17Q0017_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amend to open as competitive and small business set-aside.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 6

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-May-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016417Q0017

X 9B. DATED (SEE ITEM 11)

25-Apr-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-May-2017

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

K. KAPANZHI (812-854-4045)

BLDG 3373

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016417Q0017

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION SF30 - SF 30 CONTINUATION SHEET

SUMMARY OF CHANGES

SECTION SAP - SAP CONTINUATION SHEET

The set aside percentage 100.00% has been added.

The required response date/time has changed from 02-May-2017 04:00 PM to 18-May-2017 04:00 PM.

The Acquisition Set Aside has changed from No Preference / Not Listed to Small Business.

CLIN 0001

The CLIN extended description has changed from:

P/N 100-2000, VarioMetric, NIR Spectrometer with 1260 to 1360 nm bandwidth, USB Camera with LED ring illuminator, Microscope Stand, Optics and Manual XY stage, Micro Desktop Computer, HD Monitor with preloaded thickness analysis software, payment terms Net 30, shipping terms FOB Destination

To:

NIR Spectrometer with 1260 to 1360 nm bandwidth, USB Camera with LED ring illuminator, Microscope Stand, Optics and Manual XY stage, Micro Desktop Computer, HD Monitor with preloaded thickness analysis software, payment terms Net 30, shipping terms FOB Destination. Performance in accordance with included specifications and Statement of Work.

CLIN 0002

P/N 100-2004, VarioMetric, USB NIR Camera with Dual LED Coaxial Illumination

USB NIR Camera with Dual LED Coaxial Illumination

CLIN 0003

P/N 100-2005, Fine adjustment Focus Block and XY stage, 10X Objective Lens, NIR, 0.2NA

Fine adjustment Focus Block and XY stage, 10X Objective Lens, NIR, 0.2NA

CLIN 0004

P/N 100-2006, VarioMetric, Specialized range 500 to 1000 nm Spectrometer, stabilized halogen fiber light source, optics combined for NIR

Specialized range 500 to 1000 nm Spectrometer, stabilized halogen fiber light source, optics combined for NIR

The below Table of Contents has been added

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

The following have been added by reference:

52.219-6 252.213-7000

The following have been added by full text:

SOW

STATEMENT OF WORK:

SILICON THICKNESS MEASUREMENT TOOL

1.0 Scope

1.1 Background.

This statement of work describes the requirements of code GXMS with regard to the installation, test, training and shipping by the Contractor of the Silicon Thickness Measurement System.

2.0 Terms.

2.1 Trade-in Discount.

N/A

3.0 Task Requirements.

3.1 Installation and test.

The Contractor shall furnish a complete Silicon Thickness Measurement Tool with upgrades as quoted.

The Contractor shall provide a qualified service person for the installation and testing of the equipment defined in section 4.0, Contractor Furnished Equipment. Contractor shall demonstrate that the instrument meets all requirements of the procurement specifications and all of the manufacturer's published specifications.

3.2 Warranty.

The Contractor shall provide a standard parts and labor warranty for at least one year after installation.

3.3 Maintenance after Warranty.

N/A

3.4 Training.

The Contractor shall provide a technical specialist to conduct training on the use of the system.

3.5 Shipping.

The Contractor shall provide shipping of the Silicon Thickness Measurement Tool and any additional items required for installation to NSWC Crane.

4.0 Government Furnished Facilities

The Government shall provide the Contractor access to the equipment specified in 1.0 in order for the completion of tasks outlined in 3.0

5.0 Special Considerations

5.1 Security.

The Contractor shall comply with the security regulations of NSWC. The Contractor shall provide the name, address, and nationality of any employee sent to NSWC Crane. (Non-US personnel will require additional time for processing a visitor pass. The Contractor shall inform the Government as early as possible if a non-US citizen will visiting the base.) The Contractor shall provide any other information which may be requested by the security department for issuance of a gate pass. All persons engaged in work on the center shall be subject to search of the person and vehicle by the Government at any time while at NSWC Crane.

6.0 Place and Period of Performance

Code GXMS personnel will schedule the installation and training visits after items are received. The initial installation and training shall be scheduled so that it takes place within 45 days from the date all equipment and data are accepted by the Government.

SPECIFICATIONS

Silicon Thickness Measurement Tool Specifications The purpose of this procurement is to obtain a Silicon Thickness Measurement Tool capable of accurately measuring highly doped silicon System shall include:

1. Silicon Thickness Measurement Tool

a. 1260-1360nm NIR Spectrometer

b. 500-1000nm spectrometer

c. USB Camera

d. USB NIR Camera

e. Dual LED ring & coaxial illumination

f. Operation Manual

2. Desktop Computer:

a. OS: Windows 10 64 bit

b. 24” HD Monitor

c. DVD/CD disc drive

d. 1TB HDD

e. Thickness Analysis Software

f. TPM 2.0 security module

3. Microscope

a. Microscope Stand

b. Microscope Optics for combined NIR, VIS Measurements

c. 10X Objective

d. Fine Adjustment Block

e. Precision XY Stage

f. Stabilized tungsten halogen fiber coupled light source

4. Training

System training shall be provided onsite by the manufacturer upon completion of installation.

5. Warranty The system shall be covered by the manufacturer's standard warranty

SECTION SAP PROV - SAP PROVISIONS

The following have been added by full text:

CNIN-SAP-022 EVALUATION CRITERIA (MAY 2005)

Selection for award will be based on the following factors in descending order of importance:

EVALUATION FACTORS

Price Technical Approach Quality Delivery Past Performance

Quotes that are non-compliant with any material requirement of this solicitation may be rejected without further consideration for award. This will be a firm fixed price contract and will be awarded utilizing Simplified Acquisition Procedures.

The following have been deleted:

CNIN-SAP-023

(End of Summary of Changes)