DBS_-_Form_16_Quality_Assurance_Requirements.doc
DOC document 96 KB Posted
- Attached to
- 50, 400 lbs Di-N-Butyl Sebacate (DBS)
- Solicitation number
- N00174-17-Q-0003
About this file
FORM 16 QUALITY ASSURANCE REQUIREMENTS
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW_-_DBS.doc | DOC document | |
| RFQ_-_Di-N-Butyl_Sebacate_(DBS).docx | DOCX document | |
| MILITARY_SPECIFICATION.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PROCUREMENT DIVISION FORM 16
Revised 8/28/08 Page 1 of 2
QUALITY ASSURANCE REQUIREMENTS
Note: This form as completed by the customer shall be incorporated into the solicitation/contractual award document.
Inspection:
[X] Initial Inspection at Source with Final Inspection and Acceptance at Destination.
Acceptance:Verified by Certificate of Compliance and Certificate of Analysis to ensure the material meets the specification.
days.
Certifications:
Certifications are required for the following:
| One Copy of these certs must accompany the parts upon delivery. The Container holding these documents must be legibly marked as such. |
| One Copy of these certs must be forwarded to: |
Lawrence Callis, lawrence.e.callis@navy.mil, 3017444912(fax)
| Chemicals: Di-N-Butyl Sebacate (DBS) |
| Certificate of |
Analysis
Certificate of
Compliance
Material:
X
X
Hardness Test:
Hydro Test:
Heat Treat:
Welding:
Magnetic Particle Inspection:
Ultrasonic Inspection:
Radiographic Inspection:
Dye Penetrant Inspection:
Plating:
Surface Finish:
Other
Attachment (F) Procurement Division Form 16
Revised 8/28/08 Page 2 of 2
Note: Customer is to select the Special Clause(s) below as applicable. The selected clause(s) shall be incorporated into the solicitation/contractual award document.
Special Clauses:
[ ] IHD 45 – SAMPLING OF RECEIVED MATERIAL – ORDNANCE MATERIAL AND ORDNANCE COMPONENTS (NAVSEA/IHD) FEB 2000
| a. |
| When the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, receipt inspects Ordnance material or Ordnance components under this contract for Naval rockets or missiles, the following sampling procedures will be used: |
MIL-STD-1916
Level V for Critical Dimensions
Level II N<200 Level III N>200 for majors
Level I N<100 Level II N>100 for minors
| b. |
| In all cases, the acceptance number will be zero (0), the entire lot will be rejected for any defect. |
| c. |
| Notwithstanding the above, the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, may at its discretion, accept a defect on a waiver on a case-by-case basis. |
[ ] IHD 46 – SAMPLING OF RECEIVED MATERIAL – MANRATED MATERIAL (NAVSEA/IHD) FEB 2000
| a. |
| When the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, receipt inspects man-rated material under this contract for rockets, catapults, cartridge actuated devices and their components, the following sampling procedures will be used: |
MIL-STD-1916
Level VI for Critical Dimensions
Level II N<200 Level III N >200 for majors
Level I N<100 Level II N>100 for minors
| b. |
| In all cases, the acceptance number will be zero (0), the entire lot will be rejected for any defect. |
| c. |
| Notwithstanding the above, the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, may at its discretion, accept a defect on a waiver on a case-by-case basis |
Attachment (F) "Source Selection Information-See FAR 2.101 and 3.104."
File details come from the government source that posted it. Updated .