24Q0077_SOL_0001_ATT1.pdf
PDF 120 KB Posted
- Solicitation number
- N0016424Q0077
About this file
This request for quote extends solicitation closing and town hall dates for the replacement of two Honda 150HP outboard motors on an existing naval watercraft. Vendors must respond by December 21, 2023 and may request invitation to the December 12 town hall discussion. The Navy seeks a contractor to procure and install equivalent replacement motors serialized as BAPJ-1300729 and BANJ-1304632. In addition to motors, installation of steering components, gauges, cables, batteries and replacement of all worn components is required. The contractor must provide break-in, warranty, and maintenance kits for two cycles. Work will occur at the Lake Glendora Test Facility by January 31, 2024 utilizing on-site facilities and equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 24Q0077_SOL_0001.pdf | ||
| 24Q0077_SOL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
This Request for Quote (RFQ) Closing date is being extended From: 17 Dec 2023 12PM EST
To: 21 Dec 2023 12PM EST All quotation responses to be returned to Ms. Shelby Craig and Ms. Rebecca Helton shelby.j.craig.civ@us.navy.mil rebecca.l.helton4.civ@us.navy.mil Question and Answer (Q&A)
CLIN 0003, Ref P/N – From: P/N 36652-zw7-410 To: 36652-ZW7-310AH
CLIN 0012
From: Qty 2 EA To: Qty 4 EA
Revision to original SOW pertaining to the following clarifications:
Section 2.0 Requirements:
Serialized existing motors now included Maintenance kit for 2 maintenance cycles. Total Quantity 4(ea) – Note, this is Qty 2 for each motor Clarification: Vendor “will replace” all worn, faulty, or leaking fuel lines, gauge cables, and harnesses.
Section 5.0 Special Considerations:
Note: Onsite forklifts and WHE operated by licensed (Crane employees), limited availability due to work scheduling.
Section 8.0 Period of Performance From: 3 months from contract award To: January 31, 2024
Statement of Work For
Lake Glendora Test Facility 24UB1001 Motor Replacement Contract
1.0 Scope
The Crane Division of the Naval Sea Systems Command (NAVSEA) Naval Surface Warfare Center (NSWC Crane) Lake Glendora Test Facility (LGTF) has a requirement for replacement of two (2) Honda 150HP outboard motors to be installed on existing watercraft HULL Number
24UB1001.
This requirement is to establish a contract to acquisition and install the required motors.
This is required to be available no later than January 31, 2024.
2.0 Requirements:
-Vendor will procure and install motors as specified:
Vendor will procure Qty 2 Honda 150HP motors equivalent in specifications to the BF150A motors (replacement motors must be HONDA brand) Existing motors are serialized as follows: BAPJ-1300729 BANJ-1304632
Vendor will remove existing Honda motors, existing motors will be retained by LGTF Vendor will install motors on H.N. 24UB1001
-Vendor will install the following new components: (Ref. CLIN description to include quantities and Part numbers)
Steering components Analog Tachometers Temperature and Oil Pressure lights and/or alarms Hour Meters Fuel gauges and senders Umbilicals Throttle/Shift Cables Batteries Vendor will replace all worn, faulty, or leaking fuel lines, gauge cables, and harnesses.
-Vendor will operate motors through manufacturer recommended break-in period.
-Installed motors will come with a valid manufacturer’s warranty
-Vendor will provide an additional maintenance kit for 2 maintenance cycles to include fuel filters, o-rings, oil, oil filters, lower unit oil, minor impeller kits, and spark plugs for both engines (Total qty 4 kits).
3.0 Government Furnished Property (GFP).
(1) Munson Watercraft H.N. 24UB1001
4.0 Government Furnished Facilities (GFF).
(1) NSWC Crane, Lake Glendora Test Facility
(2) Building 8001 maintenance shop and utilities
5.0
6.0
7.0
8.0
9.0
Special Considerations.
Government personnel will offer a town-hall discussion via Microsoft TEAMS for any vendor interested in clarification questions. Solicitation posting date: 12/7/23. Vendors must request invitation of town-hall discussion on or before 12/12/23 @12:00PM (EST).
Town hall schedule and invitation will then be sent to those vendor(s) requesting to attend. Final closing date of solicitation 12/18/23 @12PM (EST)
Onsite Equipment – On-site forklifts and WHE to be operated by licensed operators are at limited availability due to work scheduling.
Contract and Technical Points of Contact.
Technical Point of Contact:
Doug Martin 812-268-5992 douglas.t.martin.civ@us.navy.mil
Place of Performance
The Primary place of performance shall be:
Lake Glendora Test Facility 2588 East County Road 300N Sullivan, IN 47882
Operating hours at LGTF are 7:00 am - 3:30 pm
Period of Performance
Period of Performance shall end on January 31, 2024
Acceptance
Lake Glendora Test Facility (LGTF) personnel will provide final inspection and acceptance of work. Project completion will be contingent upon operability/ functionality, and will be determined by LGTF personnel.
File details come from the government source that posted it. Updated .