3.02_RFP_N0010422RZB83_Amendment1_21146-0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. CONTRACT ID CODE PAGE OF PAGES

1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X

X 9B. DATED (SEE ITEM 11)

14-JUL-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION

NO. N0010422RZB83

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to extend the response date, update the required delivery date, and answer contractor questions.

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY CODE

NAVSUP WEAPON SYSTEMS SUPPORT

5450 CARLISLE PIKE SUITE 311

MECHANICSBURG PA 17050-2411

N00104 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

3. EFFECTIVE DATE

15 - Aug- 2022

X

X

N0010422RZB83

The response time is extended

FROM:

16 August 2022 at 4:00pm EST

TO:

23 August 2022 at 4:00pm EST

Question: The LCC print ACC 19 203-249230 shows all finished dimensions. The other print provided and mentioned in the SOW, 803-21458027. Propulsion Shafting and Components has note 135 that states that holes should be drilled 1/8” undersized. My concern with this one is the Inboard Coupling Halves. P/N 105 and the inboard coupling, P/N 106. Because these parts are very critical and tolerance specific, will the same rule apply to these items.

Answer: NOTE 135 of the NAVSEA Std. Shafting Dwg. pertains specifically to shaft flanges possessing only taper fitted bolts, and states exactly that. The inboard coupling, however, is configured with a portion of the bolt hole length possessing a slight clearance fit with the bolts (straight) and the other portion on a taper of 1/8” per foot on the diameter. Subsequently, the bolt holes of the collar are completely tapered. As such, the straight portion of the bolt hole length for the inboard coupling can be machined to finished dimension. Given that the smallest diameter of the taper for the inboard coupling assembly is on the FWD end of the collar (3.000” by design), the Naval Surface Warfare Center recommendation would be to machine both the tapered portion of the inboard coupling bolt holes and the collar bolt holes with straight holes measuring 2.875” in diameter. This should leave plenty of material for the installing activity to ream and fit the tapered portions of the bolt holes accordingly.

Delivery information in Section F is updated as follows:

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE

0001 N/A N/A N/A N/A 0001AA 830 dys. ADC 1 TBD FOB: Origin (Shipping Point) 0002 N/A N/A N/A N/A 0002AA 830 dys. ADC 1 TBD FOB: Origin (Shipping Point)

0003 SEE CDRL SEE CDRL SEE CDRL SEE CDRL

FAR 21.211-8 TIME OF DELIVERY (JUN 1997) is updated as follows:

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

Within 830 DAYS After Date OF CONTRACT

Item No. Quantity of Contract

0001AA QTY 1

0002AA QTY 1

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

Within Days After Date Item No. Quantity of Contract

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically.

(The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

All other terms and conditions remain the same.

N0010422RZB83