Combined_N0016724Q0295 Amendment.pdf

1301180684

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendment to revise min specs

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 28-Aug-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N0016724Q0295

X 9B. DATED (SEE ITEM 11)

21-Aug-2024

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Aug-2024

CODE

NAVAL SURFACE WARFARE CENTER CARDEROCK

MICHAEL S. BRODIE

757-600-8579 MICHAEL.S.BRODIE7.CIV@US.NAVY.MI

904 CORPORATE LANE

CHESAPEAKE VA 23320

N00167 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016724Q0295

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

MINIMUM SPECIFICATIONS

BRAND NAME OR EQUAL

High Performance GPU Server

CLIN 0001 A) - Server Specifications: Supermicro AS-4125GS-TNRT (OR EQUAL)

1. Processor:

o Dual CPU configuration o AMD EPYC 9754, 2.25GHz 128-Core - Bergamo o 256 Threads, CPU Socket: SP5, L3 Cache: 256MB, 5nm, 360W o Socket Count: 2P/1P OEM

2. RAM:

o Minimum 512GB DDR5-4800MHz 288-pin Low Profile ECC Registered DIMM 2RX8 o Configuration: 16x32GB or EQUAL o 24 DIMM Slots, expandable up to 6TB DDR5 memory

3. Storage:

o (2) Hard Drive 3.84TB SATA 6Gb/s 3D TLC 2.5in 7.0mm, < 2DWPD

4. Graphics Processing Units (GPUs):

o (6) NVIDIA H100 NVL Graphics Processing unit (GPU) OR EQUAL o Thermal Solution: Passive Air Cooled o Flexible GPU support: active & passive GPUs, minimum of 8 direct attached double width, full length GPUs o Total memory of all GPUs must be at least 564GB of HBM3 RAM. Each GPU should have at least 94 GB of vRAM. Memory Bandwidth must be at least 7.8 TB/s. The GPUs must have a data transfer rate from the CPU of at least 128 GB/s. The GPU must be compatible with the CUDA library. The GPUs should be able to communicate at 900 Mbps.

5. Interconnect:

o (9) NVIDIA NVLink Bridge, Ampere, 2-Way 2-Slot x16 OR EQUAL o The GPUs should be able to communicate at 900 Mbps. At least two GPUs at a time must be able to be connected to each other with high bandwidth, if not all GPUs.

6. Security:

o TPM: Security Module SPI capable TPM 2.0

7. Networking:

o Ethernet Adapter Card: Mellanox MCX516A-CCAT 100GbE ES Ethernet Adapter ConnectX-5

EN OR EQUAL

o 100GbE Dual QSFP28, PCIe3x1, Compatible with MMF, MPO-12 (Polarity B) o On-board: 2x 10GbE BaseT

8. Operating System:

o RHEL-9 for testing OR EQUAL o Carderock will provide enterprise RHEL license and perform STIG hardening

9. Motherboard & Chassis:

o Rackmount Server up to 8U o Multiple 2U servers is allowed to achieve GPU RAM requirement, if air-cooled and same or lower cost, o Supported GPU : Up to 8 Double-Width/Single-Width Cards (Full Height Full Length), NVIDIA H100 or AMD MI200 series, o Supports both active and passive cooled GPUs, o Dual-Socket SP5 CPU capability, o 24 DIMM Slots, up to 6TB DDR5 memory, L/RDIMM, o On-board: 2x 10GbE BaseT o Integrated IPMI 2.0 and KVM with Dedicated LAN, o SATA3 (6Gbps), o 24x 2.5in hot-swap NVMe/SATA/SAS drive bays (4x 2.5in NVMe dedicated) o 1 M.2 NVMe OR 1 M.2 SATA3

10. Power Supply:

o Dual Power Supply at necessary wattage to support system with max 8 GPUs

11. Additional Requirements:

o Assembly and testing included o Delivery included o Rack power on-site is 208/120 V, 3-phase, up to 80A per breaker

CLIN 0002 B) - Fiber Optic Transceiver specifications:

1. Quantity: 160 units

2. Form Factor: QSFP28+

3. Data Rate: 100 Gigabit Ethernet (100GbE)

4. Fiber Mode: Multi-mode Fiber (MMF)

5. Connector Type: MPO-12 with Polarity B

6. Wavelength: 850nm

7. Reach:

o OM3: 70 meters o OM4: 100 meters o OM5: 100 meters

8. Compliance Standards:

o IEEE 802.3bm o IEEE 802.3cd o SFF-8665 o SFF-8642

9. Operating Temperature: 0°C to 70°C (Commercial)

10. Maximum Power Consumption: 3.5W

11. Compatibility:

o Cisco 9332C switch o Mellanox MCX516A-CCAT 100GbE ES Ethernet Adapter OR EQUAL

12. Additional Requirements:

o Must be MSA (Multi-Source Agreement) compliant o RoHS compliant o Must include manufacturer's warranty of at least 1 year

C-E) Fiber Cable specifications:

CLIN 0003 C) - 1m MMF Fiber Network Cables In Accordance With (IAW) Listed Minimum Specifications.

CLIN 0004 D) - 2m MMF Fiber Network Cables In Accordance With (IAW) Listed Minimum Specifications.

CLIN 0005 E) - 70m MMF Fiber Network Cables In Accordance With (IAW) Listed Minimum Specifications.

1. Cable Type: Multi-mode Fiber (MMF)

2. Fiber Type: OM4

3. Connector Type: MPO-12 Male UPC (Polarity B) to MPO-12 Male UPC (Polarity B)

4. Fiber Count: 12

5. Cable Length: As stated in CLIN item description

6. Jacket Material: LSZH (Low Smoke Zero Halogen)

7. Jacket Color: Aqua

8. Fiber Core Diameter: 50μm

9. Fiber Cladding Diameter: 125μm

10. Insertion Loss: ≤ 0.35 dB per connector

11. Return Loss: ≥ 25 dB

12. Operating Temperature Range: -20°C to +70°C

13. Compliance Standards: IEEE 802.3bm, TIA-568.3-D, IEC 61754-7, RoHS

14. Additional Requirements:

o Factory terminated and tested o Protective pulling eye on each end o Individually packaged and labeled

All fiber network cables must be compatible with the specified fiber optic transceivers (QSFP28+, 100GbE, MMF, MPO-12 Polarity B) and the Cisco 9332C switch and Mellanox MCX516A-CCAT 100GbE ES Ethernet Adapter.

The cables should be factory terminated, tested, and labeled to ensure optimal performance and easy installation.

The LSZH jacket material ensures fire safety and low smoke emission in case of a fire. The specified compliance standards ensure interoperability and reliability of the fiber network cables.

All items shall be TAA Compliant All components shall be obtained from authorized reseller of OEM

(End of text)

(End of Summary of Changes)