7.02_Award_N00104-27-P-X140_Final.pdf

PDF 184 KB Posted

Attached to
ELECTRON TUBE
Solicitation number
N0010427PX140
Issued by

About this file

This is a DD Form 1155 (Order for Supplies or Services) issued by the Naval Supply Systems Command Weapon Systems Support Mechanicsburg for the repair of four electron tubes under a Foreign Military Sales (FMS) requirement.

The contract, N0010427PX140, is a firm-fixed-price purchase order totaling USD 208,904.00, with four separately identified line items (0001AA, 0001AB, 0001AC, 0001AD), each priced at USD 52,226.00 for one electron tube repair. The contractor is CPI Electron Device Business, Inc. (CAGE Code 88236), located in Beverly, Massachusetts. The requisition number is N0010426PR26342, with a DPAS priority rating of DO-A3. All four electron tubes are National Stock Number 5960014872175, part number 6155764, for the AEGIS-Ancillary Systems weapon system. The delivery schedule requires completion within 345 calendar days from the award receipt date, with delivery to SEAMODAL Transport Corporation in Hayward, California under F.O.B. Origin shipping terms. Payment will be made by DFAS Columbus at DoDAAC HQ0339 within Net 30 days. Inspection and acceptance occur at the contractor's facility in Beverly, Massachusetts by DCMA Northeast, with the Quality Assurance Representative Stephen Rezack providing oversight. The contract specifies government source inspection, packaging and marking in accordance with best standard commercial practices for overseas shipment, and requires the contractor to perform all repair work per the original manufacturer's specifications and drawings. No transportation charges are to be incurred against the contract, and accelerated delivery is encouraged at no additional cost.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

14. SHIP TO

ORDER FOR SUPPLIES OR SERVICES

PAGE 1 OF

1. CONTRACT/PURCH ORDER/AGREEMENT NO. 2. DELIVERY ORDER/CALL NO. 3. DATE OF ORDER/CALL

(YYYYMMMDD)

4. REQUISITION/PURCH REQUEST NO. 5. PRIORITY

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than 6) CODE 8. DELIVERY FOB

DESTINATION

OTHER

(See Schedule if other)

10. DELIVER TO FOB POINT BY (Date)

(YYYYMMMDD)

12. DISCOUNT TERMS

13. MAIL INVOICES TO THE ADDRESS IN BLOCK

11. X IF BUSINESS IS

SMALL

SMALL DISAD-

VANTAGED

WOMEN-OWNED

CODE 15. PAYMENT WILL BE MADE BY CODE MARK ALL

PACKAGES AND

PAPERS WITH

IDENTIFICATION

NUMBERS IN

BLOCKS 1 AND 2.

16.

TYPE

OF

ORDER

DELIVERY/

CALL

PURCHASE

This delivery order/call is issued on another Government agency or in accordance with and subject to terms and conditions of above numbered contract.

Reference your furnish the following on terms specified herein.

ACCEPTANCE. THE CONTRACTOR HEREBY ACCEPTS THE OFFER REPRESENTED BY THE NUMBERED PURCHASE ORDER AS IT MAY PREVIOUSLY HAVE BEEN OR IS NOW MODIFIED, SUBJECT TO ALL OF THE TERMS AND CONDITIONS SET FORTH, AND AGREES TO PERFORM THE SAME.

If this box is marked, supplier must sign Acceptance and return the following number of copies:

NAME OF CONTRACTOR SIGNATURE TYPED NAME AND TITLE DATE SIGNED

(YYYYMMMDD)

17. ACCOUNTING AND APPROPRIATION DATA/LOCAL USE

18. ITEM NO. 19. SCHEDULE OF SUPPLIES/SERVICES

20. QUANTITY

ORDERED/

ACCEPTED*

21.

UNIT

22. UNIT PRICE 23. AMOUNT

*If quantity accepted by the Government is same as quantity ordered, indicate by X.

If different, enter actual quantity accepted below quantity ordered and encircle.

24. UNITED STATES OF AMERICA 25. TOTAL

26.

DIFFERENCES

30. INITIALS

27a. QUANTITY IN COLUMN 20 HAS BEEN

INSPECTED RECEIVED ACCEPTED, AND CONFORMS TO

THE CONTRACT EXCEPT AS NOTED:

c. DATE

(YYYYMMMDD)

b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

28. SHIP. NO.

PARTIAL

FINAL

31. PAYMENT

COMPLETE

PARTIAL

FINAL

29. D.O. VOUCHER NO.

32. PAID BY 33. AMOUNT VERIFIED CORRECT FOR

34. CHECK NUMBER

35. BILL OF LADING NO.

42. S/R VOUCHER NO.

36. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT.

a. DATE

(YYYYMMMDD)

b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

37. RECEIVED

AT

38. RECEIVED BY (Print) 39. DATE RECEIVED

(YYYYMMMDD)

40. TOTAL CON-

TAINERS

41. S/R ACCOUNT NUMBER

DD FORM 1155, DEC 2001 PREVIOUS EDITION IS OBSOLETE.

CONTRACTING/ORDERING OFFICER

9. CONTRACTOR CODE FACILITY

NAME

AND

ADDRESS

BY:

d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

f. TELEPHONE NUMBER g. E-MAIL ADDRESS

FMS Requirement

Section A - Solicitation/Contract Form

ELECTRON TUBE_FMS REPAIR

North American Industry Classification System (NAICS): 334419

Award Notes:

***Accelerated delivery is encouraged and accepted before the delivery date(s) listed in the schedule, at no additional cost to the Government. Partial delivery quantities (where applicable) are authorized on this contract, as completed and found acceptable by the Government. ***

IAW Financial Management Regulation (FMR) (DOD 70014.R Vol. 15), the Defense Transportation Regulation (DTR) 4500.9-R, and the Security Assistance Management Manual (SAMM), a Transportation Account Code is not required for government shipment. The DCMA traffic manager in accordance with DCMA-INST 319 will coordinate with the freight forwarder(s) to provide a pre-paid/collect shipping label(s) or make arrangements for pickup of the material from the contractor by the freight forwarder.

NO FAST PAY.

DO NOT INDUCT INTO CAV.

GOVERNMENT SOURCE INSPECTION IS REQUIRED.

PACKAGING AND MARKING SHALL BE IN ACCORDANCE WITH BEST STANDARD COMMERCIAL

PACKAGING FOR OVERSEAS SHIPMENT.

DFARS 252.211-7003 (Item Unique Identification and Valuation) is included due to a system limitation.

However, Item Unique Identification and Valuation DOES NOT APPLY to FMS requirements where the parts are wholly owned by the FMS customer countries, are not covered by a Cooperative Logistics Supply Support Arrangement (CLSSA), and where the same asset will be repaired and returned to the FMS customer for their sole utilization.

Class Deviation No. 26-CL-901, valid through 30 June 2036.

BEYOND ECONOMICAL OR PHYSICAL REPAIR:

If the contractor finds an item to be either beyond economical repair (BER) or beyond repair (BR), the contractor shall notify the Defense Contract Management Agency (DCMA) Quality Assurance Representative (QAR) for verification of the item's condition. The QAR will provide their assessment of the item's condition along with any other pertinent information to the DCMA Administrative Contracting Officer (ACO). The ACO and/or contractor will route the information to the Naval Supply System Command (NAVSUP) Weapon Systems Support (WSS) Procurement Contracting Officer (PCO). The contractor shall not scrap or cannibalize any item(s) until the NAVSUP WSS PCO provides written authorization.

SHIPMENT:

No transportation charges should be incurred against this contract.

The contractor is required to ship by traceable means and note the requisition number from Block 4 of the contract on all shipping documents.

Contractor should submit a Shipping Instructions Request (SIR) to the DCMA Transportation Officer (TO) via the SIR application to receive shipment instructions. The DCMA TO will review the SIR, determine the necessary shipping methods and documents and provide that information to the contractor. Access to DCMA eTools is required to submit the SIR. Visit DCMA's website for more information and support points of contact:

https://www.dcma.mil/WBT/sir/.

N0010427PX140

Military Assistance Program Address Codes (MAPAC) SHIP TO and MARK FOR codes are being provided and not the full address information. Prior to shipment of material, please consult the DAASINQ website below to obtain the complete SHIP TO and MARK FOR address information. To locate the complete SHIP TO address, click on the MAPAC link on the left hand side of the page. After entering the appropriate SHIP TO code in the MAPAC query, the complete address may be found under TAC 2. To locate the complete MARK FOR address, enter the MARK FOR code in the MAPAC query. DAASINQ Website: https://home.daas.dla.mil /daasinq/default.asp.

Send a notification of shipment to both the PCO and NAVSUP WSS Repair Manager listed below:

Corey Livelsberger Tel: 717-605-1329 Email: corey.a.livelsberger.civ@us.navy.mil

**Notice to DCMA: For F.O.B. origin contracts issued by NAVSUP WSS where the Transportation Account Code (TAC) is not specified in the order or is no longer valid, utilize the NAVSUP WSS document provided to DCMA for the applicable fiscal year titled, 'TRANSPORTATION ACCOUNT CODES FOR PROCUREMENTS ISSUED BY NAVSUP WEAPON SYSTEMS SUPPORT (WSS)' to retrieve the correct

TAC.

A FIRM-FIXED-PRICE applies to this order and the Contractor agrees to deliver by the contract delivery date (CDD) listed in the schedule. The CDD is firm and enforceable.

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

FMS Case NU: JA-P-P-RJU Quantity: 4

NSN: 5960013228417

P/N: 6155764 Nomen: ELECTRON TUBE

0001AA

SAME AS ITEM 0001

ACR: AA

REQ: PJAEE453503534

SERIAL #: 935136 1347

SUPPAD: PA9RKB

SHIP TO: PJA009

MARK FOR: PJAE00

CASE: JA-P-RKB PROJ: TP: 3

National Stock Number: 5960014872175 Product Service Code: 5960 CLIN only - Foreign Military Sales Case Number: JA-P-RKB Pricing Arrangement: Firm Fixed Price

CIN: N0010426PR263420001

ACRN: AA

PR Number: N0010426PR26342 PR Line Item Number: 0000

1 Each

USD 52,226.00

Firm Price

USD 52,226.00

Funded Amount

USD 52,226.00

0001AB

SAME AS ITEM 0001

ACR: AA

REQ: PJAEE453503535

SERIAL #: 950362/0352

SUPPAD: PA9RKB

SHIP TO: PJA009

MARK FOR: PJAE00

CASE: JA-P-RKB PROJ: TP: 3

National Stock Number: 5960014872175 Product Service Code: 5960 CLIN only - Foreign Military Sales Case Number: JA-P-RKB Pricing Arrangement: Firm Fixed Price

CIN: N0010426PR263420001

ACRN: AA

PR Number: N0010426PR26342 PR Line Item Number: 0000

1 Each

USD 52,226.00

Firm Price

USD 52,226.00

Funded Amount

USD 52,226.00

0001AC

SAME AS ITEM 0001

ACR: AA

REQ: PJAEE453503536

SERIAL #: 935133 1343

SUPPAD: PA9RKB

SHIP TO: PJA009

MARK FOR: PJAE00

CASE: JA-P-RKB PROJ: TP: 3

National Stock Number: 5960014872175 Product Service Code: 5960 CLIN only - Foreign Military Sales Case Number: JA-P-RKB

1 Each

USD 52,226.00

Firm Price

USD 52,226.00

Pricing Arrangement: Firm Fixed Price

CIN: N0010426PR263420001

ACRN: AA

PR Number: N0010426PR26342 PR Line Item Number: 0000

Funded Amount

USD 52,226.00

0001AD

SAME AS ITEM 0001

ACR: AA

REQ: PJAEE453503537

SERIAL #: 950372/0408

SUPPAD: PA9RKB

SHIP TO: PJA009

MARK FOR: PJAE00

CASE: JA-P-RKB PROJ: TP: 3

National Stock Number: 5960014872175 Product Service Code: 5960 CLIN only - Foreign Military Sales Case Number: JA-P-RKB Pricing Arrangement: Firm Fixed Price

CIN: N0010426PR263420001

ACRN: AA

PR Number: N0010426PR26342 PR Line Item Number: 0000

1 Each

USD 52,226.00

Firm Price

USD 52,226.00

Funded Amount

USD 52,226.00

Additional Regulation or Supplemental Clauses Incorporated by Full Text

WSSTERMBA00 CONTACT INFORMATION (Jan 2021)

When a DCMA office is shown on a Contract/Purchase Order, the Administrative Contracting Officer (ACO) is the primary point of contact and all inquiries shall initially be directed to that office for necessary action.

Inquiries and correspondence directed to the Post Award PCO should be addressed as follows:

Code N774.5 Weapon System LRC: AE9

Telephone: 771-229-0594

E-Mail: yenstephanie.tran@navy.mil

In the event that the listed PCO contact information is no longer valid and a follow-on PCO cannot be identified, contact itimp.wss.

fct@navy.mil.

N0010427PX140

mailto:itimp.wss.fct@navy.mil mailto:itimp.wss.fct@navy.mil

Section C - Description/Specifications/Statement of Work

CLIN: 0001

NIIN: 013228417

ITEM NAME: ELECTRON TUBE

1. SCOPE

1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the

.ELECTRON TUBE

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The repaired under this contract/purchase order shall meet ELECTRON TUBE the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractor's repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures.

88236

3.2 Marking - PACKAGING AND MARKING SHALL BE IN ACCORDANCE WITH BEST STANDARD

COMMERCIAL PACKAGING FOR OVERSEAS SHIPMENT.

3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVSUP-WSS- MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVSUP-WSS-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old.

Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable.

Requirements

N0010426PR26342

FMS Case NU: JA-P-P-RKB

Requisition Quantity: 4

NSN: 5960014872175

P/N: 6155764 Nomen: ELECTRON TUBE

LOA: 97-11X8242.2862/000/74622/0/065916/2D/PJASE4/52263027/0RKB

Weapon System: AEGIS-ANCILLARY SYSTEMS

Section D - Packaging and Marking

NIIN: 013228417

ITEM NAME: ELECTRON TUBE

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

Marking - PACKAGING AND MARKING SHALL BE IN ACCORDANCE WITH BEST STANDARD COMMERCIAL

PACKAGING FOR OVERSEAS SHIPMENT.

Section E - Inspection and Acceptance

NIIN: 013228417

ITEM NAME: ELECTRON TUBE

4. QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material.

4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies.

4.4 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings.

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-2 Inspection of Supplies-Fixed-Price. Aug 1996 52.246-16 Responsibility for Supplies. Apr 1984

Additional Regulation or Supplemental Clauses Incorporated by Full Text

WSSTERMEZ05 INSPECTION AND ACCEPTANCE (Apr 2015)

(x) 1. Inspection of Supplies shall be performed at the contractor location shown on Page One by the Contract Administration Office (CAO) also shown on Page One, unless otherwise specified below:

( ) Manufacturing Site at ( ) by the Manufacturing Site CAO ( ) ( ) Subcontractor's Sites at ( ) by the Subcontractor Site CAO ( ).

( ) Packaging Site at ( ) by the Packaging Site CAO ( ).

(x) 2. Final Acceptance of Supplies and Packaging shall be performed at the contractor's location on Page One by the Contract Administration Office (CAO) also shown on Page One, unless otherwise specified below:

( ) Manufacturing Site at ( ) by the Manufacturing Site CAO ( ).

( ) Subcontractor's Site at ( ) by the Subcontractor Site CAO ( ).

( ) Packaging Site at ( ) by the Packaging Site CAO ( ).

( ) Destination.

( ) 3. Inspection and Acceptance of Supplies will be performed by the consignee at Destination.

Overall Contract Inspection/Acceptance Locations

0001AA

Inspection and Acceptance Location

Both Source Instructions: There are no other instructions.

DoDAAC: S2206A CountryCode: USA

DCMA NORTHEAST

BUILDING 1108, HANSCOM AFB MA 01731

HANSCOM AFB, MA 01731

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.mil Telephone: 617-794-3635

0001AB

Inspection and Acceptance Location

Both Source Instructions: There are no other instructions.

DoDAAC: S2206A CountryCode: USA

DCMA NORTHEAST

BUILDING 1108, HANSCOM AFB MA 01731

HANSCOM AFB, MA 01731

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.mil Telephone: 617-794-3635

0001AC

Inspection and Acceptance Location

Both Source Instructions: There are no other instructions.

DoDAAC: S2206A CountryCode: USA

DCMA NORTHEAST

BUILDING 1108, HANSCOM AFB MA 01731

HANSCOM AFB, MA 01731

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.mil Telephone: 617-794-3635

0001AD

Inspection and Acceptance Location

Both Source Instructions: There are no other instructions.

DoDAAC: S2206A CountryCode: USA

DCMA NORTHEAST

BUILDING 1108, HANSCOM AFB MA 01731

HANSCOM AFB, MA 01731

UNITED STATES

Stephen Rezack, QAR

Email: stephen.j.rezack2.civ@mail.mil Telephone: 617-794-3635

Section F - Deliveries or Performance

From date of lead time event to date of latest delivery 345 Calendar Days Date of Award Receipt

Government Origin (Shipping Point)

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

FoB Details Government Origin (Shipping Point)

0001AA

Delivery Schedule From date of lead time event to date of latest delivery 345 Calendar Days Date of Award Receipt

1 Each Ship To

MAPAC: PJA009

CountryCode: USA

SEAMODAL TRANSPORT

CORPORATION

3540 ARDEN ROAD,

HAYWARD, CA 94545

HAYWARD, CA 94545

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.

mil Telephone: 617-794-3635

FoB Details Government Origin (Shipping Point)

0001AB

Delivery Schedule From date of lead time event to date of latest delivery 345 Calendar Days Date of Award Receipt

1 Each Ship To

MAPAC: PJA009

CountryCode: USA

SEAMODAL TRANSPORT

CORPORATION

3540 ARDEN ROAD,

HAYWARD, CA 94545

HAYWARD, CA 94545

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.

mil Telephone: 617-794-3635

FoB Details Government Origin (Shipping Point)

0001AC

Delivery Schedule From date of lead time event to date of latest delivery 345 Calendar Days Date of Award Receipt

1 Each Ship To

MAPAC: PJA009

CountryCode: USA

SEAMODAL TRANSPORT

CORPORATION

3540 ARDEN ROAD,

HAYWARD, CA 94545

HAYWARD, CA 94545

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.

mil Telephone: 617-794-3635

FoB Details Government Origin (Shipping Point)

0001AD

Delivery Schedule From date of lead time event to date of latest delivery 345 Calendar Days Date of Award Receipt

1 Each Ship To

MAPAC: PJA009

CountryCode: USA

SEAMODAL TRANSPORT

CORPORATION

3540 ARDEN ROAD,

HAYWARD, CA 94545

HAYWARD, CA 94545

UNITED STATES

Stephen Rezack, QAR Email: stephen.j.rezack2.civ@mail.

mil Telephone: 617-794-3635

FoB Details Government Origin (Shipping Point)

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-17 Government Delay of Work. Apr 1984 52.247-29 F.o.b. Origin. Feb 2006

Section G - Contract Administration Data

ACRN LOA Total Amount

AA

97-11X8242.2862/000/74622/0/065916/2D/PJASE4/52263027/0RKB

USD

208,904.00

Line Item PR/MIPR - PR Line Item#

CIN Amount

SLIN (Separately Identified)

0001AA

N0010426PR26342 -

N0010426PR2634200

USD

52,226.00

SLIN (Separately Identified)

0001AB

N0010426PR26342 -

N0010426PR2634200

USD

52,226.00

SLIN (Separately Identified)

0001AC

N0010426PR26342 -

N0010426PR2634200

USD

52,226.00

SLIN (Separately Identified)

0001AD

N0010426PR26342 -

N0010426PR2634200

USD

52,226.00

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Tailored) (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

INVOICE AND RECEIVING REPORT (COMBO)

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0339

Issue By DoDAAC N00104

Admin DoDAAC S2206A

Inspect By DoDAAC S2206A

Ship To Code SEE SCHEDULE

Ship From Code 88236

Mark For Code SEE SCHEDULE

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) S2206A

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026- O0038)

Feb 2026

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.211-5 Material Requirements. (Deviation 2026-O0038) Feb 2026

52.213-4 Terms and Conditions-Simplified Acquisitions (Noncommercial). (Deviation 2026- O0038)

Feb 2026

52.215-8 Order of Precedence-Uniform Contract Format. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-20 Contracts for Materials, Supplies, Articles, and Equipment. (Deviation 2026-O0038) Feb 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1)

Apr 2026

52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-1 Payments. Apr 1984 52.232-8 Discounts for Prompt Payment. Feb 2002 52.232-11 Extras. Apr 1984 52.232-23 Assignment of Claims. May 2014 52.232-25 Prompt Payment. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. (Deviation 2026-O0038) Feb 2026 52.233-1 Disputes. (Deviation 2026-O0038) (Alternate I) Feb 2026 Alternate I Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026-O0038) Feb 2026 52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

52.245-1 Government Property. Sep 2021 52.245-9 Use and Charges. Apr 2012 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form). Apr 1984 52.253-1 Computer Generated Forms. (Deviation 2026-O0038) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7000 Disclosure of Information. Oct 2016 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

(DEVIATION 2026-O0025)

May 2024 Deviation 2026-O0025 Jun 2026

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.217-7028 Over and Above Work. Dec 1991 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7013 Duty-Free Entry. Aug 2025 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. Jan 2023 252.225-7028 Exclusionary Policies and Practices of Foreign Governments. Apr 2003 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.232-7010 Levies on Contract Payments. Dec 2006

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.243-7001 Pricing of Contract Modifications. Dec 1991 252.244-7998 Contractor Purchasing System Administration. (DEVIATION 2026-O0015) Feb 2026 Deviation 2026-O0015 Feb 2026

252.244-7999 Subcontracts for Commercial Products or Commercial Services.

(DEVIATION 2026-O0015)

Feb 2026 Deviation 2026-O0015 Feb 2026

252.245-7003 Contractor Property Management System Administration Jan 2025 252.245-7005 Management and Reporting of Government Property. Jan 2024 252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. Jan 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-O0038) (Feb 2026)

POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (FEB 2026) (DEVIATION 2026-O0038)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, Affiliates or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number.____ ____

(2) [ .] The Contractor represents Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause that it is, is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Contractor represents that it is, is not a Women-owned small business (WOSB) joint venture eligible under the WOSB Program joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity ____ identifier of each party to the joint venture: __.]

(4) . The Contractor represents that it is, is not a joint Economically disadvantaged women-owned small business (EDWOSB) joint venture venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __ .]

(5) . The Contractor represents that it Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) [ ] The HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a HUBZone small business concern.

offeror represents, as part of its offer, that It is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business ____ concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized ____ signer's name and title.]

(End of clause)

52.223-11 Ozone-Depleting Substances. (Deviation 2026-O0038) (Feb 2026)

OZONE-DEPLETING SUBSTANCES (FEB 2026) (DEVIATION 2026-O0038)

(a) . As used in this clause-Definition

Ozone-depleting substance means any substance the Environmental Protection Agency designates in 40 CFR part 82 as-

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) Requirement. In accordance with 40 CFR 82.84(a)(5), the Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

Warning: Contains (or manufactured with, if applicable) * , a substance(s) which harm(s) public health and environment by destroying ozone ____ in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

____ [Insert one or more Internet addresses]____ ____

(End of clause)

52.252-4 Alterations in Contract. (Apr 1984)

ALTERATIONS IN CONTRACT (APR 1984)

Portions of this contract are altered as follows:

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any [insert regulation name] (48 CFR ) clause with an authorized deviation is indicated by ____ ____ the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .