SOWN00174-19-Q-0011.doc

Statement of Work for

ITT ENIDINE Service of MK 14 MOD 2 Conversion Kit 1.0

GENERAL

The Indian Head, Naval Surface Warfare Center McAlester Detachment has been contracted with supplying parts and services for the ORDALT 16857. ORDALT 16857 converts an unfired MK 14 MOD 1 canister into a MK 14 MOD 2 canister. Preparation of this ORDALT was authorized by Surface Launching Project Manager Memorandum Serial 8394 IWS 3L/Ser 213 dated February 2013 and Configuration Control Board Directive No. 13-TBD assigned to ECP FVLS-441.

In support of this ORDALT, NSWC McAlester is sending previously used Shock Mitigation Devices to ITT ENIDINE (the Manufacture) to test the unit for serviceability.

2.0

SCOPE

The contractor, ITT ENIDINE shall provide Testing to determine if the Shock Mitigation Devices are Serviceable and can be reused upon return to NSWC McAlester. NSWC McAlester will then include the Shock Mitigation Devices within the MK 14 MOD 2 Conversion Kits.

3.0

REQUIREMENTS

3.1 Testing of Units: ITT ENIDINE will receive used Shock Mitigation Devices from NSWC McAlester in increments of 100 each as per ITT ENIDINE requirements.

Testing shall include all equipment necessary to complete the service. All equipment will be supplied by ITT ENIDINE. ITT ENIDINE will provide return shipping for all units, Serviceable or Unserviceable. A detailed written report shall be provided for each Unit testing to indicate usable service condition.

· Unpack Units sent from McAlester.

· Clean, Inspect and Test units for Serviceable Condition.

· A written report shall be provided for each unit tested, that would indicate serviceable condition.

· Shock Mitigation Devices should be repacked and shipped back to NSWC McAlester.

3.2 Shipping: All units shall be return shipped to NSWC McAlester. McAlester will provide shipping cost through the contract.

4.0

TRAVEL

All work (with the exception of phone support) will be done on-site at ITT ENIDINE. There is no travel required for the Service Contract.

5.0 ENTERPRISE WIDE CONTRACTOR MANPOWER REPORTING APPLIATION (ECMRA)

The Contractor shall report Contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for Service of MK 14 MOD 2 Conversion Kit via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

1) W, Lease/Rental of Equipment;

2) X, Lease/Rental of Facilities;

3) Y, Construction of Structures and Facilities;

4) D, Automatic Data Processing and Telecommunications, IT and Telecom-Telecommunications Transmission (D304) and Internet (D322) ONLY;

5) S, Utilities ONLY;

6) V, Freight and Shipping ONLY.

The Contractor is required to completely fill in all required data fields using the following web address www.ecmra.mil Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, at DoD.ECRMA.Support.Desk@mail.mil

6.0 PLACE OF PERFORMANCE

All Testing will be performed by ITT ENIDINE at their Business location, ITT Inc. 7 Centre Drive Orchard Park NY 14127.

Contact POC is: DAVE SNOWBERGER, Business Development Manager - 716 740 9245 Email Address: DAVE.SNOWBERGER@ITT.COM