E3-0107 FIBER OPTIC SOW.pdf

FIBER OPTIC CABLE

STATEMENT OF WORK

1.0 General

1.1 Introduction

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is the Department of

Defense (DoD) Energetics Center and serves as the DoD Explosive Ordnance Disposal

Technology Program lead.

NSWC IHD provides research, development, engineering, manufacturing, test, evaluation and in-service support of energetics and energetic materials (chemicals, propellants and explosives) for ordnance, warheads, propulsion systems, pyrotechnic devices, fuzzing, electronic devices, Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PADs), Packaging, Handling, Storage, and Transportation (PHS&T), gun systems and special weapons for Navy, Joint Forces, and the Nation.

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) Energetics

Manufacturing Department has a requirement for improving its fiber optic network throughout the base. The Plant Watch/Oven Watch Network needs to replace outdated or damaged fiber cables, and add connectivity to ensure a resilient/redundant network design.

1.2 Scope of Work

The requirements in this document contain the information for a vendor to provide brand name mandatory Netceed, Corning, and Netsource items are requested for improving fiber optic infrastructure items needed for use at NSWC IHD.

2.0 Applicable Documents

2.1 Conflicting Document Requirements

If there are any conflicts between specifications, drawings, or requirements listed herein, the contractor shall notify the Contracting Officer (KO) and the Technical Point of Contact (TPOC), in writing for interpretation, clarification, and resolution.

3.0 Requirements

The table below lists the required items by description, part number, and quantity.

Item

Description/Part Number* Qty

1 Netceed NI002559 (Comstar BOLTSTRAND1/4) ¼" EHS Galvanized Strand, 5000' Reel 10

2 Netceed NI002610 (Comstar BOLTLASHWIRE045430) .045 Type 430 Lashing Wire 1200'

Coil (6 coils/bx)

3 Netceed NI002615 (Comstar BOLTCLAMPDLASH) D Lashing Clamp "bugs" 50

4 Netceed NI002613 (Comstar BOLTBMACHINE5/8X14) 5/8 Inch x 14 Inch Machine Bolt galvanized

5 Netceed NI002612 (Comstar BOLTBMACHINE5/8X16) 5/8 Inch x 16 Inch Machine Bolt 50 galvanized

6 Netceed NI002567 (Comstar BOLTBMACHINE5/8X18) 5/8 Inch x 18 Inch Machine Bolt galvanized

7 Netceed NI002673 (Comstar BOLTBMACHINE5/8X20) 5/8 Inch x 20 Inch Machine Bolt galvanized

8 Netceed NI002745 (Comstar BOLTBMACHINE5/8X22) 5/8 Inch x 22 Inch Machine Bolt galvanized

9 Netceed NI002739 (Comstar BOLTBMACHINE5/8X24) 5/8 Inch x 24 Inch machine Bolt galvanized

10 Netceed NI002571 (Comstar BOLTCLAMPSUSPSTR) Straight Suspension Clamp, 1/2 Inch x 5-3/4 Inch, Galvanized

11 Netceed NI002570 (Comstar BOLTNUTSQUARE) 5/8 Inch Square Nut galvanized 3500

12 Netceed NI002593 (Comstar BOLTWASHERSQ5/8X2) 2" Square Washer 5/8 galvanized 3500

13 Netceed NI002676 (Comstar BOLTSTRANDVISE1/4) ¼" Automatic Dead End All

Grades Strand "quickie"

14 Netceed NI002642 (Comstar BOLTCLAMPSUSPFIG8) Figure 8 Suspension Clamp 50

15 Netceed NI002287 (BOLTDELTECCSS50R) Deltec Strapping 50 Foot Roll 10

16 Netceed NI002216 (BOLTDELTECLH) Deltec Locking Heads for Strapping (25/PK) 20

17 Netceed NI000050 (Comstar BOLTTREEGUARD6) Tree Guard 2" x 6' 50

18 Netceed NT002403 (PUL1800P5K) Cable Pulling Tape 1800lb - 5000ft 2

19 Netceed NT002435 (PUL1800TRACER3K) Cable Pulling Tape 1800lb Detectable - 3000ft 2

20 Greenlee Power Fishing System 690-15 (690) (15' Hose) 1

21 3M Cable Ties CT15BK120-C Black 15in long x .3W, Nylon, 120lb tensile 10

22 Corning Altos Loose Tube 012EU4-T4701D20 S-OP-12-LT-A-3U-BK-SIC-B-Cut Reel (/ft) 5,000

23 Corning Altos Loose Tube 024EU4-T4701D20 S-OP-24-LT-A-3U-BK-SIC-B CUT REEL

(/ft)

20,000

24 Corning Altos Loose Tube 048EU4-T4701D20 20,000

25 Corning Altos Loose Tube 096EU4-T4701D20 OSP – S-OP-96-LT-A-4E-BK-SIC-8-Cut

Reel (/ft)

20,000

26 Corning Altos Loose Tube 144EU4-T4701D20 OSP – S-OP-144-LA-A-3E-BK-SIC-CUT

REEL (/ft)

20,000

27 Corning Altos Loose Tube 288EU4-T4701D20

28 3M 2178-LS 80-6114-8652-5 80-6109-3315-4 (ea) 10

29 3M 2524-FT 80-6106-1687-4 (ea) 100

30 Corning FAN-BT25-12 (per 12 strands) 200

31 Corning 95-200-41-Z - Single Mode SC Fiber Connectors (25pk) 100

32 Corning 95-200-51-Z - Single Mode ST Fiber Connectors (25pk) 10

33 Corning CCH-01U – Rack Mount Fiber Panel (2 CCH panels) 10

34 Corning CCH-02U – Rack Mount Fiber Housing (4 CCH panels) 10

35 Corning CCH-04U – Rack Mount Fiber Housing (12 CCH panels) 100

36 Corning CCH-CP12-59 – 12 Port SM SC Bulkhead 10

37 Corning SPH-01P Wall Mount Single Panel Housing (12 strand bulkhead) 10

38 Corning WCH-02P Wall Mount Connector Housing (24 strand with SC) 10

39 Corning WCH-04P Wall Mount Connector Housing (48 strand with SC) 10

40 Corning WCH-06P Wall Mount Connector Housing (72 strand with SC) 10

41 Corning WCH-CLSSC-12P Wall Mount Connector Housing (144 strand with SC) 10

42 Netsource FASM-LCSC-1M 40 laura.a.adams Highlight

43 Netsource FASM-LCSC-2M 40

44 Netsource FASM-LCSC-5M 40

45 Netsource FASM-LCSC-10M 40

46 Netsource FASM-SCSC-1M 40

47 Netsource FASM-SCSC-2M 40

48 Netsource FASM-SCSC-3M 40

49 Netsource FASM-SCSC-5M 40

50 Netsource FASM-SCSC-10M 40

3.1 Specifications

3.1.1 General

The Offeror shall be able to provide all required fiber optic infrastructure items.

3.2 Acceptance

The Government shall perform a visual inspection to ensure the deliverables are free of rust, damage, or any obvious defects. Inspection shall be completed within 15 working days of receipt of all deliverables. Contractor invoicing may occur as many as 30 working days after acceptance of deliverables.

The Government shall alert the Contractor to any nonconforming deliverables within one (1) working day of identifying the nonconformity. The Contractor shall respond to with their recommended disposition on the deliverables within one (1) working day.

3.3 Warranty

All electronics shall be protected by at least a 1-year manufacturer’s warranty. The warranty shall be void if any unapproved alterations have been made to the equipment.

3.4 Shipping

The vendor shall be responsible for shipping container design, and purchase of all packing and packaging materials. The packing shall prevent any damage which may occur during transit.

4.0 Deliverable

The Technical Point of Contact and Contracting Officer (KO) for this contract will approve all deliverables as specified herein.

4.1 Material Delivery

The Contractor shall notify the Contracting Officer 30 days in advance if the Contractor cannot meet the contract delivery schedule. The Contractor shall be responsible for coordinating and shipping all the equipment to the required destination.

Delivery address provided below:

Naval Surface Warfare Center Indian Head Division

4522 McMahon Road

Bldg. 116, Suite 100

Indian Head, MD 20640