SOW Machine Shop MAC IDIQ (1).docx

STATEMENT OF WORK

FOR

MACHINE & COMPOSITE

MANUFACTURING

REQUIREMENTS

Prepared by the Mechanical & Materials Sustainment Branch Airborne Electronic Attack System Division (WXS) NSWC Crane Division Version 1.1 March 10, 2023

Distribution Statement A: Approved for public release: distribution is unlimited.

Statement of Work For Machine & Composite Manufacturing Requirements

1.0 SCOPE

This Statement of Work (SOW) sets forth the Government’s requirements for the build-to-print fabrication of products via processes utilized by Machine & Composite Manufacturing facilities.

1.1 Background

The Airborne Electronic Attack Division (WXS) at Naval Surface Warfare Center, Crane Division (NSWC Crane) supports the Navy’s EA-18G and P-8A aircraft, as well as additional Department of Defense (DoD) platforms/requirements. This SOW cites the Government's requirements for the build-to-print fabrication of manufactured items (e.g. machining, composite lay-ups, fabrication etc.), with these items ultimately assisting WXS in supporting the Navy's EA-18G and P-8A, and other DOD platforms/requirements. Furthermore, additional Electronic Warfare (EW) divisions at NSWC Crane may meet their requirements for manufactured items in accordance with the requirements cited in the SOW, on an as needed basis.

2.0 APPLICABLE DOCUMENTS

The following documents of the revision or issue in effect at the date of award form a part of this SOW for reference.

Furthermore, the documents listed below merely denote the currently known requirements that the contractor shall adhere to in the performance under this SOW. However, additional documents may be cited in the individual delivery orders to be placed against this contract as necessary to further define the requirements (e.g., a more specific SOW, design specifications, product drawings, etc.), and these additional requirements shall have the full force and effect as the documents listed in this SOW .

2.1 Department of Defense Specifications

MIL-PRF-8625F Anodic Coatings for Aluminum and Aluminum Alloys, Revision F, through Amendment 2 (11/23/2020)

MIL-DTL-2036E Enclosures for Electric and Electronic Equipment, Naval Shipboard, Revision E (2/14/2014)

MIL-DTL-5541F Chemical Conversion Coatings on Aluminum And Aluminum Alloys, Revision F (7/11/2006)

MIL-DTL-52471F General Specification for Hose and Hose Assemblies, Rubber, Hydraulic Pressure Type, Revision F & Supplement 1, through Amendment 3 (8/02/2022)

2.2 Department of Defense Standards Guidance and Instruction

MIL-STD-130N Identification Marking of US Military Property, Revision N w/Change 1 (11/16/2012)

MIL-STD-1907 Inspection, Liquid Penetrate and Magnetic Particle, Soundness Requirements for Materials, Parts, and Weldment (9/07/1989)

MIL-STD-1916 DoD Preferred Methods for Acceptance of Product, (4/01/1996)

01-1A-509-1 NAVAIR Technical Manual, Cleaning and Corrosion Control, Volume One - Corrosion Program and Corrosion Theory (3/1/2005)

2.3 Other Government Agency Documents

A-A-59484 Brake Machines, Sheet Metal, Manually Operated Standard and Box-Pan Type (3/14/2001)

2.4 Other Publications

AS 9100D Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations, Revision D (9/20/2016)

AWS-D17 .1 Specification for Fusion Welding for Aerospace Applications, 3rd Edition w/Amendment (12/07/2018)

AWS-D1.1 Structural Welding Code – Steel, 24th edition (12/09/2019)

AWS-D1.2 Structural Welding Code – Aluminum, 6th Edition (6/11/2013)

IATF 16949 Quality Management System Requirements for Automotive Production & Relevant Service Parts Organizations (10/04/2016)

ISO 13485 Quality Management System Requirements for Regulatory Purposes, Medical Devices (3/01/2016)

2.5 Order of Precedence. In the event of a conflict between the text of this SOW and the references cited herein, the text of this SOW takes precedence. Nothing in this document supersedes applicable Federal, State or Local Laws and regulations unless a specific exemption has been obtained.

3.0 PERFORMANCE REQUIREMENTS

3.1 General. The contractor shall provide all facilities, personnel, equipment, materials, parts, supplies, and tools necessary for performance of machined and/or composite requriements under this statement of work. In the performance of the subject tasking under this SOW the contractor shall comply with all the Government's requirements cited in Paragraph 2.

3.2 Fabrication. In the fabrication of products ordered by the Government under this SOW, the contractor shall comply with all the Government's requirements cited in Paragraph 2 as well as any additional requirements (e.g., a more specific SOW, design specifications, product drawings, etc.) necessary to further define the requirements under each individual Delivery Order.

The Contractor shall provide a certificate(s) of material used in the item(s), a test/inspection report, and/or certificates of compliance, when required by the subject delivery order (CDRL A001, A002, A003)

3.3 Place of Performance. Fabrication of all items under this SOW will occur at the contractor's facilities, unless otherwise directed by the Government. If it's determined that fabrication needs to take place at Government facilities to complete a specific Government requirement, the Government shall provide an opportunity for all contractors under this contract to conduct a site visit to the Government facility prior to required submittal date of the Contractor's proposal for the subject delivery order.

3.4 Quality Management. Contractors shall be certified to either AS 9100D, IATF 16949, ISO 13485, or have an equivalent quality management system in place.

4. DATA DELIVERABLES

The Contractor shall provide the following deliverables in accordance with the SOW & CDRL requirements:

Paragraph DID Number

5. GOVERNMENT FURNISHED MATERIAL & GOVERNMENT FURNISHED PROPERTY

5.1 Government Furnished Material (GFM) or Government Furnished Property (GFP) may be required for performance under this contract, on a case-by-case basis. If it is determined that GFM and/or GFP is necessary to perform the requirements, the subject GFM & GFP will be listed in the applicable delivery order.

5.2 If GFM or GFP is provided under a Delivery Order, the Contractor shall generate and submit to the Government a baseline GFP report and a quarterly GFP report until the performance is complete under the subject Delivery Order. (CDRL A004, CDRL A005)

6. SECURITY

6.1 It is not anticipated that the contractor will require access to classified information to perform under this SOW. If any individual requirement under the Delivery Order requires access to classified information; a DD254 will be executed prior to providing any classified data.