N0016724Q0130 Struers Equipment Solicitation.pdf

N0016724Q0130

This is a combined synopsis/solicitation for commercial items prepared in accordance with

Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation that Naval Surface

Warfare Center Carderock Division (NSWCCD) intends to issue and is a Request for Quotes

(RFQ) for the following Supplies and/or Services.

Requesting servicing for annual preventative maintenance, as-needed repairs, and procurement of a small metallurgical abrasive cutoff saws. This will be the base year and 4 option years. The service and equipment will be used by the Materials Division and laboratories within Buildings 60 of the Naval Surface Warfare Center Carderock Division

(NSWCCD) in West Bethesda, MD.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2024-04 effective 05/01/2024 located on https://www.acquisition.gov/?q=browsefar and the Defense Federal Acquisition Regulation

Supplement (DFARS) DPN 03262024 effective 03/26/2024 located at https://www.acq.osd.mil/dpap/dars/change_notices.html. SEE ATTACHED SOLICITATION

FOR CLAUSES AND PROVISIONS. The NAICS code is 541990 and the associated PSC code is J066, and the Small Business Standard is $19,500,000 for this procurement: NOTE: A Class

Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code

Descriptor currently in effect, match the item(s) being procured. This procurement IS NOT being set-aside for small business.

Interested parties may identify their interest to this requirement by submitting a quote and/or capabilities statement no later than 10:00 AM on May 28, 2024. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ.

All responses shall include price(s), Cage Code, FOB Origin, a point of contact, name and phone number, GSA contract number (if applicable), business size, and payment terms.

Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. There will be no additional CLINs added for shipping. If there is a shipping charge, please include in the price.

Responses to this notice are due on or before 10:00 AM on May 28, 2024, Eastern Daylight

Time (EDT) to christopher.c.rolince.civ@us.navy.mil.

Point of Contact for this notice is Chris Rolince, 757-513-8285, christopher.c.rolince.civ@us.navy.mil https://www.acquisition.gov/?q=browsefar https://www.acq.osd.mil/dpap/dars/change_notices.html mailto:christopher.c.rolince.civ@us.navy.mil

BPA TERMS AND CONDITIONS

1. The service provider for the Blanket Purchase Agreement (BPA) shall provide service for Struars annual preventative maintenance, as-needed repairs, and procurement of a small metallurgical abrasive cutoff sawas descriptions as described in the Minimum Specifications provided in the solicitation and stated on CLIN 0001-0003.

2. Extent of obligation The Government is obligated only when purchases are requested by an authorized contracting officer for the duration of the BPA.

3. Pricing (quote) will be requested for the unpriced CLIN (0001-0003) at the time it is required by the government

IAW Minimum Specifications. BPA Call quotes/estimates should be received within 10 calendar days from the date requested. Purchases under the awarded BPAs will be made under the authority of Title 10 U.S.C. 2304(a), and in accordance with FAR 13.303-5 and DFARS 213.303-5.

4. Purchase limitation. The total of all BPA Calls may not exceed the total ceiling price for all CLINS for $249,999 and $45,000 per BPA Call.

5. Individuals authorized to purchase under the BPA. The Contracting Officers of Naval Surface Warfare Center-

Carderock Division (NSWCCD) Code 02 Contracting Department are the only authorized individuals to order against this BPA.

6. Place of Performance The anticipated place of performance is West Bethesda, MD.

7. Period of Performance; the period of performance is five (5) years from the date of this agreement, or until the total of all Calls (Ceiling) is reached, whichever occurs first. The Government is obligated only to the extent of authorized purchases/calls actually made under the BPA. we will add the actual at award

8. Price Reasonableness; Price reasonableness shall be determined at the BPA Call level. For evaluation purposes provide a price for the following item.

Item

Description Cost

0001 Struers Annual Preventative Maintenance $000.00

0002 Struers Service $000.00

0003 Struers Repairs $000.00

9. Technical Point of Contact NSWCCD assigned technical point of contact will review invoices for payment per each call against this BPA (See G-242-H001).

10. Accounting NSWCCD Accounting and Appropriation data will be included in each call placed under this BPA

13. Product Classification Code: The PSC allowed for ordering against this BPA is J066, NAICS: 541990.

14. Miscellaneous Each BPA Call shall utilize a Minimum Specifications.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Struers Annual Preventative Maintenance

FFP

Annual Preventative Maintenance for but limited to for Abrapol 20, Accutom 5, Accutom 50, Tegramin 30, Discotom 6, Discotom 100, Axitom 5, Citopress 20, Mounting Unit 1-1/2"(200ohm), Mounting Unit 1-1/4"(130ohm), Mounting Unit

25mm(22ohm) and Exotom M. See Performance Work Statement (PWS) for detailed description.

FOB: Destination

VENDOR PART NR: 400000065389-0130

PURCHASE REQUEST NUMBER: 1301155554

PSC CD: J066

NET AMT

0002 1 Lot Struers Service

FFP

Service when needed for Abrapol 20, Accutom 5, Accutom 50, Tegramin 30, Discotom 6, Discotom 100, Axitom 5, Citopress 20, Mounting Unit 1-

1/2"(200ohm), Mounting Unit 1-1/4"(130ohm), Mounting Unit 25mm(22ohm) and

Exotom M. See Performance Work Statement (PWS) for detailed description.

FOB: Destination

VENDOR PART NR: 400000065389-0130

0003 1 Lot Struers Repairs

FFP

Repairs for but limited to for Abrapol 20, Accutom 5, Accutom 50, Tegramin 30, Discotom 6, Discotom 100, Axitom 5, Citopress 20, Mounting Unit 1-

1/2"(200ohm), Mounting Unit 1-1/4"(130ohm), Mounting Unit 25mm(22ohm) and

Exotom M. See Performance Work Statement (PWS) for detailed description.

FOB: Destination

VENDOR PART NR: 400000065389-0130

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

Struers Preventative Maintenance, Repairs, and Small Saw

1.0 INTRODUCTION:

NSWCCD C/612 is requesting servicing for annual preventative maintenance, as-needed repairs, and procurement of a small metallurgical abrasive cutoff saw. The service and equipment will be used by the Materials Division (C/61) laboratories within Buildings 60 of the Naval Surface Warfare Center Carderock Division (NSWCCD) in West Bethesda, MD.

Five-year Preventative maintenance agreement to include all manufacturer recommended inspections, testing, replacement of weak parts, cleaning, greasing, etc. of their metallographic preparation equipment. Also include a service for as-needed repair in the event that unplanned equipment malfunction or breakage occurs. In addition is described for the replacement of an aging small abrasive cutoff saw for sectioning metallurgical samples.

2.0 BACKGROUND:

NSWCCD C/612 performs research and development along with operational support in the area of metallurgical production and maintenance. This tasking includes in-service engineering/ technical support to NAVSEA technical warrant holder and various program offices. C/612 laboratory facilities, specifically the metallurgical laboratory (MetLab), utilize numerous pieces of high value sample preparation and analysis equipment to support tasking.

One of the largest and most wide-reaching manufacturers of metallurgical equipment is Struers, Inc., who make and sell equipment ranging from metallurgical saws and specimen polishers to high tech automated preparation equipment. High value and high usage equipment requires periodic maintenance to continue with full operational capability. Recently, multiple pieces of Struers branded equipment in the laboratory have begun to reach their recommended service dates, and others have begun to show wear or require repairs.

The objective of this purchase is to provide timely required maintenance to all Struers branded equipment in the MetLab to avoid equipment shutdowns and keep high value equipment in working order. The services will be used to maintain operability of the lab space and avoid work stoppages associated with failure of unmaintained equipment, as well as to replace an aging specialty small abrasive cutoff saw for metallurgical samples.

3.0 OBJECTIVE:

3.1 Annual Preventative Maintenance Service of Struers Equipment

3.1.1 The contractor shall perform preventative maintenance per the manufacturer’s protocol for all Struers brand metallography equipment in the NSWCCD metallography lab. Equipment includes the following but not limited to the listed items: The same Service terms described in this PWS shall extend to provide the same support and coverage to new hardware.

Item

Number Name

1 Abrapol 20

2 Accutom 5

3 Accutom 50

4 Tegramin 30

5 Discotom 6

6 Discotom 100

7 Axitom 5

8 Citopress 20

9 Mounting Unit 1-1/2"(200ohm)

10 Mounting Unit 1-1/4"(130ohm)

11 Mounting Unit 25mm(22ohm)

12 Exotom M

3.1.2 Details of preventative maintenance steps for all of the equipment are provided in 3.2.

3.2 Summary of preventative maintenance tasks for Struers equipment – the contractor shall follow all current manufacturer practice and guidelines for preventative maintenance, the below shall serve as a general guide and may be slightly different from current manufacturer practice.

• For the Abrapol 20 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Service sample holders, replace wear parts, grease and adjust

‣ Log error codes and lifetime statistics

‣ Provide service report describing work performed

• For the Accutom 5 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• For the Accutom 50 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• For the Tegramin 30 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Service sample holders, replace wear parts, grease and adjust

‣ Log error codes and lifetime statistics

‣ Provide service report describing work performed

• For the Discotom 6 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• For the Discotom 100 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• For the Axitom 5 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• For the Citopress 20 the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Inspect and adjust hydraulic system, ram movement, oil level, pressure, repair leaks

‣ Test water flow, check for and repair leaks

‣ Clean and grease couplings and solenoid valves

‣ Decalcify mounting units

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

• Mounting units Service 25mm, 1.25 inch, and 1.5 inch

▪ Descale mounting units

▪ Check wiring, heating and cooling system – repair as needed

▪ Clean and grease

• For the Exotom M the following tasks shall be performed as part of the preventative maintenance:

‣ Visual inspection and performance test

‣ Cleaning of exterior and drain system

‣ Check for water ingress

‣ Check electronic components, fuses, sensors, and supply voltages

‣ Replace wear parts and lubricate moving parts

‣ Adjust drive belts if needed

‣ Verify speed regulation and cutting power

‣ Test water flow, check for and repair leaks

‣ Clean and flush cooling water channels and solenoid valves

‣ Test all pumps to ensure correct flow rates

‣ Service clamping tools, replace wear parts, grease and adjust

‣ Check alignment

‣ Update software

‣ Test all machine functions, perform adjustments as needed

‣ Provide service report describing work performed

3.3 Inspection service and/or repair of Struers metallographic equipment.

3.3.1 Inspection of equipment - The contractor shall inspect the equipment and provide a proposal for repair.

3.3.2 Due to the complex nature of the equipment and the need for continual functionality, the contractor shall perform repairs as-needed on-site of any Struers metallurgical equipment. The contractor shall provide the materials and services required to remedy unplanned or unforeseen technical issues with Struers equipment. Resolution of technical issues is subject to agreement with MTS that the issue is able to be solved within the period of performance and maximum dollar value of this option task.

3.4 Small Struers Abrasive Cutoff Saw for Metallurgical Sample Sectioning

3.4.1 The contractor shall supply an Accutom-100 abrasive cutoff saw for metallurgical sectioning. The saw shall have included the basic necessities to be fully functional upon receipt including, but not limited to, basic clamping tools and coolant recirculation system and filters.

4.0 SPECIAL QUALIFICATIONS:

Certified technician or field engineer for Struer equipment.

5.0 APPLICABLE DOCUMENTS

N/A

6.0 GOVERNMENT FURNISHED EQUIPMENT/PROPERTY/INFORMATION

7.0 DELIVERABLES

8.0 SECURITY REQUIREMENTS: Unclassified

9.0 GOVERNMENT TECHNICAL POINTS OF CONTACT (TPOC)

TBD

10.0 PLACE OF PERFORMANCE

The contractor shall provide all services at the Naval Surface Warfare Center Carderock Division, located in West Bethesda, MD.

NSWC Carderock Division 9500 MacArthur Blvd.

West Bethesda, MD 20817-5700

The contractor is expected to arrange travel and transportation for personnel and equipment required to complete all tasks.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 24-MAY-2024 TO

23-MAY-2029

N/A N/A

FOB: Destination

0002 POP 24-MAY-2024 TO

0003 POP 24-MAY-2024 TO

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-17 Ownership or Control of Offeror AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-20 Predecessor of Offeror AUG 2020

52.204-22 Alternative Line Item Proposal JAN 2017

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

SEP 2023

52.212-3 Offeror Representations and Certifications--Commercial

Products and Commercial Services

FEB 2024

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

NOV 2023

52.229-11 Tax on Certain Foreign Procurements--Notice and

Representation

JUN 2020

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

JAN 2023

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements NOV 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023

252.225-7048 Export-Controlled Items JUN 2013

252.225-7972 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned

Aircraft Systems (DEVIATION 2020-O0015)

MAY 2020

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JAN 2023

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.246-7008 Sources of Electronic Parts JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--

Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-

Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph

(d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The

Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government intends to award a contract to the responsible quoter who (1) is the Lowest Price

Technically Acceptable quotation, (2) conforms to the solicitation, (3) proposes a price that is fair and reasonable, and (4) will be most advantageous to the Government, price and other factors considered.

The following factors shall be used to evaluate quotations:

Factor 1 Price

Quotes must include a proposed price for each Contract Line Item Number (CLIN). The Government will determine prices to be fair and reasonable in accordance with FAR Part 13.106-3 based on, but limited to, market research, current or previous purchases, prices for similar performance in a related industry, and comparison to an independent Government estimate.

https://www.sam.gov/

Quoters responding to this solicitation are advised that, prior to award, the Government may request quoters to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts.

Factor 2 Technical Capability/Approach

The Government will evaluate the Quoter for acceptability of Technical Capability.

Minimum Requirements:

The following are the minimum requirements a quote must meet to be deemed acceptable for the Technical Capability factor:

1) A quote is deemed acceptable for the Technical Capability factor if it meets all requirements as defined in the solicitation Performance Work Statement (PWS)/Statement of Work (SOW) and/or minimum specifications.

2) Technical Capability/Approach evaluations will result in one of the following ratings:

TABLE 1 - TECHNICAL RATINGS

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation.

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation.

A quote must be rated "ACCEPTABLE" for the quote to be eligible for award. An "UNACCEPTABLE" rating for Technical Capability/Approach factor will result in the entire quote being rated "UNACCEPTABLE" overall; an overall rating of "UNACCEPTABLE" makes a quote ineligible for award. A quote must contain sufficient information to enable evaluators to determine acceptability; if there is insufficient information to determine acceptability of the quote, the quote will be rated “UNACCEPTABLE” overall.

QUESTIONS: Any questions in relation to this solicitation shall be submitted to Chris Rolince email at Christopher.c.rolince.civ@us.navy.mil

The cut-off date for questions is 10:00 AM EST on May 27, 2024.

(b) Options. The Government will evaluate quotations for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that a quotation is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option (s).

mailto:Christopher.c.rolince.civ@us.navy.mil

(c) The Government shall mail or email a written notice of award to the successful quoter. Upon receipt, the quoter shall either commence performance, or have an authorized representative sign the award and return it to the Contracting Officer; a binding contract is formed upon the earlier of either of those actions.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (FEB 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and

10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV

2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

___ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community--see

FAR 3.900(a).

__X_ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (6) [Reserved]

___ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

__X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of

Pub. L. 117-328).

___ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders--Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (DEC 2023) (Pub. L. 115-390, title II).

___ (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L.

115-390, title II).

___ (ii) Alternate I (DEC 2023) of 52.204-30.

___ (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41

U.S.C. 2313).

____ (14) [Reserved]

____ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

____ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (17) [Reserved]

____ (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

____ (21)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2023) of 52.219-9.

____ (22) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small

Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

____ (26) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

__X__ (30) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

__X__ (31) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

__X__ (32) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2024) (E.O. 13126).

__X__ (33) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

__X__ (34)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

__X__ (35)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

____ (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (37) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

____ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

__X__ (39)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (40) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (41)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN

2016) (E.O. 13693).

____ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(JUN 2016) (E.O. 13693).

____ (44)(i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and

13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (45)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (46) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (47)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s

13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

__X__ (48) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O.

13513).

____ (49) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (50) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (51)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (52) (i) 52.225-1, Buy American--Supplies (OCT 2022) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (53)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public

Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I [Reserved].

____ (iii) Alternate II (DEC 2022) of 52.225-3.

____ (iv) Alternate III (FEB 2024) of 52.225-3.

____ (v) Alternate IV (OCT 2022) of 52.225-3.

____ (54) 52.225-5, Trade Agreements (NOV 2023) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__X__ (55) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (56) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

____ (57) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (58) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

____ (59) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (60) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV

2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

____ (61) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41

U.S.C. 4505, 10 U.S.C. 3805).

__X__ (62) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31

U.S.C. 3332).

____ (63) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (JUL

2013) (31 U.S.C. 3332).

____ (64) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (65) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (66) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (67)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting

Officer check as appropriate.]

_____ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple

Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY

2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O.

13658).

_____ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and

Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L.

117-328).

(vii)(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L. 115-

390, title II).

(B) Alternate I (DEC 2023) of 52.204-30.

(viii) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(x) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

(xi) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (AUG 2018), (41 U.S.C. chapter 67).

(xvi) ___X__ (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22…