Solicitation - N0010425RK045.pdf

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 7900)

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXTENSION

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS(%)

DATEAMENDMENT NO.AMENDMENT NO. DATE

15A. NAME AND

ADDRESS

OF OFFER-

OR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXTENSION

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION:

10 U.S.C. 2304 (c) ( )41 U.S.C. 3304(a)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV. 6/2014)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

SEALED BID (IFB)

NEGOTIATED (RFP)

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

N0010425RK045

Section A - Solicitation/Contract Form

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

NSN: 1377-01-423-2502

SQ03

CCU-133/A, Impact Initiator P/N: 6094100-101-02)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

0001AA

TECHNICAL DATA - See DD Form 1423, Exhibit A

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-2502

1 Set

0001AB

PRODUCTION LOT TEST SAMPLES

Consists of: 1 Lots of 36 each net, plus an additional 10 each per lot for test. (8 each for test and 2 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-2502

8 Each

0001AC

INVESTIGATIVE UNIT(S)

Consists of: 1 Lots of 36 each net, plus an additional 10 each per lot for test. (8 each for test and 2 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-2502

2 Each

0001AD

NSN 1377-01-423-2502

DODIC: SQ03

Model: CCU-133/A Item Nomenclature: Impact Initiator P/N: Chemring P/N 6094100-101-02

FMS: KU-P-PAK/ 25P03KU 033

Ownership Code 8

NOTE: The requirements in DFARS 252.211-7003, Item

36 Each

Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-2502

NSN: 1377-01-423-1008

SQ04

BBU-58/A, Front Mount Initiator P/N: 6092100

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

0002AA

TECHNICAL DATA - See DD Form 1423, Exhibit A

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-1008

1 Set

0002AB

PRODUCTION LOT TEST SAMPLES

Consists of: 1 Lots of 37 each net, plus an additional 10 each per lot for test. (8 each for test and 2 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-1008

8 Each

0002AC

INVESTIGATIVE UNIT(S)

Consists of: 1 Lots of 37 each net, plus an additional 10 each per lot for test. (8 each for test and 2 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-1008

2 Each

0002AD

NSN 1377-01-423-1008

DODIC: SQ04

Model: BBU-58/A Item Nomenclature: Front Mount Initiator P/N: Chemring P/N 6092100

FMS: KU-P-PAK/ 25P03KU 034

Ownership Code 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

36 Each

National Stock Number: 1377-01-423-1008

0002AE

NSN 1377-01-423-1008

DODIC: SQ04

Model: BBU-58/A Item Nomenclature: Front Mount Initiator P/N: Chemring P/N 6092100

FMS: SZ-P-PAI/ 25P16SZ 012

Ownership Code 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-423-1008

1 Each

NSN: 1377-01-439-0910

SR94

CCU-132/A, Impulse Cartridge P/N: 6028110-01

DWG: 850AS895

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

0003AA

TECHNICAL DATA - See DD Form 1423, Exhibit A

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-439-0910

1 Set

0003AB

PRODUCTION LOT TEST SAMPLES

Consists of: 1 Lots of 45 each net, plus an additional 12 each per lot for test. (9 each for test and 3 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-439-0910

9 Each

0003AC

INVESTIGATIVE UNIT(S)

Consists of: 1 Lots of 45 each net, plus an additional 12 each per lot for test. (9 each for test and 3 each for investigative purposes.)

Ownership Code 3

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-439-0910

45 Each

0003AD

DODIC: SR94

Model: CCU-132/A Item Nomenclature: Impulse Cartridge P/N: Chemring P/N 6028110-01

FMS: SZ-P-PAI/ 25P16SZ 016

Ownership Code 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

National Stock Number: 1377-01-439-0910

45 Each

Section C - Description/Specifications/Statement of Work

SECTION C - DESCRIPTION AND SPECIFICATIONS

NOTE 1: NON-ANTICIPATION OF INITIAL DEVIATIONS ON AWARDS

Offerors are reminded that any resultant contract will require performance in strict compliance with the specifications set forth therein, and that prices offered should not be predicated upon Contractor anticipation of Government authorization of deviations, even though such deviations may have been granted previously under other contracts for the same item.

NOTE 2: SPECIFICATIONS THAT DO NOT INDICATE SPECIFIC REVISION LEVELS ARE TO BE MADE TO THE REVISION LEVELS LISTED ON THE DEPARTMENT OF DEFENSE INDEX OF SPECIFICATION AND STANDARDS IN EFFECT AT THE

TIME OF SOLICITATION ISSUANCE.

1. DATA LIST / PART NUMBERS / DRAWING NUMBERS:

CLIN DATA LIST / PART OR DRAWING NUMBERS REVISION

REVISION

DATE

0001 Chemring P/N 6094100-101-02 P 10/13/2015

0002 Chemring P/N 6092100 J 5/14/2013

0003 Chemring P/N 6028110-01 N 8/12/2014

0003 DL850AS895 C 10/15/2021

2. SPECIFICATIONS:

CLIN SPECIFICATIONS REVISION REVISION DATE

0001-0002 ANSI ASQ Z1.4 - 10/1/2013

0003 MIL-DTL-82935 - 29 JAN 96

3. For Contractor part number, Contractor submit Product Baseline in accordance with DD1423, sequence number SHALL A001. Any revisions to an approved Product Baseline require resubmission in accordance with DD1423, sequence number A001.

4. Obsolescence Alert Notice: The contractor notify the USG that a pending and/or emergent obsolescence issue exists by submitting a shall Obsolescence Alert Notice in accordance with DD1423, sequence number .A002

5. DMSMS Report: Diminishing Manufacturing Sources and Material Shortages (DMSMS) is the loss, or impending loss, of manufacturers or suppliers of items, raw materials or software. The obsolescence alert notice contain:shall

1. Contractor's Name

2. Contractor's Address

3. Contractor's Phone Number

4. Date of Notification

5. Contract Number

6. Obsolescence Alert Notice Number

7. Affected Equipment Title/Nomenclature

8. Part Number

9. National Stock Number, if applicable

10. Affected Assembly Title/Nomenclature

a. Part Number

b. National Stock Number, if applicable

11. Affected Subassembly/Element/Module Title/Nomenclature

a. Part number

b. National Stock Number, if applicable

12. Contractor's Statement of Impact

13. Contractor's Recommendation to Mitigate Obsolescence Issue/Problem, to include, as applicable:

a. Alternative Sources

b. Hardware Redesign

c. Out of Production Non-Recurring Engineering

14. Contractor's Cost Estimate to Mitigate Obsolescence Issue/Problem

The Contractor submit a DMSMS Health Assessment Report for approval/disapproval as specified in Contract Data Requirements List (CDRL) shall DD Form 1423, sequence number and in accordance with Electronic Code of Federal Regulations (CFR) 48 CFR 2.101. Data delivered using A003 the DMSMS Health Assessment Report will be used to support DMSMS management activities as a part of the Department of Defense (DoD) Total System Life Cycle Management responsibilities.

6. Project Planning Chart: The Contractor submit project planning charts for each production and first article test (FAT) lot for approval shall /disapproval as specified in Contract Data Requirements List (CDRL) DD Form 1423, sequence number . Submittal be 120 days after A004 shall award and every 120 days thereafter until contract close-out actions are completed. The Project Planning Chart depicts the schedule and actual progress of work on a contract. This status or progress report illustrate the amount of work accomplished relative to the work schedule. shall Additionally, the contractor conduct two project management reviews per year with the Government to detail project planning execution with shall he content of the Project Planning Chart include:the customer until contract close-out actions are completed. T shall

1) Depiction of the actual and scheduled progress for each subdivision using horizontal lines and symbols. Actual progress will be noted by a percentage of the completion figure.

2) Subsequent additions to the work breakdown be made as they occur in contract work performance. Items not be deleted even though shall shall work may be cancelled or stopped before completion.

3) Description entry on the chart will be by task. Tasks are divided into subdivisions. Entries be complete and reflect all contract effort.shall

4) Milestone symbol. The triangle symbol will be white if the task has not been achieved. It be shaded if the task has been achieved.shall

5) Date released. Last date to which chart was posted.

6) Date revised. Date of subsequent contract modification.

7) Contractor name.

8) Contract title.

9) Contract number.

10) Purchase description number. Input NSN.

11) Security classification. Refer to Section I.

12) Delivery dates. Includes dates for all deliverable items.

13) Scheduled starting date. Date each subdivision of work is scheduled to start.

14) Actual starting date. Date each subdivision of work actually started.

15) Scheduled completion date. Date each subdivision of work is scheduled for completion.

16) Actual completion date. Date each subdivision of work actually was completed.

SECTION C - CONFIGURATION CONTROL: SAE EIA-649 (NAVY STOCK

CLASS 1377)

1. Configuration Control - The Contractor maintain the total equipment baseline configuration. For items of proprietary design, Contractor shall drawings showing the latest assembly configuration be provided to the Government in electronic format.shall

a. All contractor configuration changes that occurred between contract awards be submitted to the Government for approval shall within 45 days of contract award.

b. Any configuration changes after contract award be submitted within 45 days of contract award.shall

c. All configuration changes be submitted at least 60 days prior to Lot Acceptance Testing.shall

2. Variances - Requests for Variance (RFV) - RFVs be designated as Critical, Major, or Minor. The Contractor submit RFVs using RFV shall shall DD Form 1694 and include information as outlined in SAE EIA-649, Configuration Management S andard, and MIL-HDBK-61, Configuration shall t Management Guidance, for additional guidance on preparation of RFVs.

Note: A copy of the required RFV Form DD Form 1694 is available at:

https://www.esd.whs.mil/Directives/forms/dd1500_1999/

Additional guidance for completion of RFV can be found at the Attachment " This attachment ". RFV Form DD1694 Example Only dated02/14/2024 is incorporated by reference with the same force and effect as if contained herein.

The Contractor's assigned RFV number shall use the following numbering format:

a. The last seven alpha-numeric characters of the contract number followed by a dash ().

b. The letter "V", followed by consecutively assigned numeric characters beginning with 001.

Definitions of RFV Classifications: (See current SAE EIA 649 and MIL-HDBK-61, Configuration Management Guidance, for additional guidance on critical, major and minor classifications.)

Critical: Critical variances impact safety, health, environment, or other critical requirement. A departure from a requirement classified as critical in configuration documentation.

Major: Major variances have significant impacts such as performance or operational limits, structural strength, interchangeability, reliability, survivability, maintainability, durability of the item or repair parts, supportability, cost, effective use or operation, weight or size, or appearance. A departure from a requirement classified as major in configuration documentation.

Minor: Minor variances are issued when departure does not involve any of the factors listed for critical or major variance. Minor variances have little or no impact and are generally associated with non-functional factory defects that can be dispositioned locally as: "use as is" or "after suitable repair". A departure from a requirement classified as minor in configuration documentation.

3. Engineering Change Proposal (ECP) - ECPs be designated as Major (Class I) or Minor (Class II).The Government will maintain shall configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the end-item and its sub-assemblies. Minor (Class II) and Major (Class I) ECP changes be approved by the Navy Configuration Control Board (CCB) and technical shall approval authority prior to implementation. The DD Form 1692 is the preferred format for ECP submissions. ECPs may also be prepared in Contractor format, provided it fulfils the requirements of DD Form 1692, and include information outlined in SAE EIA-649 and MIL-HDBK-shall 61, which provides additional guidance for preparation of ECPs.

ECPs submitted using DD Form 1692 use the following numbering format:shall

a. The last seven alpha-numeric characters of the contract number followed by a dash ().

b. The letters "ECP", followed by consecutively assigned numeric characters beginning with 001.

Definitions of ECP Classifications: (See current SAE EIA 649 and MIL-HDBK-61 for additional guidance on Major (Class I) and Minor (Class II) classifications.)

Major (Class I):

a. A change that affects specified and approved requirements for product attributes, including safety, reliability, and supportability.

b. A change, after establishment of the product baseline, that affects compatibility with interfacing products, including such products as test equipment, support equipment, software, and products furnished by a customer or that affects one or more of the following:

- required calibration to the extent that product identification should be changed

- interchangeability or substitutability of replaceable products, assemblies, or components

- change to add a previously non-qualified supplier, where supplier selection is specified

- requires retrofit of delivered products

c. A change that affect the form, fit, and/or function, and/or requirements, performance, interoperability, supportability, maintainability, cost, safety, addition of a vendor, or a vendor moves facility and the item has not been qualified at that site.

Definitions of form, fit and/or function:

Form: the shape, external size, and marking which uniquely characterizes an item.

Fit: the ability of an item to physically interface or interconnect with and become an integral part of a higher level assembly..

Function: the action[s] that an item is designed to perform including performance, durability and safety.

The following are examples of Major (Class I) changes with regard to function

a. Change to energetic material

b. Change to component material or material properties

c. Change to electrical characteristics.

d. Change in ballistic performance.

Minor (Class II):

a. Affects configuration documentation (released design information), product or processes but does not affect Major Change Criteria.

b. Changes that do not affect the form, fit, or function.

If the Navy technical approval authority does not approve the ECP submitted by the Contractor, then the Contractor is required to revert to the Government approved revision of the drawing per the approved product baseline or to the revision used in the prior lot accepted by the Government.

The Government reserves the right to invoke First Article Testing (FAT) per paragraph 2 of "Section E-CAD/PAD Inspection and Acceptance", or require the Contractor to undergo qualification testing.

4. The Contractor submit an electronic copy of any ECP or RFV to the Contracting Officer, Local DCMA QAR, and the technical activity shall below:

a. Local DCMA QAR

b. NAVSUP WSS Contracting Officer

c. NSWC IHD CAD/PAD Division Acquisition Management Specialist (AMS)

5. Technical approval authority for RFVs and ECPs is NSWC IHD

6. Final approval of any ECP and/or RFV be in writing, by the Contracting Officer, NAVSUP Weapon Systems Support. shall

7. Contractors do not have Material Review Board (MRB) authority.

a. Authorization to accept "as-is" or repair any nonconformance is specifically retained by the Contracting Officer. The contractor's MRB not shall make any use "as-is" or "repair" disposition on any nonconformance, and the MRB recommendations be submitted per paragraph four (4) above.shall

b. Authorization to rework the lot prior to submission to the Government for inspection and acceptance is allowed for all parts, subassemblies, and even the end item that undergoes in-process screening for defects. Such rework under the direction of the contractor must ensure all parts meet the requirements of the Technical Data Package (TDP) and/or detailed specification.

c. Authorization to rework the lot after submission to the Government for inspection and acceptance is specifically retained by the contracting officer.

The MRB recommendations be submitted per paragraph six (6) below. Rework of a lot to correct a deficiency after it has been presented to the shall Government may require the lot number and all the associated records to be changed, per the requirements of MIL-STD-1168.

If the contractor recommends, through an internal MRB, to process non-conforming parts, subassemblies, or the end item for use "as-is" or "repaired", then the contractor will be required to submit a Request for Variance (RFV) to the Government for disposition. If a non-conformance is discovered, which results in a failure of the item to meet the requirements of the TDP or detailed specification after the lot has been presented to the Government, then the contractor will be required to provide to the Government documentation such as RFVs, Discrepancy Reports (DR) related to contractor's MRBs, and/or rework procedures used to correct the deficiency (if applicable).

8. Rework and Repair are defined as follows:

a. Rework: The reprocessing of nonconforming material to make it conform completely to the drawings, specifications or contract requirements.

b. Repair: The reprocessing of nonconforming material in accordance with approved written procedures and operations to reduce, but not completely eliminate, the nonconformance. The purpose of repair is to bring nonconforming material into a usable condition. Repair is distinguished from rework in that the item after repair still does not completely conform to all of the applicable drawings, specifications or contract requirements.

SECTION C - IDENTIFICATION OF COVERED DEFENSE INFORMATION (In Reference to 252.204-7012)

1. In accordance with the DFARS clause at 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting, the Contractor provide adequate security for all government and contractor owned Technical Data Packages (TDPs), drawings and item detail specifications on shall all covered defense information systems that support the performance of work under this contract.

Requirements

SQ03 and SQ04 Initiators are used in the deployment of the Black Box during an emergency. The SR94 is the internal impulse cartridge that provides the explosive energy to the SQ03 & SQ04.

Section D - Packaging and Marking

SECTION D - UID CAD/PAD ITEM MARKING INFORMATION

Unless otherwise specified in the Technical Data Package (TDP), CAD/PAD items meet the Human Readable Information (HRSI) marking shall requirements of paragraph 3.1 of the attachment " . The Machine Readable Information (MRI) Data CAD/PAD Item Marking Instruction Version 1.6" Construct, paragraph 3.2, and Placement of Unique Identification (UID), paragraph 4, are mandatory requirements.

NOTE: UID marking is for investigative units (also known as retains). REQUIRED UID under the WAWF DD250s is not required for reporting investigative units.

SECTION D - PACKING, MARKING, AND TRANSPORTATION

1. Preservation, packaging, packing, and marking be in accordance with MIL-STD-129, MIL-STD-2073, CFR 49 171-178, MIL-STD-130, shall DLAR 4145.41, and Section Five (5) of Specification MIL-DTL-85097E (OS).

2. Packaging and packing for production lots, first article samples and lot acceptance samples be IAW the following by item: shall

CLIN QUP IAW

0001, 1 SPI-PHST-293 REV C, 7/18/2022

0003 1

INNER PACK-ONE CARTRIDGE WITH ONE O-RING (NAS1611-011 OR EQUIVALENT) AND ONE LABEL (DRAWING 850AS904), SHALL BE PACKAGED CONFORMING TO MIL-P-116, SUBMETHOD IID SEALED RIGID METAL CONTAINER OR EQUIVALENT. ADEQUATE SUPPORT AND CUSHIONING SHALL BE PROVIDED FOR THE PACKAGED ITEMS. DUNNAGE MUST BE CHEMICALLY COMPATABLE WITH EXPLOSIVE CONTENT. A TIGHT

PACK IS MANDATORY.

0003 1 OUTER PACK - CARTRIDGES SHALL BE PACKAGED INTO A BOX CONFORMING TO PPP-B-601, STYLE A OR B, OR

TO PPP-B-621, CLASS II, STYLE 4 OR 4 1/2 UNLESS OTHERWISE SPECIFIED. A TIGHT PACK IS MANDATORY.

NOTE: Quantity per Unit Pack (QUP) is defined as the first tie, wrap, or container applied to a single item, or a quantity thereof, or to a group of items of a single stock number, preserved or unpreserved, which constitutes a complete or identifiable package.

3. Labels for Human Readable Information (HRI) and Machine Readable Information (MRI) meet the requirements for a Grade A, Style 2, shall Composition (b) label as specified in MIL-PRF-61002. The performance requirements for solvent and detergent resistance are not required. The label should be the pressure sensitive adhesive type.

4. Human Readable Information (HRI) markings be applied to ammunition, explosives containers and units loads IAW the applicable shall provisions of MIL-STD-129.

a. At a minimum, inner container markings for CLIN 0001 - 003 include: shall

National Stock Number and (DoD) Code: ) (see Section "B" for applicable CLIN

Item Nomenclature: (see Section "B" for applicable CLIN)

Item Assembly Drawing Number: ) (see Section "B" for applicable CLIN

Quantity: As Applicable

Lot Number: IAW MIL-STD-1168

Serial Number: Required ( x ) N/A ( )

b. At a minimum, outer container markings for CLIN 0001 - 0003 include: shall

National Stock Number and (DoD) Code: ) (see Section "B" for applicable CLIN

Item Nomenclature: (see section "B" for applicable CLIN)

Item Assembly Drawing Number: ) (see Section "B" for applicable CLIN

Quantity: As Applicable

Lot Number: IAW MIL-STD-1168

Serial Number: Required ( x) N/A ( )

Gross Weight and Cube: As Applicable

DoD Contract Number: As Applicable

POP Markings: (s ee Section "D" - Packaging, Marking and Transportation paragraph 6a - .) below

UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for )applicable CLIN

CAA: USG DOT 'EX NUMBER'

( )see TABLE 1 EX NUMBER COLUMN below for applicable CLIN Example CAA: USG DOT 880832

TABLE 1: United Nations Shipping / Storage

Information

CLIN NUM

UN PROPER SHIPPING

NAME

UN

NUMBER

HAZARD

CLASS

COMPA.

CODE

NET

EXPLOSIVE

WT (lbs)

EX

NUMBER

CARTRIDGE, POWER

DEVICE

0276 1.4 C 0.000485 2004090201

CARTRIDGE, POWER

DEVICE

0276 1.4 C 0.000485 2004090202

0003 Cartridge, Power Device 0276 1.4 C 0.000485 1987100788A

5. Machine Readable Information (MRI) markings be applied to ammunition, explosive containers and unit loads IAW the following coded shall elements of data from MIL-STD-129. MRI labels able to be read and interpreted by automatic bar code reading devices (scanners). MRI shall markings contain the minimum data elements identified below:shall

a. Inner container:

(N) National Stock Number: (see Section "B" for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section "B" for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section "B" for applicable CLIN)

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required ( x) N/A ( )

b. Outer container:

(N) National Stock Number: (see Section "B" for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section "B" for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section "B" for applicable CLIN)

(7Q) Quantity: As Applicable

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required (x) N/A ( )

NOTE: The parenthesis surrounding the data elements are NOT encoded in the 2D(PDF417) bar code.

6. Shipment of hazardous material (which includes devices containing energetic and explosive material) is subject to the requirements of Title 49, Code of Federal Regulations (CFR), the International Maritime Organization's International Maritime Dangerous Goods (IMDG) Code, and the International Civil Aviation Organization (ICAO) Technical Instructions for the safe transport of hazardous goods. The make all contractor shall shipments of hazardous material in packaging approved by Performance Oriented Packaging (POP) testing within its recertification period. If packaging used exceeds a single periodic retest period as regulated in 49 CFR 178.601 or comes from multiple manufacturers, multiple or additional POP Test Reports covering all periods of manufacture/manufacturers are required.

6a. For special packaging instructions (SPI) of USAF origin, the inquire about receiving a copy of the latest DOD performed POP contractor may test. Inquiry be in writing to the contracting officer a minimum of 30 days prior to need.shall

NOTE: Foreign Military Sales (FMS) Shipments: As applicable, all outer containers should be clearly marked with the FMS Case Designation, Requisition Number and Project Code, and Country Specific EX Numbers for NOA required shipments- See Section "F" for proper identification.

7. Traceable seals are required for all ammunition and ordnance items, including inert configuration items. Traceable seals provide an indication of security, integrity and certification of material serviceability. Traceable seals ensure that the ammunition, ordnance and/or inert item is not pilfered or tampered with after being placed in each shipping container at the time of packaging. The shipping container will normally be the outer container.

The Contractor ensure one of the below traceable seals are properly affixed depending on the type of shipping container.shall

a. Type 1 TRACEABLE SEALS (WIRE SEALS): Type 1 seals are the preferred seals for containers having provisions or means for application of the seals, e.g., metal, plastic, fiberglass, or wood containers with lids or hinged covers, latches, brackets or flanges. A Type 1 seal is, typically, a wire length with an aluminum disk or pellet which is crimped or crushed using a die which imprints a "U.S." symbol on one side of the disk/pellet with an individual's traceable serial number on the reverse side of the disk/pellet.

b. Type 2 SEALS (LABEL SEALS): Type 2 seals are the preferred seals for fiberboard or Styrofoam containers or for metal, plastic, fiberglass or wood containers that will not readily accept Type 1 seals. Type 2 seals are, typically, nonmetallic labels with pressure sensitive backing. They may be pre-printed, stamped or marked with a "U.S." symbol. Type 2 seals be applied such that the label must be cut or defaced in order to open a shall container. Adhesives adhere well enough to prevent peeling during shipping conditions and well enough to prevent lifting and replacement of shall the label. Particular consideration be given to label seals required to adhere to wood and fiberboard surfaces. shall

8. Restrictions Involving Non-Manufactured Wood Packaging (NMWP) and Pallets (per Defense Logistics Agency Directive subpart 47.305-1(c) (90): " wooden pallets and wood containers produced of non-manufactured wood be constructed from Heat Treated (HT to 56 degrees All shall Centigrade for 30 minutes) material and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with Non-manufactured Wood Packing Policy and Non-manufactured Wood Packing Enforcement Regulations, both dated May 30, 2001."

SECTION D - PALLETIZATION

Production Lot units be palletized in accordance MIL-STD-1322, MIL-STD-1322-1000, MIL-STD-129, MIL-STD-130, and CFR 49 171-178 shall with the following exception:

a. Edge protectors be used under all strapping. shall

Section E - Inspection and Acceptance

SECTION E - PRODUCTION LOT TEST SAMPLES )(CONTRACTOR TESTING

1. Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001AA Technical Data See DD1423 See DD1423 See DD1423 See DD1423

0001AB, 0002AB, 0003AB Lot Acceptance Testing

0001AC, 0002AC, 0003AC LAT Investigative Units

Contractor

Contractor

Government

Government

Contractor

Contractor

Government

Government

0001AD, 0002AD - 0002AE, and 0003AD Production Units Contractor Government Contractor Government

If supplies will be packaged at a location different from the offeror address indicated on the solicitation, the offeror provide the name and street shall address of the packaging location:

Packaging House

Address

2. Test samples are required from each production lot and are to be tested in accordance with the approved test plan. A production lot consist of shall the net deliverable quantity plus additional lot test samples and any retained sample units for investigative purposes (if applicable) as detailed in section B.

3. The contractor is allowed to pre-select no more than 30% of the required production lot test samples per lot which have minor external cosmetic defects such as nicks, dings, scratches, paint blemishes, plating blemishes, and small burrs. These units can be used as pre-selected production lot test

The selection of the samples as long as the defects do not create an interference with the form, fit, or function of the unit and/or test fixture.

production lot test samples be noted in a discrepancy report (DR) identifying the item part number, DODIC, contract, lot number, serial numbers shall of the pre-selected units, and the cosmetic defects of each serial number. A copy of the DR be submitted to the Contracting Officer. A second shall copy of the DR be submitted to DCMA/QAR when presenting the production lot for random selection of the remaining lot test samples as stated shall in paragraph 4 below. The contractor also annotate the DR number in the remarks section of the ADC for the applicable production lshall ot. This clause is only applicable to the production lot test samples and the external cosmetic defects mentioned above. If additional units with minor external cosmetic defects are part of the deliverable lot and the contractor would like for the government to accept those units "as is", then a RFV be shall submitted to the Contracting Officer for the determination of disposition for those non-compliant deliverable units.

4. The production lot(s) must be manufactured and presented to the Government Quality Assurance Representative (QAR) with all applicable. The documentation (WAWF-RRs and Ammunition Data Card printed from WARP) accompanying the production contain the contract number, item, shall lot number identification, DODIC, NSN, and serial numbers. The production lot test samples be selected, at random(unless following the shall exception noted in paragraph 3), from each production lot, by the QAR. The retains are considered part of the production lot test samples and shall also be selected, at random, from each production lot, by the QAR and identified as such.

NOTE: Sample units removed for testing from different lots not be commingled.shall

5. Production lot testing be performed by the Contractor within 30 calendar days of production lot sample selection. Production lot testing shall shall be witnessed by at least the cognizant QAR. A representative of the engineering activity may also elect to witness testing, therefore; the Contractor provide written notification to the Contracting Officer, with concurrent notification to the AMS in Section H, and the QAR, at least 10 workingshall days prior to the planned testing date citing the lot number that is ready to be tested. If testing is cancelled within the 10 working day period, the contractor provide notification to the Contracting Officer, with concurrent notification to the engineering activity. At a minimum, cancellation shall notification be sent no later than two days prior to planned test date.shall

NOTE: If a failure occurs during testing and an engineering activity representative is not present, all testing be halted and the shall engineering activity and Contracting Officer be notified within 24 hours A Government representative be allowed to shall . shall participate in the failure investigation in accordance with applicable CDRLs. Contractor testing resume upon notification by the shall Contracting Officer.

6. - Disposition of Production Lot Test Samples

The production lot samples are subjected to Non-Destructive Test (NDT) depending on the requirements delineated by the TDP and/or item specification specified in section C.

The production lot test samples are also subjected to destructive testing. These units cannot be used to meet the total contract quantity.

7. A production lot test report required and be submitted in accordance with the contract data requirement list (CDRL) DD Form 1423, is shall sequence number The test report include all results of testing conducted in accordance with the approved test plan.A005. shall

8. Acceptance, shipment, and payment not be accomplished until the production lot test samples have been tested, the required CDRLs shall received, and the lot has been released for service use. The retains for investigation purposes, if applicable, be shipped to the address provided shall in Section F of the contract after the lot has been released for service use.

9. The only valid and contractually binding notification of production lot approval, conditional approval, or disapproval be in writing and issued shall by the Contracting Officer. This notification be made to the Contractor within fifteen 15 calendar days after the Contracting Officer receives all shall applicable CDRLs. Any CDRLs provided by the Contractor deemed to be inaccurate and/or incomplete after engineering review will automatically reset the notification of production lot approval, conditional approval, or disapproval. Upon receipt of the written approval accepting a production lot

(s) and final approval of the Material Inspection Receiving Report in Wide Area Workflow (WAWF), the Contractor ship the production lot(s) shall as soon as possible and no later than fifteen (15) calendar days after receipt of such notice. Final acceptance of the production lot(s) be the shall responsibility of the cognizant DCMA QAR, but not occur unless and until the production lot approval has been issued in writing by the shall Contracting Officer.

a. Any notice of approval or conditional approval not relieve the Contractor from complying with all requirements of the specifications shall and all other terms and conditions of this contract.

b. A notice of conditional approval may state any further action required by the Contractor.

c. A notice of disapproval may cite reasons for such. In the event of a failure, the Contractor submit a Failure Analysis and Corrective shall Action Report (DD Form 1423, sequence number, ) with all associated costs and expenses to be borne solely by the Contractor. "Failure" is A006 defined as follows:

i. Any of the test samples failing to meet the requirements of the specification and/or drawing,

ii. Any of the test samples fracturing and/or exhibiting any cracks post-firing unless specifically designed to do so,

iii. A non-ignition or failure to fire.

10. At a minimum, the following is required:

a. Failure date

b. Failed part number (e.g. national stock number (NSN), logistics control number, work unit code)

c. Test or mission being performed when the failure occurred(LAT/FAT)

d. Failure symptoms and description of detection or diagnosis methods (e.g. Built In Test)

e. Failure effects (e.g. none, degradation, abort)

f. Repair action (e.g. remove/replace)

g. Failure mode description

h. Failure mechanism/cause of failure

i. Contributing factors, including multiple factor interactions, or secondary effects of the failure

j. Corrective action required to mitigate the failure mode, including:

- Identification of the failure mode

- The recommended process or process control changes, when the failure cause is due to workmanship defects

-Proposals for retrofit of all equipment already delivered or assembled, including recommended effectivity, in accordance with the contract

- Disposition of all defective material and material rendered obsolete because of any necessary redesign, to assure their exclusion from production items

-Identification of previous functional and environmental qualification tests, if any, invalidated by the corrective action changes and recommendation of those tests that should be repeated, in accordance with the terms of the contract, to demonstrate the corrective action's effectiveness.

11. If the production lot test sample is disapproved by the Contracting Officer, the QAR may be required to select an additional production lot test sample(s) for testing. This direction may be given by the Contracting Officer in the notice of disapproval. The Contractor furnish such shall additional production lot test sample(s) under the terms and conditions and within the time specified in the notification. The cost of each additional approval test, and all costs related to such test(s), be borne by the Contractor. Upon approval of the production lot test sample(s) and all shall required CDRLs, the Contracting Officer may, at his/her discretion, equitably adjust the delivery schedule of the contract for only the lot represented by such sample(s). The Government reserves the right to require an equitable decrease of the contract price for any extension of the delivery schedule necessitated by additional test(s) or for any additional costs incurred by the Government due to the need for additional approval test(s).

12. If the Contractor fails to deliver any production lot test sample(s) within the time or times specified, or if the Contracting Officer disapproves any of the required CDRLs, the contract may be deemed to have failed to make delivery within the meaning of the "Default" clause of this contract, and this contract may be subject to termination for default. In such an event, failure of the Government to terminate this contract for default not shall relieve the Contractor of the responsibility to meet the delivery schedule for production quantities.

SECTION E - INSPECTION AND ACCEPTANCE OF TEST PLANS / PROCEDURES

1. The Contractor submit a test plan/procedure for Government approval/disapproval as specified in the Contract Data Requirements List (DD shall Form 1423, sequence number, ). The test plan be submitted within sixty (60) calendar days after contract award date. The A007 shall Acceptance Test Plan identify that test fixtures are available for use at the Contractor's Facility. Any revisions to an approved Test Plan / Procedure require shall resubmission in accordance with DD1423, sequence number ). A007

2. Notification of test plan approval, conditional approval, or disapproval be provided via Wide Area Workflow (WAWF). This notification shall may be made within 30 calendar days after receipt of the Test Plan/Procedure.

3. The notice of approval or conditional approval not relieve the Contractor from complying with all requirements of the specifications and all shall other terms and conditions of this contract.

4. A notice of conditional approval may state any further action required of the Contractor.

5. A notice of disapproval cite the reasons for such. If the plan or procedure is disapproved by the Government, the Contractor may be shall required, at the option of the Government, to submit a revised plan or procedure for evaluation. After each notification by the Government to submit a revised plan or procedure, the Contractor , at no additional cost to the Government, make any necessary revisions or modificathttp://www.shall identrust.com/warp/index.html

The WARP login website is: https://mhpwarp.redstone.army.mil

2. Lot numbers for all explosive components and explosive subassemblies be in accordance with MIL-STD-1168 (Ammunition Lot Numbering shall and Ammunition Data Card), and be included in the components section of the Ammunition Data Card.shall

3. In accordance with the DFARS clause at 252.232-7003, Material Inspection and Receiving Report, the Contractor complete a shall Wide Area Workflow Receiving Report (WAWF-RR) at the time of each delivery (Lot Acceptance or First Article test samples and production lot). Preparation instructions are found in the DFAR Supplement Appendix F.

If the date cited in is an estimated "ship date", the Contractor make distribution of a corrected WAWF-RR indicating the "actual WAWF-RR shall ship date" within 24 hours after actual shipment. The following additional data be furnished on the WAWF-RR: shall

a. Complete lot number, lot expiration date (month and year)

b. Total lot size (consists of net, test, and investigative).

c. Serial numbers of units shipped to consignee.

d. Net quantity shipped to destination.

1. Item quantity shipped to consignee https://mhpwarp.redstone.army.mil

2. Total item quantity shipped to consignee

3. Item quantity due consignee

4. The Contractor make distribution of the ADC and in accordance with the information provided in Section H no later than 24 shall WAWF-RR hours after shipment. When Item 0001, 0002, etc. is indicated under the designator, the Contractor furnish all shipping documents for all shall SUBCLINs under that line item.

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-2 Inspection of Supplies-Fixed-Price. Aug 1996 52.246-16 Responsibility for Supplies. Apr 1984

FAR Clauses Incorporated by Full Text

52.246-11 Higher-Level Contract Quality Requirement. (Dec 2014)

Higher-Level Contract Quality Requirement (Dec 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

ISO-9001:2015.

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

Section F - Deliveries or Performance

SECTION F - DELIVERIES OR PERFORMANCE

Unless otherwise indicated in this contract, accelerated delivery is desirable and acceptable at no additional cost to the Government. The addresses for the activities designated to receive supplies are listed below:

LINE / SUBLINE ITEM AND

QTY

SHIP

TO:

MARK FOR:

(LAT)

0001AB

0002AB

0003AB

8 EA

8 EA

9 EA

SHIP IN PLACE

(testing at contractor's facility)

LOT ACCEPTANCE TEST SAMPLES

(INCLUDE LOT NUMBER AND SERIAL NUMBERS

IN WAWF)

0001AC

0002AC

0003AC

(retains)

2 EA

2 EA

3 EA

N00174

RECEIVING OFFICER

NSWC IHD EXPLOSIVE SCALES

FACILITY

Explosive Scales (BLDG)

RETAIN SAMPLES

ATTN:

Condition Code: D

Ownership Code: 3

LAC: 5N

0001AD

0002AD

36 EA

36 EA

SUPP ADD: DXXPAK

MAPAC: DKUA00 TAC: M

DTS AIR SHIPMENT

Priority: 06

FMS Case: KU-P-PAK

MAPAC: DKUA00 TAC: M

REQN:

PKUA95-0125-6183 (0001AD)

PKUA95-0125-6184 (0002AD)

0002AE

0003AD

1 EA

45 EA

SUPP ADD: DZ4PAI

MAPAC: DSZ004 TAC: 1

NOA IS REQUIRED

Priority: 06

FMS Case: SZ-P-PAI

MAPAC: DSZC00 TAC: M

REQN:

PSZC55-4149-6051 (0002AE)

PSZC55-4149-6052 (0003AD)

NOTE: The above Mark For information is to be noted on the for each applicable subline item. WAWF-RR

CAD/PAD ADDITIONAL NOTES:

a. A WAWF-RR be furnished for each lot of test samples shipped. shall

b. The following data be furnished on the WAWF-RR shipping document. shall

1. Lot Number

2. Lot Size Total (consists of net, test and investigative)

3. Net quantity shipped to consignee

a. Item quantity shipped to consignee

b. Total item quantity shipped to consignee

c. Item quantity due consignee

d. GBL and method of shipment

4. Test units lot size represented by number of test units forwarded for test. (Total test units equals test samples plus investigative or retained samples.)

5. The WAWF-RR be marked as applicable, i.