RFP_N0010418RK042_Amendment_0001.pdf

N010418NB051

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1) To correct Shipping Locations for Clins 0001AN and 0001 AQ.

2) To correct Government Proposed delivery schedule.

3) To extend proposal due by date.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 9

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Feb-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0010418RK042

X 9B. DATED (SEE ITEM 11)

11-Jan-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Feb-2018

CODE

NAVSUP WEAPON SYSTEMS SUPPORT

KEITH KOVACS, CODE N742.19

5450 CARLISLE PIKE

P.O. BOX 2020

MECHANICSBURG PA 17055

N00104 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0010418RK042

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 14-Feb-2018 02:00 PM to 21-Feb-2018 02:00 PM.

SECTION B - SUPPLIES OR SERVICES AND PRICES

SUBCLIN 0001AN

The CLIN extended description has changed from:

NSN 1377-01-215-4821 (Chemring)NSN 1377-01-114-2036 (UTAS, CA)JAU-25/A Mechanical Actuated Initiator NAVAIR Drawing: 850AS130FY18 FMS: CN-P-PADDOC: 18P16CN

To:

NSN 1377-01-215-4821 (Chemring)NSN 1377-01-114-2036 (UTAS, CA)JAU-25/A Mechanical Actuated Initiator NAVAIR Drawing: 850AS130FY18 PANMC, Ownership Code: 5TAC: NVFS

SUBCLIN 0001AQ

The CLIN extended description has changed from:

NSN 1377-01-215-4821 (Chemring)NSN 1377-01-114-2036 (UTAS, CA) JAU-25/A Mechanical Actuated Initiator NAVAIR Drawing: 850AS130FY18 FMS: CN-P-PADDOC: 18P18CN Ownership Code: 8

To:

NSN 1377-01-215-4821 (Chemring)NSN 1377-01-114-2036 (UTAS, CA) JAU-25/A Mechanical Actuated Initiator NAVAIR Drawing: 850AS130FY18 PANMC, Ownership Code: 5TAC: NVFS

SECTION F - DELIVERIES OR PERFORMANCE

The following have been modified:

SECTION F

SECTION F – DELIVERIES OR PERFORMANCE (MAY 2013)

Unless otherwise indicated in this contract, accelerated delivery is desirable and acceptable at no additional cost to the Government. The addresses for the activities designated to receive supplies are listed below:

LINE / SUBLINE ITEM

AND QTY SHIP TO: MARK FOR:

0001AB 60 EA N00174 FIRST ARTICLE TEST SAMPLES

LINE / SUBLINE ITEM

(FAT) Indian Head MD

0001AC

(retains)

6 EA N00174

Indian Head MD

FAT RETAIN SAMPLES

0001AD

(LAT)

82 EA

N00174

LOT ACCEPTANCE TEST

SAMPLES

0001AE

(retains)

6 EA N00174

LAT RETAIN SAMPLES

0001AF

6 EA Q97112

ST Charles, MO

FY17 F/A-18E

0001AG 12 EA Q97112

FY17 F/A-18F

0001AH 14 EA Q97112

FY18 F/A-18E

0001AJ 44 EA N48521

Amarillo, TX

FY18 AH-1Z ZBN LOT 15

0001AK 4 EA N48521

FY18 AH-1Z ZBN LOT 14

0001AL 2 EA N48521

FY18 AH-1Z ZBN LOT 15

0001AM 30 EA SUPP ADD: DZ4PAD

MAPAC: DSZ004 TAC: M

NOA IS REQUIRED –

USE SDDG EX2013031091

PRIORITY: 06

FMS CASE: SZ-P-PAD

MAPAC: DSZC00 TAC: M

REQUISITION: PSZC55-3231-6038

0001AN 10 EA N00174

RECEIVING OFFICER

NSWC IHEODTD EXPLOSIVE SCALES

FACILITY

5021 Safe Haven Way Indian Head, MD 20640-5173

NAVY STOCK & ISSUE

COG 2E

FY18 PANMC

CONDITION CODE: A

Ownership Code: 5

0001AP 22 EA Q97112

ST. CHARLES, MO

KAF FA-18E FY17 (INSTALL)

FMS CASE: KU-P-

REQUISITION:

0001AQ 16 EA N00174

RECEIVING OFFICER

NSWC IHEODTD EXPLOSIVE SCALES

FACILITY

5021 Safe Haven Way Indian Head, MD 20640-5173

NAVY STOCK & ISSUE

COG 2E

FY18 PANMC

CONDITION CODE: A

Ownership Code: 5

0001AR 12 EA Q97112

ST. CHARLES, MO

KAF FA-18F FY17 (INSTALL)

FMS CASE: KU-P-

REQUISITION:

0001AS 480 EA N00174

FY18 PANMC

LINE / SUBLINE ITEM

0001AT 4 EA Q97112

FY17 F/A-18F OCO

NOTE: The above Mark For information is to be noted on the WAWF-RR for each applicable subline item.

CAD/PAD ADDITIONAL NOTES:

a. A WAWF-RR shall be furnished for each lot of test samples shipped.

b. The following data shall be furnished on the WAWF-RR shipping document.

1. Lot Number

2. Lot Size Total (consists of net, test and investigative)

3. Net quantity shipped to consignee

a. Item quantity shipped to consignee

b. Total item quantity shipped to consignee

c. Item quantity due consignee

d. GBL and method of shipment

4. Test units - lot size represented by number of test units forwarded for test. (Total test units equals test samples plus investigative or retained samples.)

5. The WAWF-RR shall be marked as applicable, i.e., "First Article Test Sample," "Lot Acceptance Test Sample," "Production M/F Stock and Issue" and/or other mark for (M/F) instructions contained in this section.

SECTION F – REPORT OF SHIPMENT (MAR 2016)

The Contractor shall provide an advanced Report of Shipment (REPSHIP) per clause 52.247-68 to the AMS listed in Section G no later than 24 hours prior to the shipment arrival, and for ammunition shipments no later than two hours after shipment departure. Failure to provide a REPSHIP can result in shipments being denied at point of disembarkation and returned to the point of embarkation for reshipment at the contractor’s expense. A REPSHIP can be in the contractor’s format but shall include at a minimum all the following data:

REPSHIP Data Requirements for Individual Shipments of Hazardous Material (HAZMAT) and Inert Component Parts - Continental United States (CONUS) to CONUS, CONUS to Overseas or From All Overseas Locations

FROM: Shipping Activity To: IHEODTD AMS (See Section H)

SUBJ: Report of Shipment (REPSHIP)

1. Shipment Date written as a three-digit day of the year (Julian)

2. Estimated Time of Arrival (ETA) written as a three-digit day of the year (Julian) (Observe Standard Transit

Time (STT), if CONUS Truck Shipment and no Required Delivery Date (RDD) identified)

3. Required Delivery Date (RDD) or Delivery Date (DD), if specified

4. Carrier

5. Bill of Lading (BL) Number (Notes 1, 2, 3, 4)

6. Military Traffic Expediting-Greater Security (MTX-GS) Service Number (Notes 1, 2, 3)

7. Air Release Number (Notes 1, 2, 3) or for Surface Shipments, Export Traffic Release (ETR) Number and

Vessel Name and/or Voyage Document Number

8. Shipment (Cargo) Name (Example: Bombs)

9. Container and Seal Number (if applicable):

a. Container Transportation Control Number (TCN)

b. Total Weight of Contents

c. Rounds, Pieces, Weight, Cube, Condition code, and Lot Numbers (Note 4)

10. Security Risk Category (SRC), (E.G., Security Risk Category I, II, III, IV, Unclassified, Confidential, Secret, None)

11. Controlled Item Inventory Code (CIIC)

12. Total Net Explosive Weight (NEW)

13. Hazard Classification (s)

14. Department of Defense Identification Code / Navy Ammunition Logistic Code (DODIC/NALC). (Note 4).

15. Name, address, and phone number of person responsible for information contained in REPSHIP

NOTES:

1. When the conveyance contains more than one shipment unit, repeat the data elements in separately lettered paragraphs for each shipment unit.

2. Cargo for more than one vessel or flight, but shipped to Port of Embarkation (POE) in a single conveyance, is included in a single REPSHIP. When cargo for a single vessel is moved to the Seaport of Embarkation (SPOE) in more than one conveyance, repeat all the data elements as above in separate numbered paragraphs for each conveyance or REPSHIP.

3. A separate REPSHIP is used for each mode of shipment to the POE.

4. Lot number, DODIC and NALC are not mandatory fields. If available, they may be provided in the electronic

RESHIP or in the template above. If a CBL is used, the lot number and ammunition condition code should be included in the remarks section. Weapons must be identified on the CBL by each serial number contained within the shipment.

5. DODIC and NALC are codes used specifically for logistic administration and control of ammunition.

SECTION F – FOREIGN MILITARY SALES (FMS) SHIPMENTS (FEB 2006)

The Cognizant DCMA Transportation Office shall forward copies of the Notice of Availability for all FMS shipments to the activities listed below:

COMMANDER NSWC IHEODTD FAX: 301-744-6699 ATTN: CODE: AMS Per Section H

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule or sooner at no additional cost to the Government. :

REQUIRED DELIVERY SCHEDULE

KEY:

DADC = Days after Date of Contract DAFATA = Days after First Article Test Acceptance

Delivery Schedule (No FAT - Gov Testing)

Item Quantity Days A001 (Product Baseline) - 210 DADC

A004 (Radiographic Test Technique) - 210 DADC

A003 (FAR/CAR) - A/R

Lot 1

0001AD (LAT) 50 450 DADC

0001AE (Investigative Units) 3 450 DADC A005 (Radiographic Report and Film) - 450 DADC

A006 (Configuration Marriage Record) - 450 DADC

A002 (POP) - 450 DADC

A008 (Ammo Data Card, Provisional) - 450 DADC A008 (Ammo Data Card, Final) - 465 DADC

0001AF (Deliverable Units) 6 540 DADC 0001AG (Deliverable Units) 12 540 DADC 0001AH (Deliverable Units) 14 540 DADC 0001AJ (Deliverable Units) 44 540 DADC 0001AK (Deliverable Units) 4 540 DADC 0001AL (Deliverable Units) 2 540 DADC 0001AM (Deliverable Units) 30 540 DADC 0001AN (Deliverable Units) 10 540 DADC 0001AP (Deliverable Units) 22 540 DADC 0001AQ (Deliverable Units) 16 540 DADC 0001AR (Deliverable Units) 12 540 DADC 0001AS (Deliverable Units) 235 540 DADC 0001AT (Deliverable Units) 4 540 DADC

Lot 2

0001AD (LAT) 32 510 DADC

0001AE (Investigative Units) 3 510 DADC A005 (Radiographic Report and Film) - 510 DADC

A006 (Configuration Marriage Record) - 510 DADC

A002 (POP) - 510 DADC

A008 (Ammo Data Card, Provisional) - 510 DADC A008 (Ammo Data Card, Final) - 525 DADC

0001AS (Deliverable Units) 245 600 DADC

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

Delivery Schedule (No FAT - Gov Testing)

A001 (Product Baseline) - A004 (Radiographic Test Technique) -

A003 (FAR/CAR) - A/R

Lot 1

0001AD (LAT) 50

0001AE (Investigative Units) 3

A005 (Radiographic Report and Film) - A006 (Configuration Marriage Record) -

A002 (POP) -

A008 (Ammo Data Card, Provisional) -

A008 (Ammo Data Card, Final) - 0001AF (Deliverable Units) 6 0001AG (Deliverable Units) 12 0001AH (Deliverable Units) 14 0001AJ (Deliverable Units) 44 0001AK (Deliverable Units) 4 0001AL (Deliverable Units) 2 0001AM (Deliverable Units) 30 0001AN (Deliverable Units) 10 0001AP (Deliverable Units) 22 0001AQ (Deliverable Units) 16 0001AR (Deliverable Units) 12 0001AS (Deliverable Units) 235 0001AT (Deliverable Units) 4

Lot 2

0001AD (LAT) 32

0001AE (Investigative Units) 3 A005 (Radiographic Report and Film) -

A006 (Configuration Marriage Record) -

A002 (POP) -

A008 (Ammo Data Card, Provisional) - A008 (Ammo Data Card, Final) -

0001AS (Deliverable Units) 245

Delivery Schedule (With FAT - Gov Testing)

A001 (Product Baseline) - A004 (Radiographic Test Technique) -

A003 (FAR/CAR)(LAT) -

FAT

A007 (FAR/CAR)(FAT) -

0001AB (FAT) 60

0001AC (FAT) 3

A005 (Radiographic Report and Film) - A006 (Configuration Marriage Record) - A008 (Ammo Data Card, Provisional) -

Lot 1

0001AD (LAT) 50

0001AE (Investigative Units) 3 A005 (Radiographic Report and Film) -

A006 (Configuration Marriage Record) -

A002 (POP) -

A008 (Ammo Data Card, Provisional) - A008 (Ammo Data Card, Final) -

0001AF (Deliverable Units) 6 0001AG (Deliverable Units) 12 0001AH (Deliverable Units) 14 0001AJ (Deliverable Units) 44 0001AK (Deliverable Units) 4 0001AL (Deliverable Units) 2 0001AM (Deliverable Units) 30 0001AN (Deliverable Units) 10 0001AP (Deliverable Units) 22 0001AQ (Deliverable Units) 16 0001AR (Deliverable Units) 12 0001AS (Deliverable Units) 235 0001AT (Deliverable Units) 4

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

(End of Summary of Changes)