1.01_CDRLS_Updated_N0010425RK010_T107.pdf

PDF 243 KB Posted Sep 3, 2025

Attached to: 1355-01-387-7738 T107 Suspension Band Set MK89 MOD1
Solicitation number: N0010425RK010
Issued by: Department of the Navy Naval Supply Systems Command

About this file

Written by GovTribe AI · Sep 3, 2025

This document is a Contract Data Requirements List (CDRL) for a federal contract, specifically for Contract Line Item Number 0001 involving system/item 1355-01-387-7738-T107. The CDRL contains six data items (A001-A006) with specific submission requirements for the Naval Undersea Warfare Center (NUWC) at Keyport and Newport:

Key data items include a Test Procedure (A001), Test/Inspection Report (A002), Failure Analysis/Corrective Action Report (A003), Ammo Data Card (A004), Contractor's Progress/Status Report (A005), and Certificate of Compliance (A006). Distribution will include the Contract Administration Office, NAVSUP WSS Contacting Officer, NAVSUP ALC, and NUWC-Keyport. Submission frequencies vary from one-time to monthly, with specific requirements for documentation, quality conformance, and compliance with military standards. The documents must be prepared according to various military specifications, with some items requiring review by Defense Contract Management Command (DCMC) and approval by NAVSEA before final acceptance.

View the file

Other files

File	Type	Posted
3.02_Amendment_0007_N0010425RK010.pdf	PDF	Sep 3, 2025
3.02_Amendment_0006_N0010425RK010.pdf	PDF	Aug 28, 2025
N0010425RK020 00005.pdf	PDF	Jul 28, 2025
3.02_Amendment0004_N0010425RK010.pdf	PDF	Jun 25, 2025
3.02_Amendment0003_N0010425RK010.pdf	PDF	Jun 12, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item) Form Approved OMB No. 0704‐0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704‐0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202‐4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

TDP ☐ TM ☐ OTHER ☐

D. SYSTEM/ITEM

1355‐01‐387‐7738‐T107

E. CONTRACT/PR NO.

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Test Procedure

3. SUBTITLE

17. PRICE GROUP

4. AUTHORITY (Data Acquisition Document No.)

DID‐80603

5. CONTRACT REFERENCE

ALL DRAWINGS

6. REQUIREING OFFICE

NUWC NEWPORT

18. ESTIMATED TOTAL

PRICE

7. DD 250 REQ

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ONE TIME

12. DATE OF FIRST SUBMISSION

30 DADC

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. ADP CODE

11. AS OF DATE

13. DATE OF SUBSEQUENT

SUBMISSION

Draft

Final

Reg Repro

16.REMARKS

THE PLAN IS TO SPECIFY PROCESS CONTROL INSTRUCTIONS AND INSPECTION

PROCEDURES NEEDED TO ENSURE PRODUCT CONFORMANCE TO DRAWINGS,

SPECIFICATIONS, AND CONTRACT REQUIREMENTS IAW ANSI/ASQC Q9000‐2000 OR

EQUIVALENT. THE PLAN IS TO INCLUDE FIRST ARTICLE AND PRODUCTION LOT

QUALITY CONFORMANCE INSPECTION PROCEDURES IAW DI‐NDTI‐80603A ALONG

WITH ALL APPLICABLE DATA ENTRY SHEETS TO BE USED TO DOCUMENT PROCESS

INSPECTIONS.

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

See section H for distribution POC’s and their emails.

SEE BLOCK 16 0 1 0

15. TOTAL 0 1 0

G. PREPARED BY

Robert Kovach

H. DATE

6 June 2024

I. APPROVED BY

LCDR Hardman

J. DATE

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 6 Pages

Form Approved OMB No. 0704‐0188

A. CONTRACT LINE ITEM NO.

D. SYSTEM/ITEM

A002

Test/Inspection Report

3. SUBTITLE

Pre‐Production & Production Test

DID‐80809

ALL DRAWINGS

NUWC KEYPORT

PER LOT

SEE BLOCK 16

8. ADP CODE

Reg Repro

16.REMARKS

THE REPORT IS TO VERIFY PRODUCTION LOT CONFORMANCE TO THE APPLICABLE

DRAWINGS, SPECIFICATIONS, AND CONTRACT REQUIREMENTS. THE REPORT

CONSISTS OF THE PLAN (A001) CONTAINING ALL REQUIRED INSPECTION

RESULTS DOCUMENTED ON THE PLAN’S DATA ENTRY SHEETS. IN ADDITION, THE

REPORT IS TO INCLUDE MATERIAL CERTIFICATIONS AND ALL OTHER PERTINENT

OBJECTIVE QUALITY EVIDENCE. DCMC REVIEWIS REQUIRED PRIOR TO SUBMITTAL

TO NUWC DIVISION KEYPORT. THE REPORT MUST BE APPROVED BY NAVSEA

KEYPORT BEFORE FINAL ACCEPTANCE OF THIS LOT IN WAWF.

BLK 12: DATE OF PRE‐PRODUCTION TEST REPORT SUBMISSION – NLT 15 DAYS

AFTER FIRST ARTICLE TEST COMPLETION.

BLK 13: DATE OF SUBSEQUENT SUBMISSION – NLT 15 DAYS AFTER LOT

ACCEPTANCE TESTING OF SECOND LOT AND BEYOND.

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 2 of 6 Pages

Form Approved OMB No. 0704‐0188

A. CONTRACT LINE ITEM NO.

D. SYSTEM/ITEM

A003

Failure Analysis/Corrective Action Report

DID‐80255

Section E

Reg Repro

16.REMARKS

BLK 5: INCLUDE AND TAKE ACTION ON SECTION I IF FAT IS REQUIRED.

BLK 10: FREQUENCY ‐ IS DETERMINED BY NUMBER OF FAT/LAT FAILURES.

BLK 12: DATE OF FIRST SUBMISSION – NLT AN INTERIM REPORT IS DUE NLT

10 DAYS AFTER NOTIFICATION OF LOT FAILURE. A FINAL REPORT IS DUE 30

DAYS AFTER NOTIFICATION OF LOT FAILURE.

BLK 13: DATE OF SUBSEQUENT SUBMISSION – NLT 10 DAYS AFTER FAT

COMPLETION OF SECOND FAILED LOT AND BEYOND.

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 3 of 6 Pages

Form Approved OMB No. 0704‐0188

A. CONTRACT LINE ITEM NO.

D. SYSTEM/ITEM

A004

Ammo Data Card (ADC)

DI‐MISC‐80043B

Reg Repro

16.REMARKS

BLK 4: DATA CARD SHALL BE PREPARED IN ACCORDANCE WITH MIL‐STD‐1168,

AS CHANGED BY ADL EXCEPTIONS AND THE CONTRACT DOCUMENT LIST BY

ACCESSING THE WORLDWIDE AMMUNITION‐DATA REPOSITORY (WARP) WHICH IS

LOCATED: https://mhpwarp.redstone.army.mil. AN ACCESS REQUEST FORM

MUST BE COMPLETED BEFORE WARP CAN BE ACCESSED. QUESTIONS SPECIFIC TO

WARP SHOULD BE ADDRESSED TO ONE OF THE RESPECTIVE POCs AS LISTED ON

THE WEBSITE.

BLK 10,12,13: DATA CARDS PROVIDED TO NAVSEA PMS‐404 AND THOSE SENT

WITH SHIPMENTS SHALL BE HARDCOPY PRINTOUTS GENEREATED WITH THE WARP

PROGRAM AND SHALL BE SIGNED AND DATED BY THE GOVERNMENT INSPECTOR.

NAVSEA PMS‐404 SUBMISSIONS SHALL ALSO INCLUDE HARDCOPY PRINTOUT OF

SAMPLES CARDS (SEE MIL‐STD‐1168, PARA 4.3.1.4)

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 4 of 6 Pages

Form Approved OMB No. 0704‐0188

A. CONTRACT LINE ITEM NO.

D. SYSTEM/ITEM

A005

Contractor’s Progress, Status and Management Report

DI‐MGMT‐81928

MNTHLY

Reg Repro

16. REMARKS

BLK 11, 12,14: THE DD‐375 REPORT SHALL BE SUBMITTED VIA MAIL OR EMAIL ON OR BEFORE THE 5TH DAY OF EAC

MONTH AFTER CONTRACT AWARD.

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

15. TOTAL

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 5 of 6 Pages

Form Approved OMB No. 0704‐0188

A. CONTRACT LINE ITEM NO.

D. SYSTEM/ITEM

A006

Certificate of Compliance

3. SUBTITLE

Certificate of Compliance

DID‐81356

Reg Repro

16.REMARKS

BLK 5: ENSURE COMPLIANCE IAW ALL DWGs. CERTIFICATES

OF COMPLIANCE (COC) ARE TO BE PROVIDED TO SHOW CONFORMANCE TO ALL

ASSOCIATED DRAWINGS, NOTICES OF REVISION, SPECIFICATIONS, AND

CONTRACT REQUIREMENTS AS PROVIDED IN TECHNICAL DATA PACKAGE.

BLK 9: DISTRIBUTION STATEMENT "D" ‐ DISTRIBUTION AUTHORIZED TO

DOD AND U.S. DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY, EXPORT

CONTROLLED (8/25/2016). OTHER REQUESTS SHALL BE REFERRED TO

PEO‐SUBS (PMS404).

"WARNING" THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET. SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATORS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE PER THE

PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE ‐ FOR UNCLASSIFIED, LIMITED DOCUMENTS,

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

BLKS 10‐13: COC SHALL BE SUBMITTED WITH EACH DELIVERY, INCLUDING

FIRST ARTICLE DELIVERY.

BLK 14: Distribution List

1. Contract Administration Office (CAO)

2. NAVSUP WSS Contracting Officer N772

3. NAVSUP ALC, Code A151

4. NUWC‐Keyport Code N321

15. TOTAL

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 6 of 6 Pages

File details come from the government source that posted it. Updated Sep 3, 2025.