N0017326Q1902_Attachment1_Drawing_Concrete Building (002).pdf
PDF 538 KB Posted
- Solicitation number
- N00173
About this file
This document is a technical drawing specification for a precast concrete building (Building F15) to be delivered to Trumbo Point Annex in Key West, Florida. The building measures 288 inches in length, 140 inches in width, and 120 inches in height, with 6.5-inch wall thickness and a 127-inch interior finish dimension. The structure includes two double-man doors, four rotating lift eyes for transport, overhead lighting, an air handling unit, a heat pump system, four gang outlets distributed across ten locations, an interior 200-amp electrical panel, and an exterior disconnect rated for approximately 200 amps.
The specification notes that the provided drawings serve as a starting point for the vendor to develop a complete written quote and finalize the engineering design. All work must be completed prior to shipping the building to the Key West site. The design is based on nominal State of Florida codes and design loads extracted from a previously delivered building. The document includes detailed design loads for various structural and environmental conditions, including roof live load (20 PSF), floor live load (50 PSF), wind speeds (139 MPH), and snow exposure factors. Compliance with ASME Y14.5-2009 GD&T standards is required, with specified tolerances for dimensional accuracy.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - N0017326Q1902.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
120.00
288.00 BLDG LTH
72.00
2X DOUBLE MAN DOORS
127.0 INTERIOR FINISH
140.0 BLDG WIDTH
6.5 WALL THICKNESS
EXTERIOR DISCONNECT (~200AMP)
OVERHEAD LIGHTING
4X ROTATING LIFT EYES
AIR HANDLING UNIT
HEAT PUMP4 GANG OUTLETS X 10
INTERIOR 200 AMP
ELECTRICAL PANEL
NOTES:
DRAWINGS SUPPLIED HERE ARE A STARTING POINT FOR VENDOR •
TO PROVIDE WRITTEN QUOTE AND COMPLETE THE ENGINEERING
FOR THIS PRECAST CONCRETE BUILDING
ALL WORK TO BE DONE PRIOR TO SHIPPING THE BUILDING TO OUR •
SITE IN KEY WEST, FL
NOMINAL STATE OF FLORIDA CODES, DESIGN LOADS, AND NOTES •
ARE EXTRACTED FROM A PREVIOUS BUILDING WE HAVE HAD
DELIVERED ON-SITE (SEE PAGE 2)
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:100
SHEET 1 OF 2
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
NOMINAL CONCRETE
BUILDING LAYOUT
Concrete Building
Work in Process
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
SIZE
B
DWG. NO. REV
SCALE: 1:100 SHEET 2 OF 2
6714-0010 -
Work in Process
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View4 |
Sheet2
File details come from the government source that posted it. Updated .