19RWS41_0001_sol.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amenment is to extend the closing date to 7/1/2019; remove Paragraph 3.5 from the SOW thereby eliminating requirement to be AS 9100 Certif ied and to change the Delivery Order maximum to $150,000.00.

1. CONTRACT ID CODE PAGE OF PAGES

1 6

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Jun-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016419RWS41

X 9B. DATED (SEE ITEM 11)

17-May-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Jun-2019

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

D.BALL (812-854-2129) BLDG. 3422

300 HIGHWAY 361

CRANE IN 47522

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016419RWS41

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION 4.0 - CLAUSES & OTHER FULL TEXT INFORMATION

SUMMARY OF CHANGES

SECTION 1.0 - SCHEDULE/INSPECTION & ACCEPTANCE/DELIVERY

The required response date/time has changed from 17-Jun-2019 03:00 PM to 01-Jul-2019 03:00 PM.

The following have been modified:

IDC CONSTRAINTS

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum contract value for all orders issued against this contract shall not be less than the minimum contract value stated in the following table. The maximum contract value for all orders issued against this contract shall not exceed the maximum contract value stated in the following table.

MINIMUM

AMOUNT

MAXIMUM

AMOUNT

$1,500.00 $2,000,000.00

DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE

The minimum order value for each Delivery issued shall not be less than the minimum order value stated in the following table. The maximum order value for each Delivery issued shall not exceed the maximum order value stated in the following table.

MINIMUM

AMOUNT

MAXIMUM

AMOUNT

$1,500.00 $150,000.00

SECTION 4.0 - CLAUSES & OTHER FULL TEXT INFORMATION

The following have been modified:

STATEMENT OF WORK (SOW)

STATEMENT OF WORK

For

METAL TREATMENT REQUIREMENTS

1.0 SCOPE. This Statement of Work (SOW) sets forth the Government's requirements for the metal treatment of products fabricated by WXT Machine Shops.

1.1. BACKGROUND. The Surveillance and Electronic Support Systems Division (WXT) at Naval Surface Warfare Center, Crane Division (NSWC Crane) supports the Navy's EA-68 and EA-18G aircraft, as well as additional Department of Defense (DoD) platforms/requirements. In order to provide adequate support, WXT requires various machined items to receive surface treatments, including, but not limited to, plating, thermal heat treating, corrosion preventative treatments, etc. This SOW cites the Government's requirements for the treatment of machined items, with these machined items ultimately assisting WXT in supporting the Navy's EA-68, EA-18G, and other DoD platforms/ requirements. Furthermore, additional divisions at NSWC Crane may meet their requirements for metals treatment of machined items in accordance with the requirements cited in the SOW, on an as needed basis.

2.0 APPLICABLE DOCUMENTS . The documents cited below form a part of this SOW to the extent specified in the subsequent sections of this SOW. The convention used in this SOW is to reference all appropriate revision letters/numbers and/or date of issue for each document listed below only in this section, while only the applicable document abbreviation will be cited in the remaining sections of the SOW.

Furthermore, the documents listed below merely denote the currently known requirements that the contractor shall adhere to in the performance under this SOW. However, additional documents may be cited in the individual delivery orders to be placed against this contract as necessary to further define the requirements (e.g., a more specific SOW, design specifications, product drawings, etc.), and these additional requirements shall have the full force and effect as the documents listed in this SOW.

2.1 Department of Defense Specifications.

MIL-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys Revision F, Amendment 1 dated (9/15/2003)

MIL-A-8625F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM

ALLOYS

MIL-DTL-81706 Chemical Conversion Materials For Coating Aluminum and Aluminum Alloys, Revision B w/Amendment 1 (5/2/2006)

MIL-DTL-5541 Chemical Conversion Coatings On Aluminum and Aluminum Alloys, Revision F (7/11/2006)

MIL-H-6088 HEAT TREATMENT OF ALUMINUM ALLOYS

MIL-STD-865 SELECTIV E, BRUSH PLATING, ELECTRO-DESPOSITIO

MIL-PRF-32348 POWDER COATING, CAMOUFLAGE CHEMICAL AGENT

RESISTANT SYSTEMS

2.2 Department of Defense Standards. Guidance. and Instruction.

MIL-STD-13D Identification Marking of US Military Property Revision

(12/17/2DD7)

MIL-STD-1D5 Sampling Procedures and Tables for Inspection by Attributes

01-1A-509-1 NAVAIR Technical Manual, Cleaning and Corrosion Control, Volume One - Corrosion Program and Corrosion Theory

(3/1/2DD5)

2.3 Other Government Agency Documents.

A-A-59267 PHOSPHATE COATING COMPOUNDS, MANGANESE OR ZINC

BASE (FOR FERROUS METALS)

2.4 Other Publications.

AS 91DD Quality Management Systems - Requirements for Aviation, Space, and

Defense Organizations, Revision C (Jan 20D9)

SAE-AMS-QQ-P-416 Plating Cadmium (Electrodeposited).

ASTM-A967 Standardization Specification for Chemical Passivation Treatments for Stainless Steel Parts

SAE-AMS-STD-753 STEEL PARTS, CORROSION-RESISTANT: SAMPLING,

INSPECTION AND TESTING FOR SURFACE PASSIVATION SAE-

MS27DD PASSIVATION OF CORROSION RESISTANT STEELS

SAE-AMS2485 COATING, BLACK OXIDE

SAE-AMS277D HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY

PARTS SAE-AMS-H-6875 HEAT TREATMENT OF STEEL RAW

MATERIALS

2.5 Order of Precedence. In the event of a conflict between the text of this SOW and the references cited herein, the text of this SOW takes precedence. Nothing in this document supersedes applicable Federal, State or Local Laws and regulations unless a specific exemption has been obtained.

2.6 Availability of Documents. One source for Government specifications, standards, and handbooks is the Document Automation & Production Service, 700 Robbins Avenue, Building 4/D, Philadelphia, PA 19111-5094 (www.assistdocs.com). Additionally, one source for Non Government Publications is the American National Standards Institute, located at 25"' West 43"' Street, New York, NY 10036 (Telephone: 212-642-4900, www.webstore.ansi.org).

3.0 REQUIREMENTS.

3.1 General. The contractor shall provide all facilities, personnel, equipment, materials, parts, supplies, and tools necessary for performance under this statement of work. In the performance of the subject tasking under this SOW the contractor shall comply with all the Government's requirements cited in Paragraph Two and the individual delivery orders.

3.2 Fabrication. In the surface treatment of products ordered by the Government under this SOW, the contractor shall comply with all the Government's requirements cited in Paragraph Two as well as any additional requirements (e.g., a more specific SOW, design specifications, product drawings, etc.)

necessary to further define the requirements under each individual Delivery Order.

3.3 Place of Performance. Surface treatment of all items under this SOW will occur at the contractor's facilities, unless otherwise directed by the Government. If it's determined that surface treatment needs to take place at Government facilities to complete a specific Government requirement, the Government shall provide an opportunity for all contractors under this contract to conduct a site visit to the Government facility prior to required submittal date of the Contractor's proposal for the subject delivery order. The Government understands that not all Contractors can perform all requirements of this SOW with respect to the types of surface treatments required. Therefore, offers for individual applications will be accepted.

The Contractor location shall be located within 250 miles of NSWC Crane to allow for same day services.

3.4 Performance Timeframe. The period of performance will be defined by the individual delivery order.

On occasion, the Government will require same-day processing. Therefore, the Contractors shall be able to provide "while you wait" services, as defined by the individual delivery order.

4.0 GOVERNMENT FURNISHED EQUIPMENT & PROPERTY.

4.1 Government Furnished Equipment (GFE) or Government Furnished Property (GFP), referred to as parts, will be required for performance under this contract. The specific GFE & GFP necessary to perform the requirements will be listed in the applicable delivery order.

5.0 SECURITY

5.1 It is not anticipated that the contractor will require access to classified information to perform under this SOW. If any individual requirement under the Delivery Order requires access to classified information, DD254s will be executed prior to providing any classified data.

52.216-19 ORDER LIMITATIONS (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $1500.00 (insert dollar figure or quantity), the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor -

(1) Any order for a single item in excess of $150,000.00.

(2) Any order for a combination of items in excess of $150,000.00 ; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in paragraph (b) (1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 7 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

(End of Summary of Changes)