20NB119 TDP 20200709 JN53 JN54.pdf
PDF 1 MB Posted
- Solicitation number
- N0010420RK090
About this file
This document provides details for two federal contract opportunities. The opportunities are for the procurement of National Stock Numbers 1377-01-658-8532 and 1377-01-658-8542, which are dual output and single output mechanically actuated initiators used in the T-6A and T-6B aircraft. The Department of the Navy Naval Supply Systems Command Mechanicsburg is seeking eligible contractors to manufacture the specified items. Interested parties can submit capability statements in response to the pre-solicitation notice by the closing date to be considered, though award of a sole source contract is at the government's discretion based on responses received. Manufacturing must be in accordance with the technical data and specifications provided in the document appendices.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 12 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
MUNITION NOTICES
NOTES
1. MAY PACK UP TO 10 EACH ITEMS PER SHIPPING CONTAINER.
2. WRAP ITEM USING REF.-3, PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL. PLACE IN SHIPPING CONTAINER AND
USE REF.-1 TO CUSHION AND PREVENT MOVEMENT, AND PREVENT ITEM FROM TOUCHING CONTAINER WALLS.
3. SEAL CONTAINER USING REF.-4.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
IN
C
H
ES
INFORMATION IS FURNISHED FOR EVALUATION
TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE CHANGES REQUIRE WRITTEN APPROVAL OF:
REVSHTDWG NO.
APPLICATION
INCLUDED IN THE INFORMATION DISCLOSED HEREIN. .XXX =
.01
3601 UNION ROAD - HOLLISTER, CALIFORNIA 95023
DO NOT SCALE DRAWING
PRGM
PACIFIC SCIENTIFIC PROPRIETARY RIGHTS ARE
THREADS SHALL BE PER FED-STD-H28.
BY
PROPRIETARY
REMOVE ALL BURRS & SHARP EDGES.
CHECK
ENGR.
MFG.
ENGR.
APPROVALS
TITLE
SIZE CAGE CODE DWG NO.
D
SCALE: 2:1
D
SHEET 1 OF 5
NEXT ASSY USED ON
A
B
348 7 6 5
5678 4 3 1
D
C
D
C
B
A
REV
ALL DIMENSIONS APPLY AFTER FINISH.
837410
DWN. PACIFIC SCIENTIFIC EMC
2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,
837410
FINISH:
ACCEPTABLE IN ANY LOCATION AND TO ANY EXTENT PROVIDED
1557 (E10/01)
CONFIG.
HLP03803
NSWC INDIAN HEAD
A. GARIBAY OCT28,13
D
ENGR.
PURPOSE WITHOUT THE EXPRESSED WRITTEN
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT
DIMENSIONS ARE IN INCHES.
SUBJECT TO SEVERE CRIMINAL PENALTIES.
THIRD ANGLE PROJECTION
DISCLOSED OR REPRODUCED FOR ANY OTHER
PURPOSES ONLY AND SHALL NOT BE USED,
TOLERANCING PER
FILLET RAD: .010 MAX
IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC
JOB/CONTR. NO.:
ANGLES =
.005 ASME Y14.5M-1994.
RAD/CHAM: .010 MAXCONFIGURATION CONTROL.
06331 837410
FINAL
MGR.
THAT ITEM 21 REMAINS FUNCTIONAL.
PART NO.
MGR.
FINAL
CAD: SW
SURFACE FINISH
TREATMENT:
INITIATOR ASSY,
ARM / FIREQ.A.
DECIMALS
.XX =
CONSENT OF PACIFIC SCIENTIFIC.
(CALIFORNIA) LLC
INTERPRET DIMENSIONING &
UNLESS OTHERWISE SPECIFIED:
THIS DOCUMENT UNDER
NOTES: UNLESS OTHERWISE SPECIFIED.
1. -01 ONLY: RADIOGRAPHIC INSPECT PER 500006 AND ASTM E1742
TO VERIFY PRESENCE AND PROPER LOCATION OF ALL VISIBLE
COMPONENTS.
2. THE ASSEMBLY SHALL PERFORM WITHIN THE FOLLOWING
PARAMETERS OVER THE TEMPERATURE RANGE OF -65°F TO +200°F:
TORQUE REQUIREMENT: 6 TO 36 INCH POUNDS.
PULL FORCE REQUIREMENT: 20 TO 40 POUNDS.
3. VENDOR ITEM: SEE SOURCE CONTROL DRAWING.
4. APPLY ITEM 24 TO EDGES DURING APPLICATION OF ITEM 10
OR ITEM 28 TO PREVENT CURLING.
5. APPLY ITEM 22 AND ITEM 23 TO ITEM 13, THEN TORQUE TO 12-15
INCH POUNDS.
6. -01 ONLY: ACCEPTANCE TEST PER TP837463.
7. ITEM 16 SHALL BE TORQUED TO 5 TO 8 IN-LBS.
8. -01 ONLY: NEUTRON RADIOGRAPHIC INSPECT PER 660223 AND
ASTM E748 TO VERIFY PRESENCE AND PROPER LOCATION OF ALL
VISIBLE COMPONENTS.
9. COSMETIC DAMAGE TO ANODIZED SURFACES OF ITEM 21 IS
PER
AGILE
REVISIONS
REV DESCRIPTION DATE APPROVED
D REVISED PER DCN410146
MAR29,16 PER
AGILEAG
SEE SHEET 2 FOR PARTS LIST
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT
SUBJECT TO SEVERE CRIMINAL PENALTIES.
837410
REVSHTDWG NO.
SIZE CAGE CODE
D06331
SCALE: 2:1
A
SHEET 2 OF 5
A
B
348 7 6 5
567 4 3 1
D
C
D
C
B
1558 (E10/01)
2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,
DWG NO.
837410D
REV
IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC
TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE
PROPRIETARY
PACIFIC SCIENTIFIC PROPRIETARY RIGHTS ARE
INCLUDED IN THE INFORMATION DISCLOSED HEREIN.
INFORMATION IS FURNISHED FOR EVALUATION
PURPOSES ONLY AND SHALL NOT BE USED,
DISCLOSED OR REPRODUCED FOR ANY OTHER
PURPOSE WITHOUT THE EXPRESSED WRITTEN
CONSENT OF PACIFIC SCIENTIFIC.
-11/QTY -01/QTY. CAGE PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION ITEM
PARTS LIST
1 - 837409-02 PLATE, IDENTIFICATION 28
1 - 837404-02 SAFE AND ARM HOUSING 27
1 - 837434-01 SPACER 26
AR AR 830163-01 GREASE, MOLYKOTE 33 MEDIUM 25
AR AR 531008 ADHESIVE, PERMABOND (910) 24
AR AR 531045-1 ADHESIVE 23
AR AR 530021 PRIMER 22
1 1 824806-1 FLAG ASSEMBLY, WARNING 21
1 1 824670-2 O-RING 20
1 1 824670-1 O-RING 19
AR AR 161152 LUBRICANT, SILICONE 18
AR AR 531016 ADHESIVE 17
2 2 837474-01 SET SCREW 16
2 2 AS3582-014 O-RING 15
- 1 AS3582-012 O-RING 14
1 1 AN565B1032H5 SET SCREW, 10-32 13
1 1 AS 5169D03 SCREW, BLEED 12
1 1 824669-1 O-RING 11
- 1 837409-01 PLATE, IDENTIFICATION 10
1 1 824668-1 DECAL, STRIPES 9
1 1 837472-01 HANDLE, CROSSBAR 8
1 1 824660-1 DETENT ASSEMBLY 7
1 1 837406-01 RETAINER, THREADED 6
- 1 824649-1 CHARGE ASSEMBLY, TRANSFER 5
1 1 824648-1 PIN, FIRING 4
1 1 824647-1 SLEEVE, FIRING PIN 3
1 1 837407-01 PLUNGER ASSEMBLY, BALL
RELEASE 2
- 1 837404-01 SAFE AND ARM HOUSING 1
INERT
ITEM 21 NOT SHOWN FOR CLARITY
2223 13 10 24
SH4
AA
B
-01 CONFIG
B
06331
REVSHTDWG NO.
SIZE CAGE CODE DWG NO.
837410
SCALE: 4:1
D
REV
SHEET 3 OF 5
A
B
348 7 6 5
5678 4 3 1
D
C
D
C
B
A
INCLUDED IN THE INFORMATION DISCLOSED HEREIN.
837410
D
1558 (E10/01)
3 D
INFORMATION IS FURNISHED FOR EVALUATION
PURPOSES ONLY AND SHALL NOT BE USED,
DISCLOSED OR REPRODUCED FOR ANY OTHER
PURPOSE WITHOUT THE EXPRESSED WRITTEN
CONSENT OF PACIFIC SCIENTIFIC.
PROPRIETARY
PACIFIC SCIENTIFIC PROPRIETARY RIGHTS ARE
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT
IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC
2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,
TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE
SUBJECT TO SEVERE CRIMINAL PENALTIES.
VIEW B
2X
16 7
REVSHTDWG NO.
SIZE CAGE CODE DWG NO.
INCLUDED IN THE INFORMATION DISCLOSED HEREIN.
SCALE: 4:1
D
REV
SHEET 4 OF 5
A
B
348 7 6 5
5678 4 3 1
D
C
D
C
B
A
06331 1558 (E10/01)
837410
837410 4 D
INFORMATION IS FURNISHED FOR EVALUATION
PURPOSES ONLY AND SHALL NOT BE USED,
DISCLOSED OR REPRODUCED FOR ANY OTHER
PURPOSE WITHOUT THE EXPRESSED WRITTEN
CONSENT OF PACIFIC SCIENTIFIC.
PROPRIETARY
PACIFIC SCIENTIFIC PROPRIETARY RIGHTS ARE
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT
IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC
2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,
TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE
SUBJECT TO SEVERE CRIMINAL PENALTIES.
SECTION A-A
6 19
14 18
1815 15 18 17
8 9
1.555.312
-01 CONFIG
REVSHTDWG NO.
SIZE CAGE CODE DWG NO.
INCLUDED IN THE INFORMATION DISCLOSED HEREIN.
SCALE: 4:1
D
REV
SHEET 5 OF 5
A
B
348 7 6 5
5678 4 3 1
D
C
D
C
B
A
06331 1558 (E10/01)
837410
837410 5 D
INFORMATION IS FURNISHED FOR EVALUATION
PURPOSES ONLY AND SHALL NOT BE USED,
DISCLOSED OR REPRODUCED FOR ANY OTHER
PURPOSE WITHOUT THE EXPRESSED WRITTEN
CONSENT OF PACIFIC SCIENTIFIC.
PROPRIETARY
PACIFIC SCIENTIFIC PROPRIETARY RIGHTS ARE
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT
IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC
2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,
TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE
SUBJECT TO SEVERE CRIMINAL PENALTIES.
-11 CONFIG
SAME AS -01 EXCEPT AS SHOWN
27 26 28 24
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 28 JANUARY 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
AutoCAD SHX Text
2169 MOD
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPI NO. F01-658-8542
AutoCAD SHX Text
SPECIAL MARKINGS:
AutoCAD SHX Text
A) SPI NO. F01-658-8542
AutoCAD SHX Text
B) PROPER SHIPPING NAME: FUZES, DETONATING
AutoCAD SHX Text
PACKAGING WAS MANUFACTURED.
AutoCAD SHX Text
C) UN POP MARKING:
AutoCAD SHX Text
**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE
AutoCAD SHX Text
CLOSURE:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
USA/DOD/AF70
AutoCAD SHX Text n
AutoCAD SHX Text 4G/Y8/S/**
AutoCAD SHX Text
UN0367
AutoCAD SHX Text u
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
MILITARY PRESERVATION IAW MIL-STD-2073
AutoCAD SHX Text
PRESERVATIVE: N/A
AutoCAD SHX Text
CLEANING & DRYING: IAW MIL-STD-2073
AutoCAD SHX Text
MARKING IAW MIL-STD-129
AutoCAD SHX Text
UNSERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
QUP
AutoCAD SHX Text
ICQ
AutoCAD SHX Text
MULTIPLE PART NUMBERS
AutoCAD SHX Text
ORIGINAL
AutoCAD SHX Text
INITIATOR, CARTRIDGE ACTUATED
AutoCAD SHX Text 17278
AutoCAD SHX Text
DATE
AutoCAD SHX Text
AUTH.
AutoCAD SHX Text
CHK.
AutoCAD SHX Text
1377-01-658-8542 ES
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
CURRENT
AutoCAD SHX Text
REV
AutoCAD SHX Text P.S.
AutoCAD SHX Text
ILL.
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
DODPOPHM/USA/DOD/AF70/TR17034
AutoCAD SHX Text
SHEET 1 OF 4
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text A
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LEVEL A LEVEL B
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LENGTH WIDTH DEPTH
AutoCAD SHX Text
VARIES
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AS SPECIFIED BELOW AND BILL OF MATERIALS
AutoCAD SHX Text
SPEC STYLE TYPE CL VRTY GR TR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
CNTR I.D.
AutoCAD SHX Text
LTR
AutoCAD SHX Text
ITEM DIM
AutoCAD SHX Text
ITEM WT.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
CNTR O.D.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
GROSS CU FT
AutoCAD SHX Text
GROSS WT LBS
AutoCAD SHX Text
DESIGN FRAGILITY G
AutoCAD SHX Text
ASTM D6251
AutoCAD SHX Text
ASTM D5118
AutoCAD SHX Text
LEVEL
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text
PACKING
AutoCAD SHX Text
DATE
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
AutoCAD SHX Text 16 3/4
AutoCAD SHX Text
AutoCAD SHX Text 1.043
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
K. KNIGHTON D. HALE J. BURLEIGH N. CORONADO
AutoCAD SHX Text F01-658-8542
AutoCAD SHX Text
D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.
AutoCAD SHX Text
RSC
AutoCAD SHX Text
III
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text V3c
AutoCAD SHX Text
IAW: ASTM D1974 SEALING METHOD C
AutoCAD SHX Text
IAW: ASTM D6251
AutoCAD SHX Text
MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.
AutoCAD SHX Text
SERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE
AutoCAD SHX Text 19028
AutoCAD SHX Text A
NOTES
1. MAY PACK UP TO 6 EACH ITEMS PER SHIPPING CONTAINER.
2. WRAP ITEM USING REF.-3, PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL. PLACE IN SHIPPING CONTAINER AND
USE REF.-1 TO CUSHION AND PREVENT MOVEMENT.
3. SEAL CONTAINER USING REF.-4.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE
SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER
PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL
HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 4: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 2 OF 4
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text A/R 1 1 A/R
AutoCAD SHX Text
TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING
AutoCAD SHX Text
3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED
AutoCAD SHX Text ASTM D5486 TYPE I OR V MIL-PRF-81705 TYPE III, CLASS 1 OR 2 MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II, CLASS B
AutoCAD SHX Text -4 -3 -2 -1
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-658-8542
INITIATOR, CARTRIDGE ACTUATED
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 3 OF 4
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text F01-658-8542
AutoCAD SHX Text
INITIATOR, CARTRIDGE ACTUATED
AutoCAD SHX Text
ITEM REFERENCE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 4 OF 4
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text 20 1 2 2 2 1
AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY
AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48
AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1
AutoCAD SHX Text -6 -5 -4 -3 -2 -1
AutoCAD SHX Text
40 BOXES @ 14 LBS NET PALLET WT PLYWOOD WT STRAPPING WT
AutoCAD SHX Text
AutoCAD SHX Text
560 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS
AutoCAD SHX Text
643.35 LBS
AutoCAD SHX Text
CUBE OF PALETIZED LOAD = 48.4
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text F01-658-8542
INITIATOR, CARTRIDGE ACTUATED
| PR Notice: FOR PROCUREMENT: N00104-20-N-B119 - 7/09/2020 |
| DS-C: DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors Administrative or Operational Use, 7/09/2020. Other requests for this document shall be referred to Commanding Officer, NSWC IHEODTD. |
| Destruction: DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document. |
| Export: WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. |
File details come from the government source that posted it. Updated .