N00173-16-R-HD01_DRAFT_RFP.pdf

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXTENSION

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS(%)

DATEAMENDMENT NO.AMENDMENT NO. DATE

15A. NAME AND

ADDRESS

OF OFFER-

OR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXTENSION

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION:

10 U.S.C. 2304 (c) ( )41 U.S.C. 3304(a)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV. 6/2014)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

SEALED BID (IFB)

NEGOTIATED (RFP)

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

DO-C9 1 100

68-0012-15 N00173

US Naval Research Laboratory 4555 Overlook Ave, SW, Washington, DC 20375-5326

N00173-16-R-HD01

[See Section L] Building 222, Room 115

Heather Dinsmore heather.dinsmore@nrl.navy.mil

2-6 7-16 20-34 35-43 93-100

73-92

44-52

54-72

DRAFTDRAFTD AFTDRAFTDRAFTDRAFTcitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.citation includes the provisions at 52.214-16, Minimum Bid Acceptance P OFFEROFFER (Must be fully completed by offeror)(Must be fully completed by offeror) dersigned agrees, if this offer is accepted withindersigned agrees, if this offer is accepted w calendar days calenda (60 calendar dacale e date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the e date for receipt of offers specified above, to furnish any or all items upon which prices are offered oint(s), within the time specified in the schedule.oint(s), within the time specified in the schedule.

AYMENTAYMENT 10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%)ALENDAR DAYS (%) 20 CALENDAR DAYS (% 30 CALENDAR DAYS (%)YS (AF

PART I – THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Solicitation No. N00173-16-R-HD01 Page 2 of 100

B–1 The research, development, and technical services to the Naval Research Laboratory’s (NRL) Electronics Science and Technology Division (NRL-ESTD) program is being procured as a partial small business set-aside. This contract covers two separate lots. Lot I is a small business set-aside procurement. Lot II is a full and open procurement. The maximum dollar amount the Government may order under this contract is $48,000,000.00; the minimum amount is $2,500.00.

B–2 SUPPLIES/SERVICES AND COSTS

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE

1001 – 1999

JOB $

Noun: Research, Development, and Technical Services for the NRL-ESTD PSC: AJ1X or AJ4X (to be defined in task order) Contract Type: Firm-Fixed-Price (FFP) Ordering Period Date of Award through 5 Years FOB: Destination Descriptive Data:

The Contractor shall furnish all labor, material, travel, and items reasonably required to accomplish DO/TOs issued pursuant to the requirements contained in the Statement of Work (SOW) entitled “Research, Development, and Technical Services for the NRL-ESTD Program,” and IAW Section G clause “G-8, Ordering Procedures.”

TOTAL PRICE $TBD

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE

2001 – 2999

JOB $

Contract Type: Firm-Fixed-Price, Level-of-Effort (FFPLOE) Ordering Period Date of Award through 5 Years FOB: Destination Descriptive Data:

The Contractor shall furnish all labor, material, travel, and items reasonably required to accomplish DO/TOs issued pursuant to the requirements contained in the Statement of Work (SOW) entitled “Research, Development, and Technical Services for the NRL-ESTD Program,” and IAW Section G clause “G-8, Ordering Procedures.”

TOTAL PRICE $ TBD

iptive Data: iptive Data ontractor shall furnish all labor, material, travel, and items reasonaontractor shall furnish all labor, material, travel, and items reasonably requblyaa Os issued pursuant to the requirements contOs issued pursuant to the requirements contained in the Statement of Workained in the Statement of arch, Development, and Technical Services arch, Development, and Technical Services for the NRL-ESTD Program,”for the NRL-ESTD Progr “G-8, Ordering Procedures.” “G-8, Ordering Procedures.”

SUPPLIES OR SERVICES AND PRICES/COSTS

Solicitation No. N00173-16-R-HD01 Page 3 of 100

ITEM NO SUPPLIES/SERVICES ESTIMATED COST FIXED FEE

3001 – 3999

Contract Type: Cost Plus Fixed Fee (Term OR Completion Type) Ordering Period Date of Award through 5 Years FOB: Destination Descriptive Data:

The Contractor shall furnish all labor reasonably required to accomplish DO/TOs issued pursuant to the requirements contained in the Statement of Work (SOW) entitled “Research, Development, and Technical Services for the NRL-ESTD Program,” and IAW Section G clause “G-8, Ordering Procedures.”

ESTIMATED COST PLUS FIXED FEE $ TBD

ITEM NO SUPPLIES/SERVICES ESTIMATED COST FIXED FEE

$ N/A

Noun: Materials in support of Research, Development, and Technical Services for the NRL-ESTD

PSC: AJ1X or AJ4X (to be defined in task order) Contract Type: Cost Only Ordering Period Date of Award through 5 Years FOB: Destination Descriptive Data:

The Contractor shall furnish all materials reasonably required to accomplish DO/TOs issued pursuant to the requirements contained in the Statement of Work (SOW) entitled “Research, Development, and Technical Services for the NRL-ESTD Program,” and IAW Section G clause “G-8, Ordering Procedures.”

ESTIMATED COST $ TBD

DRAFTIES/SERVICES IES/SERVICES ESTIMATED COST FIXESTIMATED COST FIX

$$ N/A $$

AFTT

SUPPLIES OR SERVICES AND PRICES/COSTS

Solicitation No. N00173-16-R-HD01 Page 4 of 100

ITEM NO SUPPLIES/SERVICES ESTIMATED COST FIXED FEE

$ N/A

Noun: Travel in support of Research, Development, and Technical Services for the

NRL-ESTD

PSC: AJ1X or AJ4X (to be defined in task order) Contract Type: Cost Only Ordering Period Date of Award through 5 Years FOB: Destination Descriptive Data:

The Contractor shall furnish all travel reasonably required to accomplish DO/TOs issued pursuant to the requirements contained in the Statement of Work (SOW) entitled “Research, Development, and Technical Services for the NRL-ESTD Program,” and IAW Section G clause “G-8, Ordering Procedures.”

ESTIMATED COST $ TBD

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE

NSP*

Noun: Data and Reports

DD1423 is Exhibit Destination FOB: Destination Descriptive Data:

The Contractor shall furnish all data as required by the Contract Data Requirements List (CDRL), DD Form 1423, which is hereby incorporated as Exhibit A. Applicable data will be indicated on each DO/TO issued hereunder.

TOTAL PRICE NSP

*NSP – Not Separately Priced

DRAFT DRAFTIES/SERVICES QUANTITY UNIT IES/SERVICES QUANTITY UNDRAFT

AFTT

SUPPLIES OR SERVICES AND PRICES/COSTS

Solicitation No. N00173-16-R-HD01 Page 5 of 100

B–3 DESCRIPTION OF LOT I AND LOT II

(a) LOT I – The set-aside portion consists of materialized requirements which market research indicated that two or more offers from responsible small business concerns would be received and those offers would be competitive in terms of market prices, quality, and delivery.

(b) LOT II – The Non-set-aside portion consists of materialized requirements which market research indicated that two or more offers from responsible small business concerns would not be received or those offers would not be competitive in terms of market prices, quality, and delivery.

(c) Assignment of materialized requirements to Research Fields under LOT I or II is at the discretion of the DO/TO Contracting Officer. The assignment will be based on the Contracting Officer’s determination whether there is a reasonable expectation that offers from two or more responsible small business concerns would be received and those offers would be competitive in terms of market prices, quality, and delivery. In cases where a requirement spans across multiple Research Fields (e.g. a requirement that includes Radiation Effects (Research Field 2) and Vacuum Electronics (Research Field 5)) the determination will be limited to only those contract holders awarded the right to compete in either of the Research Fields included in the requirement. In the example given, the determination would only include Contractors awarded the right to compete in either Research Fields 2 or 5.

(d) The following list identifies the respective Research Fields for which each Contractor is qualified to compete at the DO/TO level as requirements materialize:

Research Field LOT I – Restricted to

Small Business Concerns LOT II – Unrestricted

1 Optoelectronics 2 Radiation Effects 3 Physics of Electronic Materials 4 High Power Electronics 5 Vacuum Electronics 6 Microwave and Millimeter-wave Circuits 7 Microwave and Millimeter-wave Materials and Devices

[Note: The Contractor shall indicate in the tables above by placing an “X” in the Research Field(s) in which they wish to be considered for award as DO/TO requirements materialize. This table will be replaced with the successful Offerors’ information upon award of the basic IDIQs.]

B–4 TRAVEL COSTS

(a) Except as otherwise provided herein, the Contractor shall be reimbursed for its reasonable actual travel costs in accordance with FAR 31.205-46 and the Joint Travel Regulations (JTR). The costs to be reimbursed shall be those costs accepted by the cognizant DCAA office.

(b) Reimbursable travel costs include only that travel performed from the Contractor's facility to the worksite, in and around the worksite, and from the worksite to the Contractor's facility.

DRAFTentifies the respective Research Fields for which each Contractor is qualifientifies the respective Research Fields for which each Contractor is qualifi ments materialize: ments materialize: DRADRAsearch Field AFTAFTLOT I – Restricted tAFTl Business TTLODRAFTA TDRAFTA T

SUPPLIES OR SERVICES AND PRICES/COSTS

Solicitation No. N00173-16-R-HD01 Page 6 of 100

(c) Relocation costs and travel costs incidental to relocation are allowable to the extent provided for in FAR 31.204-35;

however, Contracting Officer approval shall be required prior to incurring relocation expenses and travel costs incidental to relocation.

(d) The Contractor shall not be reimbursed for the following daily local travel costs:

(i) Travel at U.S. military installations where Government transportation is available;

(ii) Travel performed for personal convenience/errands, including commuting to and from work; and

(iii) Travel costs incurred in the replacement of personnel when such replacement is accomplished for the Contractor's or employee's convenience.

B–5 MATERIALS PURCHASES

(a) Material purchases must be itemized and reported monthly to the COR. Any purchase order greater than $3,000.00 requires advanced approval by the DO/TO Contracting Officer’s Representative (COR). Any purchase order greater than $25,000 must be approved by the DO/TO Procuring Contracting Officer (PCO) prior to purchase.

B–6 EXPEDITING TASK ORDER CLOSEOUT

(a) As part of the negotiated fixed price or total estimated amount of this contract, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $500 or less at the time of final contract closeout. The term "residual dollar amount" shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party might be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

DRAFTated fixed price or total estimatedated fixed price or total estima amount of this contract, both the Governount of this contract, both the Governd o waive any entitlement that otherwo waive any entitlement that otherwise might accrue to either party in any ise might accrue to either party in e of final contract closeout. The term "residual dollar amount" shall include of final contract closeout. The term "residual dollar amount" shall i her party at the end of the conther party at the end of the con ract, except that, amounts connected in any ct, except that, amounts connected in or antitrust violor antitrust vi ations shall be excluded. For purposes ions shall be excluded. For purpos of determining residng

SECTION C

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 7 of 100

C–1 STATEMENT OF WORK

(a) INTRODUCTION

(1) This contract is intended to provide research, development, and technical services to the Naval Research Laboratory’s (NRL) Electronics Science and Technology Division (NRL-ESTD), located in Washington, D.C.

(2) This Statement of Work (SOW) describes the research, development, and technical services to be provided to the NRL-ESTD. The Government will provide detailed requirements, in the form of a SOW or Performance Work Statement (PWS), for each Delivery Oder/Task Order (DO/TO).

(b) BACKGROUND

(1) NRL-ESTD is the Naval Research Laboratory's (NRL's) principal organization in the areas of electronic materials, devices, components, and sub-systems. Basic and applied research in these areas is focused on both the fundamental science as well as the development of technologies that can positively impact the warfighter through improved electronic systems that are used in systems including radar, communications, power conversion/control and electromagnetic warfare.

(2) Forming the basis for many of the devices and components is the development of new electronic materials.

NRL-ESTD has extensive capabilities in the materials deposition, growth, processing, and characterization.

Materials researchers collaborate with device scientists and engineers to design, model, and realize unique electronic materials properties.

(3) Advanced electronic devices, components and circuits are realized through a combination of basic device physics understanding, innovative processing and fabrication, new device and component architectures, and novel electronic materials. The result is the realization of advanced state-of-the-art performance for future Navy and DoD electronic systems.

(4) Fundamental theoretical modeling, sophisticated numerical modeling, as well as advanced simulation techniques are applied as appropriate at the material, device, component, and subsystem level to both guide and support experimental efforts.

(5) Leveraging the advanced materials and device concepts developed within NRL-ESTD, advanced component and subsystem demonstrations are performed to validate system improvements and initiate transition opportunities through Navy and DoD system commands as well as through industry collaborators.

(c) SCOPE

(1) The scope of this contract covers a broad range of services and solutions needed to support NRL-ESTD.

(2) Functional work may be applied to any of the research fields in which NRL-ESTD is engaged. NRL-ESTD develops new electronic materials, devices, components, and subsystems for next generation systems in support of customers throughout NRL, the Department of Defense and other US Government organizations. The vast majority of work will take place on site at NRL, Washington, DC, as success will often require ongoing technical collaboration with NRL scientists and engineers, and access to specialized research equipment and

DRAFT

ensive capabilities in the materials deensive capabilities in the materials deposition, growth, processing, and chaposition, growth, processing, and cha rs collaborate with device scientistss collaborate with device scien and engineers to design, model, and reand engineers to design, model, a properties. properties.

onic devices, components and circuits are realized through a combination onic devices, components and circuits are realized through a combina ng, innovative processing and fabricang, innovative processing and fabr tion, new device and component archnew device and componen

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 8 of 100 facilities. However, some aspects of some projects will require performance at other Government and non- Government sites in both the continental United States (CONUS) and outside the continental United States (OCONUS). For instance, NRL-ESTD prototype devices and systems will need to be tested and demonstrated in real-world settings. Such testing could involve, for example, testing new photovoltaic systems at various test ranges around the country in order to establish realistic performance and reliability data for the use of photovoltaics in military systems. Research to be conducted under this contract are categorized into 7 broad research fields as follows, and are further defined in Paragraph C-2 below:

Research Field 1 Optoelectronics Research Field 2 Radiation Effects Research Field 3 Physics of Electronic Materials Research Field 4 High Power Electronics Research Field 5 Vacuum Electronics Research Field 6 Microwave and Millimeter-wave Circuits Research Field 7 Microwave and Millimeter-wave Materials and Devices

(3) The Contractor will, in response to DO/TO issued under this contract by NRL, provide services that potentially span the entire spectrum of research, development, and technical services to NRL-ESTD. Services to be provided under this contract are categorized into 8 Functional Areas as follows, and are further defined in Paragraph C-2 below:

Functional Area 1 Basic, Applied & Advance Technology Development Functional Area 2 Modeling, Simulation & Emulation Functional Area 3 Science & Engineering Functional Area 4 Operations Functional Area 5 Experimentation, Test, and Evaluation Functional Area 6 Analysis and Evaluation Functional Area 7 Technical Support Functional Area 8 Project Management

C–2 TECHNICAL OBJECTIVES

(a) The following section specifies the objectives of the contract. The objectives below are organized into two categories – Research Fields and Functional Areas. Each task issued under this contract will involve performing one or more of these functions in one or more of the fields (or adjacent, emerging fields).

(b) RESEARCH FIELDS:

(1) Optoelectronics:

(i) The Optoelectronics Research Field executes a broad research and development portfolio ranging from basic to applied research on optoelectronic materials and devices for space and terrestrial applications where operation under situations of high environmental stress is required. Activities include creating semiconductor materials that display characteristics such as wavelength sensitivity, electrical conversion efficiency, and

DRAFTw:w:

onal Area 1 onal Area 1 Basic, Applied & Advance Technology DevelopmentBasic, Applied & Advance Technology Developme onal Area 2 onal Area 2 Modeling, Simulation & EmulationModeling, Simulation & Emulati onal Area 3 onal Area 3 Science & EngineeringScience & Enginee l A 4l A O tiO

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 9 of 100 switching speed superior to current state of the art, and development of low dimensional structures and materials that allow control of the electronic and optoelectronic properties at the quantum mechanical level.

(ii) In order to retain battlefield spectrum dominance in potential future engagements via new sensing and imaging techniques it is necessary to invent new materials with superior optical and optoelectronic response at infrared (IR) wavelengths. This research and development focuses heavily on semiconductor band structure modeling that produces novel material designs, semiconductor growth, characterization, and fabrication to realize the materials and create devices from them.

(iii) Future operational concepts rely heavily on unmanned and man-portable systems. The energy needed to power these systems will require advances in photovoltaic (PV) technologies with the goal to invent new PV that have features including; high efficiency, low cost, survivability under extreme conditions, flexible substrates, and fabrication in the field.

(2) Radiation Effects:

(i) The Radiation Effects Research Field focuses on developing military electronics with the ability and certainty of surviving and operating in harsher environments than is required in commercial electronics. In particular, research is performed to understand the interaction of radiation with electronic and optoelectronic materials and devices with the goal of mitigating or eliminating the effect of the radiation on device and system performance.

(ii) The research is in all areas of radiation effects including total ionization dose (TID), single event effects (SEE), displacement damage effects, high power microwave and millimeter-wave effects, electromagnetic pulse effects, full capability in theory, modeling and simulation, and experimentation.

(iii) The research focus is on both space and manmade radiation environments. The research devises new methods, materials, devices, and mitigation strategies to enable electronic and optoelectronic devices that bring state of the art capability to these harsh radiation environments.

(3) Physics of Electronic Materials:

(i) The Physics of Electronic Materials Research Area focuses much of its effort in the nanoscopic regime where dimensional constraints affect device behavior in unexpected ways, because the device size is smaller than the characteristic length-scale of the fundamental excitations that control the electronic, optical and thermal properties of materials and which can exhibit fundamentally different properties than their microscopic counterparts. This Research Field focuses on investigating the physics of these nanoscale phenomena, developing new nanoscale electronic materials and exploring innovative device concepts that operate using nontraditional device physics.

(ii) Basic and applied research is performed in the areas of novel electronic materials and applications including the growth of oxides, metals, and semiconductors via atomic layer deposition and epitaxy (ALD and ALE) and molecular beam epitaxy (MBE) to exploit phenomena such as plasmonics and surface-enhanced Raman scattering (SERS) for applications such as chemical sensing, radiation-tolerant electronics, and ultra-low-power analog and digital electronics.

DRAFT

gg g g gg g g in all areas of radiation effects inin all areas of radiation effect cluding total ionization dose (TID), singlluding total ionization dose (TID), t damage effects, high power micrt damage effects, high power microwave and millimeter-wave effects, elecowave and millimeter-wave effects ty in theory, modeling and simulation, and experimentation.ty in theory, modeling and simulation, and experim

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 10 of 100

(iii) Low-dimensional materials and DNA constructs offer intriguing possibilities to realize new electronic materials and devices with applications such as chem./bio sensors, high-linearity electronics, and nanomechanical resonators. Understanding materials growth and characterization are important to realizing low-dimensional materials applications.

(iv) At the nano-scale a fundamental understanding of quantum effects is crucial to the realization of high performance electronics. Work includes studies of surfaces and interfaces, investigations of semiconductor heterostructures and nanostructures, defect studies, implementations of quantum information and modeling of advanced device structures.

(v) At the nanometer length scale the ability to produce functional electronic materials that are on the same size scale as functional biologicals such as DNA, proteins, etc. exists. Electronic/biological hybrids have the potential to produce complex new functionality unobtainable in either electronic or biological systems alone.

Work in this area ranges from basic studies of electronic/biological interactions to applied development of bioelectronic and biomimetic devices and systems.

(4) High Power Electronics:

(i) The High Power Electronics Research Field is directed at conducting research and development programs in solid state electronics and related technologies that support Navy and DOD interests and capabilities in the full range of new weapons capabilities enabled by high-power solid-state electronic devices.

(ii) The focus of this Research Field is to develop power electronic materials, devices, and conversion circuits for insertion of power electronics into Navy engineering development efforts. The materials and devices developed must be capable of handling very high power, must be highly efficient, and must be compatible with excellent thermal management.

(iii) Current research efforts directed at achieving these goals include: the fabrication, characterization, reliability physics, surface science, and theory of wide bandgap semiconductor power switching devices; the development of optimized growth approaches; the characterization of defects for bulk and epitaxial wide bandgap semiconductor materials; the development of heterojunction-active wide bandgap power devices; the integration of diamond for improved thermal conductivity; the growth and fabrication of related electronic materials including oxides, graphene, magnetic materials, and metamaterials; the application of novel epitaxial techniques developed for wide bandgap semiconductor materials to monolithic integration with other device technologies; and development of power novel high performance, high efficiency power conversion circuits.

(5) Vacuum Electronics:

(i) The Vacuum Electronics Research Field is directed at next generation high-power, high-frequency vacuum electronics by developing the theory, numerical modeling and design tools, and experimental realization of electron beam-electromagnetic wave interaction structures, materials, and fabrication techniques used in microwave and millimeter-wave systems.

(ii) An overall objective is to understand, characterize, and develop high-performance electromagnetically active materials, electrodynamic structures, and electron beam formation and transport systems, as well as to create and nics and related technologies that support Navy and DOD interests and canics and related technologies that support Navy and DOD interests and cap eapons capabilities enabled byeapons capabilities enabled by high-power solid-state electronic devices.power solid-state electronic devices.

s Research Field is to develop power electronic materials, devices, and cons Research Field is to develop power electronic materials, devices, an er electronics into Navy engineerer electronics into Navy engineering development efforts. The materials aing development efforts. The mater capable of handling very high power, must be highly efficient, and must becapable of handling very high power, must be highly efficient, and m

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 11 of 100 implement unique meso- to micro-fabrication techniques for advanced active vacuum electronic devices and passive microwave/millimeter-wave components.

(iii) Basic and applied research on novel electron emission/collection, electron gun, power supplies, thermal management, passive components, electromagnetic materials, metamaterials and fabrication techniques for electromagnetic structures, including the development and demonstration of complete vacuum electronic amplifiers is performed.

(iv) Basic and applied research in numerical techniques is used to develop 1-/2-/3-dimensional physics-based models and simulation tools for the design and analysis of vacuum electronics amplifiers/oscillators; supporting passive components such as filters and combiners; and control components such as phase shifters. Theoretical modeling and advanced algorithm development are combined to produce computationally efficient codes that take advantage of hardware advances such as multi-core processors and graphics processing units.

(6) Microwave and Millimeter-wave Circuits:

(i) The Microwave and Millimeter-wave Circuits Research Field is focused the research and development of novel passive and active concepts for analog high-frequency and mixed-signal solid-state components and circuits. These include innovative approaches to the design of frequency-selective circuits, such as fixed-tuned and variable-frequency filters, and novel techniques for realizing high-frequency control components, such as switches, circulators, and phase shifters.

(ii) As Navy and DoD electronic systems in radar, communications, and electromagnetic warfare need to maintain spectrum dominance on the battlefield, this Research Field is broad ranging in exploring all material, device and circuit concepts that will enable adaptive exploitation of the electromagnetic spectrum by increasing tenability and/or dynamic range.

(iii) Tasks associated with circuit and device development are comprehensive in nature, comprised of concept derivation, linear and nonlinear modeling, design, fabrication, and testing. Realization and demonstration can range from proof-of-principle using soft-substrate circuits to state-of-the-art microwave and millimeter-wave monolithic integrated circuits produced through trusted foundries.

(7) Microwave and Millimeter-wave Materials and Devices:

(i) The Microwave and Millimeter-wave Materials and Devices Research Field is devoted to formulating, guiding, and executing the NRL-ESTD’s efforts in solid-state electronic device technology for mixed-signal, microwave, and millimeter wave applications.

(ii) For solid-state power applications the research emphasis is on wide band-gap semiconductors. R&D efforts include materials growth, device design, device fabrication, test and evaluation of test structures, devices, passive components and small-scale circuits to push the state-of-the-art in RF devices.

(iii) Materials and device research on narrow band-gap semiconductors and low-dimensional conductors is focused on addressing the needs for autonomous and man-portable systems. This is realized by focused design, fabrication, test and evaluation of materials, test structures, devices, passive components, and small-scale

DRAFT

y , qy , g g q y pg g q y p s, and phase shifters. , and phase shifters.

oD electronic systems in radar, commoD electronic systems in radar, communications, and electromagnetic warfcations, and electromagneticm dominance on the battlefield, this Resedominance on the battlefield, this Research Field is broad ranging in explorarch Field is broad ranging in e oncepts that will enable adaptive oncepts that will enable adaptive exploitation of the electromagnetic spectrexploitation of the electromagnetic

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 12 of 100 circuits to push the state-of-the-art in small-signal RF and high-speed analog signal processing devices.

(iv) Navy and DOD systems require a much higher level of reliability in a more stressful environment than commercial applications of similar technologies. Thus, a critical issue is the reliability of microwave and millimeter-wave devices and circuits which is analyzed through accelerated life tests and failure physics characterization and assessment.

(c) FUNCTIONAL AREAS:

(1) Functional Area 1: Basic, Applied & Advanced Technology Development

(i) In this functional area, the Contractor will conduct research and development efforts in R&D categories 1 through 3 (Basic Research through Advanced Technology Development). Scientific study and experimentation will be directed toward advancing the state-of-the-art or increasing knowledge or understanding. In addition to directly advancing NRL’s research, there is also need to evaluate concepts, technologies, and programs developed by others for applicability to NRL research. Goals of the research and development include optimizing the properties and performance of electronic materials, devices, components, and subsystems. This may require growth of materials, analysis of materials or devices by conventional means, and analysis methods and instruments developed specifically for the material (or device) system studied. Materials systems may require unique or conventional growth techniques. Basic chemistry maybe required to develop pre-cursor materials, novel device or material structures. In many projects, technical and scientific writing skills are needed to report project descriptions, status, and results in publication submissions.

(2) Functional Area 2: Modeling, Simulation & Emulation

(i) In this functional area, the Contractor will create and validate representations of phenomena, processes, and systems. This may involve the use of theoretical and numerical modeling and simulations to determine the performance of materials, devices, components, subsystems, and systems. It is desirable to develop models and simulations that are transferable to NRL research.

(3) Functional Area 3: Science & Engineering

(i) In this functional area, the Contractor will develop concepts for various electronic materials, devices, components, and subsystems. The Contractor will work with NRL to develop and assess requirements for electronic materials, devices, components, and subsystems as dictated by the Government. Algorithms and methodologies will be designed, implemented, and tested in hardware and software. Software code will be programmed in a language agreed to by NRL for a variety of hardware platforms. The Contractor will conduct engineering in a variety of disciplines based on the tasking, to include electronic materials process development and characterization, and device and circuit fabrication, testing, and modeling. Engineers will develop and integrate components subsystems and systems to meet the mission objective. Documentation of processes, procedures and designs as well as status and financial reports will be required.

DRAFT

nventional growth techniques. Bnventional growth technique asic chemistry maybe required to developchemistry maybe required to develop ice or material structures. In many price or material structures. In many projects, technical and scientific writinojects, technical and scientific w criptions, status, acriptions, status, and results in publication submissions.nd results in publication submissions.

a 2: Modeling, Simulation & Emulation a 2: Modeling, Simulation & Emu

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 13 of 100

(4) Functional Area 4: Operations

(i) In this functional area, the Contractor will install, configure, operate, and maintain a variety of highly sophisticated and unique electronic materials fabrication, processing and characterization systems. These systems are frequently reconfigured to accommodate newly developed fabrication, processing and characterization tools. Procedures must be developed and maintained for systems such as shutdown, transport, setup, startup, integration, test, calibration, troubleshooting, and operation. Contractors will install, maintain, test, troubleshoot, configure, update, fix, replace, administer, and optimize these systems. As NRL-ESTD prepares for a future move to a new facility, there will be need to validate that designs will support future operations, and also to facilitate a safe and efficient transition which minimizes impact to research.

(5) Functional Area 5: Experimentation, Test, and Evaluation

(i) In this functional area, the Contractor will conduct experimentation, test and evaluation of materials, devices, components, systems, and architectures in the laboratory, the field and/or in an operational environment.

Support may include participation and/or guidance in the development of a test or exercise plan, execution of the testing and/or demonstration, measurement and analysis of performance, validation and verification of benchmarks, design/execution/analysis of experiments, and operation/maintenance of the components, systems or architectures under test. Tasks may typically include the design, fabrication, calibration, operation, and maintenance of instrumentation, ranges, and facilities as required by a given test plan. Deliverables may also include data; both unprocessed and processed, related signatures, and related metadata.

(6) Functional Area 6: Analysis and Evaluation

(i) In this functional area, the Contractor will provide Subject Matter Expertise (SME) to identify technology gaps and propose how they may be filled. SME support may require the development of new analysis, modeling, and visualization tools which will allow information to be better processed. Custom databases may need to be developed or modified to support analysis of raw data, statistics, project data, and simulation outputs. The Contractor will conduct and evaluate user evaluation studies of software and systems to provide greater insight to NRL. Also in this area is the execution of analysis of data, whether derived by NRL or by the Contractor, to determine the insights and assess the results of the particular test or experience that generated that data set.

(7) Functional Area 7: Technical Support

(i) In this functional area, the Contractor will design and fabricate models, mock-ups, and prototypes of developmental units to include custom mechanical and electronic components. There will be requirements for the identification of data sources and collection of data. Configuration management of hardware, software, and documentation may also be necessary. Once training needs associated with NRL-ESTD projects are identified, training solutions may be developed. Laboratory and field experiments are to be supported through logistics planning, equipment operation, data analysis, and video conferencing. Technical support specialists would integrate, troubleshoot, and repair experimental and technology demonstration ESTD systems. Technical writing, desktop publishing, graphic art, and presentation development support may be needed by projects.

DRAFT

rumentation, ranges, and facilitiesrumentation, ranges, and facil as required by a given test plan. Deliverrequired by a given test plan. Deliver nprocessed and processed, renprocessed and processed, related signatures, and related metadata. lated signatures, and related metadata.

a 6: Analysis and Evaluation a 6: Analysis and Evaluati area, the Contractor will provide area, the Contractor will provide Subject Matter Expertise (SME) to identSubject Matter Expertise (SME) to

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 14 of 100

(8) Functional Area 8: Project Management

(i) In this functional area, the Contractor will provide business, financial, and technical management support to NRL scientists to support project planning, execution, communications, NRL operations, and the development of new opportunities for research and development efforts covered under the NRL-ESTD SOW.

(ii) Contractors will typically prepare and manage project schedules, budgets, and resources. In some cases, shared resources may need to be managed to balance the needs of several branches or projects, and resolutions for project problem areas be proposed. Project managers coordinate project activities with the appropriate DoD and non-DoD activities, such as sponsors and potential end users, CONUS and OCONUS. They also track and document all project or program actions, and communicate them to all participants. Common tasks include:

organization and preparation of presentation material and venues for workshops, symposia, demonstrations, and program reviews to achieve NRL ESTD objectives. The generation of technical risk assessments is performed for programs, technologies, and techniques. Overall objectives may include the transition of products from science and technology initiatives into fieldable systems.

C–3 GENERAL REQUIREMENTS

(a) Unless otherwise stated in the DO/TO, The Contractor shall have its support team in place and fully functioning within 30 days of DO/TO award.

(b) NON-PERSONAL SERVICES

(1) The Government will neither supervise Contractor employees nor control the method by which the Contractor performs the required tasks. The Government will not assign tasks to, or prepare work schedules for, individual Contractor employees.

(2) The Contractor shall be responsible for managing its employees and guarding against any actions that are of the nature of personal services, or give the perception of personal services as defined in FAR-Part 37, Service Contracting.

(3) The Contractor shall notify the Contracting Officer (KO) if any Government requested actions constitute, or are perceived to constitute personal services.

(c) BUSINESS RELATIONS

(1) The Contractor shall integrate and coordinate all activity needed to execute this contract.

(d) CONTRACT MANAGEMENT AND ADMINISTRATION

(1) The following subsections specify requirements for contract management and Contractor personnel administration.

(i) CONTRACT MANAGEMENT

(A) The Contractor shall establish clear organizational lines of authority and responsibility to ensure effective management of the resources assigned to this contract.

DRAFT

0 days of DO/TO award. 0 days of DO/TO award.

AL SERVICESAL SERVICES

t will neither supervise Contractort will neither supervise Contractor employees nor control the method by w employees nor control the methodrr the required tasks. The Government the required tasks. The Governmen will not assign tasks to, or prepare wnot assign tasks to, or prep ll

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 15 of 100

(ii) PERSONNEL ADMINISTRATION

(A) The Contractor shall assign a single point of contact, also known as the Program Manager (PM), who must work closely with the Contracting Officer and Contracting Officer’s Representative (COR), as applicable. The Contractor PM must ultimately be responsible for ensuring that the Contractor’s performance meets all Government contracting requirements within cost and schedule. PM must have the requisite authority for full control over all company resources necessary for contract performance. As appropriate, the role of PM may be a full time management position, or a collateral duty assigned to a technical team member.

(B) The Contractor shall maintain the adequacy of their employees by providing initial and refresher training to meet all personal qualification requirements.

(C) The Contractor shall make all necessary travel arrangements for employees.

(iii) CONTRACT ADMINISTRATION

(A) The Contractor shall respond to Government requests for contractual actions within five (5) work days.

(B) The Contractor shall respond to Government requests for PM conference requests within two (2) working days.

(iv) CONTRACTOR IDENTIFICATION

(A) Pursuant to DFARS 211.106 Contractor employees shall identify themselves as Contractor personnel by introducing themselves or being introduced as Contractor personnel and displaying distinguishing badges or other visible identification for meetings with Government personnel. In addition, Contractor personnel shall appropriately identify themselves as Contractor employees in telephone conversations and in formal and informal written correspondence.

C–4 SPECIAL REQUIREMENTS

(a) This section describes the special requirements for this effort.

(1) CLEARANCE REQUIREMENTS

(i) Contractor personnel who require NRL base access or access to NRL unclassified material and/or unclassified systems shall possess a favorably completed DoD National Agency Check with Law and Credit

(NACLC);

(2) INFORMATION SECURITY

(i) All information systems utilized in the execution of this contract will require (at minimum) authorization and accreditation prior to any connectivity to NRL networks or systems. All non-NRL authorization and accreditation documentation is subject to NRL code 1200 review and approval.

(ii) No penetration testing of DoD networks or systems will occur without the express written approval of the governing authority.

DRAFTOR IDENTIFICATIONOR IDENTIFICATION

ARS 211.106 Contractor employees shaARS 211.106 Contractor employees s ll identify themselves as Contractol identify themselves as Con ves or being introduced as Contractves or being introduced as Contractor personnel and displaying distinguishor personnel and displaying distin cation for meetings with Governmecation for meetings with Governm nt personnel. In addition, Contractor ponnel. In addition, Contrac

DESCRIPTION/SPECIFICATIONS/ WORK STATEMENT

Solicitation No. N00173-16-R-HD01 Page 16 of 100

(3) ENVIRONMENTAL REQUIREMENTS

(i) The Contractor shall comply with all documents listed below as mandatory and referenced under Section F-3, Performance Requirements. Compliance with documents listed as non-mandatory is the Contractors' option.

(A) Mandatory compliance at Navy Facilities

(B) OPNAVINST 5090.1C - Environmental Readiness Program Manual

C–5 DATA DELIVERABLES

(a) Specific technical data will be included in individual DO/TO issued under the contract, either as CDRL’s or specified in the Statement of Work. It is anticipated that all deliverables prepared under this contract may be required to be delivered either as hardcopy or on electronic media or both as specified in the individual DO/TOs.

C–6 DELIVERY/TASK ORDERS

(a) The specific work to be carried out shall be further described in DO/TO orders issued under this contract.

CLAUSES INCORPORATED BY FULL TEXT

C–7 ENTERPRISE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATION (ECMRA)

(a) The Contractor shall report Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract for the Naval Research Laboratory via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) S, Utilities ONLY;

(5) V, Freight and Shipping ONLY.

(b) The Contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

(c) Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

C–8 REQUIREMENTS FOR ON-SITE CONTRACTORS

(a) See Section J, Attachment 2, Requirements for On-Site Contractor Personnel.

DRAFTE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATIOE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATIO shall report Contractor labor hours (ihall report Contractor labor hours (including Subcontractor labor hours) rncluding Subcontractor labor hou ices provided under this contract for ices provided under this contract for the Naval Research Laboratory via a the Naval Research Laboratory racted services excluded from reporacted services excluded from reporting are based on Product Service Code based on Product Service

SECTION D

PACKAGING AND MARKING

Solicitati…