N0016723Q0238 CSS.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. The Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for Preventative Maintenance for Harbor Security Boats and Oil Spill Response Boats.

This requirement is solicited as 100% set aside for small business.

The NAICS code is 336611 and the Small Business Standard is 1,5300 Employees

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2023-04 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 2023720. SEE ATTACHED SOLICITATION FOR

CLAUSES AND PROVISIONS.

The Government will award a contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

Questions/clarification regarding this solicitation must be submitted via email to tracy.l.mcdonough2.civ@us.navy.mil by 10:00 AM EST on Wednesday 9 August 2023. All questions will be answered in an amendment to the solicitation.

Quote packages are due on or before 10:00 AM EST on Monday 14 August 2023 to tracy.l.mcdonough2.civ@us.navy.mil Late quotes will not be considered. All responses shall include price(s), Cage Code, and point of contact name & phone number. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

The Point of Contact for this acquisition is Tracy McDonough tracy.l.mcdonough2.civ@us.navy.mil

N0016723Q0238

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Preventive Maintenance on CNRMA

FFP

Preventative Maintenance (PM) on four (4) Harbor Security Boats (HSBs), five (5) Oil Spill Recovery (OSR) boats and associated trailers and equipment in accordance with the below Performance Work Statement FOB: Destination

VENDOR PART NR: 100002046216-0953

PURCHASE REQUEST NUMBER: 1301101243

PSC CD: J019

NET AMT

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

Naval Weapon Station Earle, NJ

Preventative Maintenance for Harbor Security Boats and Oil Spill Response Boats

1.0 DESCRIPTION OF SUPPLY SPECIFICATION AND INSTALLATION

The Naval Weapons Station Earle, NJ, has a requirement for Preventative Maintenance (PM) on four (4) Harbor Security Boats (HSBs), five (5) Oil Spill Recovery (OSR) boats and associated trailers and equipment. Preventative Maintenance under this contract shall be performed at the contractor’s facility unless the PM is minor and can be performed on-site without interference of base operations.

2.0 BACKGROUND

The Naval Weapons Station Earle, NJ, provides ammunition to the fleet and assigned shore organizations within its Area of Responsibility (AOR). The base provides Operational Support (OS) infrastructures to the operating forces of the Navy, other Navy organizations and tenant commands.

3.0 OBJECTIVE

3.1 The contractor shall provide labor and materials to perform the identified PM utilizing knowledgeable and experienced personnel on harbor security boats, oil spill response boats, and associated trailers and equipment for the Commander Navy Region Mid Atlantic (CNRMA) located Earle, NJ.

3.1.1 Preventative maintenance required under resultant contract shall be performed at the contractor’s facility; unless, PMs are minor and can be performed on-site without interference with base operations. If the maintenance necessitates that a boat be transported off-site, the government will drop the boat and trailer at vendor’s facility within 50 miles of Naval Weapons Station Earle, NJ. The vendor shall provide secure inside and/or on-site storage of the boat (and trailer) while in the vendor’s possession.

Once PM is complete, the vendor shall coordinate with the Contracting Officer Representative (COR) and Technical Assistant (TA), a date and time for the government to pick up the boat.

3.1.2 Service shall include all periodic manufacturer required maintenance to ensure that boats are in operational order at all times. Boats shall be maintained for 100% performance and usability. This includes but is not limited to: All Marine Safety Equipment, Lights, Bilge Pumps, Instruments and Gauges, Switches, Electrical Wiring, Raw Water Systems, Electronic and Electrical systems, Outboard and Inboard Engines and Zincs.

3.1.3 Small tasks such as visual inspections can be done on-site. Oil change, anti-freeze change, other work involving hazardous materials and/or environmental concerns, and/or other large maintenance work shall be performed at vendor’s facility.

3.1.4 The vendor shall provide certified technicians to perform preventative maintenance of boats and associated trailers. When certified technicians are replaced with new hired technician, the new technician certifications shall be provided to the COR.

3.1.5 The COR or TPOC will notify the vendor via phone, fax or email for all preventative maintenance

3.1.6 Vendor shall contact the COR or TA within one business day of receipt of request for scheduled preventive maintenance. The vendor shall coordinate the date & time (to include how long boat will be at vendor facility for those requiring accomplishment at vendor facility) for scheduled preventive maintenance with the COR to accommodate priority and volume of work issues.

3.1.7 Replacement parts (filters, anodes, etc) and consumable supplies in support of the

Preventive Maintenance shall be provided by the vendor.

3.1.8 The vendor shall submit a monthly electronic report (CDRL A001) of the preventative maintenance accomplished and findings to the COR and TA thereby the third business day of the month. All reports shall include details of all actions taken and measurement parameters completed as part of the inspection, including but not limited to proper functioning of the equipment and findings by certified vendor’s technicians.

3.2 32 FT HARBOR SECURITY BOATS AND TRAILERS - GENERAL SPECIFICATIONS AND

PREVENTATIVE MAINTENANCE TASKINGS

3.2.1 GENERAL SPECIFICATIONS FOR HSB BOATS

a. Length (overall) 36 feet 1-inch (10.9 m)

b. Length (at waterline) 25 feet 8 inches (7.8 m)

c. Length (overall on trailer) 36 feet 1-inch (10.9 m)

d. Beam (overall) 9 feet 11 inches (3 m)

e. Operational Draft (engines lowered/vertical) 35 1/2 inches (90 cm)

f. Draft (engines raised) 23 inches (58.4 cm)

g. Height (keel to top of radome, mast stowed) 11 feet 2 inches (3.4 m)

h. Height (mast raised) 14 feet 3/4 inches (4.3 m)

i. Height (on trailer, mast stowed) 13 feet 3 inches (4 m)

j. Propulsion twin Yamaha 225 HP (F225NCA)

k. Generator Westerbeke 6.5 KW Marine Gasoline Generator (32HS1608, Westerbeke

7.5 KW Marine Gasoline Generator)

3.2.2 TRAILERS - PREVENTATIVE MAINTENANCE ACTIONS

3.2.2.1 QUARTERLY INSPECTION (Quantity Ordered 4)

3.2.2.1.1 Brake Actuator (check for leaks and operation)

3.2.2.1.2 Axles (inspect for damage/loose fasteners)

3.2.2.1.3 Rims (inspect for damage)

3.2.2.1.4 Brake lines (check for wear/damage/leaks)

3.2.2.1.5 Wheel nuts and bolts (tighten to specific torque values)

3.2.2.1.6 Tire Condition (inspect for cuts, wear, and bulging, etc.)

3.2.2.1.7 Wiring (test operation and Inspect wiring for bare spots, frays, etc.)

3.2.2.1.8 Provide report of accomplishment and all findings in monthly report (CDRL A001)

3.2.3 BOAT HULL AND BODY - PREVENTATIVE MAINTENANCE ACTIONS

3.2.3.1 QUARTERLY INSPECTION AND HULL CLEANING (Quantity Ordered 4)

3.2.3.1.1 Power wash to clean underwater hull, ensure excessive pressure is not utilized damaging the underwater paint.

3.2.3.1.2 Shore Power Inlet Marinco Model 301EL-B (clean and inspect

Shore Power Receptacles)

3.2.3.1.3 Propulsion Engine Neutral Safety Switch (test operation)

3.2.3.1.4 Window Wipers (inspect arms and blades)

3.2.3.1.5 Inspect Hull bottom (inspect paint/damage)

3.2.3.1.6 Inspect Bulkheads and superstructure (inspect and report)

3.2.3.1.7 Bilges (inspect/clean)

3.2.3.1.8 Beading, Cleats, and Transoms (inspect welds/paint/damage)

3.2.3.1.9 Inspect Hull Zincs

3.2.3.1.10 Provide report of accomplishment and all findings in monthly

3.2.4 INTEGRATED ELECTRONIC NAVIGATION/SURVEILLANCE SYSTEMS -

PREVENTATIVE MAINTENANCE ACTIONS

3.2.4.1 SEMIANNUAL INSPECTION (Quantity Ordered 4)

3.2.4.1.1 TZT14 Display/Radome Furuno, Model DRS4D (operate and check cables)

3.2.4.1.2 Network Sounder Furuno, Model DFF1 (inspect

transponder/monitor operation and wire cable)

3.2.4.1.3 AIS Receiver FA-30, (check cables/wires/antenna for damage, remove any rust and dust)

3.2.4.1.4 UHF Marine Transceiver Motorola, Model XTL 5000 (check operation and connections)

3.2.4.1.5 VHF Marine Transceiver Model GX5500S (check operation and connections)

3.2.4.1.6 Intercom System Gentex, model LVISm5 (check operation and connections)

3.2.4.1.7 FLIR Forward-Looking Thermo Imager Camera (check

operation and connections)

3.2.4.1.8 Magnetic Compass Ritchie Model FN-201-NVI (check

light/wiring)

3.2.4.1.9 Siren and Public Address (PA) speaker horn (check operation and connections)

3.2.4.1.10 NavNet Display with a 4kW, 36 Nmi Scanner (check

operation and connections)

3.2.4.1.11 Boat Navigation Boat Horn (check operation)

3.2.4.1.12 Navigation Side Lights Perko, Model 0602DP1BLK (check operation and wiring)

3.2.4.1.13 Spotlight Golight, Model Stryker 3049R (check operation and connections)

3.2.4.1.14 Engine Remote Controller (check for binding/hard

shifting/clutching in and out of gear)

3.2.4.1.15 Remotely-Controlled Searchlight (check operation and connections)

3.2.4.1.16 Blue Strobe Beacons and the Loud-Hailer Speaker (check operation and connections)

3.2.4.1.17 Provide report of accomplishment and all findings in monthly

3.2.4.1.18 report (CDRL A001)

3.2.5 HVAC, AIRXCEL MODEL 48203-9666 - PREVENTATIVE MAINTENANCE

ACTIONS

3.2.5.1 SEMIANNUAL INSPECTION (Quantity Ordered 4)

3.2.5.1.1 Air filter, non-allergenic natural fibers (inspect and clean)

3.2.5.1.2 Condenser Coils (inspect and clean as required)

3.2.5.1.3 A/C and Heating Systems (check operation and connections)

3.2.5.1.4 Roof Fasteners (check for tightness and condition)

3.2.5.1.5 Plastic Shroud (check fasteners and condition)

3.2.5.1.6 Blower Drive Motor (two drops in each oil hole with SAE 20 non-detergent type oil)

3.2.5.1.7 Provide report of accomplishment and all findings in monthly

3.2.6 HYDRAULIC STEERING - PREVENTATIVE MAINTENANCE ACTIONS

3.2.6.1 SEMIANNUAL INSPECTION (Quantity Ordered 4)

3.2.6.1.1 Steering Cylinder Uflex, Model UC128OBF (inspect for damage/leaks/full travel movement)

3.2.6.1.2 Steering Hoses (check hoses for signs of wear/fittings-tighten if required) N0016721P0179 Page 8 of 36

3.2.6.1.3 Steering Pump, Helm Uflex, Model UP39-T (check fluid level and leaks/travel movement)

3.2.6.1.4 Steering Tie Bar Uflex, Model A90X28 (check for any interference and fasteners are tight)

3.2.6.1.5 Provide report of accomplishment and all findings in monthly

3.2.7 EPIRB – PREVENTATIVE MAINTENANCE ACTIONS

3.2.7.1 QUARTERLY INSPECTION (Quantity Ordered 4)

3.2.7.1.1 Mounting Bracket (inspected for deterioration and/or residue buildup)

3.2.7.1.2 Beacon (check antenna tightness and cracks)

3.2.7.1.3 Check expiration date on ACR Automatic Release

3.2.7.1.4 Provide report of accomplishment and all findings in monthly

3.2.8 ELECTRICAL SYSTEM - PREVENTATIVE MAINTENANCE ACTIONS

3.2.8.1 QUARTERLY INSPECTION (Quantity Ordered 4)

3.2.8.1.1 Batteries, Optima SC34DM (check connections tightness, cables and corrosion on all terminals)

3.2.8.1.2 Bilge Pump/Float and Drainage System (check operation and condition)

3.2.8.1.3 Trim Tabs Lectrotab, Model CKASB16X12-8837 (check

operation)

3.2.8.1.4 Blowers and 12VDC Exhaust Fan (check operation)

3.2.8.1.5 Cabin Fans (check operation and wire condition)

3.2.8.1.6 King Electric Cabin Heaters (clean soft bristle brush/vacuum, check operation and condition)

3.2.8.1.7 Valad Defroster Windshield Defroster (check operation and condition)

3.2.8.1.8 Circuit breaker Panel (clean panel and check wiring and breaker operation)

3.2.8.1.9 Battery Charger (check LED

status/fuses/breakers/ventilation/terminal/shroud/wires)

3.2.8.1.10 Vessel lighting, interior (check operation and wiring)

3.2.8.1.11 Vessel lighting, exterior (check operation and wiring)

3.2.8.1.12 Portable Spotlight Golight, Model Profiler II (check charger/operation)

3.2.8.1.13 Receptacles (check for power/condition)

3.2.8.1.14 Provide report of accomplishment and all findings in monthly

3.2.9 ENGINE AND PROPULSION MAINTENANCE - PREVENTATIVE

MAINTENANCE ACTIONS

3.2.9.1 Every 100 Hours (Quantity Ordered 0)

3.2.9.1.1 Anode(s) (external) inspect and replace as necessary

3.2.9.1.2 Anode (cylinder head exhaust passage) inspect and replace as necessary

3.2.9.1.3 Battery (electrolyte level, terminal) inspect

3.2.9.1.4 Battery (electrolyte level, terminal) fill, charging as necessary

3.2.9.1.5 Cooling water leakage inspection

3.2.9.1.6 Cowling lock lever inspection

3.2.9.1.7 Engine starting condition/noise inspection

3.2.9.1.8 Engine idle speed/noise inspection

3.2.9.1.9 Engine oil replacement

3.2.9.1.10 Engine oil filter (cartridge) replacement

3.2.9.1.11 Fuel filter/water separator (can be disassembled)

replacement

3.2.9.1.12 Fuel line (high pressure) inspection

3.2.9.1.13 Fuel line (low pressure) inspection

3.2.9.1.14 Fuel/engine oil leakage inspection

3.2.9.1.15 Gear oil replacement

3.2.9.1.16 Greasing points grease

3.2.9.1.17 Impeller/water pump housing inspection

3.2.9.1.18 Power trim and tilt unit inspection

3.2.9.1.19 Propeller/propeller nut/cotter pin inspection

3.2.9.1.20 Spark plugs inspection or replacement

3.2.9.1.21 Ignition coils/ignition coil leads inspection

3.2.9.1.22 Water from cooling water pilot hole inspection

3.2.9.1.23 Thermostat inspection

3.2.9.1.24 Timing belt inspection

3.2.9.1.25 Coiling water inlet inspection

3.2.9.1.26 Main switch/stop switch inspection

3.2.9.1.27 Wire harness connection/wire coupler connections inspection

3.2.9.1.28 Connector connections/lead connections inspection

3.2.9.1.29 (Yamaha) meter/gauge inspection

3.2.9.1.30 Provide report of accomplishment and all findings in monthly report (CDRL A001)

3.2.9.1.31 Label all replaced filters with maintenance man initial, engines hours, and date

3.2.9.2 Every 300 Hours (Quantity Ordered 0)

3.2.9.2.1 Fuel pump inspection

3.2.9.2.2 Impeller/water pump housing replacement

3.2.9.2.3 Provide report of accomplishment and all findings in monthly

3.2.9.3 Every 500 Hours (Quantity Ordered 2 boats/4 engines)

3.2.9.3.1 All items in the listed above in "100 Hour" category

3.2.9.3.2 All items in the listed above in "300 Hour" category

3.2.9.3.3 Anodes, cylinder head, cylinder block, oil cooler cover & exhaust guide replacement

3.2.9.3.4 Fuel filter/water separator replacement

3.2.9.3.5 OCV filter replacement

3.2.9.3.6 Valve clearance inspection and adjustment

3.2.9.3.7 Provide report of accomplishment and all findings in monthly report (CDRL A001)

3.2.9.3.8 Label all replaced filters with maintenance man initial,

3.2.9.4 Every 1000 Hours (Quantity Ordered 2 boats/4 engines)

3.2.9.4.1 All items in the listed above in "100 Hour" category

3.2.9.4.2 All items in the listed above in "300 Hour" category

3.2.9.4.3 All items in the listed above in "500 Hour" category

3.2.9.4.4 Exhaust guide/exhaust manifold inspection

3.2.9.4.5 Timing belt replacement

3.2.9.4.6 Provide report of accomplishment and all findings in monthly

3.2.10 GENERATOR MAINTENANCE - PREVENTATIVE MAINTENANCE ACTIONS

3.2.10.1 Every 50 Hours (generator) (Quantity Ordered 0)

3.2.10.1.1 Drive belts (freshwater/raw water pumps) inspection for proper tension (3/8” to ½” deflection) and adjust if needed.

Check belt for slipping, cracking and wear. Adjust tension.

Replace cover.

3.2.10.1.2 Starting Batteries check electrolyte levels. Make sure cables and connections are in good order. Clean off corrosion if needed. Apply petroleum jelly to terminals for corrosion protection.

3.2.10.1.3 Electric fuel pump, inspect for leaks, ensure fuel and electrical connections are clean and tight.

3.2.10.1.4 Zinc anodes, inspect and clean zinc anode.

3.2.10.1.5 Provide report of accomplishment and all findings in monthly

3.2.10.2 Every 100 Hours (generator) (Quantity ordered 0)

3.2.10.2.1 Engine oil and filter, change engine oil and filter.

3.2.10.2.2 Air screen/flame arrestor, remove, clean and re-install screen pack. Replace rubber sealing ring.

3.2.10.2.3 Label all replaced filters with maintenance man initial, engines hours, and date

3.2.10.2.4 Provide report of accomplishment and all findings in monthly

3.2.10.3 Every 250 Hours (Generator) (Quantity Ordered 0)

3.2.10.3.1 All items in the listed above in "50 Hour" category

3.2.10.3.2 All items in the listed above in "100 Hour" category

3.2.10.3.3 Fuel/Water Separator Filter (change/replace)

3.2.10.3.4 Exhaust elbow/exhaust system, check integrity of the water injected exhaust elbow casting. Check the integrity of the exhaust system attached to the elbow. All hose connections should be secure. No chafing. No exhaust leaks. Hoses and muffler are in good serviceable condition

3.2.10.3.5 Fuel filter and O-rings, remove and replace fuel filter and all sealing O-rings

3.2.10.3.6 Inlet Fuel Filter remove and replace inlet fuel filter

3.2.10.3.7 Generator check that AC connections are clean and secure.

Ensure wires have no chafing)

3.2.10.3.8 Hoses engine hoses should be hard and tight. Check and tighten all hose clamps as needed

3.2.10.3.9 Vibration Isolators/Engine Mounts check vibration isolators, brackets and mounting hardware.

3.2.10.3.10 Heat exchanger open heat exchanger end cap(s) and clean out debris. Replace gasket and O-rings

3.2.10.3.11 Provide report of accomplishment and all findings in monthly report (CDRL A001)

3.2.10.3.12 Label all replaced filters with maintenance man initial,

3.2.10.4 Every 500 Hours (Generator) (Quantity Ordered 2)

3.2.10.4.1 All items in the listed above in "50 Hour" category

3.2.10.4.2 All items in the listed above in "100 Hour" category

3.2.10.4.3 All items in the listed above in "250 Hour" category

3.2.10.4.4 Zinc anodes, replace

3.2.10.4.5 Raw Water Pump remove the pump cover and inspect the pump assembly for wear, especially can and wear plates.

Replace the impeller and gasket. Lubricate the impeller when re-assembling

3.2.10.4.6 Exhaust System Catalyst inspect for proper operation

3.2.10.4.7 Ignition System inspect for deterioration. Test resistance

3.2.10.4.8 Coolant System drain, flush and refill the cooling system with appropriate antifreeze mix. Replace the thermostat and coolant cap

3.2.10.4.9 Valve Clearance adjust valves

3.2.10.4.10 Starter motor check solenoid and motor for corrosion.

Remove and lubricate. Clean and lubricate the start motor pinion drive

3.2.10.4.11 Provide report of accomplishment and all findings in monthly

3.2.10.5 Every 1000 Hours (Generator) (Quantity Ordered 2)

3.2.10.5.1 All items in the listed above in "50 Hour" category

3.2.10.5.2 All items in the listed above in "100 Hour" category

3.2.10.5.3 All items in the listed above in "250 Hour" category

3.2.10.5.4 All items in the listed above in "500 Hour" category

3.2.10.5.5 Engine Timing Belt remove and replace the timing belt

3.2.10.5.6 Heat Exchanger, remove the heat exchanger for professional cleaning and pressure testing

3.2.10.5.7 Diverter Valve remove and replace

3.2.10.5.8 Provide report of accomplishment and all findings in monthly

3.3 OSR VESSELS- 26 FT. AND 30 FT. OIL SPILL RESPONSE BOATS, TRAILERS, AND

ASSOCIATED EQUIPMENT - GENERAL SPECIFICATIONS AND PREVENTATIVE

MAINTENANCE TASKINGS

3.3.1 GENERAL SPECIFICATIONS FOR OSR TRAILERS, BOATS, AND

EQUIPMENT

3.3.1.1 TRAILERS

Description Quantity Identification Boats

Boat Trailer (3 Axel) 2 Lazier Trailer-Skimmer EZ-Loader-Platform

30OP0901 and

30BP0803

Boat Trailer (2 Axel) 3 EZ-Loader Trailer 26UB0507/10/11

3.3.1.2 BOATS

Description Quantity Identification Kvichak Skimmer 1 30OP0901

North River Platform 1 30BP0803

ALMAR’S 1 26UB0507

ALMAR’S 1 26UB0510

ALMAR’S 1 26UB0511

3.3.1.3 MOTORS

Honda Outboard Engine

2 Honda BF 150 HP 4-Stroke Outboard Motor

30BP0901

Honda Outboard Engine

2 Honda BF 90 HP 4-Stroke Outboard Motor

30OP0803

Mercury Outboard Engine

6 Mercury 115 HP 4-Stroke Outboard Motor

26UB0507/10/11

3.3.1.4 VARIOUS SYSTEMS

Hydraulic Steering 2 Sea Star 30OP0803 Hydraulic Steering 1 SeaStar 26UB0507/10/11/30BP0901

FURUNO GPS/

WAAS Navigator

1 GPSMAP 30OP0803

VHF Marine Radio 2 Standard Horizon 30OP0901 and 30BP0803 VHF Marine Radio 3 Standard Horizon 26UB0507/10/11

FURUNO RADAR 1 R200-0408 30BP0901

3.3.2 TRAILERS - PREVENTATIVE MAINTENANCE ACTIONS

3.3.2.1 QUARTERLY INSPECTION (Quantity Ordered 5)

3.3.2.1.1 Brake Actuator (check for leaks and operation)

3.3.2.1.2 Axles (inspect for damage/loose fasteners)

3.3.2.1.3 Rims (inspect for damage)

3.3.2.1.4 Brake lines (check for wear/damage/leaks)

3.3.2.1.5 Wheel nuts and bolts (tighten to specific torque values)

3.3.2.1.6 Tire Condition (inspect for cuts, wear, and bulging, etc.)

3.3.2.1.7 Wiring (test operation and Inspect wiring for bare spots, frays, etc.)

3.3.2.1.8 Provide report of accomplishment and all findings in monthly

3.3.3 INTEGRATED ELECTRONIC NAVIGATION SYSTEMS

3.3.3.1 SEMIANNUAL INSPECTION (Quantity Ordered 5)

3.3.3.1.1 Inspect IAW associated manufacturer's technical publications Owner's Guide and/or Operator's Manual for the following:

3.3.3.1.2 Navigation Monitoring Systems and associated antennas (check operation, fraying of wires, loose connections and corrosion)

3.3.3.1.3 VHF Marine Radio. Microphone and Associated Antenna (check operation, fraying of wires, loose connections and corrosion)

3.3.3.1.4 Magnetic Compass (check operation and cleanliness)

3.3.3.1.5 Provide report of accomplishment and all findings in monthly

3.3.4 FIRE SUPPRESSION

3.3.4.1 ANNUALLY INSPECTION (Quantity Ordered 2)

3.3.4.1.1 IAW Inspection, Maintenance & Recharge Service Manual and Manufacturer Instructions

3.3.4.1.2 Verify it is located in designated place with no access or visible obstructions.

3.3.4.1.3 Check to make sure that the instructions and nameplate is securely fastened and legible.

3.3.4.1.4 Check safety seals and tamper indicators are not broken or missing.

3.3.4.1.5 Clean extinguisher to remove dirt, grease or foreign material.

3.3.4.1.6 Check for physical damage, corrosion, abrasions, dents, weld damage, leakage or clogged nozzle.

3.3.4.1.7 Visually inspect pressure gauge reading are in the proper range or position.

3.3.4.1.8 Check fullness by weighing bottle.

3.3.4.1.9 Check date of manufacture (Cylinder must be hydrostatically tested every 5 years).

3.3.4.1.10 Visually inspect the base/foot stand.

3.3.4.1.11 Check ring pin for freedom of movement.

3.3.4.1.12 Inspect discharge lever for dirt and corrosion.

3.3.4.1.13 Inspect and clean hose assembly.

3.3.4.1.14 Install new tamper seal and record data on the inspection tag.

3.3.4.1.15 Provide report of accomplishment and all findings in monthly

3.3.5 BOAT HULL AND BODY - PREVENTATIVE MAINTENANCE ACTIONS

3.3.5.1 QUARTERLY INSPECTION AND HULL CLEANING (Quantity Ordered 5)

3.3.5.1.1 Power wash to clean underwater hull, ensure excessive pressure is not utilized damaging the underwater paint.

3.3.5.1.2 Inspect Hull bottom (inspect paint/damage)

3.3.5.1.3 Inspect Bulkheads and superstructure (inspect and report)

3.3.5.1.4 Bilges (inspect/clean)

3.3.5.1.5 Beading, Cleats, and Transoms (inspect welds/paint/damage)

3.3.5.1.6 Inspect Hull Zincs

3.3.5.1.7 Provide report of accomplishment and all findings in monthly

3.3.6 OTHER SYSTEMS - PREVENTATIVE MAINTENANCE ACTIONS

3.3.6.1 Boat Accessories ANNUAL INSPECTION (Quantity Ordered 5)

3.3.6.1.1 IAW OEM Manual/Instructions

3.3.6.1.2 Check engine tow bar welds and fasteners.

3.3.6.1.3 Check condition of railing assemblies.

3.3.6.1.4 Clean bilge compartments.

3.3.6.1.5 Provide report of accomplishment and all findings in monthly

3.3.7 ELECTRICAL SYSTEMS - PREVENTATIVE MAINTENANCE ACTIONS

3.3.7.1.1 Batteries QUARTERLY INSPECTION (Quantity Ordered 5)

3.3.7.1.1.1 IAW associated manufacturer's technical publications and operator's manuals for the following:

3.3.7.1.1.2 Battery - Clean battery posts and apply light coat of grease to cable ends.

3.3.7.1.1.3 Battery Selector Switch - Clean battery posts and apply light coat of grease to cable ends.

3.3.7.1.1.4 Clean battery compartment/box.

3.3.7.1.1.5 Inspect battery mounting brackets and securing devices for damage & corrosion.

3.3.7.1.1.6 Test run engines and house electrical/electronic

components.

3.3.7.1.1.7 Provide report of accomplishment and all findings in monthly report (CDRL A001)

4.0 GOVERNMENT FURNISHED EQUIPMENT AND PROPERTY

4.1 All property to be furnished to the contractor is listed in CDRL A002 and its attached spreadsheet.

4.2 If the PM necessitates that a boat be transported off-site, it shall be the government’s responsibility to load the boat on a trailer, provide over the road transportation to the contractor’s facility. Contractor shall provide onsite secure storage for the boat while it is the contractor's possession. Once the PM is complete, the government shall be notified so they may pick up the boat. The contractor is solely responsible for obtaining all necessary vehicle passes, stickers and proper ID cards for all contractor employees requiring access to the Base. The contractor shall comply with all Federal, State, Local laws and Federal Regulations as applicable to tasks included in this PWS

4.3 All property will be delivered to the following address:

Attention: Clifford Unruh

CNRMA Port Operation Naval Weapons Station Earle 201 Highway 34S Colts Neck, New Jersey 07722-5001 Phone: 860-694-3756

4.4 APPLICABLE DOCUMENTS/REFERENCES

Document Type

No./Version Title Date

OEM Manual Westerbeke Operator Manual OEM Manual Yamaha F225-LF225 Operator Manual

BIB S9008-KT-

BIB-010

32-Foot Harbor Security Boat Hulls 32HS1301-1317.

32HS1401-1412, 32HS1501-1504 and 32HS1601-1609

OEM Manual Mercury outboard Operation and Maintenance OEM Owner’s Manual for Almar Sounder Patrol Rescue 26’ OEM Owner’s Operation Manual EZ Loader Boat Trailers OEM Honda Marine BF75A/90A Owner’s Manual OEM Honda Marine BF135A/150A Owner’s Manual

5.0 DELIVERABLES

5.1 All work will be complete and delivered to government by end of the Period of Performance of the contract.

5.2 The contractor shall provide deliverables as described in the PWS and as listed below:

Number Name A001 Monthly Accomplishment and Findings Report A002 GFP Government Furnished Equipment/Property

6.0 ADDITIONAL INFORMATION

6.1 The contractor is responsible for providing all the necessary personnel, equipment, labor, parts, fuel, and supplies to complete this task. The contractor shall provide all personal protective equipment and preventative maintenance materials required to perform the specific tasks as defined in this section.

6.2 The contractor will notify the COR in writing in advance of any delays.

6.3 Due to security measures, delays may occur during vehicle inspection to obtain Base entry.

Additionally, pier access for PM may require additional inspections and passes. Hours may not be charged for delays due to vehicle breakdown or failure to obtain proper Base ID in advance

7.0 GOVERNMENT POINT OF CONTACT:

7.1 Contracting Officer Representative (COR): To be determined at time of award

7.2 The Technical Point of Contact (TPOC) is the contracting officer’s representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is: To be determined at time of award

8.0 SECURITY REQUIREMENTS

8.1 All items generated will be UNCLASSIFIED.

9.0 PERIOD OF PERFORMANCE

9.1 The overall Period of Performance shall be from date of award through 31 January 2024

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 CDRL A001_Test Inspect

Report

Attachment 2 DI-NDTI- 80809B_TestInspection Report CDRL A001

Attachment 3 CDRL A002 GFP Attachment 4 DI-MGMT-80441C_GFP

List CDRL A002

Attachment 5 GFP Attachment HS Boats Earle

Attachment 6 Govt. Furnished Information

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 21-AUG-2023 TO

31-JAN-2024

N/A NAVAL WEAPONS STATION EARLE

CLIFFORD UNRUH

CNRMA PORT OPERATION

201 HIGHWAY 34 SOUTH

COLTS NECK NJ 07722-5001

860-694-3756 FOB: Destination

N69213

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-21 Basic Safeguarding of Covered Contractor Information Systems

NOV 2021

52.204-22 Alternative Line Item Proposal JAN 2017 52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

MAR 2023

52.212-3 Alt I Offeror Representations and Certifications--Commercial Products and Commercial Services (DEC 2022) Alternate I

OCT 2014

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

DEC 2022

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.237-1 Site Visit APR 1984 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.245-1 Government Property SEP 2021 52.245-2 Government Property Installation Operation Services APR 2012 52.245-9 Use And Charges APR 2012 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.203-7005 Representation Relating to Compensation of Former DoD Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7009 Limitations on the Use or Disclosure of Third-Party

Contractor Reported Cyber Incident Information

JAN 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.211-7007 Reporting of Government-Furnished Property MAR 2022 252.215-7013 Supplies and Services Provided by Nontraditional Defense

Contractors

JAN 2023

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7048 Export-Controlled Items JUN 2013 252.225-7059 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region - Representation

JUN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

JUN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.245-7001 Tagging, Labeling, and Marking of Government-Furnished Property

APR 2012

252.245-7002 Reporting Loss of Government Property JAN 2021 252.245-7003 Contractor Property Management System Administration APR 2012 252.245-7004 (Dev) Reporting, Reutilization, and Disposal (DEVIATION 2022-

O0006)

NOV 2021

252.246-7008 Sources of Electronic Parts JAN 2023 252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The

Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government intends to award a contract to the responsible quoter who (1) is the Lowest Price

Technically Acceptable quotation, (2) conforms to the solicitation, (3) proposes a price that is fair and reasonable, and (4) will be most advantageous to the Government, price and other factors considered.

The following factors shall be used to evaluate quotations:

Factor 1 Price

Quotes must include a proposed price for each Contract Line Item Number (CLIN). The Government will determine prices to be fair and reasonable in accordance with FAR Part 13.106-3 based on, but limited to, market research, current or previous purchases, prices for similar performance in a related industry, and comparison to an independent Government estimate.

Quoters responding to this solicitation are advised that, prior to award, the Government may request quoters to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts.

Factor 2 Technical Capability/Approach

The Government will evaluate the Quoter for acceptability of Technical Capability.

Minimum Requirements:

The following are the minimum requirements a quote must meet to be deemed acceptable for the Technical Capability factor:

1) A quote is deemed acceptable for the Technical Capability factor if it meets all requirements as defined in the solicitation Performance Work Statement (PWS).

2) Technical Capability/Approach evaluations will result in one of the following ratings:

TABLE 1 - TECHNICAL RATINGS

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation.

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation.

A quote must be rated "ACCEPTABLE" for the quote to be eligible for award. An "UNACCEPTABLE" rating for Technical Capability/Approach factor will result in the entire quote being rated "UNACCEPTABLE" overall; an overall rating of "UNACCEPTABLE" makes a quote ineligible for award. A quote must contain sufficient information to enable evaluators to determine acceptability; if there is insufficient information to determine acceptability of the quote, the quote will be rated “UNACCEPTABLE” overall.

QUESTIONS: Any questions in relation to this solicitation shall be submitted to Tracy McDonough email at tracy.l.mcdonough2.civ@us.navy.mil

The cut-off date for questions is 10:00 AM EST on 9 August 2023

(b) The Government shall mail or email a written notice of award to the successful quoter. Upon receipt, the quoter shall either commence performance, or have an authorized representative sign the award and return it to the Contracting Officer; a binding contract is formed upon the earlier of either of those actions.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JUN 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub.

L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

X (8) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

X (9) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (10) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (11) [Reserved]

____ (12) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

____ (13) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (14) [Reserved]

____ (15)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (16)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (17) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)).

____ (18)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2022) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (19) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (20) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (21) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT 2022) (15 U.S.C.

657f).

X (23) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (MAR 2023) (15 U.S.C.

632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (24) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (25) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (27) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

X (28) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

X (29) 52.222-19, Child…