N00178-14-R-3011_Amendment_4.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

This amendment extends the proposal response due date until May 15, 2014 at 2:00PM EST.; updates Clause Ddl-L31 to include a quantity of

13 units of CDS VAB 3-Panel Insert Field Change 2 for FY 2015 under LHD 2, Mod 3C; and posts vendor questions and Government responses as indicated on the follow ing pages. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 12

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 25-Apr-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00178-14-R-3011

X 9B. DATED (SEE ITEM 11)

18-Mar-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

25-Apr-2014

CODE

NSWCDD

ATTN: THERESA ASHTON/CODE CS40-11

THERESA.ASHTON@NAVY.MIL

17632 DAHLGREN ROAD STE 157

DAHLGREN VA 22488-5110

N00178 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00178-14-R-3011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 01-May-2014 02:00 PM to 15-May-2014 02:00 PM.

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

Ddl-L31 COST PROPOSAL – SPECIFIC REQUIREMENTS – COMPLEX SUPPLIES/R&D ITEMS

The cost proposal must provide breakdowns for the following basic price and/or cost elements, as applicable:

(a) This proposal shall contain Firm Fixed Pricing (FFP) as stated in Section B to establish a contract ceiling value under CLIN 0001. The offeror shall provide as a part of their cost proposal the summed value of each piece of equipment times the quantity as identified in the chart below per fiscal year. The summed total value for

FY14, FY15, FY16 and FY17 (all equipment quantities for the entire period of performance) shall equal the established contract ceiling value (CLIN 0001). See chart below:

Note: Requests for Technical Data Packages (TDP's) shall be sent electronically to Theresa Ashton-Moore at: theresa.ashton-moore@navy.mil or faxed to (540) 653-6810, Attn: Theresa Ashton-Moore. The TDP's will be restricted to current DoD and DoD contractor's only. Each interested DoD contractor must hold an active Joint

Certification Program (JCP) certification with the Logistics Information Service. Additional information regarding obtaining JCP certification can be found at: http://www.dlis.dla.mil/jcp. Along with the request to receive the technical data package, interested parties should also provide the company's address, telephone number, POC and provide the company’s CAGE Code, DUNS number or JCP Certification Number, as well as the DoD contract number for which the company currently holds an active DoD contract. Requests for TDP's should be submitted not later than April 1, 2014 to allow potential offeror’s adequate time for proposal preparation and timely submission prior to the proposal response due date. It is not the Government’s intent to grant extensions to the proposal response due date as a result of untimely request/receipt of the TDP’s. The TDP's include data restricted by the

Arms Export Control Act.

mailto:theresa.ashton-moore@navy.mil http://www.dlis.dla.mil/jcp

FY2014

CVN 78 WI LSD 44

Mod 5C

LSD 45

Mod 5C

LSD 47

Mod 5C

ICSTF LSD 51

Mod 5C

SDTS LPD 23

Mod 2D

CVN 77

Mod 1D

CVN 70

Mod 1D

SSDS Mk2

½ ICSTD

SSDS Mk2

Mod 1D/2D

WI

SSDS Mk2

Mod 1D/2D

Design

Agent

Total

Price

Equipment Description FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 $

Tactical Computer Console

(TCC) OJ-830 (V) 2 (LSD

Config)

1 1 1 1 1 $

Tactical Computer Console

(TCC) OJ-830 (V) 2 (CVN

Config)

1 1 $

Common Display System

(CDS) Variant “B” Field

Change 1 OJ-836/U

3 3 3 3 3 3 3 $

Tactical Computer Console

OJ-830 (V) 1

1 1 1 1 1 1 2 1 $

Automated Status Board

(ASTAB) DU-20B/S

27 27 2 2 $

SAS Communication Panel

Orbit

4 4 4 4 4 4 4 $

CDS Field Change Digital

Video Interface (DVI) LSD

3 3 3 3 3 3 3 $

CDS Field Change Push to

Talk LSD

3 3 3 3 3 3 3 $

Color Medium Screen Display

(CMSD) with mounting kit

42” LSD

3 3 3 3 3 3 3 $

Color Large Screen Display

(CLSD) with mounting kit 55”

CVN

2 2 2 2 $

Maintenance Table 1 1 1 1 1 1 1 1 1 1 1 1 $

Maintenance Assist Modules

(MAMs) Cabinet, CY-8830C/S

1 1 1 1 1 1 1 1 $

MAMs Kit LSD, CVN, LPD, LHD 1 1 1 1 1 1 1 1 1 1 1 1 $

INCO Kit LSD, LPD, LHD 1 1 1 1 1 $

INCO Kit CVN 1 1 1 1 1 $

TOTAL SUMMED VALUE

FOR FY14:

FY2015

LSD 43

Mod 5C

CVN 74

Mod 1D

LDP 18

Mod 2D

LDP 19

Mod 2D

LHD 2

Mod 3C

Total

Price

Equipment Description FY15 FY15 FY15 FY15 FY15

Tactical Computer Console (TCC) OJ-830 (V) 2

(LSD Config)

1 $

Common Display System (CDS) Variant “B”

Field Change 1 OJ-836/U

3 $

Tactical Computer Console OJ-830 (V) 1 1 2 2 $

Automated Status Board (ASTAB) DU-20B/S 27 $

CDS VAB 3-Panel Insert Field Change 2 13 $

SAS Communication Panel Orbit 4 $

CDS Field Change Digital Video Interface

(DVI) LSD

3 $

CDS Field Change Push to Talk LSD 3 $

Color Medium Screen Display (CMSD) with mounting kit 42” LSD

3 $

Color Large Screen Display (CLSD) with mounting kit 55” CVN

2 $

Maintenance Table 1 1 1 1 $

Maintenance Assist Modules (MAMs) Cabinet, CY-8830C/S

1 1 1 1 $

MAMs Kit LSD, CVN, LPD, LHD 1 1 1 1 $

INCO Kit LSD, LPD, LHD 1 1 1 $

INCO Kit CVN 1 $

TOTAL SUMMED VALUE FOR FY15: $

FY2016

LDP

Class

Mod 2D

LSD

Class

Mod 5C

Total

Price

Equipment Description FY16 FY16

Tactical Computer Console (TCC) OJ-830 (V) 2

(LSD Config)

1 $

Common Display System (CDS) Variant “B”

Field Change 1 OJ-836/U

3 $

Tactical Computer Console OJ-830 (V) 1 2 1 $

Automated Status Board (ASTAB) DU-20B/S $

CDS VAB 3-Panel Insert Field Change 2 $

SAS Communication Panel Orbit 4 $

CDS Field Change Digital Video Interface

(DVI) LSD

3 $

CDS Field Change Push to Talk LSD 3 $

Color Medium Screen Display (CMSD) with mounting kit 42” LSD

3 $

Color Large Screen Display (CLSD) with mounting kit 55” CVN

Maintenance Table 1 1 $

Maintenance Assist Modules (MAMs) Cabinet, CY-8830C/S

1 1 $

MAMs Kit LSD, CVN, LPD, LHD 1 1 $

INCO Kit LSD, LPD, LHD 1 1 $

INCO Kit CVN $

TOTAL SUMMED VALUE FOR FY16: $

FY2017

(b) Purchased/Subcontracted Materials and Services. Provide a consolidated priced summary of individual material quantities included in the various tasks, orders, or contract line items being proposed and the basis for pricing (vendor quotes, invoice prices, etc.). Include raw materials, parts, components, assemblies, and services to be produced or performed by others. For all items proposed, identify the item and show the source, quantity, and price. Conduct price analyses of all subcontractor proposals. Conduct cost analyses for all subcontracts when cost or pricing data are submitted by the subcontractor. Include these analyses as part of your own cost proposal submissions. Submit the subcontractor cost or pricing data as part of your own cost or pricing data. These requirements also apply to all subcontractors if required to submit cost or pricing data.

(1) Adequate Price Competition. Provide data showing the degree of competition and the basis for establishing the source and reasonableness of price for those acquisitions (such as subcontracts, purchase orders, material order, etc.) priced on the basis of adequate price competition. For interorganizational transfers priced at other than the cost of comparable competitive commercial work of the division, subsidiary, or affiliate of the contractor, explain the pricing method (see FAR 31.205-26(e)).

(2) All Other. Provide data showing the basis for establishing source and reasonableness of price.

In addition, provide a summary of your cost analysis and a copy of cost or pricing data submitted by the prospective source in support of each subcontract, or purchase order. For standard commercial items fabricated by the offeror that are generally stocked in inventory, provide a separate cost breakdown, if priced based on cost. For interorganizational transfers priced at cost, provide a separate breakdown of cost elements. Analyze the cost or pricing data and submit the results of your analysis of the prospective source's proposal. When submission of a prospective source's cost or pricing data is required as described in this paragraph, it must be included along with your own cost or pricing data submission, as part of your own cost or pricing data. You must also submit any other

LSD

Class

Mod 5C

Total

Price

Equipment Description FY17

Tactical Computer Console (TCC) OJ-830 (V) 2

(LSD Config)

1 $

Common Display System (CDS) Variant “B”

Field Change 1 OJ-836/U

3 $

Tactical Computer Console OJ-830 (V) 1 1 $

Automated Status Board (ASTAB) DU-20B/S $

CDS VAB 3-Panel Insert Field Change 2 $

SAS Communication Panel Orbit 4 $

CDS Field Change Digital Video Interface

(DVI) LSD

3 $

CDS Field Change Push to Talk LSD 3 $

Color Medium Screen Display (CMSD) with mounting kit 42” LSD

3 $

Color Large Screen Display (CLSD) with mounting kit 55” CVN

Maintenance Table 1 $

Maintenance Assist Modules (MAMs) Cabinet, CY-8830C/S

1 $

MAMs Kit LSD, CVN, LPD, LHD 1 $

INCO Kit LSD, LPD, LHD 1 $

INCO Kit CVN $

TOTAL SUMMED VALUE FOR FY17: $

cost or pricing data obtained from a subcontractor, either actually or by specific identification, along with the results of any analysis performed on that data.

The following items are applicable to this modification:

VENDOR QUESTIONS/GOVT RESPONSE

For informational purposes, the following vendor questions and corresponding Government responses are being provided:

1. The RFP specifies Tactical Computer Console (TCC) OJ-830 (V) 2 (LSD Config) P/N 8499610-

1, but the TDP only defines 8499610 not the 8499610-1.

Response: The only difference in the dash numbers is the type of shocks that are put in.

2. The RFP specifies Tactical Computer Console (TCC) OJ-830 (V) 2 (CVN Config) P/N 8499610-

2, but the TDP only defines 8499610 not the 8499610-2.

Response: The only difference in the dash numbers is the type of shocks that are put in.

3. The RFP specifies Common Display System (CDS) Variant “B” Field Change 1 OJ-836/U

8501406. Is this for a Field Change 1 Kit only or for an OJ-836/U with Field Change 1 installed?

Note that item 1 as listed on the Government supplied TDP drawing 8501406 calls out the CDS console itself.

Response: The contractor will only be building the Field Change.

4. The RFP specifies Tactical Computer Console OJ-830 (V) 1 P/N 7455360. The TDP specifies

7455360-1, -2, -3, or -101. For which dash number is the RFP?

Response: Revision 1 to the TDP should have provided clarity.

5. The RFP specifies Automated Status Board (ASTAB) DU-20B/S P/N 7455391 but 7455391 is not in the TDP.

6. The RFP specifies MAMs Kit LSD, CVN, LPD, LHD however the Kit is not defined in the TDP.

7. The RFP specifies INCO Kit LSD, LPD, LHD however the Kit is not defined in the TDP.

8. The RFP specifies INCO Kit CVN however the Kit is not defined in the TDP.

9. Section G, PAYMENT INSTRUCTIONS does not indicate the possibility of progress payments. Would the Government consider including the potential of progress payments as identified in Federal Acquisition Regulations, Subpart 32.501-1 Customary progress payment rates and insert clause 52.232-16 & Alternate 1 as part of the solicitation?

Response: Amendment 2 to Solicitation N00178-14-R-3011 posted to FedBizOpps today which amends the solicitation to include Clause 52.232-16 and Alt I.

10. Section C, paragraph 4.5 stipulates that the contractor be ISO 9001 Certified and provide a Certification number. If the offeror is in the process of gaining that certification, but isn’t certified by the proposal submittal date but it is anticipated that they be certified by

Contract Award date: will this meet the Mandatory Requirements provision?

Response: Whether an offeror will be considered to have met this mandatory requirement will be based on the anticipated certification date at proposal submission and where the offeror is in the certification process.

11. Section E, INSPECTION AND ACCEPTANCE, sub-paragraph 3, indicates a performance of a “ping” test of the network is required. Will GFE test equipment be provided at the factory for the Inspection FQT or at the destination by the Government for the Acceptance FQT?

Response: The FQT will be conducted at the factory. The Government will supply the test procedures. The hardware which will be needed is a laptop and a network switch.

12. What is the anticipated contract award date?

Response: The anticipated contract start date is July 3, 2014.

13. Section E of the RFP indicates that product acceptance will take place at the delivery destination.

What will be the delivery destination?

Response: Delivery requirements will be specified per individual delivery order; however it will likely be either within the Norfolk/Virginia Beach, VA area.

14. Will form DD-250 be completed upon acceptance at the destination?

Response: No, please refer to Clause 252.232-7006 Wide Area Workflow Payment Instructions.

15. Does the Government require a Contractor Representative to be present for acceptance at the destination?

Response: No, the Government does not require contractor presence for acceptance.

16. Our supplier Aydin has informed us that Aydin part number 4442-A2-551-11L specified in the 42

Inch Large Screen Color Display Assembly (P/N 8499592) is no longer available for purchase. Aydin is prepared to supply Aydin part number 4442-A3-551-11L as a form, fit, and function replacement. Does the government accept the proposed replacement? If not please provide direction.

Response: Drawing No. 8499592-2 should reference Aydin P/N: 4442-A3-551-11L in lieu of 4442-A2-551-11L in the Technical Data Package (TDP). This correction is included in Amendment #3 to the solicitation.

17. The MAMS INCO list does not specify a quantity for each MAM item, are we to assume that the quantity for each item is one (1)?

Response: For clarification, MAMs Kit and INCO Kits - Offerors should price each item on the SSDS Mk2 Mod C

INCO MAM list individually (list is included on the TDP CD) for a quantity of one (1) each. Each item will be used in a CVN/LPD/LHD INCO and MAM kit and should be priced per each kit included in the planned hardware chart.

This clarification is included in Amendment #3 to the solicitation.

18. The same part numbers from the original TDP exist within Revision 1 of the TDP. However, there are no revision level changes or change documents. The original TDP contained red line markups and Revision 1 of the

TDP appears to be changes reflecting the original red lines. It will take some time to compare each drawing (from the original TDP file and Revision 1) to make sure. Is it possible to assume the revisions accurately reflect the original red line submissions?

Response: Revision 2 of the TDP provided clarification.

19. We see a MAMS INCO BOM but cannot identify the content of the individual required kits and request clarification:

MAMS Kit LSD, CVN, LPD, LHD

INCO Kit LSD, LPD, LHD

Response: Revision 2 of the TDP provided clarification.

20. The Automated Status Board (ASTAB) DU-20B/s, drawing #7455391 is the installation control drawing but does not define the DU-20B/S. Please provide the DU-20B/S.

Response: It is P/N 51-NAG01-002, which is reflected in Drawing No. 7455391. The ASSY DWG may also provide additional clarification. The revisions accurately reflect the original red line submissions; however they may also have new content due to a compiling issue.

21. The updated TDP is missing drawings for the following part numbers in the INCO MAM list:

P/N Description CAGE

8346893 FAN Assembly AID 53711

8499680 CCA PROCESSOR VP917 53711

8500953 /O GRAPHIC 53711

8500954 DVI-FIBER CONVERTER (Tx) 53711

8500957 CPU MODULE 53711

8500961 MEDIA MODULE 53711

8500973 Fiber Contact Relay (Rx) 53711

8500974 AC-DC Power Supply 53711

8501286-1 CONTROL MODULE 53711

8501286-2 CONTROL MODULE 53711

8501292 CCA PROCESSOR XCR15 53711

8501483 PTC MODULE ASSEMBLY 53711

8501483-101 PTC MODULE ASSEMBLY 53711

8521077 PDU 53711

8521083 Fiber Contact Relay (Tx) 53711

8521085 RHMI 53711

8562076-1 TERMINAL DATA PROC 53711

8565149 DVI to Fiber Converter (Rx) 53711

8600992 1U SYSTEL SERVER 53711

8600993 2U SYSTEL SERVER 53711

Response: The TDP package has been updated as Revision 2 to include 16 additional drawings which have been added to the MAMs folder.

22. The INCO MAM List has part 8499684 GE Fanuc VME 7809 Processor (IRIS) 53711. Drawing 8499684 calls out 79C0714-01 which is End Of Life (EOL). Will the government provide 79C0714-01 as GFM?

Response: The TDP package has been updated as Revision 2 to include 16 additional drawings which have been

23. Missing drawings:

7455391 AUTOMATED STATUD BOARD DELIVERABLE P/N

8578206 ASSEMBLY AID 8499610

8-17285 INSTALLATION DRAWING 8499610

8499650 CONFIGURE IAW 8499604

8578201

8501444

7455383 FOUNDATION MOUNTS, STEEL 7455360-3

8-15128 ISOLATOR, VIBRATION, PLATE MT, 4 LB LOAD, STEEL 8-16771

8499573 -9 LANYARD, CABLE MANAGEMENT 8499610

8623339 PUSH TO TALK, FUNCTIONAL DESCRIPTION 8501325

8623335-074 -2 DIVIDER KIT, SUBRACK, SUBASSY 8623335-073-3

52-12033-002 ASTAB, 19", DUAL VIDEO, LB, EMI GLASS 51-NAG01-002

52-11806-001 CHASSIS, BULKHD,

52-11994-001 CHASSIS, MDU, AC

50-09839-002 KIT, SINGLE FIBER SC

50-12167-002 KIT, KVM 2-PORT

43-11831-0301 PLATE, I/O BLANK

90-12234-101/201 NAME, PLT

90-12237-1003 NAME, PLT

Response: The TDP package has been updated as Revision 2 to include 16 additional drawings which have been

24. Our company understands that the Automated Status Board (ASTAB) DU-20B/S, Drawing #7455391 identifies the 51-NAG01-002 as the NAG, ASTAB. The 51-NAG01-002 assembly includes item numbers 11, 12, 13, 14, 15, 16, 19, 33, and 36.

a. Item 16 is not shown as being used in the field of the drawing.

b. Items 11 and 15 are identified on sheet 1 in the field of the drawing, but their use/installation in the 51-

NAG01-002 are unclear.

c. Drawings for items 11, 12, 13, 15, 16, and 19 have not been provided.

We would appreciate clarification.

Response: 51-NAG01-002 is the part number for the ASTAB assembly, all parts called out in the drawing are included with the assembly. The drawing is provided for reference purposes only.

25. If there are multiple contracts awarded, will a RFP be issued for each Delivery Order for which the contractor will be requested to submit a proposal to compete?

Response: The Government anticipates issuing an RFP for each resultant delivery order.

26. If there is a single contract awarded as a result of this solicitation, will there be RFP’s and subsequent contractor proposals required for each Delivery Order?

Response: The Government anticipates issuing an RFP for each resultant delivery order.

27. Item number 5 of the FIELD CHANGE 1, OJ-836/U DATA DISPLAY GROUP (P/N 8501406) is part number

208-7058-001. Part number 208-7058-001 does not have an associated drawing or parts list in the TDP. If this is a procured part, no vendor or CAGE is specified. Please provide a drawing and parts list for 208-7058-001 or specify a vendor(s).

Response: This is clarified in the new TDP.

28. Should the bidder include item number 20, the Model 4424-CDS Display, of the Tactical Computer Console

OJ-630(V)2 (P/N 8499610-1) or will the government provide this item as Government Furnished Material?

Response: This appears to be the old drawing. The display P/N is 356-7036-501 (PR3) and will not be GFM.

29. I tem number 38 of the Tactical Computer Console OJ-630(V)2 (P/N 8499610-1) is part number 8499573-9. The

-9 is not defined the 8499573 drawing.

Response: This is an error in the drawing. Offerors should use 8499573-2.

30. For the OJ-830(V)1 and OJ-830(V)2, drawing 7455360 and 8499610, respectively, the HS22 Blade Servers are end of life (specification control drawing 8499732-101). Will the government provide an ECP to replace this part?

Can the Government provide the part as Government Furnished Material?

Response: The replacement is (HS23E).

31. For the OJ-830(V)1, the Intrusion Protection Sensor, Cisco IPS-4255-K9 (see specification control drawing

8499704) is end of life. Will the Government provide an ECP to replace this part? Can the contractor provide a

Cisco refurbished and certified used part in lieu of a new part? Can the Government provide the part as Government furnished material?

Response: This will be Government furnished material.

32. Item numbers 18, 19, and 20 of the VIDEO CONVERTER MODULE, ASSEMBLY (P/N 8501324) are part numbers 8578193, 8578194, and 8578196. Part numbers 8578193, 8578194, and 8578196 are not defined in the

TDP. Please provide the drawings and parts lists for these parts.

Response: Revision 2 to the TDP’s provides this information.

33. The part number for item number 8 (M8 X 1.25 X 10 MACHINE SCREW) of the Color Medium Screen

Display (8499592) is not defined.

Response: These parts are supplied with the equipment.

34. Part numbers are not defined for items 7, 8, and 9 of the Color Large Screen Display (8501225).

Response: These parts are Installation Control Drawings (ICD) and will be provided by the shipyard.

35. Drawing 8623335-029 has FINDS 10, 11, and 12 which are not defined and are not referenced in the drawing.

We suspect that FINDS 10, 11, and 12 should be deleted from the drawing. Please confirm or provide the definition for the items.

Response: The updated TDP’s should provide clarity.

36. Page 6 of the RFP lists Automated Status Board (ASTAB) DU-20B/S Drawing # 7455391, however the TDP does not contain drawing 7455391. Please provide drawing 7455391.

Response: The updated TDP’s should include this information.

37. Page 6 of the RFP lists CDS VAB 3-Panel Insert Field Change 2 Drawing # 8501415, however this item is not listed in section L of the RFP and drawing 8501415 is not included in the TDP. Should the CDS VAB 3-Panel Insert

Field Change 2 be included in the proposal?

Response: The hardware chart for FY2015 under Clause Ddl-L31 inadvertently omitted the quantity of 13 units for the LHD 2, Mod 3C. Amendment 4 corrects Clause Ddl-L31 to include this change to the solicitation.

38. The INCO MAM List has part 8499684 GE Fanuc VME 7809 Processor (IRIS) 53711. Drawing 8499684 calls out 79C0714-01 which is also EOL. If this will be provided as GFM please verify that we are not to include a cost for it in our proposal.

Response: 79C0714-01 updated P/N XCR15.