N0010419RK047_Amendment_0001.pdf

N0010419NB007

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. The closing date of the subject solicitation is extended to April 29, 2019 02:00 PM local time.

2. Vendors that are w aived for FAT may provide pricing for FAT w aived only. To determine if you are w aived for FAT, please submit inquiry to Steven.Forster1@navy.mil.

3. Section F, FAR 52.211-8 Time of Delivery is amended as show n on the follow ing pages.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-Apr-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0010419RK047

X 9B. DATED (SEE ITEM 11)

14-Mar-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-Apr-2019

CODE

NAVSUP WEAPON SYSTEMS SUPPORT

STEVEN FORSTER, CODE N772.04

5450 CARLISLE PIKE SUITE 410

MECHANICSBURG PA 17050-2411

N00104 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0010419RK047

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION F - DELIVERIES OR PERFORMANCE

The following have been modified:

SECTION F

SECTION F – DELIVERIES OR PERFORMANCE (MAY 2013)

Unless otherwise indicated in this contract, accelerated delivery is desirable and acceptable at no additional cost to the Government. The addresses for the activities designated to receive supplies are listed below:

LINE / SUBLINE ITEM

AND QTY SHIP TO: MARK FOR:

0001AB

(FAT)

66 EA N00174

Indian Head MD

FIRST ARTICLE TEST SAMPLES

0001AC

(retains)

6 EA N00174

RETAIN SAMPLES

0001AD

(LAT)

TBD

N00174

LOT ACCEPTANCE TEST

SAMPLES

0001AE

3 EA N00174

VARIOUS SPONSORS/STOCK POINTS

0002AB

(FAT)

66 EA N00174

FIRST ARTICLE TEST SAMPLES

0002AC

6 EA N00174

0002AD

(LAT)

N00174

LOT ACCEPTANCE TEST

SAMPLES

0002AE

3 EA N00174

VARIOUS SPONSORS/STOCK POINTS

NOTE: The above Mark For information is to be noted on the WAWF-RR for each applicable subline item.

CAD/PAD ADDITIONAL NOTES:

a. A WAWF-RR shall be furnished for each lot of test samples shipped.

b. The following data shall be furnished on the WAWF-RR shipping document.

1. Lot Number

2. Lot Size Total (consists of net, test and investigative)

3. Net quantity shipped to consignee

a. Item quantity shipped to consignee

b. Total item quantity shipped to consignee

c. Item quantity due consignee

d. GBL and method of shipment

4. Test units - lot size represented by number of test units forwarded for test. (Total test units equals test samples plus investigative or retained samples.)

5. The WAWF-RR shall be marked as applicable, i.e., "First Article Test Sample," "Lot Acceptance Test Sample," "Production M/F Stock and Issue" and/or other mark for (M/F) instructions contained in this section.

SECTION F – REPORT OF SHIPMENT (MAR 2016)

The Contractor shall provide an advanced Report of Shipment (REPSHIP) per clause 52.247-68 to the AMS listed in Section G no later than 24 hours prior to the shipment arrival, and for ammunition shipments no later than two hours after shipment departure. Failure to provide a REPSHIP can result in shipments being denied at point of disembarkation and returned to the point of embarkation for reshipment at the contractor’s expense. A REPSHIP can be in the contractor’s format but shall include at a minimum all the following data:

REPSHIP Data Requirements for Individual Shipments of Hazardous Material (HAZMAT) and Inert Component Parts - Continental United States (CONUS) to CONUS, CONUS to Overseas or From All Overseas Locations

FROM: Shipping Activity To: IHEODTD AMS (See Section H)

SUBJ: Report of Shipment (REPSHIP)

1. Shipment Date written as a three-digit day of the year (Julian)

2. Estimated Time of Arrival (ETA) written as a three-digit day of the year (Julian) (Observe Standard Transit

Time (STT), if CONUS Truck Shipment and no Required Delivery Date (RDD) identified)

3. Required Delivery Date (RDD) or Delivery Date (DD), if specified

4. Carrier

5. Bill of Lading (BL) Number (Notes 1, 2, 3, 4)

6. Military Traffic Expediting-Greater Security (MTX-GS) Service Number (Notes 1, 2, 3)

7. Air Release Number (Notes 1, 2, 3) or for Surface Shipments, Export Traffic Release (ETR) Number and

Vessel Name and/or Voyage Document Number

8. Shipment (Cargo) Name (Example: Bombs)

9. Container and Seal Number (if applicable):

a. Container Transportation Control Number (TCN)

b. Total Weight of Contents

c. Rounds, Pieces, Weight, Cube, Condition code, and Lot Numbers (Note 4)

10. Security Risk Category (SRC), (E.G., Security Risk Category I, II, III, IV, Unclassified, Confidential, Secret, None)

11. Controlled Item Inventory Code (CIIC)

12. Total Net Explosive Weight (NEW)

13. Hazard Classification (s)

14. Department of Defense Identification Code / Navy Ammunition Logistic Code (DODIC/NALC). (Note 4).

15. Name, address, and phone number of person responsible for information contained in REPSHIP

NOTES:

1. When the conveyance contains more than one shipment unit, repeat the data elements in separately lettered paragraphs for each shipment unit.

2. Cargo for more than one vessel or flight, but shipped to Port of Embarkation (POE) in a single conveyance, is included in a single REPSHIP. When cargo for a single vessel is moved to the Seaport of Embarkation (SPOE) in more than one conveyance, repeat all the data elements as above in separate numbered paragraphs for each conveyance or REPSHIP.

3. A separate REPSHIP is used for each mode of shipment to the POE.

4. Lot number, DODIC and NALC are not mandatory fields. If available, they may be provided in the electronic

RESHIP or in the template above. If a CBL is used, the lot number and ammunition condition code should be included in the remarks section. Weapons must be identified on the CBL by each serial number contained within the shipment.

5. DODIC and NALC are codes used specifically for logistic administration and control of ammunition.

SECTION F – FOREIGN MILITARY SALES (FMS) SHIPMENTS (FEB 2006)

The Cognizant DCMA Transportation Office shall forward copies of the Notice of Availability for all FMS shipments to the activities listed below:

COMMANDER NSWC IHEODTD FAX: 301-744-6699 ATTN: CODE: AMS Per Section H

*52.211-8 TIME OF DELIVERY

The Government requires delivery to be made according to the following schedule:

Delivery KEY:

FAT = First Article Test DAFATA = Days After FAT Approval LAT = Lot Acceptance Test DALATA = Days After LAT Approval

DADC = Days After Date of Contract DAR-GFP = Days After Receipt of GFP Assets

*If FAT waived DAFATA shall be DADC.

REQUIRED DELIVERY SCHEDULE

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered non-responsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFERORS PROPOSED DELIVERY SCHEDULE

ITEM Quantity Days A001 Product Baseline 1 SET 120 DADC

A002 POP 1 SET 420 DADC

A003 Failure Analysis (LAT Failure Report) A/R A/R

A004 Acceptance Test Plan (RTT) 1 SET 420 DADC A005 Radiographic Report and Film 1 SET 420 DADC A006 Failure Analysis (FAT Failure Report) A/R A/R

A007 Ammunition Data Card (preliminary) 1 SET 420 DADC

0001AB (FAT Samples) 66 EA 420 DADC 0001AC (FAT Retains) 3 420 DADC 0001AD (LAT Samples) TBD 420 DAFATA* 0001AE (LAT Investigative Units) TBD 420 DAFATA* 0001AF (deliverable units) TBD 510 DAFATA* A007 Ammunition Data Card (Final) 1 SET 510 DAFATA* 0002AB (FAT Samples) 66 EA A/R 0002AC (FAT Retains) TBD A/R 0002AD (LAT Samples) TBD 420 DAFATA* 0002AE (LAT Retains) TBD 510 DAFATA* 0002AF (deliverable units) TBD 510 DAFATA*

(b) Attent ion is direct ed to the

Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered non-responsive and rejected.

(End of Summary of Changes)

A001 Product Baseline 1 SET

A002 POP 1 SET

A003 Failure Analysis (LAT Failure Report) A/R

A004 Acceptance Test Plan (RTT) 1 SET A005 Radiographic Report and Film 1 SET A006 Failure Analysis (FAT Failure Report) A/R

A007 Ammunition Data Card (preliminary) 1 SET

0001AB (FAT Samples) 66 EA 0001AC (FAT Retains) 3 0001AD (LAT Samples) TBD 0001AE (LAT Investigative Units) TBD 0001AF (deliverable units) TBD A007 Ammunition Data Card (Final) 1 SET 0002AB (FAT Samples) 66 EA 0002AC (FAT Retains) TBD 0002AD (LAT Samples) TBD 0002AE (LAT Retains) TBD 0002AF (deliverable units) TBD