRMS). Technically support the demilitarization process for shipboard equipment using the Expanded Work Breakdown Structure (EWBS), Trade Security Controls (TSC), and Munitions List Items (MLI) all of which are used to determine the disposition of excess, not-ready-for-issue (non-RFI) equipment. Technically support the security classification requirements and guidelines for data and equipment necessary to assist in making decisions on sales issues.

N00178-14-R-4000 Page 9 of 97

NAME OF OFFEROR OR CONTRACTOR

3.14 - Interoperability, Test and Evaluation, Trials Support This functional area consists of the application of engineering, scientific, and analytical disciplines necessary to ensure that developed platforms, systems, and warfighting capabilities have been properly tested and that joint interoperability requirements have been fully met at all levels of their life cycle.

3.15 - Measurement Facilities, Range, and Instrumentation Support This functional area consists of applying engineering, analytical, and technician disciplines in the operation and support of measurement facilities, ranges and instrumentation used for testing, evaluating, experimenting, and exercising platforms and systems.

3.16 - Logistics Support This functional area consists of applying the engineering and analytical disciplines required to implement acquisition logistics as a multi-functional technical management discipline associated with the design, development, test, production, fielding, sustainment, and improvement modifications of cost effective systems that achieve the warfighters’ peacetime and wartime readiness requirements. The principal objectives of acquisition logistics are to ensure that support considerations are an integral part of the system’s design requirements, that the system can be cost effectively supported through its life-cycle, and that the infrastructure elements necessary to the initial fielding, operation and maintenance support of the system are identified and developed and acquired.

3.17 - Supply and Provisioning Support This functional area consists of applying the analytical and technical disciplines required to ensure that fielded warfighting capabilities are materially sustained. The principal objectives of this functional area are to ensure that material for operation and maintenance of warfighter systems is available when required, that materials are properly stored and transported, and inventories are managed in a cost effective manner to sustain supported systems.

3.18 - Training Support

3.18.1 Technical Training Support

This functional area consists of applying the engineering and analytical disciplines required to ensure that the warfighter and technical support community is provided with adequate instruction including applied exercises resulting in the attainment and retention of knowledge, skills, and attitudes regarding the platforms, systems, and warfighting capabilities they operate and maintain.

3.18.2 Professional Development and Training Support

This functional area includes organizational development and process improvement training activities. This functional area consists of information dissemination, as well as the development and facilitation of training for the Navy and Marine Corps workforce related to organizational development and process improvement initiatives. This includes efforts such as implementation of LEAN practices, implementation of National Security Personnel System (NSPS), Competency Alignment initiatives, and other workforce training efforts related to organizational development initiatives, process improvement initiatives and Human Capital Strategies.

3.19 - In-Service Engineering, Fleet Introduction, Installation and Checkout Support This functional area consists of the application of engineering, analytical, and technical disciplines and skills to establish and maintain long-term engineering, operation, and maintenance support for in-service warfighting capabilities as well as the capability to modernize or introduce transformational technologies into those capabilities.

3.20 - Program Support

This functional area consists of applying the business, financial management, and technical disciplines required to support planning, organizing, staffing, controlling, and leading team efforts in managing acquisition programs such that the result places a capable and supportable system in the hands of the warfighter when and where it is needed, and does so at an affordable price. This functional area represents an integration of a complex system of differing but related functional disciplines that must work together to achieve program goals through development, production, deployment, operations, support, and disposal.

3.21 - Functional and Administrative Support

3.21.1 Clerical and Administrative Support

This functional area consists of clerical and administrative support required for seamless operation of offices and support functions. This area also includes support of personal property management functions.

N00178-14-R-4000 Page 10 of 97

NAME OF OFFEROR OR CONTRACTOR

3.21.2 Analytical and Organizational Assessment Support

This functional area consists of analytical and organizational assessment support functions, Human Capital Strategy processes and programs, organizational development efforts and organizational process improvement efforts.

3.21.3 Most Efficient Organization (MEO) Teaming Support Services (executed in compliance with Circular No. A-76 dated 29 May 2003)

This functional area consists of organizational assessment, infrastructure assessment, financial management, process engineering, business as well as technical and non-technical disciplines to support development and implementation of the MEO. This functional area includes offering recommendations for technology infusion, capital investments, organizational structures, staffing and lean performance execution processes and metrics. In the event of an MEO selection/decision, this functional area includes providing accepted technology solutions, capital investments and staffing in accordance with the MEO through a follow-on contract action or option. This functional area will include conflict of interest clauses.

3.22 - Public Affairs and Multimedia Support This functional area consists of supporting Public Affairs organizations as it relates to strategic counsel, planning and execution of communication as a function of command goals and requirements for informing, and promoting the successes of the organization both to external and internal media. Public Affairs organizations oversee the development, implementation and execution of the command communication strategy, planning and tactics for enterprise and national-level initiatives across all target audiences. To accomplish this Public affairs organizations require specific contractor public affairs support including; speechwriting, multimedia documentation, development of strategic communication plans, support of the command exhibit program, exhibit planning/services/leasing of exhibit, photography support, design/layout of command publication to provide critical assistance in development of communication messages for the Navy. This area also includes support in the development of multimedia documentation to support Command communication goals; support for development of strategic communication plans to include metrics, technical writing services, message/brand development, visual media to include still, video and multimedia, and other public affairs services.

4. GOVERNMENT-FURNISHED PROPERTY

All Government furnished information, material, and equipment will be specified in the individual task orders. All government furnished information is the property of the U.S. Government and shall not be transferred to any individual or agency public or private without the express written approval of the Task Order Contracting Officer, except as required for the specific performance of tasks under this contract.

5. SECURITY REQUIREMENTS

The work to be performed under this contract may involve access to, handling of, and generation of classified material. The Contractor shall appoint a Security Officer, who shall (1) be responsible for all security aspects of the work performed under this contract, (2) assure compliance with all DoD and U.S. Navy specific regulations regarding security, and (3) assure compliance with any written instructions from the Security Officers of the activity issuing task orders under this contract. Specific security requirements applicable to the work to be performed under each task order will be identified in the individual task orders. When applicable, a DD Form 254 will be prepared by the ordering activity and issued with the task order. If the work being performed under the task order would require access to Government Information Technology Systems, then an applicable clause will be included at the task order level.

6. DATA DELIVERABLES

Specific technical data will be included in individual Task Orders issued under the contract, either as CDRL’s or specified in the Statement of Work. It is anticipated that data items ordered under individual orders will be required to be prepared using standardized Data Item Descriptions (DIDs) listed in the DoD Acquisition Management System and Data Requirements Control List (AMSDL) current at the time of order issuance. It is anticipated that all deliverables prepared under this contract may be required to be delivered as either hardcopy and on electronic media or both as specified in the individual task orders.

7. ENTERPRISE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATION (ECMRA)

Reporting requirements of the Enterprise-Wide Contractor Manpower Reporting Application (ECMRA) shall be specified in Section C at the individual Task Order level.

N00178-14-R-4000 Page 11 of 97

NAME OF OFFEROR OR CONTRACTOR

HQ C-2-0002 ACCESS TO PROPRIETARY DATA OR COMPUTER SOFTWARE (NAVSEA) (JUN 1994)

(a) Performance under this contract may require that the Contractor have access to technical data, computer software, or other sensitive data of another party who asserts that such data or software is proprietary. If access to such data or software is required or to be provided, the Contractor shall enter into a written agreement with such party prior to gaining access to such data or software. The agreement shall address, at a minimum, (1) access to, and use of, the proprietary data or software exclusively for the purposes of performance of the work required by this contract, and (2) safeguards to protect such data or software from unauthorized use or disclosure for so long as the data or software remains proprietary. In addition, the agreement shall not impose any limitation upon the Government or its employees with respect to such data or software. A copy of the executed agreement shall be provided to the Task Order Contracting Officer. The Government may unilaterally modify the contract to list those third parties with which the Contractor has agreement(s).

(b) The Contractor agrees to: (1) indoctrinate its personnel who will have access to the data or software as to the restrictions under which access is granted; (2) not disclose the data or software to another party or other Contractor personnel except as authorized by the Task Order Contracting Officer; (3) not engage in any other action, venture, or employment wherein this information will be used, other than under this contract, in any manner inconsistent with the spirit and intent of this requirement; (4) not disclose the data or software to any other party, including, but not limited to, joint venturer, affiliate, successor, or assign of the Contractor; and (5) reproduce the restrictive stamp, marking, or legend on each use of the data or software whether in whole or in part.

(c) The restrictions on use and disclosure of the data and software described above also apply to such information received from the Government through any means to which the Contractor has access in the performance of this contract that contains proprietary or other restrictive markings.

(d) The Contractor agrees that it will promptly notify the Task Order Contracting Officer of any attempt by an individual, company, or Government representative not directly involved in the effort to be performed under this contract to gain access to such proprietary information. Such notification shall include the name and organization of the individual, company, or Government representative seeking access to such information.

(e) The Contractor shall include this requirement in subcontracts of any tier which involve access to information covered by paragraph (a), substituting "subcontractor" for "Contractor" where appropriate.

(f) Compliance with this requirement is a material requirement of this contract.

HQ C-2-0011 COMPUTER SOFTWARE AND/OR COMPUTER DATABASE(S) DELIVERED TO AND/OR

RECEIVED FROM THE GOVERNMENT (NAVSEA) (APR 2004)

(a) The Contractor agrees to test for viruses all computer software and/or computer databases, as defined in the clause entitled "RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER SOFTWARE DOCUMENTATION" (DFARS 252.227-7014), before delivery of that computer software or computer database in whatever media and on whatever system the software is delivered. The Contractor warrants that any such computer software and/or computer database will be free of viruses when delivered.

(b) The Contractor agrees to test any computer software and/or computer database(s) received from the Government for viruses prior to use under this contract.

(c) Unless otherwise agreed in writing, any license agreement governing the use of any computer software to be delivered as a result of this contract must be paid-up and perpetual, or so nearly perpetual as to allow the use of the computer software or computer data base with the equipment for which it is obtained, or any replacement equipment, for so long as such equipment is used. Otherwise the computer software or computer database does not meet the minimum functional requirements of this contract. In the event that there is any routine to disable the computer software or computer database after the software is developed for or delivered to the Government, that routine shall not disable the computer software or computer database until at least twenty-five calendar years after the delivery date of the affected computer software or computer database to the Government.

N00178-14-R-4000 Page 12 of 97

NAME OF OFFEROR OR CONTRACTOR

(d) No copy protection devices or systems shall be used in any computer software or computer database delivered under this contract to restrict or limit the Government from making copies. This does not prohibit license agreements from specifying the maximum amount of copies that can be made.

(e) Delivery by the Contractor to the Government of certain technical data and other data is now frequently required in digital form rather than as hard copy. Such delivery may cause confusion between data rights and computer software rights.

It is agreed that, to the extent that any such data is computer software by virtue of its delivery in digital form, the Government will be licensed to use that digital-form data with exactly the same rights and limitations as if the data had been delivered as hard copy.

(f) Any limited rights legends or other allowed legends placed by a Contractor on technical data or other data delivered in digital form shall be digitally included on the same media as the digital-form data and must be associated with the corresponding digital-form technical data to which the legends apply to the extent possible. Such legends shall also be placed in human-readable form on a visible surface of the media carrying the digital-form data as delivered, to the extent possible.

(End of Text)

HQ C-2-0037 ORGANIZATIONAL CONFLICT OF INTEREST (NAVSEA) (JUL 2000)

NOTE: THIS CLAUSE WILL BE INVOKED IN DIFFERENT VARIATIONS AT THE TASK ORDER LEVEL, notwithstanding other language in this contract that gives this contract precedence when it conflicts with task orders, the task order version of organizational conflict of interest clause, if any, shall take precedence.

(a) (1) "Organizational Conflict of Interest" means that because of other activities or relationships with other persons, a person is unable or potentially unable to render impartial assistance or advice to the Government, or the person's objectivity in performing the contract work is or might be otherwise impaired, or a person has an unfair competitive advantage.

"Person" as used herein includes Corporations, Partnerships, Joint Ventures, and other business enterprises.

(2) “Contractor” as used in this clause includes any affiliate, subcontractor, consultant or employee of the Contractor, as well as any joint venture involving the Contractor, any entity into or with which it may subsequently merge or affiliate, or any other successor or assignee of the Contractor. All references to the “Contractor” as contained in this clause shall apply with equal force to all of these included.

(3) “Contract” and “task order” shall be used as applicable to the level at which this clause is being invoked.

(b) The Contractor warrants that to the best of its knowledge and belief, and except as otherwise set forth in the contract, the Contractor does not have any organizational conflict of interest(s) as defined in paragraph (a).

(c) It is recognized that the effort to be performed by the Contractor under this task order may create a potential organizational conflict of interest on the instant contract or on a present or future acquisition. In order to avoid this potential conflict of interest, and at the same time to avoid prejudicing the best interest of the Government, the right of the Contractor to participate in future procurement of equipment and/or services that are the subject of any work under this contract shall be limited as described below and in accordance with the requirements of FAR 9.5.

(d) (1) The Contractor agrees that it shall not release, disclose, or use in any way that would permit or result in disclosure to any party outside the Government any information provided to the Contractor by the Government during or as a result of performance of this task order. Such information includes, but is not limited to, information submitted to the Government on a confidential basis by other persons. Further, the prohibition against release of Government provided information extends to cover such information whether or not in its original form, e.g., where the information has been included in Contractor generated work or where it is discernible from materials incorporating or based upon such information. This prohibition shall not expire after a given period of time.

N00178-14-R-4000 Page 13 of 97

NAME OF OFFEROR OR CONTRACTOR

(2) The Contractor agrees that it shall not release, disclose, or use in any way that would permit or result in disclosure to any party outside the Government any information generated or derived during or as a result of performance of this task order. This prohibition shall not expire after a given period of time.

(e) (1) The Contractor further agrees that, during the performance of this task order and for a period of three years after completion of performance of this task order, the Contractor, any affiliate of the Contractor, any subcontractor, consultant, or employee of the Contractor, any joint venture involving the Contractor, any entity into or with which it may subsequently merge or affiliate, or any other successor or assign of the Contractor, shall not furnish to the United States Government, either as a prime contractor or as a subcontractor, or as a consultant to a prime contractor or subcontractor, any equipment or services that is the subject of the work to be performed under this task order.

(2) This exclusion does not apply to any recompetition for equipment or services furnished pursuant to this task order.

(3) As provided in FAR 9.505-2, notwithstanding the three-year bar set provided for in paragraph (e)(1), if the Government uses, as a basis for the procurement of any equipment or services work statements or other acquisition related documents growing out of the effort performed under this task order from a source other than the contractor, subcontractor, affiliate, or assign of either, during the course of performance of this task order or before the three- year period following completion of this task order has lapsed, the Contractor may, with the authorization of the Contracting Officer, participate in a subsequent procurement for the same system, component, or service. In other words, the Contractor may be authorized to compete for procurement(s) for equipment or services subsequent to an intervening procurement.

(f) The Contractor agrees that, if after award, it discovers an actual or potential organizational conflict of interest, it shall make immediate and full disclosure in writing to the SeaPort/Task Order Contracting Officer. The notification shall include a description of the actual or potential organizational conflict of interest, a description of the action that the Contractor has taken or proposes to take to avoid, mitigate, or neutralize the conflict, and any other relevant information that would assist the SeaPort/Task Order Contracting Officer in making a determination on this matter. This notification requirement shall also apply to any release of information in contravention of paragraph (d). Notwithstanding this notification, the Government may terminate the contract/Task Orders for the convenience of the Government if determined to be in the best interest of the Government.

(g) Notwithstanding paragraph (f) above, if the Contractor was aware, or should have been aware, of an organizational conflict of interest prior to the award of this contract or becomes, or should become, aware of an organizational conflict of interest after award of this contract and does not make an immediate and full disclosure in writing to the SeaPort/Task Order Contracting Officer, the Government may terminate this contract/task orders for default.

(h) If the Contractor takes any action prohibited by this requirement or fails to take action required by this requirement, the Government may terminate this contract for default.

(i) The SeaPort/Task Order’s Contracting Officer's decision as to the existence or nonexistence of an actual or potential organizational conflict of interest shall be final.

(j) Nothing in this requirement is intended to prohibit or preclude the Contractor from marketing or selling to other program offices, PEO’s or Government agencies its equipment or services if the requirement of the other program office, PEO or agency for the equipment or services is unrelated to any work performed under this contract/task order.

Additionally, this requirement shall not preclude a Contractor involved in preparing a statement of work pursuant to its development and design work on a piece of equipment from participating in a procurement for that equipment.

(k) The Contractor shall promptly notify the Contracting Officer, in writing, if it has been tasked to evaluate or advise the Government concerning its own products or activities or those of a competitor in order to ensure proper safeguards exist to guarantee objectivity and to protect the Government's interest.

(l) The Contractor shall include this requirement in subcontracts of any tier which involve access to information or situations/conditions covered by the preceding paragraphs, substituting "subcontractor" for "contractor" where appropriate.

(m) The rights and remedies described herein shall not be exclusive and are in addition to other rights and remedies provided by law, including those set forth at FAR Part 9.5, or elsewhere included in this contract.

(n) Compliance with this requirement is a material requirement of this contract.

N00178-14-R-4000 Page 14 of 97

NAME OF OFFEROR OR CONTRACTOR

SECTION D - PACKAGING AND MARKING

ITEMS 7000 THROUGH 9000 – There are no packaging or marking requirements for the services to be ordered under the task orders. All requirements for packaging and marking of supplies or documents associated with the services shall be packaged, packed and marked in accordance with the provisions set forth below unless otherwise indicated in individual task orders.

HQ D-1-0001 DATA PACKAGING LANGUAGE

Data to be delivered by Integrated Digital Environment (IDE) or other electronic media shall be as specified in the contract.

All unclassified data shall be prepared for shipment…