SOW - ECMP519 Oven Watch Transmitters.pdf
PDF 65 KB Posted
- Attached to
- ECMP 519 OVEN WATCH TRANSMITTERS
- Solicitation number
- N0017424R0156
About this file
This document is a Statement of Work (SOW) for the procurement of temperature, pressure, and flow transmitters required by the Naval Surface Warfare Center, Indian Head Division (NSWC IHD) to improve Oven Watch monitoring of steam lines.
The SOW specifies the required Rosemount and Endress+Hauser transmitters by part number and quantity. It outlines the general requirements, including that the vendor must be an authorized supplier of the specified products. The acceptance criteria, warranty, and shipping responsibilities are also detailed. The deliverables must be provided to the NSWC IHD within the contract delivery schedule. This SOW is associated with the federal contract opportunity Solicitation Number N0017424R0156 "ECMP 519 OVEN WATCH TRANSMITTERS" issued by the Department of the Navy Naval Sea Systems Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ-N0017424R0156 - ECMP519 OVEN WATCH TRANS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OVEN WATCH TRANSMITTERS
STATEMENT OF WORK
1.0 General
1.1 Introduction
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is the Department of
Defense (DoD) Energetics Center and serves as the DoD Explosive Ordnance Disposal
Technology Program lead.
NSWC IHD provides research, development, engineering, manufacturing, test, evaluation and in-service support of energetics and energetic materials (chemicals, propellants and explosives) for ordnance, warheads, propulsion systems, pyrotechnic devices, fuzzing, electronic devices, Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PADs), Packaging, Handling, Storage, and Transportation (PHS&T), gun systems and special weapons for Navy, Joint Forces, and the Nation.
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) Energetics
Manufacturing Department has a requirement for temperature, pressure, and flow transmitters.
These are needed to improve Oven Watch monitoring of steam lines.
1.2 Scope of Work
The requirements in this document contain the necessary information necessary for a vendor to provide temperature and pressure transmitters for use at NSWC IHD.
2.0 Applicable Documents
2.1 Conflicting Document Requirements
If there are any conflicts between specifications, drawings, or requirements listed herein, the contractor shall notify the Contracting Officer (KO) and the Technical Point of Contact (TPOC), in writing for interpretation, clarification, and resolution.
3.0 Requirements
The table below lists the required Rosemount and Endress+Hauser items by description, part number, and quantity.
Item
Description/Part Number* Qty
1 Endress+Hauser Pressure Transmitter/PMP71-SAC1P61RDAAU72 10
2 Rosemount Temperature Transmitter/3144PD1A1K5B4M5HR7 10
3.1 Specifications
3.1.1 General
The Offeror shall be an authorized Rosemount and Endress+Hauser supplier, able to sell and provide Rosemount and Endress+Hauser hardware.
3.2 Acceptance
The Government shall perform a visual inspection to ensure the deliverables are free of rust, damage, or any obvious defects. Inspection shall be completed within 15 working days of receipt of all deliverables. Contractor invoicing may occur as many as 30 working days after acceptance of deliverables.
The Government shall alert the Contractor to any nonconforming deliverables within one (1) working day of identifying the nonconformity. The Contractor shall respond to with their recommended disposition on the deliverables within one (1) working day.
3.3 Warranty
All electronics shall be protected by at least a 1-year manufacturer’s warranty. The warranty shall be void if any unapproved alterations have been made to the equipment.
3.4 Shipping
The vendor shall be responsible for shipping container design, and purchase of all packing and packaging materials. The packing shall prevent any damage which may occur during transit.
4.0 Deliverable
The Technical Point of Contact and Contracting Officer (KO) for this contract will approve all deliverables as specified herein.
4.1 Material Delivery
The Contractor shall notify the Contracting Officer 30 days in advance if the Contractor cannot meet the contract delivery schedule. The Contractor shall be responsible for coordinating and shipping all the equipment to the required destination.
Delivery address provided below:
Naval Surface Warfare Center Indian Head Division
4522 McMahon Road
Bldg. 116, Suite 100
Indian Head, MD 20640
File details come from the government source that posted it. Updated .