Fiber_Board_-_Technical_Requirements.doc

Synopsis N00178-14-Q-4495

Technical Requirements for cellulose fiberboard:

Line Item 1

· ½” x 48” x 96” dimensions

· Low density cellulose fiberboard (9.6 - 10.6 oz per square foot or 19.2 - 21.2 lb per sheet)

· Light color

· Primed white on one side only

· Smooth surface with no perforations

· Supplier provide a sample prior to contract award

· Quantity – 4224 units total Packaging requirements:

· White face shall be oriented in one direction, six (6) each wrapped in paper, with sixteen (16) of these to form a bundle Line Item 2

· Low density cellulose fiberboard panels (maximum density 18 lbm/ft3)

· Panel dimensions: ½-in x 48-in x 144-in

· Light tan color

· Smooth pressed surface on one face; smooth, lightly-textured surface on opposite face

· Supplier shall provide sample prior to contract award

· Quantity – 4608 units total

· Delivered in bundles consisting of 84 sheets (minimum) per bundle

· The panels in each bundle shall be oriented with smooth pressed surfaces facing in the same direction

· Each bundle shall be protected from water intrusion using shrink-wrap plastic

Line Item 3 – Shipping Cost