N0016722Q0258_CSS.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with

Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation that

Naval Surface Warfare Center Carderock Division (NSWCCD) intends to issue, and is a Request for Quotes (RFQ) for the following Supplies and/or Services.

NSWCCD has a requirement for a pair of Mercury (BRAND NAME) outboard engines, propellers, controllers and cabling needed for attachment for autonomous operation.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2022-07 effective 8/10/2022 located on https://www.acquisition.gov/?q=browsefar and the Defense Federal Acquisition Regulation

Supplement (DFARS) DPN 20220623 effective 6/23/2022 located at https://www.acq.osd.mil/dpap/dars/change_notices.html SEE ATTACHED SOLICITATION

FOR CLAUSES AND PROVISIONS. The NAICS code is 333618 and the associated PSC code is 2805, and the Small Business Standard is 1,500 for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured. This procurement IS NOT being set-aside for Small Business.

Interested parties may identify their interest to this requirement by submitting a quote no later than the date specified below. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ. All responses shall include price(s), FOB point, and point of contact name & phone number. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

Response to this notice are due on or before 2:00 PM on 07 SEP 2022 at george.a.delmoral3.civ@us.navy.mil.

Point of Contact for this notice is George DelMoral, 757-513-7194, george.a.delmoral3.civ@us.navy.mil.

N0016722Q0258

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each

300XXL SP

FFP

Model 13000032A

Shaft Length 30 inches

Controls –Mechanical to analog voltage

Engine Type: V8 NA 4S

250-300 Horsepower

Low pitch propeller

Integrated options for steering

Ability to control shift/throttle activity

FOB: Destination

PURCHASE REQUEST NUMBER: 1301031543

PSC CD: 2805

NET AMT

0002 1 Each

300CXXL SP

FFP

Model 13000034A

Shaft Length 30 inches

Controls –mechanical to analog voltage

Engine Type: V8 NA 4S

250-300 Horsepower

Low pitch propeller

Integrated options for steering

Ability to control shift/throttle activity

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0003 1 Each V-View 403 Kit

FFP

Model 8M0124498

SmartCraft VesselView Display

Vessel View 403

FOB: Destination

0004 1 Each Lanyrd Swtch - Dual

FFP

Model 19674A12

Lanyard Stop Switch Kit Dual

Surface or Flush mount

Used for Dual Engine installations

Used on Outboards and DTS engines

FOB: Destination

0005 2 Each J-Box 5-way w/Cap

FFP

Model 8M0165557

SmartCraft Junction Box 5 Way w Caps

Stackable

FOB: Destination

0006 1 Each RC4500 Dul OB TRM

FFP

Model 8M0075245

OEM Mercury Dual Engine Binnacle Mount Remote Control

Individual Trim Switches on Control Housing

Mechanical push/pull cable controls

FOB: Destination

0007 2 Each

KIT - HOUS/CVR/BEZL

FFP

Model 879305A01

Bezel for 3 Pos. Key Switch controls

FOB: Destination

0008 1 Each Cable Asy - Link

FFP

Model 893452A01

2 Pin CAN Link Harness

Required for any Twin Engine Installations using SmartCraft Instrumentation

FOB: Destination

0009 1 Each Scconn - UH Dual

FFP

Model 8M0173696

DUAL ENGINE UNDER HELM SMARTCRAFT CONNECT KIT

Deliver VesselView functionality including engine performance data and alerts

FOB: Destination

0010 2 Each Harness Key Switch

FFP

Model 896537K40

14 Pin Non-DTS Key Switch Harness w/ Keyswitch Controls

40’ Length

FOB: Destination

0011 2 Each Harness - 15 ft

FFP

Model 8M0127682

Mercury Marine Mercury Boat DTS Power Harness

15’ Length

FOB: Destination

0012 4 Each Cable T/S G2 40 Ft

FFP

Model 8M0082558

Shift / Throttle mechanical push/pull Cables

Platinum Plus GEN II Cables

40’ Length

FOB: Destination

0013 1 Each Harness Assy

FFP

Model 879969T6

Yellow CAN Cable

For Diagnostic Port on Mercury Engine

SmartCraft Compatible Accessory

6’ Length

FOB: Destination

0014 1 Each Plug Assy - Diag.

FFP

Model 8M0046339

SmartCraft Diagnostic Port

SmartCraft Compatible Accessory

FOB: Destination

0015 1 Each Harness Kit Power

FFP

Model 899785K02

Engine / Helm Rigging Accessories

Accessory Power / Relay Harness Kits

15' Power Harness

3-Pole Terminal Block (40A Fuse)

FOB: Destination

0016 2 Each Rigging Tube Kit

FFP

Model 8M0149598

Engine / Helm Rigging Accessories comes with open Grommets

FOB: Destination

0017 2 Each Hub Kit - HD Prop

FFP

Model 840389K06

Mercury Flo-Torq II steel hub kit for 1-1/4" prop shaft

Prop nut and washer kit

FOB: Destination

0018 1 Each Enertia 11 LH Propeller

FFP

Model 8M0151224

Stainless Steel

Diameter 16”

Pitch 11”

3 blades

Rotation LH

Hub System Flo-Torq II, SSR

FOB: Destination

0019 1 Each Enertia 11 RH Propeller

FFP

Model 8M0151225

Stainless Steel

Diameter 16”

Pitch 11”

3 blades

Rotation RH

Hub System Flo-Torq II, SSR

FOB: Destination

NSN: 28151022522804

MIN SPECIFICATIONS

Minimum Specification Document

Model 13000032A Shaft Length 30 inches Controls –Mechanical to analog voltage Engine Type: V8 NA 4S 250-300 Horsepower Low pitch propeller Integrated options for steering Ability to control shift/throttle activity

Purchase Item Description:

(Please attach any drawing / picture if available)

Name

Description:

Name:

300XXL SeaPro 5.44” 1.75 Quantity: 1

300CXXL SeaPro 5.44” 1.75 Quantity: 1

Enertia 11 LH Propeller Quantity: 1

1 pair of engines and props with controls and harnessing

Model 13000034A

Shaft Length 30 inches Controls –mechanical to analog voltage Engine Type: V8 NA 4S 250-300 Horsepower Low pitch propeller Integrated options for steering Ability to control shift/throttle activity

Model 8M0151224 Stainless Steel Diameter 16”

Pitch 11” 3 blades Rotation LH Hub System Flo-Torq II, SSR Model Name: Enertia

Model 8M0151225 Stainless Steel Diameter 16” Pitch 11” 3 blades Rotation RH Hub System Flo-Torq II, SSR Model Name: Enertia

RC4500-DUL OB TRM Quantity: 1

Model 8M0165557 SmartCraft Junction Box 5 Way w Caps Stackable

Enertia 11 RH Propeller Quantity:

V-VIEW 403 KIT Quantity: 1

LANYARD SWITCH- DUAL Quantity: 1

J-BOX 5-WAY W/CAP Quantity: 2

Model 8M0124498 SmartCraft VesselView Display Vessel View 403

Model 19674A12 Lanyard Stop Switch Kit Dual Surface or Flush mount Used for Dual Engine installations Used on Outboards and DTS engines

Model 879305A01 Bezel for 3 Pos. Key Switch controls

Model 893452A01 2 Pin CAN Link Harness Required for any Twin Engine Installations using SmartCraft Instrumentation

Model 8M0173696

DUAL ENGINE UNDER HELM SMARTCRAFT CONNECT KIT

Deliver VesselView functionality including engine performance data and alerts

Model 896537K40 14 Pin Non-DTS Key Switch Harness w/ Keyswitch Controls 40’ Length

Model 8M0127682 Mercury Marine Mercury Boat DTS Power Harness 15’ Length

KIT - HOUS/CVR/BEZL Quantity: 2

Model 8M0075245 OEM Mercury Dual Engine Binnacle Mount Remote Control Individual Trim Switches on Control Housing Mechanical push/pull cable controls

CABLE ASY-LINK Quantity: 1

SCCONN-UH DUAL Quantity: 1

HARNESS/KEY SWITCH Quantity: 2

HARNESS -15 FT Quantity: 2

CABLE T/S G2 40FT Quantity: 4

Description

Model 8M0082558 Shift / Throttle mechanical push/pull Cables Platinum Plus GEN II Cables

40’ Length

Model 879969T6 Yellow CAN Cable For Diagnostic Port on Mercury Engine SmartCraft Compatible Accessory 6’ Length

Model 8M0046339 SmartCraft Diagnostic Port SmartCraft Compatible Accessory

Model 899785K02 Engine / Helm Rigging Accessories Accessory Power / Relay Harness Kits 15' Power Harness 3-Pole Terminal Block (40A Fuse)

Model 8M0149598 Engine / Helm Rigging Accessories comes with open Grommets

Model 840389K06 Mercury Flo-Torq II steel hub kit for 1-1/4" prop shaft Prop nut and washer kit

HARNESS ASSY Quantity: 1

PLUG ASSY-DIAG. Quantity: 1

HARNESS KIT POWER Quantity: 1

RIGGING TUBE KIT Quantity: 2

HUB KIT-HD PROP Quantity: 2

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 52 wks. ADC 1 NAVAL SEA COMBAT SYSTEM

ENGINEERING STAT

NO CONTACT IDENTIFIED

1052 POCAHONTAS ST, BLDG. V-47

NORFOLK VA 23511-2134

757-462-4517

FOB: Destination

N64281

0002 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0004 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0005 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0006 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0007 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0008 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0009 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0010 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0011 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0012 52 wks. ADC 4 (SAME AS PREVIOUS LOCATION)

0013 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0014 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0015 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0016 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0017 52 wks. ADC 2 (SAME AS PREVIOUS LOCATION)

0018 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0019 52 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

NOV 2021

52.211-15 Defense Priority And Allocation Requirements APR 2008

52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

NOV 2021

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

NOV 2021

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services

-- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2021

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010

252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

SEP 2019

252.215-7013 Supplies and Services Provided by Nontraditional Defense

Contractors.

JAN 2018

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013

252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022

252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Items JAN 2021

252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--

Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-

Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph

(d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The

Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

Any contract awarded as a result of this solicitation will be DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations

System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. [Contracting Officer check appropriate box.]

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

https://www.sam.gov/

(a) The Government intends to award a contract to the responsible quoter who (1) is the Lowest Price Technically

Acceptable quotation, (2) conforms to the solicitation, (3) proposes a price that is fair and reasonable, and (4) will be most advantageous to the Government, price and other factors considered.

The following factors shall be used to evaluate quotations:

Factor 1 Price

Quotes must include a proposed price for each Contract Line Item Number (CLIN). The Government will determine prices to be fair and reasonable in accordance with FAR Part 13.106-3 based on, but not limited to, market research, current or previous purchases, prices for similar performance in a related industry, and comparison to an independent Government estimate.

Quoters responding to this solicitation are advised that, prior to award, the Government may request quoters to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts.

Factor 2 Technical Capability/Approach

The Government will evaluate the Quoter for acceptability of Technical Capability.

Minimum Requirements:

The following are the minimum requirements a quote must meet to be deemed acceptable for the Technical

Capability factor:

1) A quote is deemed acceptable for the Technical Capability factor if it meets all requirements as defined in the solicitation Performance Work Statement (PWS)/Statement of Work (SOW) and/or minimum specifications.

2) Technical Capability/Approach evaluations will result in one of the following ratings:

TABLE 1 - TECHNICAL RATINGS

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation.

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation.

A quote must be rated "ACCEPTABLE" for the quote to be eligible for award. An "UNACCEPTABLE" rating for

Technical Capability/Approach factor will result in the entire quote being rated "UNACCEPTABLE" overall; an overall rating of "UNACCEPTABLE" makes a quote ineligible for award. A quote must contain sufficient information to enable evaluators to determine acceptability; if there is insufficient information to determine acceptability of the quote, the quote will be rated “UNACCEPTABLE” overall.

QUESTIONS: Any questions in relation to this solicitation shall be submitted to George DelMoral, via email at george.a.delmoral3.civ@us.navy.mil

The cut-off date for questions is 11:00 AM ET on 31 AUG 2022.

(b) The Government shall mail or email a written notice of award to the successful quoter. Upon receipt, the quoter shall either commence performance, or have an authorized representative sign the award and return it to the

Contracting Officer; a binding contract is formed upon the earlier of either of those actions.

mailto:george.a.delmoral3.civ@us.navy.mil

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2022) ALTERNATE I (OCT 2014)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision--

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act

(50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13

CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Veteran-owned small business concern" means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least

51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the

United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and

Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part

19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

http://www.sam.gov/

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB

Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each

WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB

Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the

List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)

[The offeror shall check the category in which its ownership falls]:

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana

Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri

Lanka, Bhutan, the Maldives Islands, or Nepal).

___ Individual/concern, other than one of the preceding.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It [ ___ ] has, [ ___ ] has not, participated in a previous contract or subcontract subject to the Equal

Opportunity clause of this solicitation; and

(ii) It [ ___ ] has, [ ___ ] has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that --

(i) It [ ___ ] has developed and has on file, [ ___ ] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts

60-1 and 60-2), or

(ii) It [ ___ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of

Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB

Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy

American – Supplies, is included in this solicitation.)

(1) (i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products.

(iii) The terms "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products:

Line item No. Country of origin

[List as necessary]

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)

(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR

52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)

(i) (A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product.

(B) The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product,"

"Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free

Trade Agreements--Israeli Trade Act."

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than

Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian

End Products) or Israeli End Products:

Line item No. Country of origin

[List as necessary]

(iii) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--

Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the

United States that do not qualify as domestic end products.

Other Foreign End Products:

Line item No. Country of origin

[List as necessary]

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at

FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American—Free Trade Agreements—Israeli Trade Act":

Canadian End Products:

Line item No.

[List as necessary]

(3) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act":

Canadian or Israeli End Products:

Line item No. Country of origin

[List as necessary]

(4) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American—Free Trade Agreements—Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or

Peruvian End Products) or Israeli End Products:

Line item No. Country of origin

[List as necessary]

(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements."

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products

Line item No. Country of origin

[List as necessary]

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding…