MK85_Nozzels__Final_Solicitation_N00174-19-R-0106.docx

N0017419R0106

Section B - Supplies or Services and Prices

First Article Test Sample

FFP

MK85 Nozzels including: 10 Nozzles, two (2) Nozzle bodies and two (2) Carbon Inserts in accordance with the Statement of Work (SOW) and drawings.

FOB: Destination

NET AMT

Production Quantities (Base Year)

Production QTY (Base Year) In accordance with the SOW and drawings.

NET AMT

STEPLADDER PRICING

CDRLs (Base Year)

Contract Data Requirements List (CDRLS) in accordance with A0001 through A0004 and the SOW

NET AMT

FFP

Option 1: In accordance with the Statement of Work (SOW) and drawings.

NET AMT

FFP

Option 1: In accordance with the Statement of Work (SOW) and drawings.

NET AMT

FFP

Option I: Production QTY in accordance with the SOW and drawings.

NET AMT

FFP

NET AMT

FFP

Option 2: In accordance with the Statement of Work (SOW) and drawings.

NET AMT

FFP

Option 2: In accordance with the Statement of Work (SOW) and drawings.

NET AMT

FFP

Option 2: Production QTY in accordance with the SOW and drawings.

NET AMT

FFP

NET AMT

Section C - Descriptions and Specifications

STATEMENT OF WORK

Statement of Work for MK 85 Nozzle Assembly

1.0 INTRODUCTION

This Statement of Work (SOW) establishes and defines the requirements for fabrication, test, inspection, and shipment of MK 85 Nozzles, drawing number 1638AS302. The parts and drawings that make up the assembly are the Nozzle Body (1638AS303), Carbon Insert (1638AS304), Weather-Seal (1638AS305), and Carbon-Graphite (1638AS307).

1.1 SCOPE

The MK 85 Nozzle is designed as an outlet for the rocket motor. The nozzle body is made of steel, SAE 4130 per SAE AMS 6370, hardness RC 20-30. The Weather Seal is made of aluminum and mylar. The nozzle must be manufactured in accordance to the drawings and all applicable documents identified under Section 1.2.

The contractor who is awarded the contract will purchase the materials, fabricate, assemble, perform in-process inspection, acceptance tests, and package nozzles.

1.2 APPLICABLE DOCUMENTS

* Copies of Government documents are available online at http://quicksearch.dla.mil/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094

2.0 REQUIREMENTS

2.1 MANUFACTURE, INSPECT, & SHIPMENT REQUIREMENTS

This section discusses the requirements for manufacture, inspection, and shipment/delivery of nozzles. A first article sample maybe required. A sample of 10 nozzles, 2 carbon inserts and 2 nozzle bodies shall be sent to the Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) before full production of nozzles at the quantities specified in the matrix below. If parts are inspected and rejected by NSWC IHEODTD, the vendor is liable for re-inspection costs.

2.1.1 Nozzles

The Contractor shall perform a dimensional analysis of Nozzle Body (1638AS303), Carbon Insert (1638AS304), and Weather-Seal (1638AS305) prior to assembly. Actual measured dimensions and a sampling plan measurement of all characteristics shall be listed on a copy of a Final Inspection Plan (CDRL A001) as developed by the contractor.

Each contract year a quantity of Nozzles requested per the matrix below shall be manufactured and delivered in accordance with drawing 30003-1638AS302 Rev. A according to the delivery schedule.

Nozzle Quantity Matrix 150 to 249

250 to 349

350 to 449

450 to 550

2.1.2 Certification and Dimensional Inspection

The contractor shall provide a Certification of Analysis (COA) in accordance with Contract Data Requirements List (CDRL) A002 to drawings and specifications to NSWC IHEODTD for each delivery.

2.1.3 Lot Numbering

The contractor shall assign and mark each delivery with a Lot number per MIL-STD-1168. The appropriate lot number shall be listed on each certification of analysis.

2.1.4 Packaging

Each pallet shall be permanently labeled with: “MK 85 Mod 0 Motor Hardware”, drawing number with revision, item description or component part name, manufacturer name, contract number, lot number per MIL-STD-1168, quantity per pallet, and weight. Pallet of components shall be stretched wrapped on pallets to commercial standards.

2.1.5 Number of Nozzle Lots per CLIN

All nozzles delivered per contract line item number (CLIN) shall be manufactured as a single production lot.

2.2 DOCUMENTATION

The contractor shall provide the documentation as specified by the attached CDRL DD 1423.

2.2.1 Requests for Variance

The contractor shall prepare requests for variations as necessary to request proposed changes to the specified engineering requirements or to document the as-built configuration. Request for variations are a deliverable per CDRL A003.

2.2.2 Quality Assurance Program Plan

A Quality Assurance Program Plan shall be written and submitted by the contractor. This document shall address all aspects of production, testing, and inspection as called out in the technical data package and this statement of work. This document shall be submitted within 30 days of contract award. All production, inspection, and testing shall adhere to the requirements of this document. If any changes are made to the Quality Assurance Program Plan during the use of this contract, the contractor shall notify NSWC/IHD in writing of these changes. Changes to the Quality Assurance Program Plan could result in the necessity of additional first article testing. This additional first article sample and test series shall be at the vendor’s expense. The Quality Assurance Program plan is a deliverable per CDRL A004.

2.2.3 Progress Reports

The contractor shall submit monthly progress reports to the Contracting Officer and the Technical POC. These reports shall be the vehicle where by the Navy may be appraised as to work accomplished, work remaining, key personnel changes, milestone achievement, quality problems, raw material procurement schedules, tooling plans, and potential design changes. This report cycle starts on the award date of the contract and continues until the contract is completed.

2.3 FIRST ARTICLE TESTING

The contractor must submit 10 nozzles (1638AS302), 2 carbon inserts (1638AS304)and 2 nozzle bodies (1638AS303) for evaluation. The First Article submission shall be performed after contract award and prior to production. The units submitted shall be production representative. This means that the first articles shall be manufactured and processed using the same materials, processes and procedures that will be used during full-scale production. If at any time, a first article test unit fails to meet the requirements of Drawing 1638AS302, applicable specifications, SOW, and/or contract, the first article lot submission will be rejected without further testing.

2.3.1 First Article Approval

The Government will conduct all first article approval testing and will relay test results to contractor within 30 calendar days after receipt of the first article test units. Once the First Article of an item is approved/accepted, the Contractor shall not change sub-contractors without prior approval from the Government.

First Article Test Results

The contractor shall perform a visual inspection on each first article units submitted. The inspection will be used to identify scratches, dents, paint chips, peeling paint, and any anomalous conditions. This inspection by itself will not be used to disposition the first article submission.

2.3.2.2 Dimensional Inspection

A dimensional inspection will be conducted by Receipt Inspection on each first article submitted. The inspection will measure all critical, major, and minor characteristics per drawings 1638AS302, 1638AS303, 1638AS304. Failure to meet any critical, major, or minor dimensional characteristic will result in the rejection of the first article lot.

2.3.2.3 Weather-Seal Test

A weather-seal test will be conducted on all five of the first article test units after completion of Steps 2.3.2.1 and 2.3.2.2 by the Government. This inspection will test for weather seal durability by putting a 15 psi air pressure load on the seal for three (3) minutes. If the seal ruptures or shows signs of leakage after the test, the first article will be rejected.

2.4 Production Work

2.4.1 Testing of Steel

If a change in steel manufacturer is made from previous production work, all first-article testing called out in Section 2.3 shall be performed by the contractor and at the contractor’s expense. All first-article test results shall be submitted to the procuring activity for acceptance before production can start.

2.4.2 Certificates of Analysis

The contractor shall provide a lot acceptance test report and certificates of analysis summarizing all the data collected per the document provided in Section 2.3.2 (First Article). The dimensional attributes for all critical, major, and minor characteristics shall be included in the test report. These reports are a deliverable per CDRL A002.

3.0 QUALITY ASSURANCE PROVISIONS

3.0.1 Responsibility for Inspection

Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the contractor may utilize his own facilities or any commercial laboratory acceptable to the Government. The Government reserves the right to perform any of the inspections set forth in the specifications or drawings. The test procedures called out in drawing 1638AS302 or this statement of work are the standards by which all testing shall be performed.

3.0.2 Government Inspection of Facilities

The Government, through any authorized representative, may visit the plant or plants of the contractor or of any subcontractors engaged in the performance of this contract.

If the Government on the premises of the contractor/subcontractor makes any examination/test, the contractor shall provide and require subcontractors to provide all reasonable facilities and assistance for the safety and convenience of the Government inspectors in the performance of their duties. All examinations and tests by the Government shall be performed in such a manner as will not unduly delay work.

4.0 DELIVERABLES

Documentation deliverables as specified herein shall be delivered to the Technical Point of Contact, for arrangement of review and approval/acceptance Deliverables

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

C-202-H001 ADDITIONAL DEFINITIONS–BASIC (NAVSEA) (OCT 2018)

(a) Department means the Department of the Navy.

(b) Commander, Naval Sea Systems Command means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.

(c) References to The Federal Acquisition Regulation (FAR) All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(d) National Stock Numbers Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

(1) National Item Identification Number (NIIN). The number assigned to each approved Item Identification under the Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit nonsignificant number.

(2) National Stock Number (NSN). The National Stock Number (NSN) for an item of supply consists of the applicable four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.

(End of text)

C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (NAVSEA) (OCT 2018)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as “protected information”. File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

C-209-H003 WAIVER OF FIRST ARTICLE REQUIREMENTS (NAVSEA) (OCT 2018)

If the First Article is waived by the Government, the Contractor shall deliver supplies that are identical or substantially identical to those previously accepted by the Government under the following contract(s):

(Offeror to fill in contract number(s), as applicable. See Section M)

(End of Text)

C-211-H017 UPDATING SPECIFICATIONS AND STANDARDS (NAVSEA) (DEC 2018)

The contractor may request that this contract be updated to include the current version of the applicable specification or standard if the update does not affect the form, fit or function of any deliverable item or increase the cost/price of the item to the Government. The contractor should submit update requests to the Procuring Contracting Officer with copies to the Administrative Contracting Officer and cognizant program office representative for approval. The contractor shall perform the contract in accordance with the existing specifications and standards until notified of approval/disapproval of its request to update by the Procuring Contracting Officer. Any approved alternate specifications or standards will be incorporated into the contract.

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

C-242-H001 EXPEDITING CONTRACT CLOSEOUT (NAVSEA) (OCT 2018)

(a) As part of the negotiated fixed price or total estimated amount of this contract, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $1,000 or less at the time of final contract closeout. The term "residual dollar amount" shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party may be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

C-246-H002 GOVERNMENT USE OF CONTRACTOR’S INSPECTION EQUIPMENT (NAVSEA) (OCT 2018)

The contractor's gages, measuring, and testing devices shall be made available to the Government when required to determine contractor conformance with contract requirements. If conditions warrant, the contractor’s personnel shall be made available for operation of such devices and for verification of their accuracy and condition.

Section D - Packaging and Marking

Data to be delivered by Integrated Digital Environment (IDE) or other electronic media shall be as specified in the contract.

All unclassified data to be shipped shall be prepared for shipment in accordance with best commercial practice.

Classified reports, data, and documentation shall be prepared for shipment in accordance with National Industrial Security Program Operating Manual (NISPOM), DOD 5220.22-M dated 28 February 2006 with Change 2 dated 18 May 2016.

D-211-H005 IDENTIFICATION MARKING OF PARTS – ALTERNATE I (NAVSEA) (OCT 2018)

(a) For all parts not subject to the marking requirements in DFARS 252.211-7003 – Item Unique Identification and Valuation, marking shall be accomplished in accordance with the following:

(1) Parts not manufactured to Government specifications shall be marked in accordance with generally accepted commercial practice.

(2) Parts manufactured to Government specifications shall be marked as follows:

(i) Electrical Parts - that is, all parts in electrical equipment and electrical parts when used in equipment which are not electrical in nature (e.g., electric controls and motors in a hydraulic system) - shall be identified and marked in accordance with MIL-STD-1285D(2) dated 22 June 2018, or, where MIL-STD-1285D(2) does not cover such a part, in accordance with MIL-STD-130N(1) dated 16 November 2012. Requirements of MIL-STD-1686C dated 25 October 1995 for Electrostatic Discharge Control shall be addressed.

(ii) Electronic Parts - that is, all parts in electronic equipment and electronic parts when used in equipment which are not electronic in nature (e.g., electronic fuel controls in some engines) - shall be identified and marked in accordance with Requirement 67 of MIL-HDBK-454B dated 15 April 2007 with Notice 1 dated 12 December 2012. Requirements of MIL-STD-1686C for Electrostatic Discharge Control shall be addressed.

(iii) Parts other than electrical or electronic parts (as described above) shall be identified and marked in accordance with MIL-STD-130N(1).

(b) In cases where parts are so small as not to permit identification marking as provided above, such parts shall be appropriately coded so as to permit ready identification.

(End of Text)

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018)

Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.

E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018)

Item(s) 0001 through 0007 - Inspection and acceptance shall be made at destination by a representative of the Government.

E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018)

The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements.

E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019)

Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative.

E-246-W001 CERTIFICATE OF ANALYSIS (NAVSEA) (OCT 2018)

(a) A certificate of analysis/test showing that the material has been sampled and/or tested and found to be within the minimum requirements of the specification/drawing/contract shall be submitted to the COR or TPOC. The certificate shall be maintained by the contractor for a minimum of one (l) year; one (1) copy to accompany the shipment (in the packing list envelope) and one (1) copy mailed at time of the shipment (mark the certificate to the attention of: Code 00Q).

(b) Each certificate must be traceable to the material covered by the certificate. The certificate shall state, above the signature of a legally authorized representative of the company the following:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.

(c) Beneath the signature include the typed name of the individual signing this certificate.

(d) Certificate for shipments of bulk chemicals shall state contract number, drawing or specification number, lot number, rail car number if shipped by rail or trailer number if by truck, and the date of shipment.

(e) Any demurrage accrued as a result of detaining commercial carriers because of nonreceipt of the certificate shall be the responsibility of the Contractor.

(f) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.

(g) The certificate shall read as follows:

I certify that on ______ [insert date], the ____ [insert Contractor’s name] furnished the supplies called for by the Order/Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies have been sampled and/or tested and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document.

Date of Execution: ________________________________ Signature: _______________________________________ Typed Name: ____________________________________ Title: ___________________________________________

E-246-W006 SAMPLING OF RECEIVED MATERIAL – ORDNANCE MATERIAL AND ORDNANCE COMPONENT PARTS (NAVSEA) (OCT 2018)

(a) When NAVSEA, Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division receipt inspects ordnance material and/or ordnance component parts, under this contract, for rockets, missiles and their related component parts; the sampling plan utilized shall be as outlined in the technical data package or as otherwise specified in other applicable controlling documentation. If the sampling plan is not specified within any applicable controlling documentation the sampling plan and the sampling size shall be as outlined in the specification checked below:

☐ ASQ Z1.4 (ANSI/ASQ Z1.4 -2003 (R2013) - OCTOBER 2013):

Critical: 100% Major:

Minor:

(b) In all cases the acceptance number of defects will be ZERO (0), the entire lot will be rejected for any defect unless specifically otherwise specified by the inspection type and code.

(c) Notwithstanding the above, NAVSEA, Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division may, at its discretion, accept a defect on an approved waiver on a case-by-case basis.

Section F - Deliveries or Performance

DELIVERY INFORMATION

RECEIVING

4522 MCMAHAN ROAD B116

INDIAN HEAD MD 20640-5125

301-744-4221

N00174

F-211-H021 DELIVERY OR PERFORMANCE (NAVSEA) (MAR 2019)

For proposal purposes the estimated date of task order award is August 30, 2019. The government reserves the right to award sooner or later if necessary. The start and end dates below will be updated accordingly upon task order award.

Base Year: August 30, 2019 – August 29, 2020 Option 1: August 30, 2020 - August 29, 2021 Option 2: August 30, 2021 – August 29, 2022

(End of Text)

Section G - Contract Administration Data

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Not applicable

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

G-216-H002 ORDERS (NAVSEA) (MAR 2019)

(a) General. Orders for supplies or services specified in Section B of the Schedule may be issued by the Contracting Officer at any time during the effective period of this agreement. Except as otherwise provided in paragraph (d) below, the Contractor agrees to accept and perform orders issued by the Contracting Officer within the scope of this agreement. It is understood and agreed that the Government has no obligation under the terms of this agreement to issue any orders. Except as otherwise provided in any order, the Contractor shall furnish all materials and services necessary to accomplish the work specified in each order issued hereunder; provided, however, that this agreement shall not be used for the furnishing of supplies or services which are covered by any "guaranty" or "warranty" clause(s) of the contract(s) under which the supplies were manufactured. In the event of any inconsistency between any order and this agreement, this agreement shall take precedence. All requirements of this agreement shall be applicable to all orders issued hereunder. Wherever the word "contract" appears in this agreement, it shall be deemed to include within its meaning the word "order", and each order shall be considered a separate binding contract as of its effective date. The Contractor shall segregate the costs incurred in the performance of any order issued hereunder from the costs of all other orders issued under this agreement.

(b) Ordering. Orders and revisions thereto shall be made in writing and be signed by any authorized Contracting Officer for activities cited in paragraph (i). Each order shall:

(1) set forth detailed specifications or requirements for the supplies or services being ordered, (or reference applicable specifications or requirements in Section C of this agreement), and, shall refer to the appropriate item under Section B of this agreement;

(2) set forth quantities being ordered;

(3) set forth preservation, packaging and packing instructions, if any;

(4) set forth delivery or performance dates;

(6) set forth either the amount or, in the case of an undefinitized order, the definitization schedule and both the monetary limitation on Government liability for the undefinitized order and the maximum ceiling amount at which the order may be definitized;

(7) set forth appropriation and accounting data for the work being ordered;

(8) set forth any discount offered for prompt payment;

(9) be dated;

(10) be identified by number in accordance with DFARS 204.7004;

(11) set forth the property, if any, to be furnished by the Government and the date(s) such property is to be delivered to the Contractor;

(12) set forth the disbursing office where payment is to be made and other applicable contract administration data;

(13) cite the applicable circumstance or exception and the justification control number. Orders for items not identified in the class justification, or an individual justification, and the basic ordering agreement are unauthorized (applies to BOA orders only);

(14) be issued on an SF 26 or a DD Form 1155; and

(15) set forth any other pertinent information.

(c) Orders. Orders may be issued on a fixed price or cost reimbursable basis at the discretion of the Contracting Officer to the extent permitted by the CLIN structure. Except as otherwise provided in paragraph (e) below, the Contractor shall not begin any work on an order until a firm priced order or an estimated cost and fixed fee order is issued by the Contracting Officer. Upon receipt of a proposed order, the Contractor shall promptly submit to the Contracting Officer a proposal for the work specified in the order. The Contractor agrees that it will submit such cost or pricing data as the Contracting Officer may require. Promptly after receipt of the Contractor's proposal and supporting cost or pricing data, if required, the Contractor and the Contracting Officer shall negotiate and agree upon a price and delivery schedule for the work being ordered. The price and delivery schedule, as agreed upon, shall be set forth in the priced order and the order shall be signed by both the Contracting Officer and the Contractor. Upon receipt of the order, the Contractor shall promptly commence work and shall diligently complete it.

(d) Rejection of Unilateral Orders. The Contractor may reject any unilateral order if the Contractor determines it cannot feasibly perform the order, or if it does not concur with the maximum ceiling amount. However, each unilateral order shall be deemed to have been accepted by the Contractor unless within fifteen (15) days of issuance of the order the Contractor notifies the Contracting Officer in writing of its rejection of the order.

(e) Undefinitized Orders. Whenever the Contracting Officer determines that urgent demands or requirements prevent the issuance of a definitized order, the Contracting Officer may issue an unpriced order. Such order may be unilateral or bilateral and shall establish a limitation on Government liability, a maximum ceiling amount and a schedule for definitization, as described in subparagraph (f)(2) below. Upon request, the Contractor shall submit a maximum ceiling amount proposal before the undefinitized order is issued. The maximum ceiling amount is the maximum price at which the order may be definitized. Except as provided in paragraph (d) above, the Contractor shall commence performance of the order upon receipt. The clause entitled "Contract Definitization" (DFARS 252.2177027) shall be included in any undefinitized order.

(f) Definitization of Undefinitized Orders.

(l) The Contractor agrees that following the issuance of an undefinitized order, it will promptly begin negotiating with the Contracting Officer the price and terms of a definitive order that will include: (A) all clauses required by regulation on the date of the order; (B) all clauses required by law on the date of execution of the definitive order; and, (C) other mutually agreeable clauses, terms and/or conditions. No later than sixty (60) days after the undefinitized order is issued, the Contractor shall submit a cost proposal with sufficient data to support the accuracy and derivation of its price; and, when required by FAR or the Contracting Officer, cost or pricing data. If additional cost information is available prior to the conclusion of negotiations, the Contractor shall provide that information to the Contracting Officer. The amount agreed upon shall be set forth in a bilateral modification to the order. In no event shall the amount exceed the maximum ceiling amount specified in the undefinitized order.

(2) Each undefinitized order shall contain a schedule for definitization which shall include a target date for definitization and dates for submission of a qualifying proposal, beginning of negotiations and, if appropriate, submission of makeorbuy and subcontracting plans and cost or pricing data. Submission of a qualifying proposal in accordance with the definitization schedule is a material element of the order. The schedule shall provide for definitization of the order by the earlier of:

(i) specified target date which is not more than 180 days after the issuance of the undefinitized order. However, that target date may be extended by the Contracting Officer for up to l80 days after the Contractor submits a qualifying proposal as defined in DFARS 2l7.740l; or

(ii) the date on which the amount of funds obligated by the Government under the undefinitized order exceeds fifty percent (50%) of the order's maximum ceiling amount.

(3) If agreement on a definitive order is not reached within the time provided pursuant to subparagraph (f)(2) above, the Contracting Officer may, with the approval of the Head of the Contracting Activity, determine a reasonable amount in accordance with Subpart l5.4 and Part 3l of the FAR, and issue a unilateral order subject to Contractor appeal as provided in the "Disputes" clause (FAR 52.2331). In any event, the Contractor shall proceed with completion of the order, subject to the "Limitation of Government Liability" clause (FAR 52.21624).

(g) Limitation of Government Liability.

(l) Each undefinitized order shall set forth the limitation of Government liability, which shall be the maximum amount that the Government will be obligated to pay the Contractor for performance of the order until the order is definitized. The Contractor is not authorized to make expenditures or incur obligations exceeding the limitation of Government liability set forth in the order. If such expenditures are made, or if such obligations are incurred, those expenditures and obligations will be at the Contractor's sole risk and expense. Further, the limitation of liability shall be the maximum Government liability if the order is terminated. The clause at FAR 52.21624 shall be included in any undefinitized order.

(2) Except for undefinitized orders for Foreign Military Sales; purchases at or below the simplified acquisition threshold; special access programs; and Congressionallymandated long lead procurements; and except as otherwise provided in subparagraph (g)(3) below, the limitation of Government liability shall not exceed fifty percent (50%) of the maximum ceiling amount of an undefinitized order. In the case of orders within these excepted categories, however, the procedures set forth herein shall be followed to the maximum extent practical.

(3) If the Contractor submits a qualifying proposal, as defined in DFARS 217.7401, to definitize an order before the Government obligated fifty percent (50%) of the maximum ceiling amount, the Contracting Officer may increase the limitation of Government liability up to no more than seventyfive percent (75%) of the maximum ceiling amount or up to seventyfive percent (75%) of the amount proposed by the Contractor, whichever is less.

(4) If at any time the Contractor believes that its expenditures under an order will exceed the limitation of Government liability, the Contractor shall so notify the Contracting Officer, in writing, and propose an appropriate increase in the limitation of Government liability of such order. Within thirty (30) days of such notice, the Contracting Officer will either (i) notify the Contractor in writing of such appropriate increase, or (ii) instruct the Contractor how and to what extent the work shall be continued; provided, however, that in no event shall the Contractor be obligated to proceed with work on an undefinitized order beyond the point where its costs incurred plus a reasonable profit or fee exceed the limitation of Government liability, and provided also that in no event shall the Government be obligated to pay the Contractor any amount in excess of the limitation of Government liability specified in any such order prior to definitization.

(h) Initial Spares. The limitations set forth in paragraph (e) and subparagraphs (f)(2), (g)(2) and (g)(3), do not apply to undefinitized orders for the purchase of initial spares.

(i) Ordering Activities. The following activities are authorized to issue orders hereunder:

NSWC IHEODTD

The procuring and administrative contracting officers are responsible for the submission and accuracy of CARs. CARs are not required to be submitted to NAVSEA.

(j) Funds in the following amount are committed under this Basic Ordering Agreement for use by the Ordering Activity in obligating funds to pay for orders placed hereunder:

Item Funds

TBD TBD

G-232-H002 PAYMENT INSTRUCTIONS AND CONTRACT TYPE SUMMARY FOR PAYMENT OFFICE (NAVSEA) (JUN 2018)

(a) The following table of payment office allocation methods applies to the extent indicated.

For Government Use Only

Allocation Method

52.212-4 (Alt I), Contract Terms and Conditions—Commercial Items 52.216-7, Allowable Cost and Payment 52.232-7, Payments under Time-and-Materials and Labor-Hour Contracts

52.232-1, Payments;

52.232-2, Payments under Fixed-Price Research and Development Contracts;

52.232-3, Payments under Personal Services Contracts;

52.232-4, Payments under Transportation Contracts and Transportation-Related Services Contracts; and 52.232-6, Payments under Communication Service Contracts with Common Carriers

52.232-29, Terms for Financing of Purchases of Commercial Items;

52.232-30, Installment Payments for Commercial Items